Chitosan and carboxymethyl cellulose-multilayered magnetic fluorescent systems for reversible protein immobilization

Supramolecular Chemistry of Carbon-Based Dots Offers Widespread Opportunities

Carbon dots are an emerging class of nanomaterials that has recently attracted considerable attention for applications that span from biomedicine to energy. These photoluminescent carbon nanoparticles are defined by characteristic sizes of <10 nm, a carbon-based core and various functional groups at their surface. Although the surface groups are widely used to establish non-covalent bonds (through electrostatic interactions, coordinative bonds, and hydrogen bonds) with various other (bio)molecules and polymers, the carbonaceous core could also establish non-covalent bonds (ππ stacking or hydrophobic interactions) with π-extended or apolar compounds. The surface functional groups, in addition, can be modified by various post-synthetic chemical procedures to fine-tune the supramolecular interactions. Our contribution categorizes and analyzes the interactions that are commonly used to engineer carbon dots-based materials and discusses how they have allowed preparation of functional assemblies and architectures used for sensing, (bio)imaging, therapeutic applications, catalysis, and devices. Using non-covalent interactions as a bottom-up approach to prepare carbon dots-based assemblies and composites can exploit the unique features of supramolecular chemistry, which include adaptability, tunability, and stimuli-responsiveness due to the dynamic nature of the non-covalent interactions. It is expected that focusing on the various supramolecular possibilities will influence the future development of this class of nanomaterials.

Self-assembled emulsion gel based on modified chitosan and gelatin: Anti-inflammatory and improving cellular uptake of lipid-soluble actives

To obtain a green carrier for intestinal targeted delivery, an emulsion gel was designed by the self-assembly between gelatin and Pickering emulsion based on gallic acid modified-chitosan nanoparticles (GCS NPs). The emulsion gels loaded with garlic essential oil (Geo) and curcumin (Cur) were abbreviated as GOEG and GCEG, respectively. Meanwhile, the sodium alginate bead loaded with Geo (GOEGS₃) and the bead loaded with Cur (GCEGS) were prepared as controls. Results demonstrated that the emulsion gels significantly improved the bioaccessibility of Geo and Cur, showing great intestinal targeting delivery properties comparable to that of sodium alginate beads. Moreover, Caco-2 cell experiments indicated that GOEG and GCEG displayed good biocompatibility and enhanced cellular uptake of Geo and Cur. The emulsion gels also exhibited excellent anti-inflammatory properties in the lipopolysaccharide-induced cell model, exhibiting great potential for clinical application. This work provides some references for the preparation of multifunctional emulsion gels with excellent delivery performance by a green method.

Quality assessment of lemon (Citrus aurantifolia, swingle) coated with self-healed multilayer films based on chitosan/carboxymethyl cellulose under cold storage conditions

The polyelectrolyte multilayer self-healing coating film of chitosan and carboxymethyl cellulose (PEM-SH) tended to maintain high sensory quality and control physiological and pathological decay of lemon fruits under cold storage. The PEM-SH film was characterized by ATR-IR, XRD, X-ray photoelectron spectroscopy, SEM analysis, swelling ratio, self-healing, and mechanical characteristics. The 3-layered film (3L) exhibited the optimum barrier properties; WVP: 3.32 ± 0.06 g. mm. k Pa^-1.h^-1.m^-2 and GTR: 0.256 ± 0.032 cc.M^-2.day^-1. The moisture sorption isotherm data were fitted with BET, GAB, and Peleg models and three models showed applicability. The coated fruits exhibit superior features of fruit quality such as reduced weight loss %, respiration rate, and decay symptoms appearance. The 3L-coated fruit showed the lower pectinase enzyme activity (0.689 Ug^-1 FW) up to 60 days. As well as, increased total soluble solids, keeping vitamin C of loss and decreasing percentage acidity of juice up to 60 days.

Sodium carboxymethylcellulose induced engineering a porous carbon and graphene immobilized magnetite composite for lithium-ion storage

Immobilizing nanosized electrochemically active materials with supportive carbonaceous framework usually brings in improved lithium-ion storage performance. In this work, magnetite nanoparticles (Fe₃O₄) are stabilized by both porous carbon domains (PC) and reduced graphene oxide sheets (RGO) to form a hierarchical composite (Fe₃O₄@PC/RGO) via a straightforward approach. The PC confined iron nanoparticle intermediate sample (Fe@PC) was first fabricated, where sodium carboxymethylcellulose (Na-CMC) was employed not only as a cross-linker to trap ferric ions for synthesizing a Fe-CMC precursor sample, but also as the carbon source for PC domains and iron source for Fe nanoparticles in a pyrolysis process. The final redox reaction between Fe@PC and few-layered graphene oxide (GO) sheets contributed to the formation of Fe₃O₄ nanoparticles with reduced size, avoiding any severe aggregation or excessive exposure. The Fe₃O₄@PC/RGO sample delivered a specific capacity of 522.2 mAh·g^-1 under a current rate of 1000 mA·g^-1 for 650 cycles. The engineered Fe@PC and Fe₃O₄@PC/RGO samples have good prospects for application in wider fields.

