Preparation of smart and reversible wettability cellulose fabrics for oil/water separation using a facile and economical method

Robust nanoparticles growth in the interior of porous sponges for efficient dye adsorption and emulsion separation

Emulsified oils and dye contaminants already pose a huge threat to global ecosystems and human health. It is a significant research topic to develop efficient, rapid, versatile methods for emulsion separation and dye adsorption. The membrane material modified with common methods only modified the outer surface of the membrane, while the interior is hardly fully decorated. In this investigation, a solvent exchange method was used to in situ grow nanoparticles in the interior of a porous sponge. These nanoparticles were obtained with polyethyleneimine, gallic acid, and tannic acid via Michael addition and Schiff base reaction. The prepared nanoparticle-coated sponges provided efficient separation of dyes, emulsions, and complex contaminants. The separation efficiency of the dye reached 99.49%, and the separation efficiency of the emulsion was as high as 99.87% with a flux of 11140.3 L m-2 h-1. Furthermore, the maximum adsorption capacity reached 486.8 mg g-1 for cationic dyes and 182.1 mg g-1 for anionic dyes. More importantly, the nanoparticles were highly robust on the surface of the porous sponge, and the modified sponge could have long-term applications in hazardous environments. Overall, it is envisioned that the nanoparticles-modified porous sponge exhibited considerable potential for emulsion and dye wastewater treatment.

Recent advances in superwetting materials for separation of oil/water mixtures

Engineering surfaces or membranes that allow an efficient oil/water separation is highly desired in a wide spectrum of applications ranging from oily wastewater discharge to offshore oil spill accidents. Recent advances in biomimetics, manufacturing, and characterization techniques have led to remarkable progress in the design of various superwetting materials with special wettability. In spite of exciting progress, formulating a strategy robust enough to guide the design and fabrication of separating surfaces remains a daunting challenge. In this review, we first present an overview of the wettability theory to elucidate how to control the surface morphology and chemistry to regulate oil/water separation. Then, parallel approaches are considered for discussing the separation mechanisms according to different oil/water mixtures, and three separation types were identified including filtration, adsorption and other separation types. Finally, perspectives on the challenges and future research directions in this research area are briefly discussed.

Augmented antibacterial mechanism of ZnO nanoparticles by labyrinthian-channel configuration of maize-stalk carbohydrate columns and sustainable strategy for water decontamination

Zinc oxide nanoparticles (ZnO NPs) as a broad-spectrum germicide in environmental remediation applications, is hindered by mild toxicity to organisms during water sterilization. To solve this dilemma, this work provided an eco-benign approach to utilize maize stalk with natural labyrinthine-channel configuration simultaneously acting as microbe trap and bactericide carrier to arouse bactericidal response of ZnO NPs. The preparation comprises in-situ growing ZnO NPs, accompanied by nanoscale delignification, leading to formed carbohydrate complex retaining the intricately porous structure of the stalk. Assembled by maize-stalk carbohydrate (MSC) composites with 9 short composites in serial, the elimination of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) reached up 6.7 and 4.8 orders of magnitude, respectively. Labyrinth-framework MSC provided favorable sites for fusiform flower-like ZnO NPs to strongly adsorb (adsorption energy 5.5-11.7 eV) phosphoryl-involved biomacromolecules of bacterial envelops, causing generation of stable Zn-P and Zn-O(H), then cell incompleteness, cellular redox imbalance and DNA damage. Breakthrough analysis exposed the MSC/ZnO-filter possessing remarkable features of antibacterial exhaustion rate (~ 1.06 g/L) and capacity (~ 9.6 × 10⁹ CFU/g) which were comparable with Ag-based composites. As evaluated by the logistic and Gompertz models, the filters effectively sterilized 0.97-10 L of environmental waters to meet the requirements of drinking water.

A Review on Nanocellulose and Superhydrophobic Features for Advanced Water Treatment

Globally, developing countries require access to safe drinking water to support human health and facilitate long-term sustainable development, in which waste management and control are critical tasks. As the most plentiful, renewable biopolymer on earth, cellulose has significant utility in the delivery of potable water for human consumption. Herein, recent developments in the application of nanoscale cellulose and cellulose derivatives for water treatment are reviewed, with reference to the properties and structure of the material. The potential application of nanocellulose as a primary component for water treatment is linked to its high aspect ratio, high surface area, and the high number of hydroxyl groups available for molecular interaction with heavy metals, dyes, oil-water separation, and other chemical impurities. The ability of superhydrophobic nanocellulose-based textiles as functional fabrics is particularly acknowledged as designed structures for advanced water treatment systems. This review covers the adsorption of heavy metals and chemical impurities like dyes, oil-water separation, as well as nanocellulose and nanostructured derivative membranes, and superhydrophobic coatings, suitable for adsorbing chemical and biological pollutants, including microorganisms.

