Lightweight and porous cellulose-based foams with high loadings of zeolitic imidazolate frameworks-8 for adsorption applications

Polyvinyl alcohol/chitosan quaternary ammonium salt composite hydrogel with directional macroporous structure for photothermal synergistic antibacterial and wound healing promotion

After skin tissue trauma, wound infections caused by bacteria posed a great threat to skin repair. However, resistance to antibiotics, the current treatment of choice for bacterial infections, greatly affected the efficiency of anti-infection and wound healing. Therefore, there has been a critical need for the development of novel antimicrobial materials and advanced therapeutic methods to aid in skin repair. In this paper, rGO-PDA@ZIF-8 nanofillers were prepared by coating graphene oxide (GO) with dopamine (DA), followed by in situ growth of zeolite imidazolate framework-8 (ZIF-8). Using polyvinyl alcohol (PVA) and chitosan quaternary ammonium salt (CS) as matrix materials, along with polyethylene glycol (PEG) as a pore-forming agent, and rGO-PDA@ZIF-8 as an antimicrobial nano-filler, we successfully prepared rGO-PDA@ZIF-8/PVA/CS composite hydrogels with a directional macroporous structure using bidirectional freezing method and phase separation technique. This hydrogel exhibited excellent mechanical properties, good solubility and water retention capabilities. In addition, the hydrogel demonstrated excellent biocompatibility. Most notably, it not only exhibited excellent bactericidal effect against E. coli and S. aureus (99.1 % and 99.0 %, respectively) under the synergistic effect of intrinsic antibacterial activity and photothermal antibacterial, but also exhibited the ability to promote wound healing, making it a promising candidate for wound healing applications.

Novel multifunctional environmentally friendly degradable zeolitic imidazolate frameworks@poly (γ-glutamic acid) hydrogel with efficient dye adsorption function

Recently, metal-organic frameworks (MOFs) have been widely developed due to the rich porosity, excellent framework structure and multifunctional nature. Meanwhile, a series of MOFs crystals and MOF-based composites have been emerged. However, the widespread applications of MOFs are hindered by challenges such as rigidity, fragility, solution instability, and processing difficulties. In this study, we addressed these limitations by employing an in-situ green growth approach to prepare a zeolitic imidazolate frameworks-8@poly (γ-glutamic acid) hydrogel (ZIF-8@γ-PGA) with hierarchical structures. This innovative method effectively resolves the inherent issues associated with MOFs. Furthermore, the ZIF-8@γ-PGA hydrogel is utilized for dye adsorption, demonstrating an impressive maximum adsorption capacity of 1130 ± 1 mg/g for methylene blue (MB). The adsorption behavior exhibits an excellent agreement with both the kinetic model and isotherm. Meanwhile, because the adsorbent raw materials are all green non-toxic materials, multiple applications of materials can also be realized. Significantly, the results of antibacterial experiments showed that the ZIF-8@γ-PGA hydrogel after in-situ growth of ZIF-8 had better antibacterial properties. Thus, the ZIF-8@γ-PGA hydrogel has great potential for development in wound dressings, sustained drug owing to its biocompatibility and antibacterial activity.

Trans-scale interface engineering: Constructing nature-inspired spider-web networks for regulating thermal transport and mechanical performance of carbon fiber/phenolic composites

The development of interfacial engineering was crucial for achieving the industrialization of high-performance carbon fiber/phenolic composites. In this study, establishing scalable interpenetrating networks (cellulose nanofiber-zeolitic imidazolate frameworks-8/aramid nanofiber-boron nitride) on the fiber/matrix interphase, was in favor of realizing precise repairation of interfacial defects, further regulating thermal conductivity, mechanical and tribological properties of the composites. Based on the physical and chemical bridging-effects arising from above spider-web networks, the flexural strength and modulus of modified sample were 74.69 MPa and 6.22 GPa, showing an increase of 135.99% and 56.68%, respectively. Meanwhile, this trans-scale spider-web structure acted as a micron skeleton-nano unit continuous thermal conductive network, significantly reduced phonon scattering and displayed a 258.33% enhancement in the thermal management capability of modified sample. This study reveals key design principles of trans-scale interfacial structure to dynamicly regulate performances and meet service requirements of next-generation carbon fiber/phenolic composites.

Self-supported MOF/cellulose-nanocrystals materials designed from ultrafiltration

Metal-organic-frameworks (MOFs) are promising materials for addressing critical issues such as petrochemical separation, water purification, energy storage and drug delivery. Their large-scale deployment, however, is hampered by a limited processability due to their powdery nature. Recently, the hybridization of MOFs with biopolymers has emerged as a greener, biocompatible strategy to shape MOFs composites into more processable membranes, films, and porous materials. In this work, cellulose nanocrystals (CNCs) were used in combination with ZIF-8 (a widely used synthetic zeolite) to produce hybrid composites through ultrafiltration. Results showed that small quantities of CNCs (1 to 20 CNC:ZIF-8 volume ratio) were sufficient to form a self-supported, dense deposit with high ZIF-8 loadings. Compared to classical MOF in situ growth strategies, this approach allowed the tuning of the composition of the final nanocomposite by controlling the nature and quantities of particles in the suspension. The fabrication of the deposit was strongly dependent on the physiochemical properties of the suspension, which were fully characterized with a set of complementary techniques, including in situ SAXS. This technique was employed to investigate the filtration process, which exhibited a homogeneous deposition of ZIF-8 particles mediated by CNC self-assembly. Finally, the available pore volume and integrity of the internal porosity of ZIF-8 were characterized by water porosimetry, demonstrating that the presence of CNCs did not alter the properties of the supported ZIF-8.

