Isothermal titration calorimetry to study the influence of citrus pectin degree and pattern of methylesterification on Zn2+ interaction

Strong gelation capacity of a pectin-like polysaccharide in the presence of K+ ion

In the present study, a pectin-like apple polysaccharide (AP) obtained by metal precipitation technique was demonstrated to show strong gelling capacity in the presence of K+ ion upon cooling. Increasing amount of K+ addition monotonically promoted the gelation of AP, as characterized by the increased gelation temperature (Tgel), gel melting temperature (Tmelt) and the gel strength. Compared with K+ ion, Na+ was unable to induce AP gelation even at high ionic concentrations, but other monovalent cations (Rb+, Cs+) can induce the gelation as in the case of K+ addition. At room temperature, the minimum cationic concentration as required to induce AP gelation followed the order of K+ ≈ Cr+ (8 mM) > Rb+ (3.5 mM), indicating that cationic radius (Na+ < K+ < Rb+ < Cs+) played a dominant role in inducing AP gelation, but other factors may also be involved. Finally, the gelation behavior of AP in the presence of K+ was explained as the suppressed intermolecular electrostatic repulsion between AP chains due to the strong electrostatic shielding effect of K+, which led to the formation of a gel network mediated by intermolecular hydrogen bonding. This reported gelation property may allow AP to find application as a new gelling polysaccharide.

Glycolipids improve the stability of liposomes: The perspective of bilayer membrane structure

The storage and thermal stability of liposomes, which are amphiphilic carriers, cause very large challenges. However, glycolipid modification may be a potential method to improve the stability of liposomes. In this study, the mechanism by which tilapia head glycolipids improve the stability of liposomes was studied. The head groups of glycolipids and liposomes have a strong interaction (K_a = 633.650 M^-1), mainly due to hydrogen bonds, which promote the formation of microstructure domains between glycolipids and liposomes. In addition, glycolipids caused the bilayer structure of liposomes to rearrange, resulting in an increase in the phase transition temperature, tight arrangement of membrane molecules, and increase in membrane thickness (from 2.4 nm to 3.5 nm). Novelty, the formation of microstructure domains helped prevent the liposomes membrane structure from being disrupted during storage and heat. Therefore, glycolipid modification improved the stability of liposomes. This study can provide new insights into the development of high-stability liposomes.

Physicochemical properties and Pb2+ adsorption capacity of freeze-dried hawthorn pectin fractions by gradient ethanol precipitation

Three fractions of FHP20, FHP40 and FHP60 were obtained from freeze-dried hawthorn pectin by gradient ethanol precipitation (20-60 %), and their physicochemical properties and adsorption performance on Pb²⁺ were investigated. It was found that the content of galacturonic acid (GalA) and esterification of FHP fractions gradually reduced with the increase of ethanol concentration. FHP60 had the lowest molecular weight (60.69 × 10³ Da), and the composition and proportion of monosaccharides were significantly different. The experimental results of Pb²⁺ adsorption showed that the adsorption process fitted well with the Langmuir monolayer adsorption and the pseudo-second-order models. Our findings suggested that pectin fractions with good homogeneity of molecular weight and chemical construction can be obtained by gradient ethanol precipitation, and hawthorn pectin could be developed as a potential adsorbent for Pb²⁺ removal.

Delivery system for grape seed extract based on biodegradable pectin-Zn-alginate gel particles

Pectin-Zn-alginate gel particles from callus culture pectin with increased linearity and decreased rhamnogalacturonan I branching and degree of methylesterification had a higher gel strength and encapsulation capacity. An increase of the alginate concentration led to an increase in the particle gel strength. The grape seed extract (GSE) loaded and empty particles swelled slightly in the simulated gastric fluid (SGF) and gradually in the intestinal (SIF) fluid. The swelling degrees of the GSE-loaded and empty particles in the simulated colonic fluids (SCF) were decreased in the range SCF-7.0 (pH 7.0 + pectinase) > SCF-5.3 (pH 5.3 + pectinase) > SCF-2.3 (pH 2.3 + pectinase). The FTIR spectra indicated that GSE was embedded in the composite particles. Negligible leakage of GSE in SGF was shown. The increase in GSE release in SIF was due to the decrease in particle gel strength and increased swelling degree. The GSE release in fluids simulating the colon inflammation (SCF-2.3 and SCF-5.3) was similar, and it was lower than that in the SCF-7.0 simulating a healthy colon due to the increased gel strength. The percentage release of GSE increased slightly after exposure to different pH. Pectin-Zn-alginate hydrogel systems may be promising candidates for colon-targeted GSE delivery systems.

