Chitosan composite microencapsulated comb-like polymeric phase change material via coacervation microencapsulation

Progress on control of harmful algae by sustained-release technology of allelochemical: A review

The outbreak of harmful algae blooms caused by water eutrophication seriously jeopardizes the aquatic ecological environment and human health. Therefore, algae control technology has attracted widespread attention between environmental scholars. Allelochemical sustained-release technology which releases the active ingredient to the target medium at a certain rate within the effective time, so that the system maintains a certain concentration, thus prolonging its influence on the target organism. Allelochemical sustained-release technology has become the focus of research due to the characteristics of high efficiency, safety, low-cost, environment friendly and no secondary pollution. This paper reviews the characteristics of allelochemical substances and the status quo of plant extraction, explains the detailed classification of allelochemical sustained-release microspheres (ASRMs) and the application of algae inhibition, summarizes the preparation method of ASRMs, elaborates on the mechanism of algae inhibition of sustained-release technology from the perspective of photosynthesis, cellular enzyme activity, algae cell structure, gene expression, and target site action. Focuses on the summary of the factors influencing the effect of algae inhibition of ASRMs, including particle size of sustained-release microspheres, selection of carrier materials, and the growth stage of algae. The future direction and prospect of algae inhibition by allelochemical sustained-release technology were prospected to provide the scientific basis for water ecological restoration.

Cotton functionalized with polyethylene glycol and graphene oxide for dual thermoregulating and UV-protection applications

A thermoregulating smart textile based on phase change material (PCM) polyethylene glycol (PEG) was prepared by chemically grafting carboxyl-terminated PEG onto cotton. Further deposits of graphene oxide (GO) nanosheets were made on the PEG grafted cotton (PEG-g-Cotton) to improve the thermal conductivity of the fabric and to block harmful UV radiation. The GO-PEG-g-Cotton was characterized by Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), Raman spectroscopy, X-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and field emission-scanning electron microscopy (FE-SEM). With an enthalpy of 37 and 36 J/g, respectively, the DSC data revealed that the functionalized cotton's melting and crystallization maxima occurred at 58 °C and 40 °C, respectively. The thermogravimetric analysis (TGA) presented that GO-PEG-g-Cotton was thermally more stable in comparison to pure cotton. The thermal conductivity of PEG-g-Cotton increased to 0.52 W/m K after GO deposition, while pure cotton conductivity was measured as 0.045 W/m K. The improvement in the UV protection factor (UPF) of GO-PEG-g-Cotton was observed indicating excellent UV blocking. This temperature-regulating smart cotton offers a high thermal energy storage capability, better thermal conductivity, thermal stability, and excellent UV protection.

Modified Supporting Materials to Fabricate Form Stable Phase Change Material with High Thermal Energy Storage

Thermal energy storage (TES) is vital to the absorption and release of plenty of external heat for various applications. For such storage, phase change material (PCM) has been considered as a sustainable energy material that can be integrated into a power generator. However, pure PCM has a leakage problem during the phase transition process, and we should fabricate a form stable PCM composite using some supporting materials. To prevent the leakage problem during the phase transition process, two different methods, microencapsulation and 3D porous infiltration, were used to fabricate PCM composites in this work. It was found that both microsphere and 3D porous aerogel supported PCM composites maintained their initial solid state without any leakage during the melting process. Compared with the microencapsulated PCM composite, the 3D porous aerogel supported PCM exhibited a relatively high weight fraction of working material due to its high porosity. In addition, the cross-linked graphene aerogel (GCA) could reduce volume shrinkage effectively during the infiltration process, and the GCA supported PCM composite kept a high latent heat (∆H) and form stability.

Progress in the application of sustained-release drug microspheres in tissue engineering

Sustained-release drug-loaded microspheres provide a long-acting sustained release, with targeted and other effects. There are many types of sustained-release drug microspheres and various preparation methods, and they are easy to operate. For these reasons, they have attracted widespread interest and are widely used in tissue engineering and other fields. In this paper, we provide a systematic review of the application of sustained-release drug microspheres in tissue engineering. First, we introduce this new type of drug delivery system (sustained-release drug carriers), describe the types of sustained-release drug microspheres, and summarize the characteristics of different microspheres. Second, we summarize the preparation methods of sustained-release drug microspheres and summarize the materials required for preparing microspheres. Third, various applications of sustained-release drug microspheres in tissue engineering are summarized. Finally, we summarize the shortcomings and discuss future prospects in the development of sustained-release drug microspheres. The purpose of this paper was to provide a further systematic understanding of the application of sustained-release drug microspheres in tissue engineering for the personnel engaged in related fields and to provide inspiration and new ideas for studies in related fields.

