Highly stretchable and transparent films based on cellulose

Enabling Lignocellulose-Sourced Feedstocks to Fabricate Optical Filters with Desired Blocking Wavelength

Near-infrared (NIR) filters have broad applications in fields such as information safety and privacy protection and environmental monitoring. Traditional NIR filters primarily rely on complex optical designs and environmentally unfriendly substrates, while lignocellulose-sourced NIR filters do not achieve the desired blocking wavelength and therefore face challenges in various application conditions. In this study, we propose a thickness adjustment strategy to precisely control the blocking wavelength of the NIR optical filters. The obtained optical filters with tailored thickness exhibited selective blocking wavelength in visible region (400-650 nm) as well as a high NIR transmittance (over 90%) and ultralow haze at 1400 nm. Given their selective wavelength blocking and high NIR transmittance, these bioselectors demonstrate potential applications in NIR optical fields, such as data security and privacy protection, presenting a promising advancement in next-generation sustainable NIR optical materials fabricated from all-lignocellulose feedstocks.

Enhanced properties of TEMPO-oxidized bacterial cellulose films via eco-friendly non-pressurized hot water vapor treatment for sustainable and smart food packaging

Developing a simple and environmentally friendly method to vary the physical, mechanical, and thermal properties of cellulose films is of great importance. This study aimed to characterize 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO)-oxidized bacterial cellulose (BC) films prepared using non-pressurized hot water vapor (NPHWV) method. A wet BC-pellicle that had been oxidized with TEMPO was treated with NPHWV for 60, 120, and 240 minutes, respectively. As a control, a TEMPO-oxidized BC (TOBC) film without NPHWV was prepared. The results show that the longer NPHWV duration of the TOBC film increased the tensile and thermal properties. This film became more hydrophobic and showed lower moisture absorption, thermal conductivity and organic solvent uptake, more crystalline structure, and higher fiber density after NPHWV treatment. The acquired results provide a simple, inexpensive, and ecologically friendly method for varying TOBC film properties.

Tough and Elastic Cellulose Composite Hydrogels/Films for Flexible Wearable Sensors

Cellulose and its composites, despite being abundant and sustainable, are typically brittle with very low flexibility/stretchability. This study reports a solution processing method to prepare porous, amorphous, and elastic cellulose hydrogels and films. Native cellulose dissolved in a water-ZnCl2 mixture can form ionic gels through in situ polymerization of acrylic acid (AA) to poly(acrylic acid) (PAA). The addition of up to 30 vol % AA does not change the solubility of cellulose in the water-ZnCl2 mixture. After polymerization, the formation of interpenetrated networks, resulting from the chemical cross-linking of PAA and the ionic/coordination binding among cellulose/PAA and ZnCl2, gives rise to strong, transparent, and ionically conductive hydrogels. These hydrogels can be used for wearable sensors to detect mechanical deformation under stretching, compression, and bending. Upon removal of ZnCl2 and drying the gels, semitransparent amorphous cellulose composite films can be obtained with a Young's modulus of up to 4 GPa. The rehydration of these films leads to the formation of tough, highly elastic composites. With a water content of 3-10.5%, cellulose-containing films as strong as paper also show typical characteristics of elastomers with an elongation of up to 1300%. Such composite films provide an alternative solution to resolving the material sustainability of natural polymers without compromising their mechanical properties.

Interaction mechanisms of edible film ingredients and their effects on food quality

Traditional food packaging has problems such as nondegradable and poor food safety. Edible films play an important role in food packaging, transportation and storage, having become a focus of research due to their low cost, renewable, degradable, safe and non-toxic characteristics. According to the different materials of edible films substrate, edible films are usually categorized into proteins, polysaccharides and composite edible films. Functional properties of edible films prepared from different substrate materials also vary, single substrate edible films are defective in some aspects. Functional ingredients such as proteins, polysaccharides, essential oils, natural products, nanomaterials, emulsifiers, and so on are commonly added to edible films to improve their functional properties, extend the shelf life of foods, improve the preservation of sensory properties of foods, and make them widely used in the field of food preservation. This paper introduced the classification, characteristics, and modification methods of common edible films, discussed the interactions among the substrate ingredients of composite edible films, the influence of functional ingredients on the properties of edible films, and the effects of modified edible films on the quality of food, aiming to provide new research ideas for the wide application and further study of edible films.

