Preparation of micro-nanofibrous chitosan sponges with ternary solvents for dye adsorption

One-step fabrication of millimeter-scale hollow vesicles with chitosan /DADMAC/ sodium alginate graft copolymer for enhanced anionic dye adsorption

Hollow vesicles are promising in water treatment due to their unique structure of the membrane and inner cavity. However, the adsorption capacity needs to be improved for targeted pollutants. Herein, millimeter-scale hollow vesicles were prepared with a one-step process of sequential stirring and grafting using chitosan, diallyldimethylammonium chloride, and sodium alginate as raw materials with the purpose of efficient removal of anionic dyes from wastewater. The composite vesicles were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The hollow vesicles showed the structure of the cationic membrane and the inner cavity, facilitating the dye adsorption. The adsorption capacity for the anionic dye Reactive Black 5 reached 698.1 mg/g, more than twice that of the binary composite vesicles without graft. The adsorption kinetics and isotherm data coincided with the pseudo-second-order and Langmuir models, respectively, and the adsorption mechanism was monolayer chemisorption. Moreover, the vesicles worked well in wide ranges of environment pH, temperature, and co-existing pollutants. They also possessed excellent cyclic regeneration performance, in which 93 % of the initial adsorption capacity was maintained after four cycles. These results indicate that the millimeter-scale hollow vesicles exhibit broad application prospects for wastewater purification.

Emerging environmentally friendly bio-based nanocomposites for the efficient removal of dyes and micropollutants from wastewater by adsorption: a comprehensive review

Water scarcity will worsen due to population growth, urbanization, and climate change. Addressing this issue requires developing energy-efficient and cost-effective water purification technologies. One approach is to use biomass to make bio-based materials (BBMs) with valuable attributes. This aligns with the goal of environmental conservation and waste management. Furthermore, the use of biomass is advantageous because it is readily available, economical, and has minimal secondary environmental impact. Biomass materials are ideal for water purification because they are abundant and contain important functional groups like hydroxyl, carboxyl, and amino groups. Functional groups are important for modifying and absorbing contaminants in water. Single-sourced biomass has limitations such as weak mechanical strength, limited adsorption capacity, and chemical instability. Investing in research and development is crucial for the development of efficient methods to produce BBMs and establish suitable water purification application models. This review covers BBM production, modification, functionalization, and their applications in wastewater treatment. These applications include oil-water separation, membrane filtration, micropollutant removal, and organic pollutant elimination. This review explores the production processes and properties of BBMs from biopolymers, highlighting their potential for water treatment applications. Furthermore, this review discusses the future prospects and challenges of developing BBMs for water treatment and usage. Finally, this review highlights the importance of BBMs in solving water purification challenges and encourages innovative solutions in this field.

Paddle-Wheel-Shaped Porous Cu(II)-Organic Framework with Two Different Channels as an Absorbent for Methylene Blue

The destruction of the ecological environment caused by human activity and modern industrial development is so severe that the water environment has become seriously polluted. Therefore, the exploration of high-efficiency absorbents has become one of the hot topics to solve this issue. Herein, a porous metal-organic framework [Cu(L)]·2.5H₂O·0.5DMF (1, DMF = N,N-dimethylformamide) was successfully constructed using a rigid N-heterocyclic 5-(4-(1H,3,4-triazol-1-yl)phenyl)isophthalic acid (H₂L) ligand. In particular, its structure includes the classical paddle-wheel-shaped secondary building units and two 1D channels with diameters of 7.2 and 3.2 Å, respectively. Complex 1 shows great sorption performance for methylene blue (MB) with a maximum capacity of 589 mg·g^-1. The various influence factors, including the time, dye concentration, adsorbent dosage, and the pH of the solution, are investigated respectively. Also, the adsorption process is more in line with the first-order kinetics and the Langmuir isothermal adsorption model. The strong electrostatic force and intermolecular forces are primarily responsible for the remarkable adsorption ability of MB.

