Synthesis of stimuli–responsive chitosan–based hydrogels by Diels–Alder cross–linking `click´ reaction as potential carriers for drug administration

Bioactive injectable mucoadhesive thermosensitive natural polymeric hydrogels for oral bone and periodontal regeneration

Periodontitis is an inflammation-related condition, caused by an infectious microbiome and host defense that causes damage to periodontium. The natural processes of the mouth, like saliva production and eating, significantly diminish therapeutic medication residency in the region of periodontal disease. Furthermore, the complexity and diversity of pathological mechanisms make successful periodontitis treatment challenging. As a result, developing enhanced local drug delivery technologies and logical therapy procedures provides the foundation for effective periodontitis treatment. Being biocompatible, biodegradable, and easily administered to the periodontal tissues, hydrogels have sparked substantial an intense curiosity in the discipline of periodontal therapy. The primary objective of hydrogel research has changed in recent years to intelligent thermosensitive hydrogels, that involve local adjustable sol-gel transformations and regulate medication release in reaction to temperature, we present a thorough introduction to the creation and efficient construction of new intelligent thermosensitive hydrogels for periodontal regeneration. We also address cutting-edge smart hydrogel treatment options based on periodontitis pathophysiology. Furthermore, the problems and prospective study objectives are reviewed, with a focus on establishing effective hydrogel delivery methods and prospective clinical applications.

Metal-Free Click-Chemistry: A Powerful Tool for Fabricating Hydrogels for Biomedical Applications

Increasing interest in the utilization of hydrogels in various areas of biomedical sciences ranging from biosensing and drug delivery to tissue engineering has necessitated the synthesis of these materials using efficient and benign chemical transformations. In this regard, the advent of "click" chemistry revolutionized the design of hydrogels and a range of efficient reactions was utilized to obtain hydrogels with increased control over their physicochemical properties. The ability to apply the "click" chemistry paradigm to both synthetic and natural polymers as hydrogel precursors further expanded the utility of this chemistry in network formation. In particular, the ability to integrate clickable handles at predetermined locations in polymeric components enables the formation of well-defined networks. Although, in the early years of "click" chemistry, the copper-catalyzed azide-alkyne cycloaddition was widely employed, recent years have focused on the use of metal-free "click" transformations, since residual metal impurities may interfere with or compromise the biological function of such materials. Furthermore, many of the non-metal-catalyzed "click" transformations enable the fabrication of injectable hydrogels, as well as the fabrication of microstructured gels using spatial and temporal control. This review article summarizes the recent advances in the fabrication of hydrogels using various metal-free "click" reactions and highlights the applications of thus obtained materials. One could envision that the use of these versatile metal-free "click" reactions would continue to revolutionize the design of functional hydrogels geared to address unmet needs in biomedical sciences.

Chitosan-based hydrogels: From preparation to applications, a review

Chitosan, derived from the deacetylation of chitin, is an abundant natural biopolymer on earth. Chitosan and its derivatives have become promising biological materials because of their unique molecular structure and excellent biological activities. The reactive functional groups of chitosan such as the amino and hydroxyl groups play a crucial role in facilitating the synthesis of three-dimensional hydrogel. Chitosan-based hydrogels have been widely used in medical, pharmaceutical, and environmental fields for years. Nowadays, chitosan-based hydrogels have been found in a wide range of applications in the food industry such as food sensors, dye adsorbents and nutrient carriers. In this review, recently developed methods for the preparation of chitosan-based hydrogels were given, and the biological activities of chitosan-based hydrogels were systematically introduced. Additionally, the recent progress in food sensors, packaging, dye adsorbents, and nutrient carriers was discussed. Finally, the challenges and prospects for the future development of chitosan-based hydrogels were discussed.

Synthesis and characterization of gellan gum-based hydrogels for drug delivery applications

In this study, gellan gum (Gel) derivatives were allowed to interact via aqueous Diels-Alder chemistry without the need for initiators, producing a crosslinked hydrogel network that exhibited good potential as a drug carrier using tramadol as a drug model. Hydrogel conjugation was achieved by the synthesis of a maleimide and furan-functionalized Gel, and the pre- and post-gelation chemical structure of the resulting hydrogel precursors was fully investigated. Potential uses of the developed hydrogel in the pharmaceutical industry were also evaluated by looking at its gelation duration, temperature, morphologies, swelling, biodegradation, and mechanical characteristics. The Gel-FM hydrogels were safe, showed good antimicrobial activity, and had a low storage modulus, which meant that they could be used in many biochemical fields. The encapsulation and release of tramadol from the hydrogel system in phosphate-buffered saline (PBS) at 37 °C were investigated under acidic and slightly alkaline conditions, replicating the stomach and intestinal tracts, respectively. The in-vitro release profile showed promising results for drug encapsulation, revealing that the drug could safely be well-encapsulated in acidic stomach environments and released more quickly in slightly alkaline intestinal environments. This implies that the hydrogels produced could work well as polymers for specifically delivering medication to the colon.