Stretchable and transparent alginate ionic gel film for multifunctional sensors and devices

Flexible and stretchable substrates based on pure natural polymers have attracted widespread attention for next-generation "green" electronics. However, fabrication of stretchable and "green" electronic sensors with integrated high stretchability, optical transmittance and good conductivity still remains tremendous challenges. Herein, alginate ionic gel films (AIGFs) with integrated high stretchability (tensile strength of 4.13 MPa and 191.1 % fracture strain) and excellent transparent properties (transparency of ∼92 %) are achieved by the glycerol inducing physical crosslinking and CaCl2 initiating ionic crosslinking, a simple soaking and drying strategy. The obtained gel films not only exhibit good ionic conductivity, but also high reliability, wide-range sensing, and multiple sensitivity to external stimulus. More importantly, these ionic conductive gel films as green substrates are successfully utilized for construction of flexible and patterned optoelectronic devices. This promising strategy will open up new powerful routes to construct highly stretchable, transparent, and ionic conductive substrates for multifunctional sensors and devices.

Advances in Biodegradable Electronic Skin: Material Progress and Recent Applications in Sensing, Robotics, and Human-Machine Interfaces

The rapid growth of the electronics industry and proliferation of electronic materials and telecommunications technologies has led to the release of a massive amount of untreated electronic waste (e-waste) into the environment. Consequently, catastrophic environmental damage at the microbiome level and serious human health diseases threaten the natural fate of the planet. Currently, the demand for wearable electronics for applications in personalized medicine, electronic skins (e-skins), and health monitoring is substantial and growing. Therefore, "green" characteristics such as biodegradability, self-healing, and biocompatibility ensure the future application of wearable electronics and e-skins in biomedical engineering and bioanalytical sciences. Leveraging the biodegradability, sustainability, and biocompatibility of natural materials will dramatically influence the fabrication of environmentally friendly e-skins and wearable electronics. Here, the molecular and structural characteristics of biological skins and artificial e-skins are discussed. The focus then turns to the biodegradable materials, including natural and synthetic-polymer-based materials, and their recent applications in the development of biodegradable e-skin in wearable sensors, robotics, and human-machine interfaces (HMIs). Finally, the main challenges and outlook regarding the preparation and application of biodegradable e-skins are critically discussed in a near-future scenario, which is expected to lead to the next generation of biodegradable e-skins.

3D printing of resilient biogels for omnidirectional and exteroceptive soft actuators

Soft robotics greatly benefits from nature as a source of inspiration, introducing innate means of safe interaction between robotic appliances and living organisms. In contrast, the materials involved are often nonbiodegradable or stem from nonrenewable resources, contributing to an ever-growing environmental footprint. Furthermore, conventional manufacturing methods, such as mold casting, are not suitable for replicating or imitating the complexity of nature's creations. Consequently, the inclusion of sustainability concepts alongside the development of new fabrication procedures is required. We report a customized 3D-printing process based on fused deposition modeling, printing a fully biodegradable gelatin-based hydrogel (biogel) ink into dimensionally stable, complex objects. This process enables fast and cost-effective prototyping of resilient, soft robotic applications from gels that stretch to six times their original length, as well as an accessible recycling procedure with zero waste. We present printed pneumatic actuators performing omnidirectional movement at fast response times (less than a second), featuring integrated 3D-printed stretchable waveguides, capable of both proprio- and exteroception. These soft devices are endowed with dynamic real-time control capable of automated search-and-wipe routines to detect and remove obstacles. They can be reprinted several times or disposed of hazard-free at the end of their lifetime, potentially unlocking a sustainable future for soft robotics.

Increasing efficiency of the homogenization process for production of chitin nanofibers for barrier film applications

Chitin nanofibers (ChNFs) are of interest for barrier materials but are often extracted by high pressure homogenization (HPH) with high energy utilization. We studied the influence of deacetylation (DA) and pressure on HPH of shrimp chitin and the resulting solution cast films. Deacetylation to 72% DA resulted in improved ChNF suspension and film light transmission, strain at break, and tensile strength compared to chitin with DA of 89%. The oxygen permeability (OP) of the films was not affected by the modification and remained at low values of 1.9-2.4 cm³ μm/m²/day/kPa. We also show that deacetylation enables HPH intensity to be reduced during extraction of ChNFs from crab shell chitin (63% lower pressure and 73% reduction in number of passes), while achieving a low OP. Deacetylation pretreatment reduces HPH process intensity required to achieve oxygen barrier properties in ChNF films.

