The development of an alginate/polycaprolactone composite scaffold for in situ transfection application

Resveratrol and ceftriaxone encapsulated in hybrid nanoparticles to prevent dopaminergic neurons from degeneration for Parkinson's disease treatment

The purpose of this study is to evaluate the influence of phospholipid-polymer nanoparticles (PNPs) on mitogen-activated protein kinase (MAPK)/extracellular signal-regulated kinase (ERK) signaling of dopaminergic neurons in degenerated brain. Resveratrol (RES)- and ceftriaxone (CEF)-entrapped PNPs with surface leptin (Lep) and transferrin (Tf) were fabricated to rescue both 1-methyl-4-phenylpyridinium (MPP+)-insulted SH-SY5Y cells and Wistar rats. Based on PNPs, anti-apoptosis of RES and CEF, and targeting of Lep and Tf were investigated. Experimental results revealed that 20-30 % alginic acid (Alg) yielded the maximal particle size, physical stability and entrapment efficiency of CEF, and the minimal release percentage of CEF. Increasing Alg content in PNPs decreased the entrapment efficiency of RES, and facilitated the release of RES. Optimized PNP composition was about 40 % Alg, 15 % phosphatidylserine and 45 % poly-ε-caprolactone. Lep-Tf-PNPs ameliorated brain permeability of RES and CEF without jeopardizing the blood-brain barrier, and promoted the viability of MPP+-insulted SH-SY5Y cells. Immunofluorescence images and western blots of MPP+-insulted SH-SY5Y cells showed that Lep-Tf-RES-CEF-PNPs upregulated dopamine transporter, tyrosine hydroxylase, B-cell lymphoma 2 (Bcl-2), cyclic AMP response element-binding protein and ERK5 expressions, and downregulated Bcl-2-associated X protein (Bax), α-synuclein (α-syn), phosphorylated tau protein (p-tau), c-Jun N-terminal kinase and ERK1/2 expressions. Lep-Tf-RES-CEF-PNPs unveiled a strong capacity to recover Bcl-2, Bax, α-syn and p-tau levels from MPP+ injury in the substantia nigra of rats. Hence, Lep-Tf-RES-CEF-PNPs can retard α-syn fibril formation, prevent tau protein from phosphorylation, and moderate MAPK/ERK and phosphatidylinositol 3-kinase/protein kinase B, and are promising for brain- and neuron-targeted pharmacotherapy to manage Parkinson's disease.

Electrospun PCL/Alginate/Nanoclay Nerve Conduit with Olfactory Ectomesenchymal Stem Cells for Nerve Regeneration

Biocompatible and biodegradable nerve growth conduits (NGCs) provide a promising alternative to conventional nerve grafting for peripheral nerve regeneration. Incorporating nanoclay (NC) has been shown to increase the hydrophilicity and flexibility of polymeric scaffolds. In the present study, poly caprolactone-alginate (PCL-ALG) conduits with varying percentages of NC (0.1%, 0.2%, and 0.5%) were fabricated using the electrospinning technique. The conduit containing 0.5% NC showed a greater increase in elongation (33%) and porosity, reaching 95% with the lowest contact angle (10°). For in vitro, human olfactory ectomesenchymal stem cells (OE-MSCs) were used as a favorable choice for neuronal differentiation owing to the origin from the neural crest. The viability and proliferation of OE-MSCs were maintained after 5 days on scaffolds with 0.5% NC, as confirmed by the MTT assay, cell adhesion analysis, and live/dead staining. Furthermore, the impact of 0.5% PCL-ALG-NC on the paracrine activity of OE-MSCs was studied for a period of 7 days. Our results indicated that human OE-MSCs, when cocultured with PC12 cells on NGC, have the capability to release nerve growth factor levels of up to 1392.83 pg/mL. In summary, the electrospun PCL-ALG conduit containing an optimal NC dosage (0.5%) and seeded with human OE-MSCs shows promising outcomes as NGC scaffold for peripheral nerve regeneration.