Fibrillar Hydrogel Based on Cellulose Nanocrystals Crosslinked via Diels-Alder Reaction: Preparation and pH-Sensitive Release of Benzocaine

A fibrillar hydrogel was obtained by covalent crosslinking via Diels-Alder reaction of two types of cellulose nanocrystals (CNCs) with furan and maleimide groups. Gelation has been studied at various ratios of components and temperatures in the range from 20 to 60 °C. It was shown that the rheological properties of the hydrogel can be optimized by varying the concentration and ratio of components. Due to the rigid structure of the CNCs, the hydrogel could be formed at a concentration of at least 5 wt%; however, it almost does not swell either in water with pH 5 or 7 or in the HBSS buffer. The introduction of aldehyde groups into the CNCs allows for the conjugation of physiologically active molecules containing primary amino groups due to the formation of imine bonds. Here, we used benzocaine as a model drug for conjugation with CNC hydrogel. The resulting drug-conjugated hydrogel demonstrated the stability of formulation at pH 7 and a pH-sensitive release of benzocaine due to the accelerated hydrolytic cleavage of the imine bond at pH < 7. The developed drug-conjugated hydrogel is promising as wound dressings for local anesthesia.

Green surface functionalization of chitosan with spent tea waste extract for the development of an efficient adsorbent for aspirin removal

This study investigates the feasibility of spent tea waste extract (STWE) as a green modifying agent for the modification of chitosan adsorbent towards aspirin removal. Response surface methodology based on Box-Behnken design was employed to find the optimal synthesis parameters (chitosan dosage, spent tea waste concentration, and impregnation time) for aspirin removal. The results revealed that the optimum conditions for preparing chitotea with 84.65% aspirin removal were 2.89 g of chitosan, 18.95 mg/mL of STWE, and 20.72 h of impregnation time. The surface chemistry and characteristics of chitosan were successfully altered and improved by STWE, as evidenced by FESEM, EDX, BET, and FTIR analysis. The adsorption data were best fitted to pseudo 2nd order, followed by chemisorption mechanisms. The maximum adsorption capacity of chitotea was 157.24 mg/g, as fitted by Langmuir, which is impressive for a green adsorbent with a simple synthesis method. Thermodynamic studies demonstrated the endothermic nature of aspirin adsorption onto chitotea.

Self-healing hydrogels for bone defect repair

Severe bone defects can be caused by various factors, such as tumor resection, severe trauma, and infection. However, bone regeneration capacity is limited up to a critical-size defect, and further intervention is required. Currently, the most common clinical method to repair bone defects is bone grafting, where autografts are the "gold standard." However, the disadvantages of autografts, including inflammation, secondary trauma and chronic disease, limit their application. Bone tissue engineering (BTE) is an attractive strategy for repairing bone defects and has been widely researched. In particular, hydrogels with a three-dimensional network can be used as scaffolds for BTE owing to their hydrophilicity, biocompatibility, and large porosity. Self-healing hydrogels respond rapidly, autonomously, and repeatedly to induced damage and can maintain their original properties (i.e., mechanical properties, fluidity, and biocompatibility) following self-healing. This review focuses on self-healing hydrogels and their applications in bone defect repair. Moreover, we discussed the recent progress in this research field. Despite the significant existing research achievements, there are still challenges that need to be addressed to promote clinical research of self-healing hydrogels in bone defect repair and increase the market penetration.

