The mechanism for cleavage of three typical glucosidic bonds induced by hydroxyl free radical

Structural characterization of a Chlorella heteropolysaccharide by analyzing its depolymerized product and finding an inducer of human dendritic cell maturation

Chlorella polysaccharides have been gaining increasing attention because of their high yield from dried Chlorella powder and their remarkable immunomodulatory activity. In this study, the major polysaccharide fraction, CPP-3a, in Chlorella pyrenoidosa, was isolated, and its detailed structure was investigated by analyzing the low-molecular-weight product prepared via free radical depolymerization. The results indicated that CPP-3a with a molecular weight of 195.2 kDa was formed by →2)-α-L-Araf-(1→, →2)-α-D-Rhap-(1→, →5)-α-L-Araf-(1→, →3)-β-D-Glcp-(1→, →4)-α-D-Glcp-(1→, →4)-α-D-GlcpA-(1→, →2,3)-α-D-Manp-(1→, →3,4)-α-D-Manp-(1→, →3,4)-β-D-Galp-(1→, →3,6)-β-D-Galp-(1→, and →2,3,6)-α-D-Galp-(1→ residues, branched at C2, C3, C4, or C6 of α/β-D-Galp and α-D-Manp, and terminated by α/β-L-Araf, α-L-Arap, α-D-Galp, and β-D-Glcp. Biological assays showed that CPP-3a significantly altered the dendritic morphology of immature dendritic cells (DCs). Enhanced CD80, CD86, and MHC I expression on the cell surface and decreased phagocytic ability indicated that CPP-3a could induce the maturation of DCs. Furthermore, CPP-3a-stimulated DCs not only stimulated the proliferation of allogeneic naïve CD4+ T cells and the secretion of IFN-γ, but also directly stimulated the activation and proliferation of CD8+ T cells through cross-antigen presentation. These findings indicate that CPP-3a can promote human DC maturation and T-cell stimulation and may be a novel DC maturation inducer with potential developmental value in DC immunotherapy.

High-density zwitterionic polymer brushes exhibit robust lubrication properties and high antithrombotic efficacy in blood-contacting medical devices

High-performance catheters are essential for interventional surgeries, requiring reliable anti-adhesive and lubricated surfaces. This article develops a strategy for constructing high-density sulfobetaine zwitterionic polymer brushes on the surface of catheters, utilizing dopamine and sodium alginate as the primary intermediate layers, where dopamine provides mussel-protein-like adhesion to anchor the polymer brushes to the catheter surface. Hydroxyl-rich sodium alginate increases the number of grafting sites and improves the grafting mass by more than 4 times. The developed high-density zwitterionic polymer brushes achieve long-lasting and effective lubricity (μ<0.0078) and are implanted in rabbits for four hours without bio-adhesion and thrombosis in the absence of anticoagulants such as heparin. Experiments and molecular dynamics simulations demonstrate that graft mass plays a decisive role in the lubricity and anti-adhesion of polymer brushes, and it is proposed to predict the anti-adhesion of polymer brushes by their lubricity to avoid costly and time-consuming bioassays during the development of amphoteric polymer brushes. A quantitative influence of hydration in the anti-adhesion properties of amphiphilic polymer brushes is also revealed. Thus, this study provides a new approach to safe, long-lasting lubrication and anticoagulant surface modification for medical devices in contact with blood. STATEMENT OF SIGNIFICANCE: High friction and bioadhesion on medical device surfaces can pose a significant risk to patients. In response, we have developed a safer, simpler, and more application-specific surface modification strategy that addresses both the lubrication and anti-bioadhesion needs of medical device surfaces. We used dopamine and sodium alginate as intermediate layers to drastically increase the grafting density of the zwitterionic brushes and enabled the modified surfaces to have an extremely low coefficient of friction (μ = 0.0078) and to remain non-bioadhesive for 4 hours in vivo. Furthermore, we used molecular dynamics simulations to gain insight into the mechanisms behind the superior anti-adhesion properties of the high-density polymer brushes. Our work contributes to the development and application of surface-modified coatings.

Degradation Mechanisms of Six Typical Glucosidic Bonds of Disaccharides Induced by Free Radicals