Carboxymethylcellulose-chitosan film modified magnetic alkaline Ca-bentonite for the efficient removal of Pb(II) and Cd(II) from aqueous solution

In order to endow alkaline Ca-bentonite (ACB) with magnetic separation ability, simultaneously obtain better magnetic stability and stronger removal capacity of heavy metal cations; magnetic alkaline Ca-bentonite/carboxymethylcellulose-chitosan film (MACB/C-C) was prepared by organic modification of magnetic alkaline Ca-bentonite (MACB) using non-toxic carboxymethylcellulose and chitosan. Textural characterization results revealed that magnetic Fe3O4 nanoparticles were successfully immobilized on ACB and modified with C-C. The functionalized layer of C-C concurrently enhanced the stability of Fe3O4 and removal performances of heavy metal cations. Adsorption results indicated that MACB/C-C exhibited thorough separation from aqueous solution and greater uptake ability for Pb(II) and Cd(II) (483 mg·g-1 and 123 mg·g-1) than the nascent MACB (335 mg·g-1 and 76 mg·g-1), respectively, at pH 5 and 25 °C temperature. The adsorption of Pb(II) and Cd(II) on MACB/C-C mainly occurred via surface precipitation and complexation when pH > 2. MACB/C-C could be efficiently recycled with marginal decrease in adsorption capacity. The current approach credited to the convenient operation, simplified synthesis, and high efficiency of MACB/C-C could be deemed as a promising alternative for the removal of heavy metal cations from wastewater.

Ultra-low pressure cellulose-based nanofiltration membrane fabricated on layer-by-layer assembly for efficient sodium chloride removal

Cellulose is a renewable, biodegradable, biocompatible, and sustainable material. A bamboo cellulose-based nanofiltration membrane (LBL-NF-CS/BCM) was prepared with a combination of layer-by-layer assembly and spraying methods. The chemical structure, morphology, and surface charge of the resultant LBL-NF-CS/BCM composite membranes were characterized based on Thermo Gravimetric Analysis (TGA), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and X-ray Photoelectron Spectroscopy Scanning (XPS). The nanofiltration performance of the LBL-NF-CS/BCM composite membranes was evaluated using 500 ppm NaCl solutions under 0.3 MPa pressure. It was found that the LBL-NF-CS/BCM composite membranes had a rejection rate of about 36.11 % against a 500 ppm NaCl solution under the conditions tested, and membrane flux of about 12.08 L/(m² h) was reached. The combined layer-by-layer assembly and spraying provides a scalable and convenient process concept for nanofiltration membrane fabrication.

Recent advances in composites based on cellulose derivatives for biomedical applications

Cellulose derivatives represent a viable alternative to pure cellulose due to their solubility in water and common organic solvents. This, coupled with their low cost, biocompatibility, and biodegradability, makes them an attractive choice for applications related to the biomedicine and bioanalysis area. Cellulose derivatives-based composites with improved properties were researched as films and membranes for osseointegration, hemodialysis and biosensors, smart textile fibers, tissue engineering scaffolds, hydrogels and nanoparticles for drug delivery. The different preparation strategies of these polymeric composites as well as the most recent available experimental results were described in this review. General aspects such as structure and properties of cellulose extracted from plants or bacterial sources, types of cellulose derivatives and their synthesis methods were also discussed. Finally, the future perspectives related to composites based on cellulose derivatives were highlighted and some conclusions regarding the reviewed applications were drawn.

Influence of Polysaccharides' Molecular Structure on the Antibacterial Activity and Cytotoxicity of Green Synthesized Composites Based on Silver Nanoparticles and Carboxymethyl-Cellulose

In this paper we report on the influence of polysaccharides' molecular structure on the antibacterial activity and cytotoxicity of composites based on silver nanoparticles (AgNPs) immobilized into carboxymethyl-cellulose (CMC). These composites were green synthesized from the reduction of silver ions into aqueous solutions of the polysaccharide, using CMC with different degree of substitution (DS) and molecular weight (Mw). The composites were characterized by transmission electron microscopy (TEM), as well as infrared (ATR-FTIR), ultraviolet (UV-Vis), Raman, and X-ray photo-electron (XPS) spectroscopic techniques. The antibacterial activity was evaluated with minimum inhibitory concentration against Enterococcus faecalis. The cytotoxicity of composites was assessed against human gingival fibroblast. Experimental evidence suggests that particle size distribution and morphology of AgNPs change according to the quantity of silver precursor added to the reaction, as well as the DS and Mw of CMC used for composites preparation. This is related to the dispersion of silver precursor into aqueous solutions of the polysaccharide and the formation of Ag-O coordination bonds among AgNPs and COO^- moieties of CMC. Moreover, these coordination bonds modify the ability of nanoparticles to produce and release Ag⁺ into aqueous dispersion, adjusting their antibacterial activity and the induction of cytotoxicity into the tested biological environments.

Carbohydrate-based nanomaterials for biomedical applications

Carbohydrates are abundant biomolecules, with a strong tendency to form supramolecular networks. A host of carbohydrate-based nanomaterials have been exploited for biomedical applications. These structures are based on simple mono- or disaccharides, as well as on complex, polymeric systems. Chemical modifications serve to tune the shapes and properties of these materials. In particular, carbohydrate-based nanoparticles and nanogels were used for drug delivery, imaging, and tissue engineering applications. Due to the reversible nature of the assembly, often based on a combination of hydrogen bonding and hydrophobic interactions, carbohydrate-based materials are valuable substrates for the creations of responsive systems. Herein, we review the current research on carbohydrate-based nanomaterials, with a particular focus on carbohydrate assembly. We will discuss how these systems are formed and how their properties are tuned. Particular emphasis will be placed on the use of carbohydrates for biomedical applications. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.