Effects of cell wall polysaccharides on the bioaccessibility of carotenoids, polyphenols, and minerals: an overview

Carotenoids, polyphenols, and minerals (CPMs) are representative bioactive compounds and micronutrients in plant-based foods, showing many potentially positive bioactivities. Bioaccessibility is a prerequisite for bioactivities of CPMs. Cell wall polysaccharides (CWPs) are major structural components of plant cell wall, and they have been proven to affect the bioaccessibility of CPMs in different ways. This review summarizes recent literatures about the effects of CWPs on the bioaccessibility of CPMs and discusses the potential mechanisms. Based on the current findings, CWPs can inhibit the bioaccessibility of CPMs in gastrointestinal tract. The effects of CWPs on the bioaccessibility of polyphenols and minerals mainly attributes to bind between them, while CWPs affect the bioaccessibility of carotenoids by changing the digestive environment. Further, this review overviews the factors (environmental conditions, CWPs properties and CPMs characteristics) affecting the interactions between CWPs and CWPs. This review may help to better design healthy and nutritious foods precisely.

The role of polysaccharides functional groups in cadmium binding in root cell wall of a cadmium-safe rice line

Exploring the mechanism of cadmium (Cd) accumulation in Cd-safe rice lines is beneficial for ensuring rice safety. D62B, a Cd-safe rice line, accumulates less than 0.2 mg Cd kg^-1 in the brown rice due to strong capacity of Cd retention in the roots, and the root cell wall (RCW) polysaccharides play important roles. However, specific underlying mechanism of Cd binding on the polysaccharides is little known. In this study, the role of polysaccharides, especially pectin and hemicellulose 1 (HC1), in RCW of D62B was investigated by adsorption experiments and Fourier Transform Infrared Spectroscopy (FTIR) analysis compared with a common rice line (Luhui17). Cadmium was adsorbed on RCW of two rice lines by a multilayer and inhomogeneous chemisorption way with the force of ion transfer or exchange. Cadmium was adsorbed on RCW rapidly at first stage with the limit of internal and external diffusion, and gradually reached saturation. With the removal of pectin, the Cd adsorption rate, maximum Cd adsorption amount and the shift degree of carboxyl groups in the RCW of D62B sharply decreased, which showed advantages compared with Luhui17. Sequential removal of HC1 further decreased the maximum Cd adsorption amount and the shift degree of hydroxyl groups. The results showed that more available functional groups, especially carboxyl groups in pectin and hydroxyl groups in HC1, contributed to Cd immobilization within the RCW of Cd-safe rice line, thus limiting Cd translocation to the shoot and reducing Cd accumulation in the brown rice.

Grape pectic polysaccharides stabilization of anthocyanins red colour: Mechanistic insights

Grape pectic polysaccharides-malvidin-3-O- β -d-glucoside binding was studied, aiming to unveil the impact of structural diversity of polysaccharides on anthocyanins-polysaccharides interactions. Polysaccharides were extracted with solutions of imidazole (ISP) and carbonate at 4 °C (CSP-4 °C) and room temperature (CSP-RT) and also recovered from the dialysis supernatant of the remaining cellulosic residue after the aqueous NAOH extraction of hemicellulosic polysaccharides (Sn-CR). Polysaccharides richer in homogalacturonan domains, like those present in the CSP-4 °C fraction had approximately 50-fold higher binding affinity to malvidin-3-O- β-d-glucoside, than polysaccharides with side chains (as ISP and CSP-RT extractable polysaccharides). CSP-4 °C polysaccharides showed a positive effect on malvidin-3-O- β-d-glucoside colour fading. Hydration equilibrium constant of malvidin-3-O- β-d-glucoside in the presence of CSP-4 °C polysaccharides was higher, showing the preferential stabilization of the flavylium cation. The results showed that anthocyanins colour stabilization can be promoted by pectic polysaccharide structures such as those extracted by cold carbonate.