Poly(acrylic acid-co-2-acrylamido-2-methyl-1-propanesulfonic acid)-grafted chitosan hydrogels for effective adsorption and photocatalytic degradation of dyes

As a result of the growth of industrialization and urbanization, the water ecosystem is contaminated by various pollutants, including heavy metal ions and dyes. The use of low-cost and environmentally friendly dye adsorbents has been investigated. A hydrogel was fabricated via graft polymerization of acrylic acid (AA) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) onto chitosan. The hydrogel was used as a dye adsorbent and support for a zinc oxide (ZnO) powder photocatalyst. The adsorption capacity of the bare hydrogel was greater towards cationic dyes than anionic dyes. Grafting P(AA-co-AMPS) exhibited a 23-time increase in adsorption capacity towards crystal violet (CV) compared to pristine chitosan. The effect of the AA-AMPS molar ratio on CV adsorption was studied. A hydrogel with an AA-AMPS ratio of 10 : 1 had the highest adsorption capacity towards CV in water, removing 91% of the dye in 12 h. The maximum adsorption capacity was 2023 mg g-1. The adsorption kinetics and isotherm were described by the pseudo-second-order model and the Langmuir model, respectively. ZnO particles were in situ synthesized within the 10 : 1 hydrogel to facilitate the recovery of the photocatalyst. The ZnO hydrogel composite could remove 95% and 92% of CV from solutions on the 1st and 2nd cycle, respectively. In addition, the hydrogel composite containing only 8.7 wt% of ZnO particles effectively degraded adsorbed CV under sunlight and could be reused without requiring a chemical regeneration or photocatalyst recovery procedure. This hydrogel composite is an effective dual-functional material for the adsorption and photodegradation of dye pollutants in wastewater.

Nanopatterned Electroactive Polylactic Acid Nanofibrous MOFilters for Efficient PM0.3 Filtration and Bacterial Inhibition

Biodegradable polylactic acid (PLA) nanofibrous membranes (NFMs) hold great potential to address the increasing airborne particulate matter (PM) and dramatic accumulation of plastic/microplastic pollution. However, the field of PLA NFM-based filters is still in its infancy, frequently dwarfed by the bottlenecks regarding relatively low surface activity, poor electroactivity, and insufficient PM capturing mechanisms. This effort discloses a microwave-assisted approach to minute-level synthesis of dielectric ZIF-8 nanocrystals with high specific surface area (over 1012 m2/g) and ultrasmall size (∼240 nm), which were intimately anchored onto PLA nanofibers (PLA@ZIF-8) by a combined "electrospinning-electrospray" strategy. This endowed the PLA@ZIF-8 NFMs with largely increased electroactivity in terms of elevated dielectric coefficient (an increase of 202%), surface potential (up to 5.8 kV), and triboelectric properties (output voltage of 30.8 V at 10 N, 0.5 Hz). Given the profound control over morphology and electroactivity, the PLA@ZIF-8 NFMs exhibited efficient filtration of PM0.3 (97.1%, 85 L/min) with a decreased air resistance (592.5 Pa), surpassing that of the pure PLA counterpart (88.4%, 650.9 Pa). This was essentially ascribed to realization of multiple filtration mechanisms for PLA@ZIF-8 NFMs, including enhanced physical interception, polar interactions, and electrostatic adsorption, and the unique self-charging function triggered by airflow vibrations. Moreover, perfect antibacterial performance was achieved for PLA@ZIF-8, showing ultrahigh inhibition rates of 99.9 and 100% against E. coli and S. aureus, respectively. The proposed hierarchical structuring strategy, offering the multifunction integration unattainable with conventional methods, may facilitate the development of biodegradable long-term air filters.

In-situ synthesis of floating ZnIn2S4/cellulose foam for facile photocatalysis

The delicate design of photocatalyst monoliths is of great significance for the practical applications of artificial photocatalysis. An in-situ synthesis to prepare ZnIn₂S₄/cellulose foam was developed. Cellulose is dispersed in a highly concentrated ZnCl₂ aqueous solution to prepare Zn²⁺/cellulose foam. Zn²⁺ ions are pre-anchored by hydrogen bonds on cellulose and become in-situ sites for synthesizing ultra-thin ZnIn₂S₄ nanosheets. This synthesis method makes ZnIn₂S₄ nanosheets and cellulose tightly bound and prevents ZnIn₂S₄ nanosheets from stacking in multiple layers. As a proof of concept, the prepared ZnIn₂S₄/cellulose foam exhibits a favorable performance for photocatalytic reduction of Cr(VI) under visible light. By adjusting the concentration of zinc ions, the optimal ZnIn₂S₄/cellulose foam is capable to completely reduce Cr(VI) in 2 h and the photocatalytic activities show no decrease after 4 cycles. This work could inspire people to build floating cellulose-based photocatalysts via in-situ synthesis.

Advances in Application of Cellulose-MOF Composites in Aquatic Environmental Treatment: Remediation and Regeneration

Metal organic frameworks (MOFs) have gained remarkable interest in water treatment due to their fascinating characteristics, such as tunable functionality, large specific surface area, customizable pore size and porosity, and good chemical and thermal stability. However, MOF particles tend to easily agglomerate in nanoscale, thus decreasing their activity and processing convenience. It is necessary to shape MOF nanocrystals into maneuverable structures. The in situ growth or ex situ incorporation of MOFs into inexpensive and abundant cellulose-family materials can be effective strategies for the stabilization of these MOF species, and therefore can make available a range of enhanced properties that expand the industrial application possibilities of cellulose and MOFs. This paper provides a review of studies on recent advances in the application of multi-dimensional MOF-cellulose composites (e.g., aerogels, membranes, and bulk materials) in wastewater remediation (e.g., metals, dyes, drugs, antibiotics, pesticides, and oils) and water regeneration by adsorption, photo- or chemocatalysis, and membrane separation strategies. The advantages brought about by combining MOFs and cellulose are described, and the performance of MOF-cellulose is described and compared to its counterparts. The mechanisms of relative MOF-cellulose materials in processing aquatic pollutants are included. Existing challenges and perspectives for future research are proposed.

