Modification of cellulose foam paper for use as a high-quality biocide disinfectant filter for drinking water

The long-term effect of glutaraldehyde on the bacterial community in anaerobic ammonium oxidation reactor

A 160-day incubation was performed with two anammox reactors (GA and CK) to investigate the effect of glutaraldehyde. The results indicated that anammox bacteria were very sensitive when glutaraldehyde in GA reactor increased to 40 mg/L, the nitrogen removal efficiency sharply decreased to 11%, only one-quarter of CK. Glutaraldehyde changed spatial distribution of exopolysaccharides, caused anammox bacteria (Brocadia CK_gra75) to disassociate from granules (24.70% of the reads in CK but only 14.09% in GA granules). Metagenome analysis indicated glutaraldehyde led to the denitrifier community succession from strains without nir (nitrite reductase) and nor (nitric oxide reductases) genes to those with them, and the rapid growth of denitrifiers with NodT (an outer membrane factor)-related efflux pumps replacing those with another TolC -related ones. Meanwhile, Brocadia CK_gra75 lacks the NodT proteins. This study provides important insight into community adaptation and potential resistance mechanism in an active anammox community after exposure to disinfectant.

Existing Filtration Treatment on Drinking Water Process and Concerns Issues

Water is one of the main sources of life's survival. It is mandatory to have good-quality water, especially for drinking. Many types of available filtration treatment can produce high-quality drinking water. As a result, it is intriguing to determine which treatment is the best. This paper provides a review of available filtration technology specifically for drinking water treatment, including both conventional and advanced treatments, while focusing on membrane filtration treatment. This review covers the concerns that usually exist in membrane filtration treatment, namely membrane fouling. Here, the parameters that influence fouling are identified. This paper also discusses the different ways to handle fouling, either based on prevention, prediction, or control automation. According to the findings, the most common treatment for fouling was prevention. However, this treatment required the use of chemical agents, which will eventually affect human health. The prediction process was usually used to circumvent the process of fouling development. Based on our reviews up to now, there are a limited number of researchers who study membrane fouling control based on automation. Frequently, the treatment method and control strategy are determined individually.

A pulp foam with highly improved physical strength, fire-resistance and antibiosis by incorporation of chitosan and CPAM

Bio-inspired borate cross-linked pulp foam (PF) with high porosity and low density can be widely used in many fields. However, PF is flammable, and lack of mechanical strength and antibacterial activity. To solve these issues, an ultra-strong PF was prepared by incorporation of chitosan and cationic polyacrylamide (CPAM). Results showed that the obtained PF exhibited highly improved mechanical properties (the compressive strength (485 kPa at a strain of 50%) was over 6 times higher compared with the borate cross-linked PF without chitosan and CPAM, and it was even higher than most of the reported cellulose-based porous materials). Also, the prepared PF has good performance on fire-retardance (hard to light), thermal insulation, antibiosis and sound absorption, due to the synergistic actions of borate, chitosan and CPAM. Additionally, spent liquor in preparing PF could be fully recycled, and thus this sustainable approach has potential for large-scale production of high-performance PF.

Biocides as Biomedicines against Foodborne Pathogenic Bacteria

Biocides are currently considered the first line of defense against foodborne pathogens in hospitals or food processing facilities due to the versatility and efficiency of their chemical active ingredients. Understanding the biological mechanisms responsible for their increased efficiency, especially when used against foodborne pathogens on contaminated surfaces and materials, represents an essential first step in the implementation of efficient strategies for disinfection as choosing an unsuitable product can lead to antibiocide resistance or antibiotic–biocide cross-resistance. This review describes these biological mechanisms for the most common foodborne pathogens and focuses mainly on the antipathogen effect, highlighting the latest developments based on in vitro and in vivo studies. We focus on biocides with inhibitory effects against foodborne bacteria (e.g., Escherichia spp., Klebsiella spp., Staphylococcus spp., Listeria spp., Campylobacter spp.), aiming to understand their biological mechanisms of action by looking at the most recent scientific evidence in the field.