Antimicrobial, antioxidant and cytocompatible coaxial wet-spun fibers made of polycaprolactone and cellulose acetate loaded with essential oils for wound care

Chronic wounds represent a serious worldwide concern, being often associated with bacterial infections. As the prevalence of bacterial infections increase, it is crucial to search for alternatives. Essential oils (EOs) constitute a promising option to antibiotics due to their strong anti-inflammatory, analgesic, antioxidant and antibacterial properties. However, such compounds present high volatility. To address this issue, a drug delivery system composed of coaxial wet-spun fibers was engineered and different EOs, namely clove oil (CO), cinnamon leaf oil (CLO) and tea tree oil (TTO), were loaded. Briefly, a coaxial system composed of two syringe pumps, a coagulation bath of deionized water, a cylindrical-shaped collector and a coaxial spinneret was used. A 10 % w/v polycaprolactone (PCL) solution was combined with the different EOs at 2 × minimum bactericidal concentration (MBC) and loaded to a syringe connected to the inner port, whereas a 10 % w/v cellulose acetate (CA) solution mixed with 10 % w/v polyethylene glycol (PEG) at a ratio of 90:10 % v/v (to increase the fibers' elasticity) was loaded to the syringe connected to the outer port. This layer was used as a barrier to pace the release of the entrapped EO. The CA's inherent porosity in water coagulation baths allowed access to the fiber's core. CA was also mixed with 10 % w/v polyethylene glycol (PEG) at a ratio of 90:10 % v/v (CA:PEG), to increase the fibers' elasticity. Microfibers maintained their structural integrity during 28 days of incubation in physiological-like environments. They also showed high elasticities (maximum elongations at break >300 %) and resistance to rupture in mechanical assessments, reaching mass losses of only ≈ 2.29 % - 57.19 %. The EOs were released from the fibers in a prolonged and sustained fashion, in which ≈ 30 % of EO was released during the 24 h of incubation in physiological-like media, demonstrating great antibacterial effectiveness against Staphylococcus aureus, Staphylococcus epidermidis, Escherichia coli and Pseudomonas aeruginosa, the most prevalent bacteria in chronic wounds. Moreover, microfibers showed effective antioxidant effects, presenting up to 59 % of reduction of 2,2-diphenyl-1-picrylhydrazyl (DPPH) activity. Furthermore, the coaxial system was deemed safe for contact with fibroblasts and human keratinocytes, reaching metabolic activities higher than 80 % after 48 h of incubation. Data confirmed the suitability of the engineered system for potential therapeutics of chronic wounds.

Biomedical potentials of alginate via physical, chemical, and biological modifications

Alginate is a linear polysaccharide with a modifiable structure and abundant functional groups, offers immense potential for tailoring diverse alginate-based materials to meet the demands of biomedical applications. Given the advancements in modification techniques, it is significant to analyze and summarize the modification of alginate by physical, chemical and biological methods. These approaches provide plentiful information on the preparation, characterization and application of alginate-based materials. Physical modification generally involves blending and physical crosslinking, while chemical modification relies on chemical reactions, mainly including acylation, sulfation, phosphorylation, carbodiimide coupling, nucleophilic substitution, graft copolymerization, terminal modification, and degradation. Chemical modified alginate contains chemically crosslinked alginate, grafted alginate and oligo-alginate. Biological modification associated with various enzymes to realize the hydrolysis or grafting. These diverse modifications hold great promise in fully harnessing the potential of alginate for its burgeoning biomedical applications in the future. In summary, this review provides a comprehensive discussion and summary of different modification methods applied to improve the properties of alginate while expanding its biomedical potentials.