Novel PLCL nanofibrous/keratin hydrogel bilayer wound dressing for skin wound repair

In this study, a novel poly(L-lactate-caprolactone) copolymer (PLCL) nanofibrous/keratin hydrogel bilayer wound dressing loaded with fibroblast growth factor (FGF-2) was prepared by the low-pressure filtration-assisted method. The ability of the keratin hydrogel in the bilayer dressing to mimic the dermis and that of the nanofibrous PLCL to mimic the epidermis were discussed. Keratin hydrogel exhibited good porosity and maximum water absorption of 874.09%. Compared with that of the dressing prepared by the coating method, the interface of the bilayer dressing manufactured by the low-pressure filtration-assisted method (filtration time: 20 min) was tightly bonded, and its bilayer dressing interface could not be easily peeled off. The elastic modulus of hydrogel was about 44 kPa, which was similar to the elastic modulus of the dermis (2-80 kPa). Additionally, PLCL nanofibers had certain toughness and flexibility suitable for simulating the epidermal structures. In vitro studies showed that the bilayer dressing was biocompatible and biodegradable. In vivo studies indicated that PLCL/keratin-FGF-2 bilayer dressing could promote re-epithelialization, collagen deposition, skin appendages (hair follicles) regeneration, microangiogenesis construction, and adipose-derived stem cells (ADSCs) recruitment. The introduction of FGF-2 resulted in a better repair effect. The bilayer dressing also solved the problems of poor interface adhesion of hydrogel/electrospinning nanofibers. This paper also explored the preliminary role and mechanism of bilayer dressing in promoting skin healing, showing that its potential applications as a biomedical wound dressing in the field of skin tissue engineering.

Recent Advances in Hydrogels via Diels-Alder Crosslinking: Design and Applications

The Diels-Alder (DA) reaction is a promising tool for obtaining covalently crosslinked hydrogels due to its reaction bioorthogonality, the absence of by-products, and the application of mild conditions without a catalyst. The resulting hydrogels are in demand for use in various fields of materials science and biomedicine. While the dynamic nature of the cycloaddition of diene and dienophile has previously been used extensively for the fabrication of self-healing materials, it has only recently spread to the expansion of the functional properties of polymer gels for bioapplications. This review describes strategies and recent examples of obtaining hydrogels based on the DA reaction, demonstrating that the emerging functional properties go beyond self-healing. The types of classifications of hydrogels are listed, depending on the type of reaction and the nature of the components. Examples of obtaining hydrogels based on the normal and inverse electron-demand DA reaction, as well as the application of hydrogels for cell culture, drug delivery, injectable gels, and wound dressings, are considered. In conclusion, possible developmental directions are discussed, including the use of diene-dienophile pairs with a low temperature for the reversal of DA reaction, the modification of nanoparticles by diene and/or dienophile fragments, and new applications such as ink for 3D printing, sensing hydrogels, etc.

Ultrasound-Responsive Hydrogels for On-Demand Protein Release

The development of tunable, ultrasound-responsive hydrogels that can deliver protein payload on-demand when exposed to focused ultrasound is described in this study. Reversible Diels-Alder linkers, which undergo a retro reaction when stimulated with ultrasound, were used to cross-link chitosan hydrogels with entrapped FITC-BSA as a model protein therapeutic payload. Two Diels-Alder linkage compositions with large differences in the reverse reaction energy barriers were compared to explore the influence of linker composition on ultrasound response. Selected physicochemical properties of the hydrogel construct, its basic degradation kinetics, and its cytocompatibility were measured with respect to Diels-Alder linkage composition. Focused ultrasound initiated the retro Diels-Alder reaction, controlling the release of the entrapped payload while also allowing for real-time visualization of the ongoing process. Additionally, increasing the focused ultrasound amplitude and time correlated with an increased rate of protein release, indicating stimuli responsive control.

Thermo-sensitivity and erosion of chitosan crosslinked poly[N-isopropylacrylamide-co-(acrylic acid)-co-(methyl methacrylate)] hydrogels for application to the inferior fornix