Increasing hydrogen peroxide (H2O2)-based systems have been developed to degrade various polysaccharides due to the presence of highly reactive free radicals, but published degradation mechanisms are still limited. Therefore, this study aimed to clarify the degradation mechanism of six typical glucosidic bonds from different disaccharides in an ultraviolet (UV)/H2O2 system. The results showed that the H2O2 concentration, disaccharide concentration, and radiation intensity were important factors affecting pseudo-first-order kinetic constants. Hydroxyl radical, superoxide radical, and UV alone contributed 58.37, 18.52, and 19.17% to degradation, respectively. The apparent degradation rates ranked in the order of cellobiose ≈ lactose > trehalose ≈ isomaltose > turanose > sucrose ≈ maltose. The reaction pathways were then deduced after identifying their degradation products. According to quantum chemical calculations, the cleavage of α-glycosidic bonds was more kinetically unfavorable than that of β-glycosidic bonds. Additionally, the order of apparent degradation rates depended on the energy barriers for the formation of disaccharide-based alkoxyl radicals. Moreover, energy barriers for homolytic scissions of glucosidic C1-O or C7-O sites of these alkoxyl radicals ranked in the sequence: α-(1 → 2) ≈ α-(1 → 3) < α-(1 → 4) < β-(1 → 4) < α-(1 → 6) < α-(1 → 1) glucosidic bonds. This study helps to explain the mechanisms of carbohydrate degradation by free radicals.

Preparation of low molecular weight chondroitin sulfate from different sources by H2O2/ascorbic acid degradation and its degradation mechanism

Low molecular weight chondroitin sulfate (LMCS) has attention for enhanced bioavailability and bioactivity compared to native CS. We optimized H2O2/ ascorbic acid (Vc) degradation conditions to prepare LMCS from chicken, bovine, and shark cartilages. Degradation kinetics models and chemical composition data of LMCS showed the GlcA residues of chondroitin-4-sulfate (CSA) may be preferentially attacked. Nuclear magnetic resonance (NMR) spectroscopy and high-performance liquid chromatography-electrospray mass spectrometry (HPLC-MS) indicated that the CH of GlcA in CS was broken through a hydrogen abstraction reaction to break the β-(1 → 3) bond and form the hexendioic acid product. Standard density functional theory (DFT) calculations indicated that the energy required for the hydrogen abstraction from the C1-H bond in GlcA was lower than that of GalNAc. Molecular dynamics (MD) showed that CSA was more likely to interact with hydroxyl radicals (·OH) than non-sulfated chondroitin (CSO) and chondroitin-6-sulfate (CSC). These results provide guidance for producing LMCS.

An efficient, catalyst-free and aqueous ethanol-mediated synthesis of 5-((2-aminothiazol-5-yl)(phenyl)methyl)-6-hydroxypyrimidine-2,4(1H,3H)-dione derivatives and their antioxidant activity

In this study, we effectively developed a catalyst-free multicomponent synthesis of 5-((2-aminothiazol-5-yl)(phenyl)methyl)-6-hydroxypyrimidine-2,4(1H,3H)-dione derivatives employing 2-aminothiazole, N',N'-dimethyl barbituric acid/barbituric acid and different aldehydes at 80 °C in an aqueous ethanol medium (1 : 1) using group-assisted purification (GAP) chemistry. The essential characteristics of this methodology include superior green credential parameters, metal-free multicomponent synthesis, faster reaction times, greater product yields, simple product purification without column chromatography and higher product yields. All of the synthesized compounds were analyzed against the HepG2 cell line. Compounds 4j and 4k shows good anti-proliferative effects on HepG2 cells. Furthermore, the ABTS and DPPH scavenging assays were used to determine the antioxidant activity of all compounds (4a-r). In both ABTS and DPPH radical scavenging assays, compounds 4e, 4i, 4j, 4o and 4r exhibit excellent potency compared to the standard ascorbic acid.

Microwave assisted free radical degradation of Schisandra polysaccharides: Optimization, identification and application

In order to establish structural-fingerprinting of polysaccharides for improvement of quality assessment, a sample preparation method based on microwave assisted free radical degradation (MFRD) of plant polysaccharides was proposed to produce oligosaccharides and small M_w polysaccharides. As a case study of Schisandra chinensis and S. sphenanthera fruit polysaccharides (SCP and SSP), the MFRD condition (i.e., 100 °C, 30 s and 80 W) was confirmed to be optimal. The potential structures of the MFRD products of SCP and SSP were further discussed by combinations of HILIC-ESI^--QTOF-MS^E and HILIC-ESI^--Q-OT-IT-MS/MS. As followed, multivariable statistical analysis shows a clear separation of SCP and the SSP in PCA and OPLS-DA plots based HILIC-ESI^--QTOF-MS^E data. The VIP plot unveils several key Q-markers (e.g., peaks 3, 8, 9, 10, 15, 25, 26, 28, 29 and 30) with significant differences and stable emergences. Furthermore, a low-polymerization compositional fingerprinting was successfully constructed for SCP and SSP using a high-performance anion-exchange chromatography with pulsed amperometric detection. Compared to the conventional sample preparation methods, the MFRD took only a few thousandth of the time to accomplish degradations of plant polysaccharides. It significantly improves sample preparations and is generally applicable to various polysaccharide samples.