Development of bio-based polymeric blends - a comprehensive review

The current impetus to develop bio-based polymers for greater sustainability and lower carbon footprint is necessitated due to the alarming depletion of fossil resources, concurrent global warming, and related environmental issues. This article reviews the development of polymeric blends based on bio-based polymers. The focus on bio-based polymers is due to their greater 'Sustainability factor' as they are derived from renewable resources. The article delves into the synthesis of both conventional and highly biodegradable bio-based polymers, each crafted from feedstocks derived from nature's bounty. What sets this work apart is the exploration of blending existing bio-based polymers, culminating in the birth of entirely new materials. This review provides a comprehensive overview of the recent advancements in the development of bio-based polymeric blends, covering their synthesis, properties, applications, and potential contributions to a more sustainable future. Despite their potential benefits, bio-based materials face obstacles such as miscibility, processability issues and disparities in physical properties compared to conventional counterparts. The paper also discusses significance of compatibilizers, additives and future directions for the further advancement of these bio-based blends. While bio-based polymer blends hold promise for environmentally benign applications, many are still in the research phase. Ongoing research and technological innovations are driving the evolution of these blends as viable alternatives, but continued efforts are needed to ensure their successful integration into mainstream industrial practices. Concerted efforts from both researchers and industry stakeholders are essential to realize the full potential of bio-based polymers and accelerate their adoption on a global scale.

Sodium alginate-based multifunctional sandwich-like system for treating wound infections

Microbial colonization and development of infections in wounds is a sign of chronicity. The prevailing approach to manage and treat these wounds involves dressings. However, these often fail in effectively addressing infections, as they struggle to both absorb exudates and maintain optimal local moisture. The system here presented was conceptualized with a three-layer design: the outer layer made of a fibrous polycaprolactone (PCL) film, to act as a barrier for preventing microorganisms and impurities from reaching the wound; the intermediate layer formed of a sodium alginate (SA) hydrogel loaded with ampicillin (Amp) for fighting infections; and the inner layer comprised of a fibrous film of PCL and polyethylene glycol (PEG) for facilitating cell recognition and preventing wound adhesion. Thermal evaluations, degradation, wettability and release behavior testing confirmed the system resistance overtime. The sandwich demonstrated the capability for absorbing exudates (≈70 %) and exhibited a controlled release of Amp for up to 24 h. Antimicrobial testing was performed against Staphylococcus aureus and Escherichia coli, as representatives of Gram-positive and Gram-negative bacteria: >99 % elimination of bacteria. Cell cytotoxicity assessments showed high cytocompatibility levels, confirming the safety of the proposed sandwich system. Adhesion assays confirmed the system ease of detaching without mechanical effort (0.37 N). Data established the efficiency of the sandwich-like system, suggesting promising applications in infected wound care.

Electrospun/3D-Printed Bicomponent Scaffold Co-Loaded with a Prodrug and a Drug with Antibacterial and Immunomodulatory Properties

This work reports the construction of a bicomponent scaffold co-loaded with both a prodrug and a drug (BiFp@Ht) as an efficient platform for wound dressing, by combining the electrospinning and 3D-printing technologies. The outer component consisted of a chitosan/polyethylene oxide-electrospun membrane loaded with the indomethacin-polyethylene glycol-indomethacin prodrug (Fp) and served as a support for printing the inner component, a gelatin methacryloyl/sodium alginate hydrogel loaded with tetracycline hydrochloride (Ht). The different architectural characteristics of the electrospun and 3D-printed layers were very well highlighted in a morphological analysis performed by Scanning Electron Microscopy (SEM). In vitro release profile studies demonstrated that both Fp and Ht layers were capable to release the loaded therapeutics in a controlled and sustained manner. According to a quantitative in vitro biological assessment, the bicomponent BiFp@Ht scaffold showed a good biocompatibility and no cytotoxic effect on HeLa cell cultures, while the highest proliferation level was noted in the case of HeLa cells seeded onto an Fp nanofibrous membrane. Furthermore, the BiFp@Ht scaffold presented an excellent antimicrobial activity against the E. coli and S. aureus bacterial strains, along with promising anti-inflammatory and proangiogenic activities, proving its potential to be used for wound dressing.