Composite beads from chitosan and zeolitic imidazolate framework-8 for the adsorption and photocatalytic degradation of reactive red 141

This study describes the fabrication of composite beads comprising chitosan and zeolitic imidazolate framework-8 (ZIF-8) as a natural biodegradable dye adsorbent and support for ZnO photocatalyst. Chitosan beads were cross-linked with trisodium citrate dihydrate to enhance the adsorption capacity for the reactive red 141 dye (RR141). The ability was further improved by adding ZIF-8. The optimum loading was 2.5%, and the adsorption equilibrium was reached within 2 h. The maximum adsorption capacity of the composite beads was 6.51 mg g^-1 at pH 4 when an initial concentration of 1000 mg L^-1 was used. The pseudo-second-order kinetics model and the Langmuir isotherm model best described the adsorption process. The composite beads could also adsorb dyes like reactive black, Congo red, direct yellow, reactive orange, rhodamine B, crystal violet, and methylene blue (MB). Thermal stability was significantly improved after coating the surface of the 2.5% ZIF beads with a ZnO photocatalyst. After UV irradiation for 5 h, the photocatalytic beads containing 2.59 weight percent of ZnO could decolorize 99% of MB and 90% of RR141 dyes with a degradation rate of 0.6032 h^-1 and 0.3198 h^-1, respectively. Furthermore, the photocatalytic beads remained effective for at least ten consecutive cycles.

Metal-organic frameworks/cellulose hybrids with their modern technological implementation towards water treatment

Metal-organic frameworks (MOFs) are amongst the most attractive porous polymeric networks with appealing properties. However, their inherent fragility, powder nature, low processibility, and handling present some exceptional challenges for high-tech commercial applications. Currently, economic and environmental concerns drive the development of some bioinspired polymeric matrices containing MOFs. As an artifact, the availability of previously unattainable properties is negotiated by conjugating cellulosic materials with crystalline MOFs. Thus, multi-dimensional organic-inorganic hybrid composites are formed with high electrical, optical, mechanical, and thermal features. These MOF/cellulose hybrids, known as CelloMOFs (cellulose MOFs), have remarkable mechanical properties with tunable porosities, specific surface area and accessible active sites, making them ideal for real-world troubleshooting applications such as wastewater treatment, chemical sensing, energy storage, and so on. In this review, current state-of-the-art strategic synthesis routes for fabrication of MOF/cellulose composites with a specific focus on CelloMOFs as a potential tool for mitigation of the targeted emerging water contaminants have been done under the same umbrella, which has previously been less explored. Streamlining discussions on general properties such as raw material selection, structural analysis of cellulose, availability of surface functional groups, cellulose-metal node interactions, cellulose charging, and so on have been emphasized, as has integration with robust MOFs. A better understanding of these fundamental properties is critical because they will have a significant impact on the performance of MOF/cellulose composites in a variety of applications. Furthermore, at the end of this review, the challenges and perspectives of using CelloMOFs have been discussed in a concise manner in order to improve their practical utility rather than just concept mapping.

Green Preparation of Lightweight, High-Strength Cellulose-Based Foam and Evaluation of Its Adsorption Properties

In recent years, the application scope of most cellulose-based foams is limited due to their low adsorbability and poor recyclability. In this study, a green solvent is used to extract and dissolve cellulose, and the structural stability of the solid foam is enhanced by adding a secondary liquid via the capillary foam technology, and the strength of the solid foam is improved. In addition, the effects of the addition of different gelatin concentrations on the micro-morphology, crystal structure, mechanical properties, adsorption, and recyclability of the cellulose-based foam are investigated. The results show that the cellulose-based foam structure becomes compact, the crystallinity is decreased, the disorder is increased, and the mechanical properties are improved, but its circulation capacity is decreased. When the volume fraction of gelatin is 2.4%, the mechanical properties of foam are the best. The stress of the foam is 55.746 kPa at 60% deformation, and the adsorption capacity reaches 57.061 g/g. The results can serve as a reference for the preparation of highly stable cellulose-based solid foams with excellent adsorption properties.

Polyacrylonitrile@TiO2 nanofibrous membrane decorated by MOF for efficient filtration and green degradation of PM2.5

A systematic study was performed on PM2.5 filtration and photodegradation performance of polyacrylonitrile @TiO₂/ zeolitic imidazolate framework-8（PTZ）hybrid membrane. The hybrid membrane was prepared by electrospinning technique and in situ Metal-organic frameworks (MOFs) synthesis. The optimized membrane maintained a good PM2.5 capture efficiency (greater than 99%) and a pressure drop of 34 Pa. The larger specific surface area and higher pore structure enhance the filter interception effect and electrostatic interaction, which can have high applications for the filtering of PM2.5. In addition, zeolitic imidazolate framework-8 (ZIF-8) is uniformly coated on the surface of polyacrylonitrile @ TiO₂ (PT) nanofiber to form N-Ti-O bonds, thus reducing the reorganization of electron-hole pairs and improving the efficiency of photodegradation. Compared with PT, the hybrid structure formed by PTZ has a higher degradation efficiency for PM2.5 (increased from 66% to 85%). The produced PTZ membrane exhibits a promising future in the collection and green degradation of PM2.5.