Cage-Based Covalent Organic Framework for the Effective and Efficient Removal of Malachite Green from Wastewater

A cage-covalent organic framework (COF)-TP {T = bis(tetraoxacalix[2]arene[2]triazine); P = piperazine}, a novel two-dimensional covalent organic skeleton substituted with a nucleophilic cyanuric chloride analogue, was synthesized by a simple polymerization process. Cage-COF-TP is advantageous owing to its good structural order, permanent porosity, and low preparation cost. This skeleton was employed as a cost-effective adsorbent for the intermittent adsorption of an organic dye from aqueous solutions. Adsorption experiments were carried out at different initial dye concentrations, contact times, and solution pH. The adsorption kinetics followed the pseudo-second order model, and the results of thermodynamic studies were consistent with the Langmuir isotherm model. The high degree of matching between the size and shape of malachite green (MG) and the shrunken channels present in Cage-COF-TP were responsible for the enhanced adsorption ability of this material. Furthermore, theoretical calculations indicated that the high adsorption of the studied adsorbent can be attributed to the presence of nitrogen-rich triazine units in the Cage-COF-TP, which are expected to strengthen its affinity to guest molecules. The obtained results showed that the developed adsorbent is an efficient adsorbent that is theoretically capable of stimulating the removal of ∼2000 mg/g MG from wastewater at ambient temperature. This study will therefore be expected to promote the development of new functional materials based on COFs.

Simultaneous adsorption for cationic and anionic dyes using chitosan/electrospun sodium alginate nanofiber composite sponges

The coexistence of anionic and cationic dyes in dye wastewater has highlighted a great necessity to develop amphoteric adsorbents for their simultaneous removal. Herein, an amphoteric composite sponge was successfully fabricated by combining chitosan with electrospun sodium alginate nanofiber using lyophilization in acetic acid/water/dioxane mixed solvents, which owned the abundant functional groups and superior microstructure of interconnected pores and nanoscale fibers, beneficial for the adsorption capacity improvement. The optimum adsorption capacities for Acid Blue-113 and Rhodamine B were 926.2 ± 25.7 mg/g and 695.4 ± 17.0 mg/g, respectively, much higher than that of the controlled sample prepared with chitosan and non-spinning sodium alginate in traditional acetic acid/water solvents. Meanwhile, the sponge provided with the superior adsorption performance under various pH environment and cyclic adsorption. Importantly, it had considerable simultaneous adsorption capacity for binary system containing anionic and cationic dyes. Overall, the chitosan/electrospun sodium alginate nanofiber composite sponge shows potential for complex wastewater treatment.

Chitosan-based hybrid materials for adsorptive removal of dyes and underlying interaction mechanisms

Environmental pollution by dyes molecules has become a subject of intensive research in recent years due to their hazardous effects on human health, organisms, and animals. Effective treatment and removal of dye molecules from the environmental matrices and water sources are of supreme concern. The deployment of cheap, safe, green, sustainable, and eco-friendly materials to remove these pollutants from water is the main challenge during the last decades. Chitosan and its derivatives/composites, as a cheap, easily available, and environmentally friendly sorbent, have attracted increasing attention for the removal of dye molecules. This review article focuses on the application of chitosan and chitosan-based smart adsorbents for the removal of dyes. Recent methods for the preparation of chitosan-based composites and their application in the removal of dyes are discussed. Moreover, the possible mechanisms for the interaction of chitosan and chitosan-based adsorbents with dyes molecules were evaluated. Finally, future prospects of using chitosan as an adsorbent for the removal of dye molecules are directed.

Preparation of fibrous chitosan/sodium alginate composite foams for the adsorption of cationic and anionic dyes