Thermo-gels based on chitosan crosslinked poly(N-isopropylacrylamide) were developed as alternatives to conventional eye drops for the sustained release of ketotifen fumarate in the treatment of allergic conjunctivitis. The thermo-gelling properties of the base polymer were altered prior to crosslinking with chitosan by incorporation of the hydrophilic and hydrophobic comonomers acrylic acid and methyl methacrylate respectively. Varying amounts of chitosan were incorporated by ionic interaction to produce polyelectrolyte complexes or by carbodiimide chemistry to produce covalently crosslinked networks. The lower critical solution temperature of all the chitosan crosslinked thermo-gels produced was below the surface temperature of the eye. All the chitosan crosslinked thermo-gels were found to have greater than 80% equilibrium water contents following gelation. The method and amount of chitosan incorporation allowed for tailor-ability of material rheologic properties, with full degradation occurring over a one-to-four-day period, and tailorable rates of release of 40-60% of the loaded allergy medication ketotifen fumarate. The chitosan crosslinked thermo-gels were demonstrated to be nontoxic both in vitro and in vivo. It was demonstrated that the synthesized materials could be applied to the inferior fornix of eye, sustaining a multiple day release of ketotifen fumarate, as an alternative to conventional eyedrops. STATEMENT OF SIGNIFICANCE: Topical eyedrops are the main treatment modality for anterior ocular conditions. However, due to the natural clearance mechanisms of the eye, topical eyedrops are well established to be largely ineffective as a method of drug delivery. Herein, we investigate a method of altering thermo-gel properties of an n-isopropylacrylamide based polymer to enable the incorporation of greater amounts of chitosan by different methods of crosslinking. By controlling the synthesis parameters, final material properties can be tailored to impart ideal spreading, retention on the eye, and the rate of degradation and drug release over several days. This work also focuses on studying the rheological properties of the chitosan crosslinked thermo-gels which has not been investigated previously.

Designing End-of-life Recyclable Polymers via Diels-Alder Chemistry: A Review on the Kinetics of Reversible Reactions

The purpose of this review is to critically assess the kinetic behaviour of the furan/maleimide Diels-Alder click reaction. The popularity of this reaction is evident and still continues to grow, which is likely attributed to its reversibility at temperatures above 100°C, and due to its bio-based "roots" in terms of raw materials. This chemistry has been used to form thermo-reversible crosslinks in polymer networks, and thus allows the polymer field to design strong, but also end-of-life recyclable thermosets and rubbers. In this context, the rate at which the forward reaction (Diels-Alder for crosslinking) and its reverse (retro Diels-Alder for de-crosslinking) proceed as function of temperature is of crucial importance in assessing the feasibility of the design in real-life products. Differences in kinetics based from various studies are not well understood, but are potentially caused by chemical side groups, mass transfer limitations, and on the analysis methods being employed. In this work we attempt to place all the relevant studies in perspective with respect to each other, and thereby offer a general guide on how to assess their recycling kinetics. This review sheds light on the kinetics on the furan/maleimide Diels-Alder reaction. This popular reaction opens up a path to develop end-of-life recyclable polymer networks with self-healing properties. The factors affecting reaction kinetics are discussed, and the importance of accurate reaction kinetics in the context of polymer reprocessing is highlighted. This article is protected by copyright. All rights reserved.

Click Chemistry Hydrogels for Extrusion Bioprinting: Progress, Challenges, and Opportunities

The emergence of 3D bioprinting has allowed a variety of hydrogel-based "bioinks" to be printed in the presence of cells to create precisely defined cell-loaded 3D scaffolds in a single step for advancing tissue engineering and/or regenerative medicine. While existing bioinks based primarily on ionic cross-linking, photo-cross-linking, or thermogelation have significantly advanced the field, they offer technical limitations in terms of the mechanics, degradation rates, and the cell viabilities achievable with the printed scaffolds, particularly in terms of aiming to match the wide range of mechanics and cellular microenvironments. Click chemistry offers an appealing solution to this challenge given that proper selection of the chemistry can enable precise tuning of both the gelation rate and the degradation rate, both key to successful tissue regeneration; simultaneously, the often bio-orthogonal nature of click chemistry is beneficial to maintain high cell viabilities within the scaffolds. However, to date, relatively few examples of 3D-printed click chemistry hydrogels have been reported, mostly due to the technical challenges of controlling mixing during the printing process to generate high-fidelity prints without clogging the printer. This review aims to showcase existing cross-linking modalities, characterize the advantages and disadvantages of different click chemistries reported, highlight current examples of click chemistry hydrogel bioinks, and discuss the design of mixing strategies to enable effective 3D extrusion bioprinting of click hydrogels.