Collaboration of two-star nanomaterials: The applications of nanocellulose-based metal organic frameworks composites

Nanocellulose, as the star nanomaterial in carbohydrate polymers, has excellent mechanical properties, biodegradability, and easy chemical modification. However, further practical applications of nanocellulose are limited by their inadequate functionalization. Metal-organic frameworks (MOFs), as the star nanomaterial in functional polymers, have a large surface area, high porosity, and adjustable structure. The collaboration of nanocellulose and MOFs is a desirable strategy to make composites especially interesting for multifunctional and multi-field applications. What sparks will be produced by the collaboration of two-star nanomaterials? In this review article, we highlight an up-to-date overview of nanocellulose-based MOFs composites. The sewage treatment, gas separation, energy storage, and biomedical applications are mainly summarized. Finally, the challenges and research trends of nanocellulose-based MOFs composites are prospected. We hope this review may provide a valuable reference for the development and applications of carbohydrate polymer composites soon.

Microwave-assisted MOF@biomass layered nanomaterials: Characterization and applications in wastewater treatment

MOF@Biomass layered hybrids were designed through in situ growth from rice husk (RH) and microwave-assisted synthesized MIL-53(Al) particles that enable the reduction of reaction times. The synthesis process included steps to pretreat RH, Al adsorption on RH, and then MIL-53(Al) in-situ growth reaction at 125 °C for 60 min and 200 W irradiation power. The resulting hybrid (MIL-53(Al)@RH) and its parent separate materials were characterized using TGA, SEM, FTIR, XRD, among others. MIL-53(Al)@RH showed high crystallinity in the hybridized MOF particles, thermal decomposition phases, and functional groups (Al-O, O-H, CO, and CC). The hybrid particles allow an easy separation during heterogeneous processing due to their 400 times larger size compared to MIL-53(Al) crystals. The properties of the layered hybrids for removal of Oxytetracycline (OTC), Diclofenac (DCL), and Glyphosate (GLY) in aqueous solutions, were tested by adsorption (ADS) and advanced oxidation processes (AOP). The high ADS capacities (162 mg g^-1 GLY, 139 mg g^-1 OTC, 93 mg g^-1 DCL) and % removal in AOP (97% GLY, 91% OTC, 80% DCL) demonstrated that MIL-53(Al) maintained its properties after hybridization.

Bimetallic MOFs loaded cellulose as an environment friendly bioadsorbent for highly efficient tetracycline removal

Due to the increasingly serious antibiotic-related pollution, it is crucial to develop novel green bioadsorbents to effectively remove antibiotics from aqueous solutions. In this study, Fe doped zeolitic imidazolate frameworks-8 loaded cellulose (Fe/ZIF-8@cellulose) aerogels were prepared. The synthesized Fe/ZIF-8@cellulose aerogels were characterized experimentally including morphology observation and chemical compositions determination. The effects of bioadsorbent dosage, solution pH, adsorption time, initial TC concentration and adsorption temperature on the TC adsorption behaviors were systematically studied. Due to the introduction of Fe in the ZIF-8, the maximum adsorption capacity of Fe/ZIF-8@cellulose for TC could reach as high as 1359.2 mg/g, which is higher than the reported ZIF-8 loaded polysaccharide based adsorbents. The adsorption kinetics and isotherm of TC adsorption were also determined. With the cellulose as the matrix to load Fe/ZIF-8, the obtained Fe/ZIF-8@cellulose aerogels exhibited good reusability. Most importantly, the TC adsorption mechanism was proposed. The results of our finding suggest that the Fe doping into MOFs is an effective strategy to improve the antibiotics adsorption performance and the application of cellulose as the matrix is a valuable method to increase the cyclic utilization. This study highlights the potentials of applying the Fe/ZIF-8@cellulose aerogels in the antibiotics removal for practical wastewater.

MOF@biomass hybrids: Trends on advanced functional materials for adsorption

This contribution aims to demonstrate the scope of new hybrids between biomass and metal-organic frameworks (MOF@biomass) used in the adsorption process of pollutants. After a brief presentation of the use of the main series of MOFs as efficient adsorbents for different types of pollutants, the limitations of these structures related to particle size and hydrodynamic problems during their application are highlighted. Lignocellulosic biomasses are also recognized as an alternative adsorbent, mainly due to their high natural abundance and their low environmental impact during and after their application. The limited capacity of bioadsorbents becomes important in this research. Consequently, the largest amount of information existing in the last ten years on MOF-Biomass functionalization as a hybrid and improvement technology for adsorption processes is compiled, analyzed, compared and contrasted. So far, there is no evidence of works that exploit the concept of functionalization of adsorbents of different nature to give rise to new hybrid materials. Through this review it was found that the hybrids obtained show a higher adsorption capacity (Qe) compared to their precursors, due to the increase of organic functional groups provided by the biomass. Thus, for heavy metals, dyes, Arsenium anions and other organic and pharmaceutical compounds, there are increases in Qe of about 100 mg g^-1. The possibility of the new hybrid being studied for desorption and reuse processes is also raised, resulting in a new line of research that is attractive for the industry from an economic and environmental point of view. The functionalization methods and techniques used in the studies cited in this article are outlined. In conclusion, this research brings a new horizon of study in the field of adsorption and mentions the main future challenges related to new sustainable applications.

Valuable aramid/cellulose nanofibers derived from recycled resources for reinforcing carbon fiber/phenolic composites

The scale-up preparation of aramid nanofiber (ANF) and cellulose nanofiber (CNF), still faces serious challenges such as extreme production cost and lengthy preparation cycle. Herein, a feasible top-down strategy was proposed to achieve the efficient reclamation of waste resources, further realizing the large-scale production of high value-added nanofibers. The ANF/CNF as nanoscale building blocks and their reinforcement effects on the mechanical performances of carbon fiber/phenolic composites were investigated. Related strength and modulus of ANF/CNF-enhanced composites in the tensile, bending, shear and nano indentation tests, increased by 118.1% (tensile strength), 141.2% (tensile modulus), 142.2% (flexural strength), 354.4% (flexural modulus), 38.8% (shear strength) and 94.4% (elastic modulus), respectively. Our work offers a valuable reference in the fabrication of low-cost ANF/CNF derived from waste resources, which would facilitate the wide application of nanofibers in fabricating high-performance advanced functional materials.