Vaccine cold chain management and cold storage technology to address the challenges of vaccination programs

The outbreaks of infectious diseases that spread across countries have generally existed for centuries. An example is the occurrence of the COVID-19 pandemic in 2020, which led to the loss of lives and economic depreciation. One of the essential ways of handling the spread of viruses is the discovery and administration of vaccines. However, the major challenges of vaccination programs are associated with the vaccine cold chain management and cold storage facilities. This paper discusses how vaccine cold chain management and cold storage technology can address the challenges of vaccination programs. Specifically, it examines different systems for preserving vaccines in either liquid or frozen form to help ensure that they are not damaged during distribution from manufacturing facilities. Furthermore, A vaccine is likely to provide very low efficacy when it is not properly stored. According to preliminary studies, the inability to store vaccine properly is partly due to the incompetency of many stakeholders, especially in technical matters. The novelty of this study is to thoroughly explore cold storage technology for a faster and more comprehensive vaccine distribution hence it is expected to be one of the reference and inspiration for stakeholders.

A Review of Composite Phase Change Materials Based on Biomass Materials

Phase change materials (PCMs) can store/release heat from/to the external environment through their own phase change, which can reduce the imbalance between energy supply and demand and improve the effective utilization of energy. Biomass materials are abundant in reserves, from a wide range of sources, and most of them have a natural pore structure, which is a good carrier of phase change materials. Biomass-based composite phase change materials and their derived ones are superior to traditional phase change materials due to their ability to overcome the leakage of phase change materials during solid–liquid change. This paper reviews the basic properties, phase change characteristics, and binding methods of several phase change materials (polyethylene glycols, paraffins, and fatty acids) that are commonly compounded with biomass materials. On this basis, it summarizes the preparation methods of biomass-based composite phase change materials, including porous adsorption, microencapsulation based on biomass shell, and grafting by copolymerization and also analyzes the characteristics of each method. Finally, the paper introduces the latest research progress of multifunctional biomass-based composite phase change materials capable of energy storage and outlines the challenges and future research and development priorities in this field.

Herbal extracts and essential oils microencapsulation studies for different applications

Studies on bioactivities of numerous essential oils (EOs) and herbal extracts compounds against diseases are crucial. Microencapsulation methods development might be an alternative to obtain bioactive compounds for cosmetics and pharmaceutical uses. In this study, we carried out a literature review of 219 503 data articles using ScienceDirect, Redalyc, Web of Science, Scopus, SciELO, and Google Scholar databases in English and Spanish, after with inclusion (original articles, book chapters, and theoretical references) and exclusion criteria (frameworks description), we found 1854 restricting the publication years between 2004 and August 2020 and 35 relevant articles with our scope research. References found contained a collection of methods that could be utilized to create microcapsules, including coacervation, extrusion, polymerization, and spray drying. This article analyzed the most recent and advanced microencapsulation techniques and their applications in the food, cosmetic, and pharmaceutical industries. Herbal extracts and EOs have many applications, depending on the wall materials and microencapsulation methods that could help know about selective release and efficacy to ensure optimal dosing and other advantages; thus, improving the profitability of these product manufacturers.

Preparation and Performance of Dual-functional Magnetic Phase-change Microcapsules