A review on the features, performance and potential applications of hydrogel-based wearable strain/pressure sensors

Over the past few years, development of wearable devices has gained increasing momentum. Notably, the demand for stretchable strain sensors has significantly increased due to many potential and emerging applications such as human motion monitoring, prosthetics, robotic systems, and touch panels. Recently, hydrogels have been developed to overcome the drawbacks of the elastomer-based wearable strain sensors, caused by insufficient biocompatibility, brittle mechanical properties, complicated fabrication process, as the hydrogels can provide a combination of various exciting properties such as intrinsic electrical conductivity, suitable mechanical properties, and biocompatibility. There are numerous research works reported in the literature which consider various aspects as preparation approaches, design strategies, properties control, and applications of hydrogel-based strain sensors. This article aims to present a review on this exciting topic with a new insight on the hydrogel-based wearable strain sensors in terms of their features, strain sensory performance, and prospective applications. In this respect, we first briefly review recent advances related to designing the materials and the methods for promoting hydrogels' intrinsic features. Then, strain (both tensile and pressure) sensing performance of prepared hydrogels is critically studied, and alternative approaches for their high-performance sensing are proposed. Subsequently, this review provides several promising applications of hydrogel-based strain sensors, including bioapplications and human-machine interface devices. Finally, challenges and future outlooks of conductive and stretchable hydrogels employed in the wearable strain sensors are discussed.

Click-functionalized hydrogel design for mechanobiology investigations

The advancement of click-functionalized hydrogels in recent years has coincided with rapid growth in the fields of mechanobiology, tissue engineering, and regenerative medicine. Click chemistries represent a group of reactions that possess high reactivity and specificity, are cytocompatible, and generally proceed under physiologic conditions. Most notably, the high level of tunability afforded by these reactions enables the design of user-controlled and tissue-mimicking hydrogels in which the influence of important physical and biochemical cues on normal and aberrant cellular behaviors can be independently assessed. Several critical tissue properties, including stiffness, viscoelasticity, and biomolecule presentation, are known to regulate cell mechanobiology in the context of development, wound repair, and disease. However, many questions still remain about how the individual and combined effects of these instructive properties regulate the cellular and molecular mechanisms governing physiologic and pathologic processes. In this review, we discuss several click chemistries that have been adopted to design dynamic and instructive hydrogels for mechanobiology investigations. We also chart a path forward for how click hydrogels can help reveal important insights about complex tissue microenvironments.

One pot synthesis of new cross-linked chitosan-Schiff' base: Characterization, and anti-proliferative activities

Four novel chitosan hydrogels were successfully synthesized through the cross-linking reaction of chitosan with different concentrations of ethyl 5-(3,5-dihydroxy-1,4-dioxan-2-yl)-2-methylfuran-3-carboxylate. Their structures were confirmed by Fourier transform infrared spectroscopy (FT-IR), ¹³C Cross polarization magic angle spinning nuclear magnetic resonance spectroscopy (CP/MAS ¹³C NMR), ultraviolet-visible spectroscopy, thermogravimetric analysis (TGA, DTA), and X-ray diffraction (XRD). Cytotoxicity on hepatocellular carcinoma (HepG-2) cell line and a normal African green monkey kidney (Vero) cell line were studied using the MTT assay. The resultant hydrogels showed a good inhibitory effect comparing to the un-modified parent; the hydrogels with the lowest degree cross-linking (0.125 and 0.25 mol cross-linker per one chitosan residue) showed potent anticancer activity in the HepG2 cells with IC₅₀ of 57.9 and 80.9 μg/ml, respectively. These results show that the newly synthesized cross-linked chitosan derivatives demonstrated more selectivity to the HepG2 than the Vero cells, indicating its potential for Investigation in the cure of hepatocellular carcinoma.

Covalently Crosslinked Hydrogels via Step-Growth Reactions: Crosslinking Chemistries, Polymers, and Clinical Impact

Hydrogels are an important class of biomaterials with the unique property of high-water content in a crosslinked polymer network. In particular, chemically crosslinked hydrogels have made a great clinical impact in past years because of their desirable mechanical properties and tunability of structural and chemical properties. Various polymers and step-growth crosslinking chemistries are harnessed for fabricating such covalently crosslinked hydrogels for translational research. However, selecting appropriate crosslinking chemistries and polymers for the intended clinical application is time-consuming and challenging. It requires the integration of polymer chemistry knowledge with thoughtful crosslinking reaction design. This task becomes even more challenging when other factors such as the biological mechanisms of the pathology, practical administration routes, and regulatory requirements add additional constraints. In this review, key features of crosslinking chemistries and polymers commonly used for preparing translatable hydrogels are outlined and their performance in biological systems is summarized. The examples of effective polymer/crosslinking chemistry combinations that have yielded clinically approved hydrogel products are specifically highlighted. These hydrogel design parameters in the context of the regulatory process and clinical translation barriers, providing a guideline for the rational selection of polymer/crosslinking chemistry combinations to construct hydrogels with high translational potential are further considered.