Assembly of AIEgen-Based Fluorescent Metal-Organic Framework Nanosheets and Seaweed Cellulose Nanofibrils for Humidity Sensing and UV-Shielding

Integrating synthetic low-dimensional nanomaterials such as metal-organic framework (MOF) nanosheets with a sustainable biopolymer is a promising strategy to endow composites with attractive structural and functional properties for expanded applications. Herein, aggregation-induced-emission luminogen (AIEgen)-based MOF bulk crystals are successfully exfoliated into ultrathin 2D nanosheets. Seaweed cellulose nanofibrils (CNFs) are assembled with low amounts (0.3 to 4.0 wt%) of the 2D nanosheets to generate luminescent composites. The 2D nanosheets are adsorbed onto the CNFs in dilute water suspensions owing to the flexibility of the MOF nanosheets and the high aspect ratio of the CNFs. Transparent films are prepared by solution casting from a water suspension of the CNF-MOF assembly. The fluorescence emission of the composite films is enhanced because of the favored affinity between MOF nanosheets and CNFs. Remarkably, these films demonstrate excellent UV-shielding capacity and high optical transmittance at the visible wavelength range. The composite films also show reversible changes in fluorescence emission intensity in response to ambient humidity. The tensile strength and modulus of the composite films are also enhanced owing to the increased adhesion between CNFs through the adsorbed MOF nanosheets. This work provides a novel pathway to fabricate luminescent CNFs-based composites with tunable optical properties for functional materials.

Advanced MOFs@aerogel composites: Construction and application towards environmental remediation

Environmental pollution has drawn forth advanced materials and progressive techniques concentrating on sustainable development. Metal-organic frameworks (MOFs) have aroused vast interest resulting from their excellent property in structure and function. Conversely, powdery MOFs in highly crystalline follow with fragility, poor processability and recoverability. Aerogels distinguished by the unique three-dimensional (3D) interconnected pore structures with high porosity and accessible surface area are promising carriers for MOFs. Given these, combining MOFs with aerogels at molecule level to obtain advanced composites is excepted to further enhance their performance with higher practicability. Herein, we focus on the latest studies on the MOFs@aerogel composites. The construction of MOFs@aerogel with different synthetic routes and drying methods are discussed. To explore the connection between structure and performance, pore structure engineering and quantitation of MOFs content are outlined. Furthermore, various types of MOFs@aerogel composites and their carbonized derivatives are reviewed, as well as the applications of MOFs@aerogel for environmental remediation referring to water purification and air clearing. More importantly, outlooks towards these emerging advanced composites have been presented from the perspective of practical application and future development.

Facile preparation of nanocellulose/Zn-MOF-based catalytic filter for water purification by oxidation process

Sulfate radical (SO₄^•-)-based advanced oxidation processes (SR-AOPs) have recently attracted much attention due to their potential in degrading organic pollutants. Metal-organic frameworks (MOFs) have been reported as effective materials to generate SO₄^•-. However, it is challenging to separate and recover the dispersed MOF particles from the reaction solution when MOFs are used alone. We used cellulose nanofibers (CNFs) as a porous filter template to immobilize Zn-based MOF, zeolitic imidazolate framework-8 (ZIF-8), and obtained a catalytic composite membrane having peroxymonosulfate (PMS) activating function to produce SO₄^•-. The CNF was effective in holding ZIF-8 nanoparticle and making a durable porous filter. The activated PMS-produced ^•OH and SO₄^•- radicals from ZIF-8 play an important role in the catalytic reaction. More than 90% of methylene blue and rhodamine B was degraded by ZIF-8/CNFs composite membrane in the PMS environment within 60 min. The ZIF-8/CNFs catalytic filters can be used several times without performance reduction for organic dye degradation. The results show that ZIF-8/CNFs catalytic membrane can be separated from organic pollution system quickly and used for the efficient separation and recovery of MOF particle-based catalytic materials. Therefore, this study provides a new perspective for fabricating the MOFs particles-immobilized catalytic filter by biomass nanocellulose-based materials for water purification. This method can be used for facile fabrication of the cellulose-based porous functional filter and open diverse applications.

Efficient and ecofriendly cellulose-supported MIL-100(Fe) for wastewater treatment

Due to their efficiency and accessibility, benzodiazepines are widely manufactured and consumed and as a result, they can be found in almost all wastewaters. Among the materials that were used for the removal of drug contaminants from wastewater, metal–organic frameworks (MOFs) demonstrated unique properties. In this regard, a composite of carboxymethylated cellulose (CMC) and MIL-100(Fe) was prepared via a sonochemical method and used for the removal of lorazepam from wastewater in various conditions. A maximum capacity of 811 mg g⁻¹ was achieved which is considered a great improvement compared to bare MIL-100(Fe) (150 mg g⁻¹) and other previously reported adsorbents. It is noteworthy that the efficiency of the adsorbent did not reduce in the second and third cycle of adsorption/desorption. Moreover, the effect of pH, dose of adsorbent, isotherms and the kinetics of this process were studied using UV-vis and HPLC analyses and the adsorbents were fully characterized with PXRD, TGA, BET, SEM, ZP and FT-IR techniques. Our findings demonstrate that this composite is clearly a green, recyclable and efficient adsorbent for the removal of lorazepam and opens our way to further potential applications in the removal of other active pharmaceutical ingredients.

In this manuscript, the successful utilization of an improved cellulose-supported MOF, MIL-100(Fe)@CMC, for the adsorption of lorazepam is reported.