Influence of Molecular Weight of Polysaccharides from Laminaria japonica to LJP-Based Hydrogels: Anti-Inflammatory Activity in the Wound Healing Process

In this study, polysaccharides from Laminaria japonica (LJP) were produced by the treatment of ultraviolet/hydrogen peroxide (UV/H2O2) degradation into different molecular weights. Then, the degraded LJP were used to prepare LJP/chitosan/PVA hydrogel wound dressings. As the molecular weight of LJP decreased from 315 kDa to 20 kDa, the swelling ratio of the LJP-based hydrogels rose from 14.38 ± 0.60 to 20.47 ± 0.42 folds of the original weight. However, the mechanical properties of LJP-based hydrogels slightly decreased. With the extension of the UV/H2O2 degradation time, the molecular weight of LJP gradually decreased, and the anti-inflammatory activities of LJP-based hydrogels gradually increased. LJP that were degraded for 60 min (60-gel) showed the best inhibition effects on proinflammatory cytokines, while the contents of TNF-α, IL-6, and IL-1β decreased by 57.33%, 44.80%, and 67.72%, respectively, compared with the Model group. The above results suggested that low Mw LJP-based hydrogels showed great potential for a wound dressing application.

Free radical-mediated degradation of polysaccharides: Mechanism of free radical formation and degradation, influence factors and product properties

Increasing studies focus on the degradation of polysaccharides by free radicals. The review mainly provides an overview of degradation of polysaccharides by free radicals generated from hydrogen peroxide (H₂O₂). Evidence suggests that free radicals generated from H₂O₂ can be generated by various mechanisms. It broke glycosidic bonds mainly through hydrogen abstraction, causing the degradation of polysaccharides. Its degradation efficiency is affected by many factors, such as the concentration of polysaccharides and H₂O₂, temperature and pH. In addition, free radical degradation could change the physicochemical and structural properties of polysaccharides, such as water solubility, thermal stability, molecular weight, monosaccharide composition, apparent morphology, and chain conformation, but it had little effects on the primary structure of polysaccharides. Besides, free radical degradation could also improve the bioactivities of polysaccharides, including antioxidant, antitumor and anticoagulant activities.

Influence of UV/H2O2 treatment on polysaccharides from Sargassum fusiforme: Physicochemical properties and RAW 264.7 cells responses

There are few studies on seaweed polysaccharides with UV/H2O2 treatment, so the aim of this study was to evaluate the effects of UV/H2O2 treatment on physicochemical properties and RAW 264.7 cells responses of polysaccharides from Sargassum fusiforme (PSF). Results showed that the contents of reducing sugar and sulfate in PSF with UV/H2O2 treatment for 2 h increased by 202.86% and 31.77%, respectively, and the contents of total sugar, protein and uronic acid decreased by 14.29%, 57.11% and 43.18% compared with those of original polysaccharides. In addition, UV/H2O2 treatment did not change the monosaccharide types of original polysaccharides, but it could change its monosaccharide composition and surface morphology. Besides, polysaccharides after UV/H2O2 treatment for 0.5-2 h had lower toxicity than original polysaccharides in RAW 264.7 cells. Typically, PSF with UV/H2O2 treatment for 2 h (PSF-T2) could effectively inhibit pro-inflammatory molecules production (including NO, IL-1β, IL-6 and TNF-α), and down-regulate related genes expression (including Tlr4, Irak, Il-1β, Il-6, Il-12 and Tnf-α). Therefore, UV/H2O2 treatment is a potential way to prepare polysaccharide with better anti-inflammatory activity.

An Overview of Biopolymeric Electrospun Nanofibers Based on Polysaccharides for Wound Healing Management

Currently, despite the thoroughgoing scientific research carried out in the area of wound healing management, the treatment of skin injuries, regardless of etiology remains a big provocation for health care professionals. An optimal wound dressing should be nontoxic, non-adherent, non-allergenic, should also maintain a humid medium at the wound interfacing, and be easily removed without trauma. For the development of functional and bioactive dressings, they must meet different conditions such as: The ability to remove excess exudates, to allow gaseous interchange, to behave as a barrier to microbes and to external physical or chemical aggressions, and at the same time to have the capacity of promoting the process of healing by stimulating other intricate processes such as differentiation, cell adhesion, and proliferation. Over the past several years, various types of wound dressings including hydrogels, hydrocolloids, films, foams, sponges, and micro/nanofibers have been formulated, and among them, the electrospun nanofibrous mats received an increased interest from researchers due to the numerous advantages and their intrinsic properties. The drug-embedded nanofibers are the potential candidates for wound dressing application by virtue of: Superior surface area-to volume ratio, enormous porosity (can allow oxy-permeability) or reticular nano-porosity (can inhibit the microorganisms'adhesion), structural similitude to the skin extracellular matrix, and progressive electrospinning methodology, which promotes a prolonged drug release. The reason that we chose to review the formulation of electrospun nanofibers based on polysaccharides as dressings useful in wound healing was based on the ever-growing research in this field, research that highlighted many advantages of the nanofibrillary network, but also a marked versatility in terms of numerous active substances that can be incorporated for rapid and infection-free tissue regeneration. In this review, we have extensively discussed the recent advancements performed on electrospun nanofibers (eNFs) formulation methodology as wound dressings, and we focused as well on the entrapment of different active biomolecules that have been incorporated on polysaccharides-based nanofibers, highlighting those bioagents capable of improving the healing process. In addition, in vivo tests performed to support their increased efficacy were also listed, and the advantages of the polysaccharide nanofiber-based wound dressings compared to the traditional ones were emphasized.