Sodium alginate/polycaprolactone co-axial wet-spun microfibers modified with N-carboxymethyl chitosan and the peptide AAPV for Staphylococcus aureus and human neutrophil elastase inhibition in potential chronic wound scenarios

In chronic wound (CW) scenarios, Staphylococcus aureus-induced infections are very prevalent. This leads to abnormal inflammatory processes, in which proteolytic enzymes, such as human neutrophil elastase (HNE), become highly expressed. Alanine-Alanine-Proline-Valine (AAPV) is an antimicrobial tetrapeptide capable of suppressing the HNE activity, restoring its expression to standard rates. Here, we proposed the incorporation of the peptide AAPV within an innovative co-axial drug delivery system, in which the peptide liberation was controlled by N-carboxymethyl chitosan (NCMC) solubilization, a pH-sensitive antimicrobial polymer effective against Staphylococcus aureus. The microfibers' core was composed of polycaprolactone (PCL), a mechanically resilient polymer, and AAPV, while the shell was made of the highly hydrated and absorbent sodium alginate (SA) and NCMC, responsive to neutral-basic pH (characteristic of CW). NCMC was loaded at twice its minimum bactericidal concentration (6.144 mg/mL) against S. aureus, while AAPV was loaded at its maximum inhibitory concentration against HNE (50 μg/mL), and the production of fibers with a core-shell structure, in which all components could be detected (directly or indirectly), was confirmed. Core-shell fibers were characterized as flexible and mechanically resilient, and structurally stable after 28-days of immersion in physiological-like environments. Time-kill kinetics evaluations revealed the effective action of NCMC against S. aureus, while elastase inhibitory activity examinations proved the ability of AAPV to reduce HNE levels. Cell biology testing confirmed the safety of the engineered fiber system for human tissue contact, with fibroblast-like cells and human keratinocytes maintaining their morphology while in contact with the produced fibers. Data confirmed the engineered drug delivery platform as potentially effective for applications in CW care.

Carbohydrate polymer-based nanocomposites for breast cancer treatment

Breast cancer is known as the most common invasive malignancy in women with the highest mortality rate worldwide. This concerning disease may be presented in situ (relatively easier treatment) or be invasive, especially invasive ductal carcinoma which is highly worrisome nowadays. Among several strategies used in breast cancer treatment, nanotechnology-based targeted therapy is currently being investigated, as it depicts advanced technological features able of preventing drugs' side effects on normal cells while effectively acting on tumor cells. In this context, carbohydrate polymer-based nanocomposites have gained particular interest among the biomedical community for breast cancer therapy applications due to their advantage features, including abundance in nature, biocompatibility, straightforward fabrication methods, and good physicochemical properties. In this review, the physicochemical properties and biological activities of carbohydrate polymers and their derivate nanocomposites were discussed. Then, various methods for the fabrication of carbohydrate polymer-based nanocomposites as well as their application in breast cancer therapy and future perspectives were discussed.

Alginate-Based Bio-Composites and Their Potential Applications

Over the last two decades, bio-polymer fibers have attracted attention for their uses in gene therapy, tissue engineering, wound-healing, and controlled drug delivery. The most commonly used bio-polymers are bio-sourced synthetic polymers such as poly (glycolic acid), poly (lactic acid), poly (e-caprolactone), copolymers of polyglycolide and poly (3-hydroxybutyrate), and natural polymers such as chitosan, soy protein, and alginate. Among all of the bio-polymer fibers, alginate is endowed with its ease of sol–gel transformation, remarkable ion exchange properties, and acid stability. Blending alginate fibers with a wide range of other materials has certainly opened many new opportunities for applications. This paper presents an overview on the modification of alginate fibers with nano-particles, adhesive peptides, and natural or synthetic polymers, in order to enhance their properties. The application of alginate fibers in several areas such as cosmetics, sensors, drug delivery, tissue engineering, and water treatment are investigated. The first section is a brief theoretical background regarding the definition, the source, and the structure of alginate. The second part deals with the physico-chemical, structural, and biological properties of alginate bio-polymers. The third part presents the spinning techniques and the effects of the process and solution parameters on the thermo-mechanical and physico-chemical properties of alginate fibers. Then, the fourth part presents the additives used as fillers in order to improve the properties of alginate fibers. Finally, the last section covers the practical applications of alginate composite fibers.