Chitosan modifications for adsorption of pollutants - A review

In recent times, research interest into the development of biodegradable, cost-effective and environmental friendly adsorbents with favourable properties for adsorption of pollutants is a challenge. Modification of chitosan via different physical and chemical methods have gained attention as a promising approach for removing organic (such as dyes and pharmaceuticals) and inorganic (such as metal/metal ions) pollutants from aqueous medium. In this regard, researchers have reported grafting and cross-linking approach among others as a potentially useful method for chitosan's modification for improved adsorption efficiency with respect to pollutant uptake. This article reviews the trend in chitosan modification, with regards to the summary of some recently published works on modification of chitosan and their adsorption application in pollutants (metal ion, dyes and pharmaceuticals) removal from aqueous medium. The review uniquely highlights some common cross-linkers and grafting procedures for chitosan modification, their influence on structure and adsorption capacity of modified-chitosan with respect to pollutants removal. Findings revealed that the performance of modified chitosan for adsorption of pollutants depends largely on the modification method adopted, materials used for the modification and adsorption experimental conditions. Cross-linking is commonly utilized for improving the chemical and mechanical stabilities of chitosan but usually decreases adsorption capacity of chitosan/modified-chitosan for adsorption of pollutants. However, literature survey revealed that adsorption capacity of cross-linked chitosan based materials have been enhanced in recently published works either by grafting, incorporation of solid adsorbents (e.g metals, clays and activated carbon) or combination of both prior to cross-linking.

Click chemistry-based biopolymeric hydrogels for regenerative medicine

Click chemistry is not a single specific reaction, but describes ways of generating products which emulate examples in nature. Click reactions occur in one pot, are not disturbed by water, generate minimal and inoffensive byproducts, and are characterized by a high thermodynamic driving force, driving the reaction quickly and irreversibly towards a high yield of a single reaction product. As a result, over the past 15 years it has become a very useful bio-orthogonal method for the preparation of chemical cross-linked biopolymer-based hydrogel, in the presence of e.g. growth factors and live cells, or in-vivo. Biopolymers are renewable and non-toxic, providing a myriad of potential backbone toolboxes for hydrogel design. The goal of this review is to summarize recent advances in the development of click chemistry-based biopolymeric hydrogels, and their applications in regenerative medicine. In particular, various click chemistry approaches, including copper-catalyzed azide-alkyne cycloaddition reactions, copper-free click reactions (e.g. the Diels-Alder reactions, the strain-promoted azide-alkyne cycloaddition reactions, the radical mediated thiol-ene reactions, and the oxime-forming reactions), and pseudo-click reactions (e.g. the thiol-Michael addition reactions and the Schiff base reactions) are highlighted in the first section. In addition, numerous biopolymers, including proteins (e.g. collagen, gelatin, silk, and mucin), polysaccharides (e.g. hyaluronic acid, alginate, dextran, and chitosan) and polynucleotides (e.g. deoxyribonucleic acid), are discussed. Finally, we discuss biopolymeric hydrogels, cross-linked by click chemistry, intended for the regeneration of skin, bone, spinal cord, cartilage, and cornea. This article provides new insights for readers in terms of the design of regenerative medicine, and the use of biopolymeric hydrogels based on click chemistry reactions.

Norbornene-Functionalized Chitosan Hydrogels and Microgels via Unprecedented Photoinitiated Self-Assembly for Potential Biomedical Applications

Access to biocompatible self-assembled gels and microgels is of great interests for a variety of biological applications from tissue engineering to drug delivery. Here, the facile synthesis of supramolecular hydrogels of norbornene (nb)-functionalized chitosan (CS-nb) via UV-triggered self-assembly in the presence of Irgacure 2959 (IRG) is reported. The in vitro stable hydrogels are injectable and showed pH-responsive swelling behavior, while their structure and mechanical properties could be tuned by tailoring the stereochemistry of the norbornene derivative (e.g., endo- or -exo). Interestingly, unlike other nb-type hydrogels, the gels possess nanopores within their structure, which might lead to potential drug delivery applications. A gelation mechanism was proposed based on hydrophobic interactions following the combination of IRG on norbornene, as supported by ¹H NMR. This self-assembly mechanism was used to access microgels of size 100-150 nm, which could be further functionalized and showed no significant toxicity to human dermofibroblast cells.