Potential of Gum Arabic Functionalized Iron Hydroxide Nanoparticles Embedded Cellulose Paper for Packaging of Paneer

Recently, the interest of scientists has turned towards eco-friendly metal nanoparticles due to their distinctive physicochemical properties that have been used in several biochemical and food applications, including drug and bioactive component delivery, sensing of food pathogenic bacteria, imaging techniques, and theranostics. Therefore, this study aimed to fabricate gum arabic stabilized iron hydroxide nanoparticles (IHNPs) using the co-precipitation process and to develop nanoparticles decorated antimicrobial cellulose paper. The agglomeration of IHNPs is a major concern, therefore, the varied concentration (0.25-2.0%) of gum arabic was used to functionalize and stabilize the nanoparticles, and based on UV-visible spectroscopy and particle size analysis, 1% gum arabic concentration was screened out. Scanning electron microscopy displayed polygonal disc shapes of IHNPs that had sides of approximately equal lengths. Energy dispersive spectroscopy was used to determine the purity of the IHNPs and results illustrated the elemental iron peak at 0.8 keV and 6.34 keV. For thermal stability, differential scanning calorimetry (DSC) was employed, and the glass transition temperature was observed at 138.50 °C with 138.31 °C onset and 147.14 °C endset temperature, respectively. Functionalized IHNPs showed a significantly (p < 0.05) higher zone of inhibition against S. aureus (29.63 mm) than that of E. coli and were found to be non-toxic to Caco-2 cells during cell viability assay. Time-kill kinetics showed that cellulose paper embedded with nanoparticles possessed excellent antibacterial activity against S. aureus. To explore the food application of developed cellulose paper, citric acid coagulated dairy product (Paneer), similar to cottage cheese was formulated, and it was evaluated for its microbial shelf life. The unwrapped sample showed higher microbial load during the fourth day of the storage. However, both wrapped samples were acceptable till the 10th of storage.

Development of cost effective ultra-lightweight cellulose-based sound absorbing material over silica sol/natural fiber blended substrate

An Ultra-lightweight cellulose-based foam material (ULW-CFM) reinforced with silicasol was prepared by foam forming technology. The sodium dodecylbenzene sulfonate (SDBS) was a suitable foaming agent, creating stable bubbles for ULW-CFM with silicasol. The modulus of elasticity of ULW-CFM modified by silicasol was enhanced from 14.8 kPa to 83.32 kPa, and the yield strength was improved from 1.6 kPa to 4.36 kPa, respectively. The FTIR analysis indicated that the silicasol was deposited inside the material by SiOSi bonds and might has dehydration condensation reaction with cellulose. The thermostability of this material was also enhanced by silicasol. The weight loss of ULW-CFM with silicasol was less pronounced (60.36 %) than the one without (81.12 %). Owing to three dimensionally dispersed fiber structure, ultralightweight, high porosity, the sound absorption coefficient of ULW-CFM with silicasol reached 0.65 above 5000 Hz. Results show that ULW-CFM modified by silicasol has a promising application as a degradable sound absorbing material for dealing with noise.

Strong ultralight foams based on nanocrystalline cellulose for high-performance insulation

Environmentally friendly, sustainable, and high-performance thermal insulators are in high demand. Petroleum-based insulator foams usually have high thermal conductivity and pose health hazards. Here, we report ultralight composite foams that are highly strong, elastic, and super-insulating. The foams are composed of nanocrystalline cellulose (NCC) (74 wt%), polyvinyl alcohol (7.5 wt%), and a crosslinking agent (18.5 wt%). The fabrication process is simple and uses only water. The composite foams exhibit an elastic strain of ˜13% at a modulus of 250 K Pa and a stress of 73 K Pa at 50% strain (100+ and 18 times, respectively, higher than those of pure NCC foam); both exceed the values of reported nanocellulose-based foams with no reinforcement. The foams exhibit a thermal conductivity of 0.027 Wm^-1 K^-1, which is superior to those of traditional insulating materials. The structural integrity is also preserved after burning. Our results show that NCC-based materials can be engineered towards high-performance insulation applications.