Polysaccharide-based nanofibers for pharmaceutical and biomedical applications: A review

Nanofibers are fibrous nanocarriers that can be synthesized from natural polymers, synthetic polymers, semiconducting materials, composite materials, and carbon-based materials. Recently, natural polysaccharides-based nanofibers are gaining attention in the field of pharmaceuticals and biomedical as these are biocompatible, biodegradable, non-toxic, and economic. Nanofibers can deliver a significant amount of drug to the targeted site and provide effective interaction of therapeutic agent at the site of action due to a larger surface area. Other important advantages of nanofibers are low density, high porosity, small pore size, high mechanical strength, and low cost. In this review, natural polysaccharides such as alginate, pullulan, hyaluronic acid, dextran, cellulose, chondroitin sulfate, chitosan, xanthan gum, and gellan gum are discussed for their characteristics, pharmaceutical utility, and biomedical applications. The authors have given particular emphasis to the several fabrication processes that utilize these polysaccharides to form nanofibers, and their recent updates in pharmaceutical applications such as drug delivery, tissue engineering, skin disorders, wound-healing dressings, cancer therapy, bioactive molecules delivery, anti-infectives, and solubility enhancement. Despite these many advantages, nanofibers have been explored less for their scale-up and applications in advanced therapeutic delivery.

Electrospun-Fibrous-Architecture-Mediated Non-Viral Gene Therapy Drug Delivery in Regenerative Medicine

Gene-based therapy represents the latest advancement in medical biotechnology. The principle behind this innovative approach is to introduce genetic material into specific cells and tissues to stimulate or inhibit key signaling pathways. Although enormous progress has been achieved in the field of gene-based therapy, challenges connected to some physiological impediments (e.g., low stability or the inability to pass the cell membrane and to transport to the desired intracellular compartments) still obstruct the exploitation of its full potential in clinical practices. The integration of gene delivery technologies with electrospun fibrous architectures represents a potent strategy that may tackle the problems of stability and local gene delivery, being capable to promote a controlled and proficient release and expression of therapeutic genes in the targeted cells, improving the therapeutic outcomes. This review aims to outline the impact of electrospun-fibrous-architecture-mediated gene therapy drug delivery, and it emphatically discusses the latest advancements in their formulation and the therapeutic outcomes of these systems in different fields of regenerative medicine, along with the main challenges faced towards the translation of promising academic results into tangible products with clinical application.

Marine Biopolymers as Bioactive Functional Ingredients of Electrospun Nanofibrous Scaffolds for Biomedical Applications

Marine biopolymers, abundantly present in seaweeds and marine animals, feature diverse structures and functionalities, and possess a wide range of beneficial biological activities. Characterized by high biocompatibility and biodegradability, as well as unique physicochemical properties, marine biopolymers are attracting a constantly increasing interest for the development of advanced systems for applications in the biomedical field. The development of electrospinning offers an innovative technological platform for the production of nonwoven nanofibrous scaffolds with increased surface area, high encapsulation efficacy, intrinsic interconnectivity, and structural analogy to the natural extracellular matrix. Marine biopolymer-based electrospun nanofibrous scaffolds with multifunctional characteristics and tunable mechanical properties now attract significant attention for biomedical applications, such as tissue engineering, drug delivery, and wound healing. The present review, covering the literature up to the end of 2021, highlights the advancements in the development of marine biopolymer-based electrospun nanofibers for their utilization as cell proliferation scaffolds, bioadhesives, release modifiers, and wound dressings.

Design of new bioinspired GO-COOH decorated alginate/gelatin hybrid scaffolds with nanofibrous architecture: structural, mechanical and biological investigations

The current research study deals with the design and investigation of novel bioinspired and biocompatible GO-COOH decorated hybrid polymeric scaffolds with nanofibrous architecture as biomaterials with highly appropriate features for functional restoration of damaged tissue. Gelatin and alginate, two biobased-polymers with excellent biocompatibility, high microenvironment biomimicry and ability for proper guidance of cell development in combination with carboxylated graphene oxide (GO-COOH), embody the matrix of electrospun hybrid scaffolds. The underlying principle is based on various types of interactions that can take place between the functionalities of the system's entities (proved by DLS) and their synergy in improving the structural integrity, mechanical tailorability and biological performances of the new nanofibrous GO-COOH decorated hybrid scaffolds. The nanofibrous structure along with the presence of GO-COOH are established by SEM. The new covalent bonds formed between various functionalities of the protein-polysaccharide-GO-COOH system are proved by FTIR and XPS. The physico-chemical state of GO-COOH lattices within the hybrid structures is investigated by Raman spectrometry. The interpenetrated network of bicomponent structures determines a 10-fold increase of Young's modulus as compared to monocomponent counterparts while the dispersion of GO-COOH significantly increases the elasticity of materials. The biological results (MTT and LDH assays) indicate a good cytocompatibility of crosslinked bicomponent AGS scaffolds; the metabolic cellular activity is substantially improved following the GO-COOH addition, suggesting that GO-COOH can support the cell adhesion, growth and proliferation.

