Preparation of polyacrylic acid-grafted-acryloyl/hemicellulose (PAA-g-AH) hybrid films with high oxygen barrier performance

Heat-sealable, transparent, and degradable arabinogalactan/polyvinyl alcohol films with UV-shielding, antibacterial, and antioxidant properties

Petroleum-based packaging materials are nondegradable and unsustainable and thus are harmful to the environment. Renewable packaging films prepared from bio-based raw materials are promising alternatives to petroleum-based packaging materials. In this study, colorless and transparent bio-based films were successfully cast using a solution containing a mixture of arabinogalactan (AG) and poly (vinyl alcohol) (PVA). Vanillin was incorporated into the mixture to endow the films with UV-shielding, antioxidant, and antibacterial properties. The morphological, physical, antioxidant, and antibacterial properties of the blend films were then characterized. At an AG:PVA weight ratio of 1:3, and the vanillin content was 0.15 %, the tensile strength of the AG/PVA/Vanillin (APV) films reached ~28 MPa, while their elongation at break reached ~475 %. The addition of vanillin significantly affected the antioxidant and antibacterial properties of the blend films, which exhibited superb UV barrier capacity. The APV films exhibited extremely low oxygen transmittance, delaying the onset of mold/rot in strawberries and reducing their weight loss. Because of the heat sealability of the blend films, they can be used for encapsulating various substances, such as concentrated laundry liquid. Moreover, the blend films were recyclable and biodegradable. Thus, these films have great potential for applications that require sustainable packaging.

Waterproof and ultrasensitive paper-based wearable strain/pressure sensor from carbon black/multilayer graphene/carboxymethyl cellulose composite

Huge electronic wastes motivated the flourishing of biodegradable electrically conductive cellulosic paper-based functional materials as flexible wearable devices. However, the relatively low sensitivity and unstable output in combination with poor wet strength under high moisture circumstances impeded the practical application. Herein, a superhydrophobic cellulosic paper with ultrahigh sensitivity was proposed by innovatively employing ionic sodium carboxymethyl cellulose (CMC) as bridge to reinforce the interfacial interaction between carbon black (CB) and multilayer graphene (MG) and SiO₂ nanoparticles as superhydrophobic layer. The resultant paper-based (PB) sensor displayed excellent strain sensing behaviors, wide working range (-1.0 %-1.0 %), ultrahigh sensitivity (gauge factor, GF = 70.2), and satisfied durability (>10,000 cycles). Moreover, the superhydrophobic surface offered well waterproof and self-cleaning properties, even stable running data without encapsulation under extremely high moisture conditions. Impressively, when the fabricated PB sensor was applied for electronic-skin (E-skin), the signal capture of spatial strain of E-skin upon bodily motion was breezily achieved. Thus, our work not only provides a new pathway for reinforcing the interfacial interaction of electrically conductive carbonaceous materials, but also promises a category of unprecedentedly superhydrophobic cellulosic paper-based strain sensors with ultra-sensitivity in human-machine interfaces field.

Preparation and characterization of Konjac glucomannan and pullulan composite films for strawberry preservation

The present study aims to develop the new composite films by blending Konjac glucomannan (KGM) and pullulan with different ratios and concentrations. The structural, physical, barrier properties and morphology of the films were investigated and the practical use on strawberry preservation at 4 ± 1 °C, 85 %±5% relative humidity (RH) and 25 ± 1 °C, 55 %±5% RH was evaluated. Fourier transform infrared and scanning electron microscopy indicated the well-dispersion of film matrix was due to the good compatibility of the components. The mechanical and barrier properties of blend films were markedly enhanced although the light transmittance of which were decreased slightly. It was a further proof that 1% (w/v) KGM/pullulan (with the mass ratio of 2:1) blend film could decrease the weight loss significantly and maintain the titratable acidity, soluble solids and skin color on the strawberry preservation, thus improving the qualities of strawberries during storage time and offering a potential alternative to synthetic materials.

Efficient Extraction and Structural Characterization of Hemicellulose from Sugarcane Bagasse Pith

The aim of this study was to investigate the ultrasound-assisted alkaline extraction process and structural properties of hemicellulose from sugarcane bagasse pith. Response surface model (RSM) was established in order to optimize the extraction conditions for the highest hemicellulose yield based on the single-factor experiments. A maximum total hemicellulose yield of 23.05% was obtained under the optimal conditions of ultrasonic treatment time of 28 min, KOH mass concentration of 3.7%, and extraction temperature of 53 °C, and it evidently increased 3.24% compared without ultrasound-assisted extraction. The obtained hemicellulose was analyzed by Fourier transform infrared (FT-IR) spectroscopy. The monosaccharide composition and average molecular weight of hemicellulose were characterized by using ion chromatography (IC) and gel permeation chromatography (GPC). The results indicated that xylose was dominant component in water-soluble hemicellulose (WH, 69.05%) and alkali-soluble hemicellulose (AH, 85.83%), respectively. Furthermore, the monosaccharides (otherwise xylose) and uronic acids contents of WH were higher than that of AH. Weight average molecular weight of WH was 29923 g/mol, lower than that of AH (74,872 g/mol). These results indicate that ultrasonic-assisted alkaline extraction is an efficient approach for the separation of hemicellulose from sugarcane bagasse pith.

Production of molecular weight fractionated hemicelluloses hydrolyzates from spent coffee grounds combining hydrothermal extraction and a multistep ultrafiltration/diafiltration

Spent coffee grounds are a huge residual stream from instant coffee makers. The production of spent coffee oil and molecular weight fractionated hemicellulose hydrolysates via supercritical CO₂ and a hydrothermal treatment followed by concentration, separation, and purification through cascade ultrafiltration/diafiltration (30-10-5 kDa) was studied. Hemicelluloses extraction yield reached 3.49 g/100 g of dry defatted spent coffee after 40 min at 160 °C. The ultrafiltration system allowed concentrating up to 5-fold certain groups of hemicellulose, being most of them retained in the first membrane. Hemicellulose concentration and molecular weight of the feed exerted a great influence on the mass transfer through the membrane due to the formation of aggregates. However, purification through diafiltration allowed both to decrease by-products retentions from 45.6% to 8.7%, increasing the molecular weight of each fraction. Six hemicellulose products were obtained with purities between 83.7 and 97.8 wt% and weight-average molecular weights between 1641 and 49,733 Da.