Natural polysaccharide is attractive for preparing the environmentally friendly and highly efficient adsorbent. However, to obtain an efficient amphoteric absorbent for dealing with complex wastewater is still challenging. Herein, fibrous chitosan/sodium alginate composite foams were prepared by lyophilization with ternary acetic acid/water/tetrahydrofuran solvents, which had suitable morphology of interconnected pores and microscale fibers for dye adsorption. The amphoteric composite foams showed high adsorption capacities for both anionic Acid Black-172 (817.0 mg/g) and cationic Methylene Blue (1488.1 mg/g), which were far superior to those of the control samples prepared with traditional solvents of acetic acid/water. The adsorption kinetics and isotherm data showed that the adsorption followed the pseudo-second-order and Langmuir model. Further thermodynamics analysis revealed the adsorption was a spontaneous process. Meanwhile, the foams achieved effective adsorption capacity of AB-172 and MB dyes under a wide range of environmental pH, and maintained high adsorption efficiency even after four cycles. The adsorption mechanism is chemisorption, where the adsorption capacities for the anionic and cationic dyes were dependent on the mass ratio of chitosan to sodium alginate. As a novel amphoteric adsorbent, the fibrous chitosan/sodium alginate composite foam shows the potential to remove both cationic and anionic dyes from wastewaters.

Construction of a hydrophobic magnetic aerogel based on chitosan for oil/water separation applications

Hydrophobic/oleophilic absorbents have been largely studied and used in recovering spilled oil. However, they still suffer from several drawbacks and two of them are poor biocompatibility and hard to thoroughly rinse. In order to address these problems, here a hydrophobic magnetic chitosan-based aerogel is fabricated via electrostatic interactions between chitosan (CS), itaconic acid (IA) and Fe₃O₄ nanoparticles and dip-coating in ethanol solution of Candelilla wax (CW). Due to the interconnected porous structure of chitosan-based aerogel, the magnetism of Fe₃O₄ nanoparticles and the hydrophobicity of CW, the prepared aerogel exhibits high absorption capacities (from 17.7 to 43.8 g/g) towards various types of organic liquids, excellent magnetic controllability with saturation magnetization of 15.93 emu/g and good water repellency with water contact angle (WCA) of 147.9°. In addition, the aerogel can also continuously separate immiscible oil/water mixtures and water-in-oil emulsions as the form of filter. More significantly, the absorbed organic liquids can be completely recovered by simply placing the aerogel in water solution of IA at 75 °C, which can avoid cleaning agent consumption. As a consequence, this renewable, biodegradable and eco-friendly oil scavenger presents a bright prospect in practical applications.

Green synthesis of magnetic 3D bio-adsorbent by corn straw core and chitosan for methylene blue removal

In this work, a novel bio-adsorbent with a unique structure was prepared through one-step crosslinking in the emulsion using corn straw core (CSC), CoFe₂O₄ and chitosan (CS) as raw materials for adsorption of methylene blue (MB). The preparation method of the adsorbent was simple and environmentally friendly. In the adsorbent, the agricultural waste of CSC acted as scaffold and was wrapped with CS. CoFe₂O₄ was embedded in CS, giving magnetic property to the adsorbent, which was beneficial to the separation process. XRD, FTIR, SEM and TEM were utilized to characterize the adsorbent and the factors affecting adsorption removal efficiency were explored. The pseudo-second-order model and the Langmuir model described the adsorption behaviour well. The equilibrium adsorption capacity was 122 mg g^-1 for MB at 298 K. The thermodynamic studies suggested that the adsorption was a spontaneous, exothermic and randomness decrease process. MB loaded on the adsorbent could be desorbed by immersing in dilute acid solution, indicating that this kind of biomass adsorbent can be widely used in the field of adsorption.

Applications of cellulose and chitin/chitosan derivatives and composites as antibacterial materials: current state and perspectives

The bacterial infections have always a serious problem to public health. Scientists are developing new antibacterial materials to overcome this problem. Polysaccharides are promising biopolymers due to their diverse biological functions, low toxicity, and high biodegradability. Chitin and chitosan have antibacterial properties due to their cationic nature, while cellulose/bacterial cellulose does not possess any antibacterial activity. Moreover, the insolubility of chitin in common solvents, the poor solubility of chitosan in water, and the low mechanical properties of chitosan have restricted their biomedical applications. In order to solve these problems, chemical modifications such as quaternization, carboxymethylation, cationization, or surface modification of these polymers with different antimicrobial agents, including metal and metal oxide nanoparticles, are carried out to obtain new materials with improved physiochemical and biological properties. This mini review describes the recent progress in such derivatives and composites with potential antibacterial applications.