Electrospun Alginate Nanofibers Toward Various Applications: A Review

Alginate has been a material of choice for a spectrum of applications, ranging from metal adsorption to wound dressing. Electrospinning has added a new dimension to polymeric materials, including alginate, which can be processed to their nanosize levels in order to afford unique nanostructured materials with fascinating properties. The resulting nanostructured materials often feature high porosity, stability, permeability, and a large surface-to-volume ratio. In the present review, recent trends on electrospun alginate nanofibers from over the past 10 years toward advanced applications are discussed. The application of electrospun alginate nanofibers in various fields such as bioremediation, scaffolds for skin tissue engineering, drug delivery, and sensors are also elucidated.

Morphology and Properties of Electrospun PCL and Its Composites for Medical Applications: A Mini Review

Polycaprolactone (PCL) is one of the most used synthetic polymers for medical applications due to its biocompatibility and slow biodegradation character. Combining the inherent properties of the PCL matrix with the characteristic of nanofibrous particles, result into promising materials that can be suitable for different applications, including the biomedical applications. The advantages of nanofibrous structures include large surface area, a small diameter of pores and a high porosity, which make them of great interest in different applications. Electrospinning, as technique, has been heavily used for the preparation of nano- and micro-sized fibers. This review discusses the different methods for the electrospinning of PCL and its composites for advanced applications. Furthermore, the steady state conditions as well as the effect of the electrospinning parameters on the resultant morphology of the electrospun fiber are also reported.

Characterization of different biodegradable scaffolds in tissue engineering

The aim of the present study was to compare the characteristics of acellular dermal matrix (ADM), small intestinal submucosa (SIS) and Bio‑Gide scaffolds with acellular vascular matrix (ACVM)‑0.25% human‑like collagen I (HLC‑I) scaffold in tissue engineering blood vessels. The ACVM‑0.25% HLC‑I scaffold was prepared and compared with ADM, SIS and Bio‑Gide scaffolds via hematoxylin and eosin (H&E) staining, Masson staining and scanning electron microscope (SEM) observations. Primary human gingival fibroblasts (HGFs) were cultured and identified. Then, the experiment was established via the seeding of HGFs on different scaffolds for 1, 4 and 7 days. The compatibility of four different scaffolds with HGFs was evaluated by H&E staining, SEM observation and Cell Counting Kit‑8 assay. Then, a series of experiments were conducted to evaluate water absorption capacities, mechanical abilities, the ultra‑microstructure and the cytotoxicity of the four scaffolds. The ACVM‑0.25% HLC‑I scaffold was revealed to exhibit the best cell proliferation and good cell architecture. ADM and Bio‑Gide scaffolds exhibited good mechanical stability but cell proliferation was reduced when compared with the ACVM‑0.25% HLC‑I scaffold. In addition, SIS scaffolds exhibited the worst cell proliferation. The ACVM‑0.25% HLC‑I scaffold exhibited the best water absorption, followed by the SIS and Bio‑Gide scaffolds, and then the ADM scaffold. In conclusion, the ACVM‑0.25% HLC‑I scaffold has good mechanical properties as a tissue engineering scaffold and the present results suggest that it has better biological characterization when compared with other scaffold types.