Regenerated Cellulose Products for Agricultural and Their Potential: A Review

Cellulose is one of the most abundant natural polymers with excellent biocompatibility, non-toxicity, flexibility, and renewable source. Regenerated cellulose (RC) products result from the dissolution-regeneration process risen from solvent and anti-solvent reagents, respectively. The regeneration process changes the cellulose chain conformation from cellulose I to cellulose II, leads the structure to have more amorphous regions with improved crystallinity, and inclines towards extensive modification on the RC products such as hydrogel, aerogel, cryogel, xerogel, fibers, membrane, and thin film. Recently, RC products are accentuated to be used in the agriculture field to develop future sustainable agriculture as alternatives to conventional agriculture systems. However, different solvent types and production techniques have great influences on the end properties of RC products. Besides, the fabrication of RC products from solely RC lacks excellent mechanical characteristics. Thus, the flexibility of RC has allowed it to be homogenously blended with other materials to enhance the final products' properties. This review will summarize the properties and preparation of potential RC-based products that reflect its application to replace soil the plantation medium, govern the release of the fertilizer, provide protection on crops and act as biosensors.

Current Status of Cellulosic and Nanocellulosic Materials for Oil Spill Cleanup

Recent developments in the application of lignocellulosic materials for oil spill removal are discussed in this review article. The types of lignocellulosic substrate material and their different chemical and physical modification strategies and basic preparation techniques are presented. The morphological features and the related separation mechanisms of the materials are summarized. The material types were classified into 3D-materials such as hydrophobic and oleophobic sponges and aerogels, or 2D-materials such as membranes, fabrics, films, and meshes. It was found that, particularly for 3D-materials, there is a clear correlation between the material properties, mainly porosity and density, and their absorption performance. Furthermore, it was shown that nanocellulosic precursors are not exclusively suitable to achieve competitive porosity and therefore absorption performance, but also bulk cellulose materials. This finding could lead to developments in cost- and energy-efficient production processes of future lignocellulosic oil spillage removal materials.

Superhydrophobic functionalized cellulosic paper by copper hydroxide nanorods for oils purification

Oily water contamination has been sighted as one of the most global environmental pollution. Herein, copper hydroxide nanorods layer was constructed onto cellulosic filter paper surface cured with polydopamine, Ag nanoparticles, and Cu NPs through immersion method. This work has been aimed to produce a superhydrophobic and superoleophilic cellulosic filter paper. The structure, crystalline, and morphological properties of these modified cellulosic filter paper were investigated. Scanning electron microscope images confirmed that the modified surface was rougher compared with the pristine surface. The contact angle measurement confirmed the hydrophobic nature of these modified surfaces with a water contact angle of 169.7°. The absorption capacity was 8.2 g/g for diesel oil and the separation efficiency was higher than 99%. It was noted that the flux in the case of low viscosity solvent as n-hexane was 9663.5 Lm-2 h-1, while for the viscous oil as diesel was 1452.7 Lm-2 h-1.

Cellulose-based special wetting materials for oil/water separation: A review

Oil spill accidents and oily wastewater discharged by petrochemical industries have severely wasted water resources and damaged the environment. The use of special wetting materials to separate oil and water is efficient and environment-friendly. Cellulose is the most abundant renewable resource and has natural advantages in removing pollutants from oily wastewater. The application and modification of cellulose as special wetting materials have attracted considerable research attention. Therefore, we summarized cellulose-based superlipophilic/superhydrophobic and superhydrophilic/superoleophobic materials exhibiting special wetting properties for oil/water separation. The treatment mechanism, preparation technology, treatment effect, and representative projects of oil-bearing wastewater are discussed. Moreover, cellulose-based intelligent-responsive materials for application to oil/water separation and the removal of other pollutants from oily wastewater have also been summarized. The prospects and potential challenges of all the materials have been highlighted.