Application of Bacterial Cellulose in the Textile and Shoe Industry: Development of Biocomposites

Several studies report the potential of bacterial cellulose (BC) in the fashion and leather industries. This work aimed at the development of BC-based composites containing emulsified acrylated epoxidized soybean oil (AESO) that are polymerized with the redox initiator system hydrogen peroxide (H2O2) and L-ascorbic acid and ferrous sulfate as a catalyst. BC was fermented under static culture. The polymerization of the emulsified organic droplets was tested before and after their incorporation into BC by exhaustion. The composites were then finished with an antimicrobial agent (benzalkonium chloride) and dyed. The obtained composites were characterized in terms of wettability, water vapor permeability (WVP), mechanical, thermal and antimicrobial properties. When AESO emulsion was polymerized prior to the exhaustion process, the obtained composites showed higher WVP, tensile strength and thermal stability. Meanwhile, post-exhaustion polymerized AESO conferred the composite higher hydrophobicity and elongation. The composites finished with the antimicrobial agent showed activity against S. aureus. Finally, intense colors were obtained more uniformly when they were incorporated simultaneously with the emulsified AESO with all the dyes tested.

A conductive polymer composed of a cellulose-based flexible film and carbon nanotubes

As a natural biological material, wood has renewability, biocompatibility, biodegradability and excellent mechanical properties. This research shows a conductive polymer composed of a cellulose-based flexible film constructed from natural wood and carbon nanotubes. Part of the lignin/hemicellulose of the natural wood was removed by the deep eutectic solvent to obtain a cellulose-based flexible film with a porous structure, and then the carbon nanotubes were infiltrated into the cellulose-based flexible film by vacuum pressure impregnation treatment to obtain the final conductive polymer. This conductive polymer has high conductivity and good toughness, and shows good perception ability under a certain range of strain/stress or human activity conditions. In addition, conductive fibers can be prepared by cutting and twisting the oriented cellulose nanofibers of this conductive polymer. The above-mentioned properties of this conductive polymer provide great potential for its development in electrical-related fields.

Synthesis of dextrin-polyacrylamide and boric acid based tough and transparent, self-healing, superabsorbent film

Stretchabiliy, transparency and self-healing ability of bio-based materials are some of the important features for their utilization in the biomedical field. Recently, robust self-healing super porous materials possessing multifunctional nature have raised enormous interest among the researchers in order to design different materials which can be used in industrial, biomedical and pharmaceutical fields. Herein, a novel self-healing, stretchable and transparent superabsorbent film based on Dextrin-polyacrylamide and Boric Acid (D_EX-cl-polyAAm) was synthesized using a free radical reaction mechanism. In distilled water, the maximum water absorptivity of the synthesized film was reported to be 3156% after the optimization of various reaction parameters. The film was also found to show structural integrity in urea solution, phosphate buffer and solutions of different pH. Lastly, the viscoelastic and self-healing analysis of the film suggested its utility towards biomedical field.

Rendering Banana Plant Residues into a Potentially Commercial Byproduct by Doping Cellulose Films with Phenolic Compounds

This study seeks to render residues from banana plants into a useful byproduct with possible applications in wound dressings and food packaging. Films based on cellulose extracted from banana plant pseudostem and doped with phenolic compounds extracted from banana plant leaves were developed. The phenolic compounds were extracted using batch solid-liquid and Soxhlet methods, with different drying temperatures and periods of time. The total phenolic content and antioxidant activity were quantified. The optimum values were obtained using a three-day period batch-solid extraction at 40 °C (791.74 ± 43.75 mg/L). SEM analysis indicates that the pseudostem (PS) films have a porous structure, as opposed to hydroxyethyl cellulose (HEC) films which presented a homogeneous and dense surface. Mechanical properties confirmed the poor robustness of PS films. By contrast HEC films manifested improved tensile strength at low levels of water activity. FTIR spectroscopy reinforced the need to improve the cellulose extraction process, the success of lignin and hemicellulose removal, and the presence of phenolic compounds. XRD, TGA and contact angle analysis showed similar results for both films, with an amorphous structure, thermal stability and hydrophilic behavior.

Improved mechanical and ultraviolet shielding performances of hydroxyethyl cellulose film by using aramid nanofibers as additives

Recently, aramid nanofibers (ANFs) have drawn the attention of scientist due to the high mechanical strength, high-temperature resistance, and high electrical and thermal insulation properties. In this work, we aimed at improving the mechanical and ultraviolet shielding properties of hydroxyethyl cellulose (HEC) film by using ANFs as additives. Mechanical results show that the 1.0 % ANFs could improve the tensile strength of pure HEC film by 176.6 %. Meanwhile, the ANFs additives can also enable the HEC film excellent ultraviolet (UV) shielding and visible light transmittance, as well as high UV radiation resistance ability. It is believed that the high mechanical strength of the HEC/ANFs composites is derived from the rearrangement of HEC chains along the tensile direction after the addition of hard ANFs and the enhanced hydrogen bonds between HEC and ANFs.