Ultralong Hydroxyapatite Nanowire-Based Filter Paper for High-Performance Water Purification

A new kind of environmentally friendly filter paper based on ultralong hydroxyapatite nanowires (HAPNWs) and cellulose fibers (CFs) with excellent filtration and adsorption properties has been developed for the application in high-performance water purification. The use of polyamidoamine-epichlorohydrin (PAE) resin increases the wet mechanical strength of the as-prepared HAPNW/CF filter paper. The addition of CFs enhances the mechanical strength of the HAPNW/CF filter paper. Owing to the porous structure and superhydrophilicity of the as-prepared HAPNW/CF filter paper, the pure water flux is as high as 287.28 L m^-2 h^-1 bar^-1 under cross-flow conditions, which is about 3200 times higher than that of the cellulose fiber paper with addition of PAE. More importantly, the as-prepared HAPNW/CF filter paper shows superior performance in the removal of TiO₂ nanoparticles (>98.61%) and bacteria (up to 100%) in water by the size exclusion and blocking effect. In addition, the HAPNW/CF filter paper also exhibits high adsorption capacities for methyl blue (273.97 mg g^-1) and Pb²⁺ ions (508.16 mg g^-1). The adsorption mechanism of the HAPNW/CF filter paper is investigated. The as-prepared environmentally friendly HAPNW/CF filter paper with both excellent filtration and adsorption properties has promising application in high-performance water purification to tackle the worldwide water scarcity problem.

Nano-based smart pesticide formulations: Emerging opportunities for agriculture

The incorporation of nanotechnology as a means for nanopesticides is in the early stage of development. The main idea behind this incorporation is to lower the indiscriminate use of conventional pesticides to be in line with safe environmental applications. Nanoencapsulated pesticides can provide controlled release kinetics, while efficiently enhancing permeability, stability, and solubility. Nanoencapsulation can enhance the pest-control efficiency over extended durations by preventing the premature degradation of active ingredients (AIs) under harsh environmental conditions. This review is thus organized to critically assess the significant role of nanotechnology for encapsulation of AIs for pesticides. The smart delivery of pesticides is essential to reduce the dosage of AIs with enhanced efficacy and to overcome pesticide loss (e.g., due to leaching and evaporation). The future trends of pesticide nanoformulations including nanomaterials as AIs and nanoemulsions of biopesticides are also explored. This review should thus offer a valuable guide for establishing regulatory frameworks related to field applications of these nano-based pesticides in the near future.

Enhanced antibacterial profile of nanoparticle impregnated cellulose foam filter paper for drinking water filtration

Filtration is a promising water treatment method to purify drinking water. To develop highly efficient drinking water filter paper, water-resistant cellulose foam paper with a high wet strength property was fabricated using diverse metal oxide (e.g., copper oxide (CuO), zinc oxide (ZnO), and silver oxide (Ag₂O)) nanoparticles. These nanoparticles were synthesized using the hydrothermal reaction method. Their morphological structures were studied using a field emission scanning electron microscope (FESEM). The presence of coated nanoparticles on the cellulose foam filter was verified by energy dispersive X-ray spectroscopy (EDX) methods. The antibacterial performance of different types of modified cellulose foam filters was studied against E. coli, P. aeruginosa, B. subtilis, and B. cereus strains using the zone of inhibition test. The antibacterial profile of the cellulose foam filter impregnated with Ag₂O nanoparticles, when tested against different types of bacteria, exhibited higher antibacterial activity than the cellulose foam filter impregnated with ZnO and CuO nanoparticles.