Surface Modification of Cellulose from Oat Hull with Citric Acid Using Ultrasonication and Reactive Extrusion Assisted Processes

This study aimed to produce modified cellulose extracted from oat hulls by an esterification reaction with citric acid (CA) employing ultrasonication and reactive extrusion assisted processes. Modified samples were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (DRX), scanning electron microscopy (SEM), wettability, oil and water absorption capacities, water adsorption capacity, and thermal stability. From FTIR results it can be observed a new band for all modified samples at 1735 cm−1, confirming the esterification. The morphology and crystallinity pattern of fibers were not affected by esterification, and crystallinity indexes ranged from 43% (unmodified cellulose) to 44–49% in modified samples. Both groups of samples, obtained by ultrasonication and reactive extrusion, showed decreases in water absorption capacities (1.63–1.71 g/g) compared to unmodified cellulose (9.38 g/g). It was observed an increase in oil retention capacity from 1.80 g/g (unmodified cellulose) to 4.57–7.31 g/g after esterification, and also the modified samples presented higher affinity by a non-polar solvent in the wettability test. The new properties of modified cellulose expand its use in the industry and prove that ultrasonication and reactive extrusion can be used to obtain esterified cellulose, being eco-friendly, simple, and convenient processes with short reaction times.

Electrospinning Nanofiber-Reinforced Aerogels for the Treatment of Bone Defects

Objective: Application of aerogels in bone tissue engineering is an emerging field, while the reports of electrospinning nanofiber-reinforced aerogels are limited. This research aimed at fabricating the nanofiber-reinforced aerogels and evaluating their physiochemical and biological properties. Approach: The chitosan (CS) aerogels incorporated with cellulose acetate (CA) and poly (ɛ-caprolactone) (PCL) nanofibers were fabricated via ball milling and freeze-drying techniques. Scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectrum, X-ray photoelectron spectroscopy (XPS), compressive experiment, and in vitro experiment were conducted to assess their physiochemical properties and biological behavior. Results: The SEM examination showed that satisfying morphology was attained in the CA/PCL/CS aerogels with incorporation of CA/PCL nanofibers and CS solution. The results of FT-IR and XPS indicated the perfect incorporation of CA, PCL, and CS. A compressive experiment confirmed that the CA/PCL/CS aerogels enhanced the compressive modulus of the pure CS aerogel. For in vitro experiment, the CA/PCL/CS composite scaffolds were proven to possess better cytocompatibility compared with the pure CS. Also, cells on the CA/PCL/CS showed well-extended morphology and could infiltrate into a porous scaffold. Furthermore, confocal experiment revealed that the CA/PCL/CS could also promote the osteogenic differentiation of MC3T3-E1 cells. Innovation: This study fabricated the nanofiber-reinforced aerogels mainly to optimize the cell/material interaction of the pure CS scaffold. Conclusion: The CA/PCL nanofibers not only improved the mechanical property of the CS aerogel to some extent but also facilitated cell adhesion and osteogenic differentiation. Thus, it could be considered a promising candidate for bone tissue engineering.

Preparation of transparent anti-pollution cellulose carbamate regenerated cellulose membrane with high separation ability

In this study, cellulose pulp and urea were used to synthesize cellulose carbamate (nitrogen content reaches 4.5%) by low-cost and environmentally friendly solid-liquid phase method. Cellulose carbamate fluid was prepared by using sodium hydroxide aqueous solution as solvent. The fluid was regenerated and formed in a coagulation bath, and finally a regenerated cellulose membrane with high transparency and separation ability was obtained. The simple chemical treatment of cellulose not only greatly increased the mass fraction of cellulose dissolution (It has reached 15%) and retains the original crystal form and thermal stability of cellulose. The surface of the membrane was relatively dense, and the inside has regular microchannel. The factors affect the transparency and water flux of regenerated cellulose membranes were discussed by orthogonal experimental range analysis. The ability of the regenerated cellulose membrane to reject dyes was tested. The results showed that the rejection of methyl blue and congo red reached 100%, and the rejection rate of methyl orange reached 60%. The oil/water separation ability and the anti-pollution ability of the regenerated cellulose membrane were tested. The oil/water separation effect reached 100%. This membrane may have application prospect in water treatment, biotechnology.

Trends in Advanced Functional Material Applications of Nanocellulose

The need to transition to more sustainable and renewable technology has resulted in a focus on cellulose nanofibrils (CNFs) and nanocrystals (CNCs) as one of the materials of the future with potential for replacing currently used synthetic materials. Its abundance and bio-derived source make it attractive and sought after as well. CNFs and CNCs are naturally hydrophilic due to the abundance of -OH group on their surface which makes them an excellent recipient for applications in the medical industry. However, the hydrophilicity is a deterrent to many other industries, subsequently limiting their application scope. In either light, the increased rate of progress using CNCs in advanced materials applications are well underway and is becoming applicable on an industrial scale. Therefore, this review explores the current modification platforms and processes of nanocellulose directly as functional materials and as carriers/substrates of other functional materials for advanced materials applications. Niche functional attributes such as superhydrophobicity, barrier, electrical, and antimicrobial properties are reviewed due to the focus and significance of such attributes in industrial applications.