Electrospun fibers based on carbohydrate gum polymers and their multifaceted applications

Electrospinning has garnered significant attention in view of its many advantages such as feasibility for various polymers, scalability required for mass production, and ease of processing. Extensive studies have been devoted to the use of electrospinning to fabricate various electrospun nanofibers derived from carbohydrate gum polymers in combination with synthetic polymers and/or additives of inorganic or organic materials with gums. In view of the versatility and the widespread choice of precursors that can be deployed for electrospinning, various gums from both, the plants and microbial-based gum carbohydrates are holistically and/or partially included in the electrospinning solution for the preparation of functional composite nanofibers. Moreover, our strategy encompasses a combination of natural gums with other polymers/inorganic or nanoparticles to ensue distinct properties. This early established milestone in functional carbohydrate gum polymer-based composite nanofibers may be deployed by specialized researchers in the field of nanoscience and technology, and especially for exploiting electrospinning of natural gums composites for diverse applications.

Deeper insight into hydrolysis mechanisms of polyester/cotton blended fabrics for separation by explicit solvent models

Aiming to get a deeper and accurate understanding on separation of polyester/cotton blended fabrics in subcritical water, the hydrolysis mechanisms of cellulose and polyester were studied using dispersion-corrected density functional theory (DFT-D) method with and without explicit H₂O under the conductor-like screening model (COSMO) set. The number and locations of explicit H₂O were determined by their likely functions including being dissociation and solvent and catalyst. The calculations disclosed that explicit H₂O provide inductive activation on glycosidic bond of cellulose and ester groups at the center of polyester and the assistance on the transfer of proton as proton-carrier and as catalyst of proton shuttle, affecting the reaction and activation energies in a realistic manner. In addition, the number of explicit H₂O molecules functioning as catalyst of proton shuttle may also has a strong influence on catalytic activity. Based on the improved explicit solvation models, the overall activation energies of proposed hydrolysis mechanisms for cellulose and polyester are 14.81 and 21.46 kcal/mol respectively, which explains the preferential hydrolysis of cellulose from experimental results.

Influence of nanomaterial morphology of guar-gum fracturing fluid, physical and mechanical properties

Nanosilica, multiwalled carbon nanotubes and graphite powder have different effects on guar gum fracturing fluid because of the different morphologies of these nanomaterials. The results showed that the apparent viscosity, temperature tolerance, elastic modulus and tensile strength of nano-hybrid guar gum fracturing fluids were improved by nanomaterials compared to those properties of blank fracturing fluid (without nanomaterials). However, microscopic analysis by SEM and TEM revealed that different nanomaterials played different roles in the network structure of guar gum fracturing fluid. In terms of micro particle size, modified nano-SiO₂ (M-NS) played a nuclear point and skeleton role in the fracturing fluid and obviously enhanced the network structure. Hydroxylated multiwalled carbon nanotubes (MWNTs-OH) and guar gum macromolecular chains were intertwined. Graphene oxide (GO) intercalation entered the guar gum molecular chain and the interaction was relatively weak because of its sheet structure.

Supplementary data for the mechanism for cleavage of three typical glucosidic bonds induced by hydroxyl free radical

The data presented in this article are related to the research article entitled “The mechanism for cleavage of three typical glucosidic bonds induced by hydroxyl free radical” (Dai et al., 2017) [1]. This article includes the structures of three kinds of disaccharides such as maltose, fructose and cellobiose, the diagrammatic sketch of the hydrogen abstraction reaction of the disaccharides by hydroxyl radical, the structure of the transition states for pyran ring opening of moiety A and cleavage of α(1→2) glycosidic bond starting from the hydrogen abstraction of C6–H in moiety A of sucrose, the transition state structure for cleavage of α(1→2) glycosidic bond starting from the hydrogen abstraction of C1′-H in moiety B of sucrose, the transition state structure, sketch for the reaction process and relative energy change of the reaction pathway for direct cleavage of α(1→4) glycosidic bond starting from hydrogen abstraction of C6′–H of moiety B of maltose.