Functional Chitosan-based Materials for Biological Applications

Background:

Bio-based materials, as the plentiful and renewable resources for natural constituents which are essential for biomedical and pharmaceutical applications, have not been exploited adequately yet. Chitosan is a naturally occurring polysaccharide obtained from chitin, which has recently attracted widespread attention owing to its excellent activity. This review shows the methods of extraction and modification of chitosan and provides recent progress of synthesis and use of chitosan-based materials in biological applications.

Methods:

By consulting the research literature of the last decade, the recent progresses of functional chitosan-based materials for biological applications were summarized and divided into the methods of extraction chitosan, the chemical modification of chitosan, chitosan-based materials for biological applications were described and discussed.

Results:

Chemical modification of chitosan broadens its applications, leading to developing numerous forms of chitosan-based materials with excellent properties. The excellent bioactivity of chitosan-based material enables it serves potential applications in biomedical fields.

Conclusion:

Chitosan-based materials not only exhibit the excellent activities of chitosan but also show other appealing performance of combined materials, even give the good synergistic properties of chitosan and its composite materials. Further studies are needed to define the ideal physicochemical properties of chitosan for each type of biomedical applications. The development of various functional chitosan-based materials for biological applications will be an important field of research, and this kind of material has important commercial value.

Decoupled pH- and Thermo-Responsive Injectable Chitosan/PNIPAM Hydrogel via Thiol-Ene Click Chemistry for Potential Applications in Tissue Engineering

Stimuli-responsive chitosan (CS) hydrogels exhibit great potential for drug delivery and tissue engineering; however, the structure of these stimuli-responsive CS hydrogels, such as dual pH- and thermo-responsive hydrogels, is difficult to control or needs additional crosslinking agents. Here, a new dual pH- and thermo-responsive hydrogel system is developed by combining pH-responsive C₆ -OH allyl-modified CS (OAL-CS) with thermo-responsive poly(N-isopropylacrylamide) (PNIPAM). The thiol groups in PNIPAM and the allyl groups in OAL-CS can rapidly form crosslinking hydrogel network by "thiol-ene" click chemistry under UV irradiation. As expected, the swelling ratio of the OAL-CS/PNIPAM hydrogel can be controlled by changing pH and temperature. Moreover, the hydrogel displays non-cytotoxic nature toward human bone marrow mesenchymal stem cells, and the histological analyses reveal the subcutaneous tissue with no signs of inflammation after 5 days of injection in vivo. The results indicate that the new OAL-CS/PNIPAM hydrogel has potential to serve as a smart injectable platform for application in drug delivery and tissue engineering.

Renewable Responsive Systems Based on Original Click and Polyurethane Cross-Linked Architectures with Advanced Properties

A new chemical architecture from oleic acid, consisting of a diol structure containing pendant furan rings, denoted the furan oligomer (FO) was synthesized and fully characterized. The FO was integrated into a linear rapeseed-based polyurethane (PU) backbone and cross-linked through a Diels-Alder (DA) reaction by using pendant furan rings and a short polypropylene oxide-based bismaleimide. This is the first time that a thermoreversible PU network based on vegetable oil has been reported. The effects of varying proportions of FO in linear and cross-linked systems, by DA, were studied. These materials were analyzed by classic characterization techniques. The stability and recyclability of the cross-linked materials were shown by successive reprocessing cycles and reanalyzing the mechanical properties. Self-healing properties were macroscopically exhibited and investigated by tensile tests on healed materials. The resulting cross-linked materials present a large range of properties, such as tunable mechanical and thermoresponsive behavior, good thermal recyclability, and self-healing abilities.

Light-driven assembly of biocompatible fluorescent chitosan hydrogels with self-healing ability

Nitrile imine-mediated tetrazole-ene cycloaddition (NITEC) was successfully used to cross-link complementary tetrazole and maleimide chitosan derivatives into hydrogel networks using irradiation.

The role of cellulose nanocrystals in biocompatible starch-based clicked nanocomposite hydrogels

Starch-based nanocomposite hydrogels were successfully prepared by the Diels-Alder click cross-linking reaction between furan-functionalized starch derivative and a water-soluble tetrafunctional maleimide compound, adding cellulose nanocrystals (CNC) as nanoreinforcement. The effect of increasing the CNC content on rheological and swelling properties as well as on the morphology of the hydrogels was analyzed. Besides, in order to evaluate the applicability of the as-prepared hydrogels as delivery systems, drug release measurements and in vitro cytotoxicity assays were also performed. It was found that the prepared nanocomposite hydrogels presented higher stiffness as the CNC content increased. The incorporation of the nanocrystals modified the internal porous microstructure of the hydrogels, affecting consequently both the swelling capacity and the drug-delivery kinetics. Moreover, the prepared nanocomposite hydrogels showed non-toxic behavior, demonstrating their potential applicability in the biomedical field, especially as sustained drug delivery systems.