Zeolitic imidazolate framework-8/Bacterial Cellulose Composite for Iodine Loading and Its Antibacterial Performance

Bacterial cellulose (BC), produced by bacteria and fungi, is a promising material in the biomedical field. However, non-antibacterial activity limits its broad applications. Herein, antibacterial composites (BC/ZIF-8-Iodine) were prepared by...

Dye contaminated wastewater treatment through metal–organic framework (MOF) based materials

A complete discussion of MOFs and MOF composites such as MOF-based membranes, magnetic MOFs, and metal–organic gels (MOGs) used for dye removal along with their adsorption efficiency has been done.

ZIF-8/PI Nanofibrous Membranes With High-Temperature Resistance for Highly Efficient PM0.3 Air Filtration and Oil-Water Separation

Air and water pollution poses a serious threat to public health and the ecological environment worldwide. Particulate matter (PM) is the major air pollutant, and its primary sources are processes that require high temperatures, such as fossil fuel combustion and vehicle exhaust. PM_0.3 can penetrate and seriously harm the bronchi of the lungs, but it is difficult to remove PM_0.3 due to its small size. Therefore, PM_0.3 air filters that are highly efficient and resistant to high temperatures must be developed. Polyimide (PI) is an excellent polymer with a high temperature resistance and a good mechanical property. Air filters made from PI nanofibers have a high PM removal efficiency and a low air flow resistance. Herein, zeolitic imidazolate framework-8 (ZIF-8) was used to modify PI nanofibers to fabricate air filters with a high specific surface area and filtration efficiency. Compared with traditional PI membranes, the ZIF-8/PI multifunction nanofiber membranes achieved super-high filtration efficiency for ultrafine particles (PM_0.3, 100%), and the pressure drop was only 63 Pa. The filtration mechanism of performance improvement caused by the introduction of ZIF-8/PI nanofiber membrane is explored. Moreover, the ZIF-8/PI nanofiber membranes exhibited excellent thermal stability (300 C) and efficient water–oil separation ability (99.85%).

Metal-organic frameworks/polydopamine synergistic interface enhancement of carbon fiber/phenolic composites for promoting mechanical and tribological performances

Carbon fiber/phenolic composites have wide application prospects in the transmission of vehicles, where the combination of prominent mechanical and tribological properties is required. Multiscale metal-organic frameworks (MOFs) and polydopamine (PDA) as binary reinforcements were employed to construct a rigid-flexible hierarchical structure for improving the interfacial performances of friction materials. This unique rigid-flexible (MOFs/PDA) reinforcement could act as an effective interfacial linker, significantly facilitating the integration of fibers into the matrix and establishing a strong mechanical interlocking and chemical bonding onto the fiber/matrix interphase, thus boosting the mechanical and tribological properties of the composites. Benefiting from the MOF/PDA synergistic enhancement effects, the interlaminar shear strength of ZIF-8-composites (P1), MOF-5-composites (P2) and UiO-66-(COOH)₂-composites (P3) was improved by 70.80%, 43.80% and 53.28%, respectively. In addition, the wear rate of P1 decreased from 3.55 × 10^-8 cm³ J^-1 to 2.45 × 10^-8 cm³ J^-1. This work provides a feasible approach for establishing rigid-flexible reinforced structures and opens up a double-component synergistic enhancement strategy to efficiently promote mechanical and tribological properties for fabricating high-performance carbon fiber/phenolic composites.

High-Efficiency Air Filter Media with a Three-Dimensional Network Composed of Core-Shell Zeolitic Imidazolate Framework-8@Tunicate Nanocellulose for PM0.3 Removal

Particulate matter (PM) in air has seriously endangered human health. Especially, PM0.3 can easily enter the lungs and blood through breathing. Herein, an air filter with a three-dimensional (3D) network consisting of core-shell structured fibers was designed by in situ growth of zeolitic imidazolate framework-8 on tunicate nanocellulose/glass fiber composite filter media (ZIF-8@TNC/GF). The filtration performance of the obtained ZIF-8@TNC/GF membranes against sodium chloride particles with the MPPS (most penetrating particle size) was investigated. The air filter media at the optimal ratio of ZIF-8 exhibited an ultrahigh efficiency of 99.998% and a quality factor of 0.0308 Pa^-1 for PM0.3. Further characterizations showed that the ZIF-8@TNC/GF air filter had a hierarchical and rich pore structure, showing a large specific surface area (50.3 m² g^-1). More significantly, compared with the TNC/GF prepared by the dipping method, TNCs changed from the original two-dimensional (2D) nonuniform network to a uniform 3D network after the ZIF-8 was introduced. Moreover, the ZIF-8@TNC fibers with a core-shell structure inhibited the aggregation of nanocellulose. This study will shed light on the fabrication of high-efficiency TNC composite air filter media with fluffy 3D networks.

Cellulose-Based Materials for Water Remediation: Adsorption, Catalysis, and Antifouling

Cellulose-based materials have been advanced technologies that used in water remediation. They exhibit several advantages being the most abundant biopolymer in nature, high biocompatibility, and contain several functional groups. Cellulose can be prepared in several derivatives including nanomaterials such as cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidized cellulose nanofibrils (TOCNF). The presence of functional groups such as carboxylic and hydroxyls groups can be modified or grafted with organic moieties offering extra functional groups customizing for specific applications. These functional groups ensure the capability of cellulose biopolymers to be modified with nanoparticles such as metal-organic frameworks (MOFs), graphene oxide (GO), silver (Ag) nanoparticles, and zinc oxide (ZnO) nanoparticles. Thus, they can be applied for water remediation via removing water pollutants including heavy metal ions, organic dyes, drugs, and microbial species. Cellulose-based materials can be also used for removing microorganisms being active as membranes or antibacterial agents. They can proceed into various forms such as membranes, sheets, papers, foams, aerogels, and filters. This review summarized the applications of cellulose-based materials for water remediation via methods such as adsorption, catalysis, and antifouling. The high performance of cellulose-based materials as well as their simple processing methods ensure the high potential for water remediation.