Impact Assessment of heavy metal cations to the characteristics of photosynthetic phycocyanin

This work has assessed the impact of typical heavy metal cations on C-phycocyanin in vitro and in silico. At low concentrations (<2×10^-6 mol/L), the influence of Pb²⁺ is the highest on the light absorption of C-phycocyanin trimer. At higher concentrations, however, a new order of influence on the light absorption has been observed with Cd²⁺ < Cu²⁺ < Pb²⁺ < Zn²⁺. The fluorescence polarization has changed from the order of Cd²⁺ < Pb²⁺≈Cu²⁺ < Zn²⁺ to Cd²⁺ < Cu²⁺ < Pb²⁺ < Zn²⁺, when the metal concentrations reaches 2×10^-6 mol/L. The mechanisms for these findings have been studied using FTIR, hydrophobic probe, isothermal titration calorimetry and molecular docking for the analysis of structure disorder of C-phycocyanin. It has been suggested that the secondary structure of C-phycocyanin affects more to the light absorbance while the fluorescence characteristics relies more on the tertiary structure. The interaction between Pb²⁺ and C-phycocyanin is both enthalpically and entropically favoured, whereas the interactions for Cd²⁺, Cu²⁺ and Zn²⁺ are entropically driven. The ion-molecular docking suggests that the structure disorder of C-phycocyanin relies on the molecular interactions with metal ions. The in silico study also showed that the binding cites of Zn²⁺ are closer to chromophores.

Thermodynamic Study of Ion-Driven Aggregation of Cellulose Nanocrystals

The thermodynamics of interactions between cations of the second group of the periodic table and differently negatively charged cellulose nanocrystals was investigated using isothermal titration calorimetry (ITC). The interaction of cations with the negatively charged CNCs was found to be endothermic and driven by an increase in entropy upon adsorption of the ions, due to an increase in degrees of freedom gained by the surface bound water upon ion adsorption. The effect was pH-dependent, showing an increase in enthalpy for cellulose suspensions at near-neutral pH (6.5) when compared to acidic pH (2). Sulfated cellulose nanoparticles were found to readily interact with divalent ions at both pH levels. The adsorption on carboxylate nanocrystals was found to be pH dependent, showing that the carboxylic group needs to be in the deprotonated form to interact with divalent ions. For the combined system (sulfate and carboxylate present at the same time), at neutral pH, the adsorption enthalpy was higher than the value obtained from cellulose nanocrystals containing a single functional group, while the association constant was higher due to an increased favorable entropic contribution. The higher entropic contribution indicates a more restricted surface-bound water layer when multiple functionalities are present. The stoichiometric number n was nearly constant for all systems, showing that the adsorption depends almost completely on the ion valency and on the amount of ionic groups on the CNC surface, independent of the type of functional group on the CNC surface as long as it is deprotonated. In addition, we showed that the reduction in Gibbs free energy drives the ionotropic gelation of nanocellulose suspensions, and we show that ITC is able to detect gel formation at the same time as determining the critical association concentration.

Influence of Pectin Structural Properties on Interactions with Divalent Cations and Its Associated Functionalities

Pectin is an anionic cell wall polysaccharide which is known to interact with divalent cations via its nonmethylesterified galacturonic acid units. Due to its cation-binding capacity, extracted pectin is frequently used for several purposes, such as a gelling agent in food products or as a biosorbent to remove toxic metals from waste water. Pectin can, however, possess a large variability in molecular structure, which influences its cation-binding capacity. Besides the pectin structure, several extrinsic factors, such as cation type or pH, have been shown to define the cation binding of pectin. This review paper focuses on the research progress in the field of pectin-divalent cation interactions and associated functional properties. In addition, it addresses the main research gaps and challenges in order to clearly understand the influence of pectin structural properties on its divalent cation-binding capacity and associated functionalities. This review reveals that many factors, including pectin molecular structure and extrinsic factors, influence pectin-cation interactions and its associated functionalities, which makes it difficult to predict the pectin-cation-binding capacity. Despite the limited information available, determination of the cation-binding capacity of pectins with distinct structural properties using equilibrium adsorption experiments or isothermal titration calorimetry is a promising tool to gain fundamental insights into pectin-cation interactions. These insights can then be used in targeted pectin structural modification, in order to optimize the cation-binding capacity and to promote pectin-cation interactions, for instance for a structure build-up in food products without compromising the mineral nutrition value.