Highly efficient polyurethane membrane based on nanocomposite of sulfonated thiacalix[4]arene-sodium alginate for desalination

Recent advances in the polyurethane-based adsorbents for the decontamination of hazardous wastewater pollutants

The pollution of aquatic systems with noxious organic and inorganic contaminants is a challenging problem faced by most countries. Water bodies are contaminated with diverse inorganic and organic pollutants originating from various diffuse and point sources, including industrial sectors, agricultural practices, and domestic wastes. Such hazardous water pollutants tend to accumulate in the environmental media including living organisms, thereby posing significant environmental health risks. Therefore, the remediation of wastewater pollutants is a priority. Adsorption is considered as the most efficient technique for the removal of pollutants in aqueous systems, and the deployment of suitable adsorbents plays a vital role for the sustainable application of the technique. The present review gives an overview of polyurethane foam (PUF) as an adsorbent, the synthesis approaches of polyurethane, and characterization aspects. Further emphasis is on the preparation of the various forms of polyurethane adsorbents, and their potential application in the removal of various challenging water pollutants. The removal mechanisms, including adsorption kinetics, isotherms, thermodynamics, and electrostatic and hydrophobic interactions between polyurethane adsorbents and pollutants are discussed. In addition, regeneration, recycling and disposal of spent polyurethane adsorbents are reported. Finally, key knowledge gaps on synthesis, characterization, industrial applications, life cycle analysis, and potential health risks of polyurethane adsorbents are discussed.

Synthesis of Polyurethane Membranes Derived from Red Seaweed Biomass for Ammonia Filtration

The development of membrane technology is rapidly increasing due to its numerous advantages, including its ease of use, chemical resistant properties, reduced energy consumption, and limited need for chemical additives. Polyurethane membranes (PUM) are a particular type of membrane filter, synthesized using natural organic materials containing hydroxy (-OH) groups, which can be used for water filtration, e.g., ammonia removal. Red seaweed (Rhodophyta) has specific molecules which could be used for PUM. This study aimed to ascertain PUM synthesis from red seaweed biomass (PUM-RSB) by using toluene diisocyanate via the phase inversion method. Red seaweed biomass with a particle size of 777.3 nm was used as starting material containing abundant hydroxy groups visible in the FTIR spectrum. The PUM-RSB produced was elastic, dry, and sturdy. Thermal analysis of the membrane showed that the initial high degradation temperature was 290.71 °C, while the residue from the thermogravimetric analysis (TGA) analysis was 4.88%. The PUM-RSB section indicates the presence of cavities on the inside. The mechanical properties of the PUM-RSB have a stress value of 53.43 MPa and a nominal strain of 2.85%. In order to optimize the PUM-RSB synthesis, a Box–Behnken design of Response Surface Methodology was conducted and showed the value of RSB 0.176 g, TDI 3.000 g, and glycerin 0.200 g, resulting from the theoretical and experimental rejection factor, i.e., 31.3% and 23.9%, respectively.

Sodium alginate blended membrane with polyurethane: Desalination performance and antimicrobial activity evaluation

A series of polymeric membranes were synthesized by blending polyurethane with sodium alginate (0.2, 0.4, 0.6, 0.8 and 1.0%). The structural, morphological and thermal properties of the membranes were examined by FTIR, SEM, AFM and TGA, respectively. Performance evaluation (salt rejection and flux) was assessed through reverse osmosis technique (RO). The FTIR spectra of membranes confirmed extensive hydrogen bonding (3350 cm^-1). The SEM and AFM analyses supported a progressively rising surface roughness of blended membranes. The hydrophilicity, crosslinking density and thermal stability of the membranes were improved with an increase in alginate content. The capability of salt (NaCl and MgCl₂) rejection was improved with alginate up to 0.8%. In addition, the rejection of divalent ions was better than monovalent ions (94 ± 0.96% for NaCl and 98 ± 0.98% for MgCl₂). The blended membranes ascertained an effective chlorine resistivity. The antibacterial activity was also promising, which enhanced with the alginate content in the membrane. The sodium alginate blended membrane with polyurethane proved to be an efficient approach to develop the blended membranes with tunable properties for water desalination.