Hydrophobic Shape-Memory Biocomposites from Tung-Oil-Based Bioresin and Onion-Skin-Derived Nanocellulose Networks

The fabrication of smart biocomposites from sustainable resources that could replace today’s petroleum-derived polymer materials is a growing field of research. Here, we report preparation of novel biocomposites using nanocellulose networks extracted from food residue (onion skin) and a vegetable oil-based bioresin. The resin was synthesized via the Diels-Alder reaction between furfuryl methacrylate and tung oil at various ratios of the components. The onion-skin-extracted cellulose nanofiber and cellulose nanocrystal networks were then impregnated with the resins yielding biocomposites that exhibited improved mechanical strength and higher storage modulus values. The properties of the resins, as well as biocomposites, were affected by the resin compositions. A 190–240-fold increase in mechanical strength was observed in the cellulose nanofiber (CNF) and cellulose nanocrystal (CNC)-reinforced biocomposites with low furfuryl methacrylate content. The biocomposites exhibited interesting shape-memory behavior with 80–96% shape recovery being observed after 7 creep cycles.

Hydration/Dehydration Behavior of Hydroxyethyl Cellulose Ether in Aqueous Solution

Hydroxyethyl cellulose (HeC) maintains high water solubility over a wide temperature range even in a high temperature region where other nonionic chemically modified cellulose ethers, such as methyl cellulose (MC) and hydroxypropylmethyl cellulose (HpMC), demonstrate cloud points. In order to clarify the reason for the high solubility of HeC, the temperature dependence of the hydration number per glucopyranose unit, n_H, for the HeC samples was examined by using extremely high frequency dielectric spectrum measuring techniques up to 50 GHz over a temperature range from 10 to 70 °C. HeC samples with a molar substitution number (MS) per glucopyranose unit by hydroxyethyl groups ranging from 1.3 to 3.6 were examined in this study. All HeC samples dissolve into water over the examined temperature range and did not show their cloud points. The value of n_H for the HeC sample possessing the MS of 1.3 was 14 at 20 °C and decreased gently with increasing temperature and declined to 10 at 70 °C. The n_H values of the HeC samples are substantially larger than the minimum critical n_H value of ca. 5 necessary to be dissolved into water for cellulose ethers such as MC and HpMC, even in a high temperature range. Then, the HeC molecules possess water solubility over the wide temperature range. The temperature dependence of n_H for the HeC samples and triethyleneglycol, which is a model compound for substitution groups of HeC, is gentle and they are similar to each other. This observation strongly suggests that the hydration/dehydration behavior of the HeC samples was essentially controlled by that of their substitution groups.

Effect of heat treatment on thermal resistance, transparency and antimicrobial activity of sonicated ginger cellulose film

Transparent film with high thermal resistance and antimicrobial properties has many applications in the food packaging industry particularly packaging for reheatable food. This work investigates the effects of heat treatment on the thermal resistance, stability of transparency and antimicrobial activity of transparent cellulose film. The film from ginger nanocellulose fibers was prepared with chemicals and ultrasonication. The dried film was heated at 150 °C for 30, 60, 90, or 120 min. The unheated and sonicated film had the lowest crystallinity index and the lowest thermal properties. After heating, the film became brownish-yellow resulting from thermal oxidation. The reheated film had higher thermal resistance than unheated film. Heating led to further relaxation of cellulose network evidenced by shifting of the XRD peak positions toward lower values. The antimicrobial activity decreased due to heating. Average opacity value increases after short heating durations. It was relatively stable for further heating.

Bacterial Cellulose and Emulsified AESO Biocomposites as an Ecological Alternative to Leather

This research investigated the development of bio-based composites comprising bacterial cellulose (BC), as obtained by static culture, and acrylated epoxidized soybean oil (AESO) as an alternative to leather. AESO was first emulsified; polyethylene glycol (PEG), polydimethylsiloxane (PDMS) and perfluorocarbon-based polymers were also added to the AESO emulsion, with the mixtures being diffused into the BC 3D nanofibrillar matrix by an exhaustion process. Scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy analysis demonstrated that the tested polymers penetrated well and uniformly into the bulk of the BC matrix. The obtained composites were hydrophobic and thermally stable up to 200 °C. Regarding their mechanical properties, the addition of different polymers lead to a decrease in the tensile strength and an increase in the elongation at break, overall presenting satisfactory performance as a potential alternative to leather.