Gradient porous fibrous scaffolds: a novel approach to improving cell penetration in electrospun scaffolds

Electrospinning is an increasingly popular technique to generate 3D fibrous tissue scaffolds that mimic the submicron sized fibers of extracellular matrices. A major drawback of electrospun scaffolds is the small interfibrillar pore size, which normally prevents cellular penetration in between fibers. In this study, we introduced a novel process, based on electrospinning, to manufacture a unique gradient porous fibrous (GPF) scaffold from soy protein isolate (SPI). The pore sizes in the GPF scaffolds gradually increase from one side of the scaffold to the other, ranging from 7.8 ± 2.5 μm in the small pore side, 21.4 ± 10.3 μm in the mid layer to 58.0 ± 23.6 μm in the large pore side. The smallest pores of the GPF scaffolds appeared to be somewhat larger than those in conventionally electrospun SPI scaffolds (4.2 ± 1.3 μm). Hydrated GPF scaffolds exhibited J-shaped stress-strain curves, reminiscent of those for soft biological scaffolds. Attachment, spreading, and proliferation of human dermal fibroblasts (HDFB) were supported on both the small and the large pore sides of the GPF scaffolds. Cultured HDFB and murine RAW 264.7 macrophages penetrated significantly deeper (98.7 ± 24.2 μm and 53.3 ± 9.6 μm, respectively) into the larger pores than when seeded onto the small pore side of GPF scaffolds (22.8 ± 6.2 μm and 25.7 ± 7.3 μm) and control SPI scaffolds. (11.3 ± 3.8 μm and 15.3 ± 3.1 μm). This study introduces a novel fabrication technique, which, by convergence of several biofabrication technologies, produces scaffolds with enhanced cellular penetration.

Gene immobilization on alginate/polycaprolactone fibers through electrophoretic deposition to promote in situ transfection efficiency and biocompatibility

Alginate and polycaprolactone (PCL) were coelectrospun as composite nanofibers for in situ transfection, in which anionic alginate fibers were used to adsorb polyethyleneimine (PEI)/DNA polyplexes and biocompatible PCL fibers were applied to promote cell adhesion. To improve gene immobilization, direct-current electric field (DCEF) was applied to guide cationic polyplexes toward nanofibers on cathode. Fluorescent labeling experiments suggested that the applied DCEF not only accelerated but also increased the saturation levels of gene immobilization. Interestingly, these DCEF also increased the degradation of nanofibers. The water contact angle and Fourier-transform infrared spectrometry results indicated that the degraded component was mainly alginate. It suggested that the DCEF treatment may cause the electrophoresis of calcium ions to destabilize alginates fibers, and thus the degradation rates increased with the applied voltages. This alginate degradation increased the ratio of PCL in composite fibers, so the cell adhesion, viability, and proliferation were improved. Finally, these DCEF-treated fibers were used for substrate-mediated gene delivery. The transfection efficiency highly increased with DCEF when the voltages were lower than 1.5 V. This dynamic scaffold system not only provided a suitable microenvironment for cell ingrowth, but also improved gene immobilization and transfection, and thus promised its therapeutic effect for tissue regeneration.

The control of alginate degradation to dynamically manipulate scaffold composition for in situ transfection application

In this study, nanofibrous scaffolds were used for in situ transfection application. Polyethylenimine (PEI)/DNA complexes adsorbed to alginate nanofibers, so the more alginate fibers resulted in the higher transfection efficiency. However, alginate was not favorable for cell adhesion. Therefore, poly (ε‑caprolactone) (PCL) nanofibers were electrospun with alginate to improve biocompatibility. The in situ transfection results demonstrated that although the incorporated PCL fibers effectively improved cell morphology, the bioactivity and proliferation rates of surface cells were not significantly increased due to the high ratio of alginate fibers. However, the reduction of the alginate ratio may decrease transfection efficiency because the immobilization of nonviral vectors linearly depended on the density of alginate fibers. To maintain transfection efficiency and increase biocompatibility, the stability of alginate fibers were manipulated by adjusting the concentrations of calcium ions during crosslinking. These partially crosslinked alginate fibers were initially intact to allow nanoparticle adsorption for cell uptake, and then gradually degraded in days to create an appropriate environment for cell survival. This dynamic system successfully fulfilled the requirements of both gene delivery and biocompatibility. To our knowledge, this study may be the first one which dynamically regulates scaffold composition for substrate-mediated gene delivery.