Cellulose-Based Hybrid Aerogels: Strategies toward Design and Functionality

The brittle nature of early aerogels developed from inorganic precursors fueled the discovery of their organic counterparts. Prominent among these organics are cellulose aerogels because of their natural abundance, biocompatibility, sustainable precursors, and tunable properties. The hierarchical structure of cellulose, from polymers to nano/microfibers, further facilitates fabrication of materials across multiple length scales with added applicability. However, the inherent flammability, structural fragility, and low thermal stability have limited their use. Recently developed cellulose-based hybrid aerogels offer strong potential owing to their tunability and enhanced functionality brought about by combining the inherent properties of cellulose with organic and inorganic components. A survey of the historical background and scientific achievements in the design and development of cellulose-based hybrid aerogel materials is encompassed here. The impacts of incorporating organic and inorganic ingredients with cellulose and the corresponding synergistic effects are discussed in terms of their design and functionality. The underlying principles governing the structural integration and functionality enhancement are also analyzed. The latest developments of cellulose-based hybrid aerogels fabricated from nontraditional incipient aerogels, such as fibrous webs, are also explored. Finally, future opportunities that could make these materials achieve even greater impacts through improved scalability, rationally designed synthesis, and multifunctional properties are discussed.

Hybrid Metal-Organic Framework-Cellulose Materials Retaining High Porosity: ZIF-8@Cellulose Nanofibrils

Metal-organic frameworks have attracted a great deal of attention for future applications in numerous areas, including gas adsorption. However, in order for them to reach their full potential a substrate to provide an anchor may be needed. Ideally, this substrate should be environmentally friendly and renewable. Cellulose nanofibrils show potential in this area. Here we present a hybrid material created from the self-assembly of zeolitic imidazolate framework (ZIF-8) nanocrystals on cellulose nanofibrils (CNF) in aqueous medium. The CNF/ZIF-8 was freeze dried and formed free standing materials suitable for gas adsorption. A BET area of 1014 m2 g−1 was achieved for the CNF/ZIF-8 hybrid materials ZIF-8@cellulose which is comparable with reported values for free standing ZIF-8 materials, 1600 m2 g−1, considering the dilution with cellulose, and a considerable enhancement compared to CNF on its own, 32 m2 g−1.

Ultralight and shapeable nanocellulose/metal-organic framework aerogel with hierarchical cellular architecture for highly efficient adsorption of Cu(II) ions

Water contamination by heavy metal pollutants is a global concern due to detrimental effects on the environment and human health. Regenerable, high-performance heavy metal sorbents are urgently demanded for improved water purification. Herein, we present an elegant strategy of interweaving metal-organic framework (MOF-808-ethylene diamine tetraacetic acid) and TEMPO-oxidized cellulose nanofibers (TCNF) to construct freeways in hybrid aerogels for rapid and efficient transport and capture of heavy metal ions. In this strategy, a postsynthetic ligand exchange approach is applied to introduce ordered and high-density accessible binding sites for metal ions. The prepared aerogels show excellent shapeability, ultralow density less than 0.005 g cm^-3, and high hierarchical porosity of 99.82%. Furthermore, benefiting from the abundant chelating groups and accessible surface areas, these aerogels exhibit outstanding uptake capacity of 300 mg g^-1 and rapid adsorption kinetics of 0.031 mg g^-1 h^-1 for Cu(II) ions, significantly better than conventional TCNF aerogels. The aerogels could be easily regenerated at least five cycles without greatly performance loss. These aerogels could effectively remove diverse heavy metal ions from complicated contaminated water. Thus, this work provides a novel method to synthesize environmental-friendly, regenerable, and high-performance adsorption materials for water remediation.

Two methods for constructing ZIF-8 nanomaterials with good bio compatibility and robust antibacterial applied to biomedical

Metal-organic framework materials not only possess porous structures, but also have excellent antibacterial properties. It is of great practical significance to prepare new antibacterial materials with excellent antibacterial effect by metal-organic framework materials. In our study, Zeolitic Imidazolate Framework-8 (ZIF-8) nanomaterials with antibacterial properties were prepared via the solvent method and diethanolamine template method. The materials were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), cold field-emission scanning electron microscope (SEM), transmission electron microscopy (TEM), N₂ adsorption-desorption experiment, antibacterial experiment, and biocompatibility experiment. Results showed that ZIF-8 prepared by solvent method has a more typical hexagonal structure, larger specific surface area, and smaller pore size, and the values are 1812.07 m²g^-1 and 2.2412 nm, respectively. At the same time, the materials prepared by the two methods have excellent antibacterial properties, and exhibit good biocompatibility at low concentrations, the antibacterial activity against Escherichia coli and Staphylococcus aureus are higher than 95%, and the cell viabilities of the selected five material concentrations of 12.5 µg mL^-1, 25 µg mL^-1, 50 µg mL^-1, 100 µg mL^-1 and 200 µg mL^-1 are more than 70%. Therefore, this study provides a feasible method for preparing Nano-scale antibacterial functional particles, and it is of great significance to broaden the application field of ZIF-8 materials and prepare ZIF-8 drug-delivery functional materials.