The fabrication of desired anti-magnetic materials for irradiation shielding remains a challenge to date. In this work, a new type of dual-functional magnetic shielding phase change microcapsules with paraffin as the core, melamine-formaldehyde (MF) resin as the shell and doped with magnetic particles in the shell were successfully prepared by in situ polymerization. The magnetic particles were dispersed in the shell layer by coating a hydrophilic emulsifier on the surface. These microcapsules were specifically applied to the field of magnetic shielding by the screen printing method. The effect of magnetic particles on the performance of phase-change microcapsules was examined by differential scanning calorimetry and thermogravimetric analyses. The magnetic type and magnetic strength of the microcapsules were studied by the vibrating sample magnetometer. Moreover, the effects of different magnetic particles (Fe₃ O₄ , CrO₂ ) on the performance of phase change microcapsules and the magnetic strength of microcapsules were compared. The results showed that these two kinds of magnetic particles can greatly improve the phase change latent heat, thermal stability, and thermal conductivity of the microcapsules. Finally, the great magnetic shielding role of these microcapsules was demonstrated in both static and pulsed magnetic fields through the screen printing of magnetic shielding ink on wallpaper. Incorporating 0.5 g Fe₃ O₄ inside of microcapsules, specifically, the magnetic intensity was effectively reduced by ∼250 Oe within a short distance in the static field. We expect that these magnetic microcapsules hold great potential for the shielding of irradiations via the screen printing on various substrates.

Preparation and Characterization of Double-Layered Microcapsules Containing Nano-SiO2

The double-layered microencapsulation technology has been used in many fields. In this study, the double-layered microencapsulated anthocyanin of Passiflora edulis shells (APESs) was prepared via complex coacervation using gelatin and gum Arabic as the first wall materials (single-layered microcapsules (SMs)) and using gum Arabic containing nano-SiO2 as the second wall material (double-layered microcapsules (DMs)/nano-SiO2) to enhance the stability of the core material. Properties of microcapsules were analyzed on the basis of EE, morphology, scanning electron microscopy (SEM), droplet size, moisture content, and differential scanning calorimetry (DSC). The results showed that the EE values of SMs, DMs, and DMs/nano-SiO2 were 96.12%, 97.24%, and 97.85%, respectively. DMs/nano-SiO2 had the lowest moisture content (2.17%). The average droplet size of DMs/nano-SiO2 (34.93 μm) was higher than those of SMs and DMs. DSC indicated that the melting temperature of DMs/nano-SiO2 was 73.61°C and 45.33°C higher than those of SMs and DMs, respectively. SEM demonstrated that DMs/nano-SiO2 had the smoothest surface compared with the other two kinds of microcapsules. The storage stability of APESs and their microcapsules indicated that the stability of the microcapsules was improved by adding DMs/nano-SiO2 into the wall material of microcapsules. These results indicated double-layered microcapsules containing silica nanoparticles contribute to the stability of the core material.

Leakage-proof microencapsulation of phase change materials by emulsification with acetylated cellulose nanofibrils

We use acetylated cellulose nanofibrils (AcCNF) to stabilize transient emulsions with paraffin that becomes shape-stable and encapsulated phase change material (PCM) upon cooling. Rheology measurements confirm the gel behavior and colloidal stability of the solid suspensions. We study the effect of nanofiber content on PCM leakage upon melting and compare the results to those from unmodified CNF. The nanostructured cellulose promotes paraffin phase transition, which improves the efficiency of thermal energy exchange. The leakage-proof microcapsules display high energy absorption capacity (ΔH_m = 173 J/g) at high PCM loading (up to 80 wt%), while effectively controlling the extent of supercooling. An excellent thermal stability is observed during at least 100 heating/cooling cycles. Degradation takes place at 291 °C, indicating good thermal stability. The high energy density and the effective shape and thermal stabilization of the AcCNF-encapsulated paraffin points to a sustainable solution for thermal energy storage and conversion.

Solid solid phase change (SSPC) chitosan-g-mPEG fiber with improved mechanical performance via in-situ wet spinning process

Nowadays, environment-friendly and sustainable polymers have aroused great research attention, due to serious pollution caused by nondegradable and nonrenewable polymer waste. In this paper, chitosan (CS) grafted polyethylene glycol monomethyl ether (mPEG) (CS-g-mPEG) fiber, with solid-solid phase change (SSPC) behavior and improved mechanical performance, were prepared successfully by in-situ wet spinning process. The tensile strength of CS-g-mPEG fiber reached 1.36 cN/dtex, increased by more than 50 % contrasted with CS fiber, due to the enhancement of molecular entanglement and hydrogen bonding interactions. Particularly, CS-g-mPEG fiber with stable shape could actively absorb heat as ambient temperature above 46 °C, then would release heat as ambient temperature below 26 °C. So, the human body will not feel too cold or heat. Thus, this work do not only give a continuous process of fabricating SSPC CS-g-mPEG fiber for industry, but also provides an important choice for smart textiles.