An Environmentally Sensitive Silk Fibroin/Chitosan Hydrogel and Its Drug Release Behaviors

To fabricate environmentally sensitive hydrogels with better biocompatibility, natural materials such as protein and polysaccharide have been widely used. Environmentally sensitive hydrogels can be used as a drug carrier for sustained drug release due to its stimulus responsive performance. The relationship between the internal structure of hydrogels and their drug delivery behaviors remains indeterminate. In this study, environmentally sensitive hydrogels fabricated by blending silk fibroin/chitosan with different mass ratios were successfully prepared using 1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide (EDC)/N-Hydroxysuccinimide (NHS) cross-linking agent. Scanning-electron microscopy (SEM) images showed the microcosmic surface of the gel had a 3-D network-like and interconnected pore structure. The N2 adsorption-desorption method disclosed the existence of macroporous and mesoporous structures in the internal structure of hydrogels. Data of compression tests showed its good mechanical performance. The swelling performance of hydrogels exhibited stimuli responsiveness at different pH and ion concentration. With the increase of pH and ion concentration, the swelling ratios of hydrogels (silk fibroin (SF)/ chitosan (CS) = 8/2 and 7/3) decreased. Methylene blue (MB) was loaded into the hydrogels to confirm the potential of sustained drug release and pH-responsive behavior. Therefore, due to the porous structure, stable mechanical strength, stimuli responsive swelling performance, and drug release behaviors, the SF/CS composite hydrogels have potential applications in controlled drug release.

Ionically Crosslinked Chitosan Membranes Used as Drug Carriers for Cancer Therapy Application

The aim of this paper was to prepare, by the freeze-drying method, ionically crosslinked chitosan membranes with different contents of pentasodium tripolyphosphate (TPP) and loaded with 1,4-naphthoquinone (NQ14) drug, in order to evaluate how the physical crosslinking affects NQ14 release from chitosan membranes for cancer therapy application. The membranes were characterized by Fourier transform infrared spectroscopy (FTIR), wide-angle X-ray diffraction (WAXD), scanning electron microscopy (SEM), swelling degree, and through in vitro drug release and cytotoxicity studies. According to the results, the molecular structure, porosity and hydrophilicity of the chitosan membranes were affected by TPP concentration and, consequently, the NQ14 drug release behavior from the membranes was also affected. The release of NQ14 from crosslinked chitosan membranes decreased when the cross-linker TPP quantity increased. Thus, depending on the TPP amount, the crosslinked chitosan membranes would be a potential delivery system to control the release of NQ14 for cancer therapy application. Lastly, the inhibitory potential of chitosan membranes ionically crosslinked with TPP and loaded with NQ14 against the B16F10 melanoma cell line was confirmed through in vitro cytotoxicity studies assessed via MTT assay. The anti-proliferative effect of prepared membranes was directly related to the amount of cross-linker and among all membranes prepared, such that one crosslinked with 0.3% of TPP may become a potential delivery system for releasing NQ14 drug for cancer therapy.

Rational Design of Self-Healing Tough Hydrogels: A Mini Review

Hydrogels are three-dimensional cross-linked polymer networks which can absorb and retain large amount of water. As representative soft materials with tunable chemical, physical and biological properties, hydrogels with different functions have been developed and utilized in a broad range of applications, from tissue engineering to soft robotics. However, conventional hydrogels usually suffer from weak mechanical properties and they are easily deformed or damaged when they are subjected to mechanical forces. The accumulation of the damage may lead to the permanent structural change and the loss of the functional properties of the hydrogels. Therefore, it is important to develop mechanically robust hydrogels with autonomous self-healing property in order to extend their lifespan for various applications. In this mini review, we focus on the discussion about the appropriate molecular design of the hydrogel network for achieving self-healing and excellent mechanical properties, respectively as well as the corresponding self-healing and toughening mechanisms. We conclude with perspectives on the remaining challenges in the field as well as the recommendations for future development.