Wood-inspired nanocellulose aerogel adsorbents with excellent selective pollutants capture, superfast adsorption, and easy regeneration

Heavy metal ions can cause a series of hazards to environment and humans. Herein, we developed a wood-inspired nanocellulose aerogel adsorbent with excellent selective capability, superfast adsorption, and easy regeneration. The premise for the design is that the biomimetic honeycomb architecture and specific covalent bonding networks can provide the adsorbent with structural and mechanical integrity yet superfast removal of target contaminants. The as-obtained adsorbent showed the maximum adsorption capacity for Pb(II), Cu(II), Zn(II), Cd(II), and Mn(II) of 571 mg g^-1, 462 mg g^-1, 361 mg g^-1, 263 mg g^-1, and 208 mg g^-1, respectively. The adsorbent could remove Pb(II) species with super-rapid speed (87% and 100% of its equilibrium uptake in 2 min and 10 min, respectively). Furthermore, the adsorption isotherm and kinetics models were in accord with the Langmuir and pseudo-second-order models, indicating that the adsorption behavior was dominated by monolayer chemisorption. The aerogel adsorbent had better affinity for Pb(II) than other coexisting ions in wastewater and could be regenerated for at least five cycles. Such a wood-inspired aerogel adsorbent holds great potential in the application of contaminant cleaning.

In situ growth of amino-functionalized ZIF-8 on bacterial cellulose foams for enhanced CO2 adsorption

Zeolitic imidazolate frameworks (ZIFs) hold great potential for carbon capture, while a major challenge for the practical application of ZIFs is the development of convenient three-dimensional bulk materials. Here, sustainable and biodegradable bacterial cellulose (BC) was used as the substrate for ZIF growth. Amino-functionalized ZIF-8 (ZIF-8-NH₂) was prepared within BC substrate via an in situ growth approach. ZIF crystals were wrapped uniformly over cellulose fibers and the chelating effect between metal (zinc) ions and hydroxyl groups makes the composites have high interface affinity and compatibility. The resulting foams presented a high CO₂ adsorption capacity of 1.63 mmol/g (25 °C, 1 bar). Moreover, ZIF-8-NH₂@BC foams are facile to be regenerated by heating at 80 °C. This work provides a new avenue to construct ZIF/cellulose composites for gas treatment applications.

Bioinspired Cellulose Foam with Excellent Water Wicking and Flux Properties Prepared Using Ice Template

The application and functionalization of cellulose has been attracting increased attention in academic and industrial studies because of its wide range of sources, short renewable cycle, and low environmental impact. In order to enhance the application field of cellulose and decrease the environmental pollution for organic solvent associated with its preparation, cellulose foam with a vertically hierarchically porous structure similar to wood was designed and fabricated successfully from a cellulose aqueous solution using an ice templated in this study. The cellulose foam prepared using a 3 wt % concentration possessed a uniform vertical hierarchically porous structure, which could provide a pathway for the flow of water or air based on the capillary effect. The highest water wicking rate and flux were 7.8184 mm·s^-1 and 29.49 mL·min^-1·g^-1, respectively, for the porous foam prepared using a 3 wt % concentration. The mechanical testing experiment showed that the porous structure did not reduce the amount of stress that the sample could endure before being damaged. The compression strength increased with increasing cellulose concentration in solution. Therefore, the hierarchical structure formed in the prepared cellulose foam effectively improved the water flux behavior and provided a structural basis for future applications of cellulose scaffolds.

MOF based engineered materials in water remediation: Recent trends

The significant upsurge in the demand for freshwater has prompted various developments towards water sustainability. In this context, several materials have gained remarkable interest for the removal of emerging contaminants from various freshwater sources. Among the currently investigated materials for water treatment, metal organic frameworks (MOFs), a developing class of porous materials, have provided excellent platforms for the separation of several pollutants from water. The structural modularity and the striking chemical/physical properties of MOFs have provided more room for target-specific environmental applications. However, MOFs limit their practical applications in water treatment due to poor processability issues of the intrinsically fragile and powdered crystalline forms. Nevertheless, growing efforts are recognized to impart macroscopic shapability to render easy handling shapes for real-time industrial applications. Furthermore, efforts have been devoted to improve the stabilities of MOFs that are subjected to fragile collapse in aqueous environments expanding their use in water treatment. Advances made in MOF based material design have headed towards the use of MOF based aerogels/hydrogels, MOF derived carbons (MDCs), hydrophobic MOFs and magnetic framework composites (MFCs) to remediate water from contaminants and for the separation of oils from water. This review is intended to highlight some of the recent trends followed in MOF based material engineering towards effective water regeneration.

One-pot fabrication of antibacterial β-cyclodextrin-based nanoparticles and their superfast, broad-spectrum adsorption towards pollutants

The current water treatment technology is still based on low energy efficient processes due to the complex composition of wastewater. To achieve high energy efficiency, many micro-porous materials with complex functional groups have been fabricated because of their high pollutant adsorption capabilities. In this work, antibacterial β-cyclodextrin-based nanoparticles (E-β-CDN) were prepared via one-pot method to explore their adsorption performance to pollutants in wastewater. The resulting nanoparticles exhibited superfast adsorption kinetics to pollutants with removal efficiency of over 95% within 10 s. The nanoparticles also presented broad-spectrum adsorption to organic pollutants and heavy metal ions, and their maximum adsorption capacity was 3289.6 mg g^-1 towards methyl orange (MO) and 970.8 mg g^-1 towards Pb(II), much higher than that of many other adsorbents. Easy cyclic adsorption-desorption was another distinguishing feature of the nanoparticles, whose removal efficiency to these pollutants hardly varied after 10 cycles of regeneration. Interestingly, the resulting nanoparticles showed prominent antibacterial activity of 99.99% bacterial inhibitive rate against both gram-negative bacteria Escherichia coli (E. coli) and gram-positive bacteria Staphylococcus aureus (S. aureus). These results suggest that the resulting nanoparticles have great potential in the purification of the wastewater.