Carbohydrates-rich corncobs supported metal-organic frameworks as versatile biosorbents for dye removal and microbial inactivation

In situ growth of HKUST-1 on electrospun polyacrylonitrile nanofibers/regenerated cellulose aerogel for efficient methylene blue adsorption

Dyes, as organic pollutants, are causing increasingly severe environmental problems. Metal-organic frameworks (MOFs) are considered promising dye adsorbents; however, their application is limited due to their powder or solid particle forms and limited reusability. Therefore, this study proposes an innovative approach to develop a novel MOF-based composite aerogel, specifically a HKUST-1/polyacrylonitrile nanofibers/regenerated cellulose (HKUST-1/PANNs/RC) composite aerogel adsorbent, for the adsorption of pollutants in water. This adsorbent was successfully prepared using a simple method combining covalent crosslinking, quick freezing, freeze-drying, in-situ growth synthesis, and solvothermal techniques. The HKUST-1/PANNs/RC composite aerogel exhibits a significantly large specific surface area, which is approximately 64 times greater than that of PANNs/RC (10.45 m2·g-1), with a specific surface area of 669.9 m2·g-1. The PANNs serve as a support framework, imparting excellent mechanical properties to the composite aerogel, enhancing its overall stability and recoverability. Additionally, the composite aerogel contains numerous -COOH and -OH groups on its surface, providing strong acid resistance and facilitating interactions with pollutant molecules through electrostatic interactions, π-π conjugation, n-π* interactions, and hydrogen bonding, thereby promoting the adsorption process. Using methylene blue (MB) as a probe molecule, the study results demonstrate that the HKUST-1/PANNs/RC composite aerogel has an adsorption capacity of 522.01 mg·g-1 for MB (25 h), exhibiting excellent adsorption performance. This composite aerogel shows great potential for application in water pollution control.

Synergistic Effect of UiO-66 Directly Grown on Kombucha-Derived Bacterial Cellulose for Dye Removal

Metal-Organic Frameworks (MOFs) are particularly attractive sorbents with great potential for the removal of toxic dye pollutants from industrial wastewaters. The uniform dispersion of MOF particles on suitable substrates then represents a key condition to improve their processability and provide good accessibility to the active sites. In this work, we investigate the efficiency of a natural bacterial cellulose material derived from Kombucha (KBC) as an active functional support for growing and anchoring MOF particles with UiO-66 structures. An original hierarchical microstructure was obtained for the as-developed Kombucha cellulose/UiO-66 (KBC-UiO) composite material, with small MOF crystals (~100 nm) covering the cellulose fibers. Promising adsorption properties were demonstrated for anionic organic dyes such as fluorescein or bromophenol blue in water at pH 5 and pH 7 (more than 90% and 50% removal efficiency, respectively, after 10 min in static conditions). This performance was attributed to both the high accessibility and uniform dispersion of the MOF nanocrystals on the KBC fibers together with the synergistic effects involving the attractive adsorbing properties of UiO-66 and the surface chemistry of KBC. The results of this study provide a simple and generic approach for the design of bio-sourced adsorbents and filters for pollutants abatement and wastewater treatment.

Calcined Chitosan/Cellulous Aerogel Modified with Copper Oxide Nanoparticles as an Efficient Sorbent for the Optimized Removal of Formic Acid from Water

A porous aerogel sorbent was prepared by the carbonization of a biohydrogel consisting of cellulose and chitosan (CS/CE) biopolymers. The adsorbent was also modified with copper oxide nanoparticles to effectively remove formic acid from water in batch mode. Characterization techniques, including scanning electron microscopy, Fourier transform infrared, Brunauer-Emmett-Teller, and X-ray diffraction, were employed to study the prepared sorbents. The concentration of formic acid in the solution was exactly determined by using liquid chromatography. To achieve maximum removal efficiency, important process variables were optimized using a central composite design data-based algorithm. Under optimal conditions, i.e., the initial concentration of 167.98 mg/L, the amount of sorbent equal to 75.28 mg, the contact time of 10.41 min, and the sample volume of 22.56 mL, a maximum acid removal efficiency of 84% was obtained. The Langmuir isotherm model was appropriately fitted to the experimental data, which indicates the chemical interaction of the sorbent active sites with formic acid. An adsorption capacity of 116.28 mg/g was also attained. The adsorption followed a pseudo-second-order kinetic pattern. According to the thermodynamic criteria, the adsorption of formic acid on the copper oxide-modified aerogel was exothermic, entropy-reducing, and favorable at temperatures lower than 290 K. Based on the results, CS/CE hydrogels comprising CuO nanoparticles are promising precursors for synthesizing carbonized aerogel sorbents that are successful in removing formic acid from aqueous environments.

Template-Free Synthesis and Multifunctional Application of Foam HKUST-1

Hierarchically porous metal-organic frameworks (HP-MOFs) have attracted a lot of attention in recent years because their hierarchical pores have critical importance in strengthening their performance, including guest diffusion kinetics, catalytic activity, and selectivity, especially with reference to large molecules. However, the preparation method for simple, controllable, and stable HP-MOFs at a micro-/meso-/macroscopic scale is still lacking. Herein, we showed several forms of HKUST-1 (HKUST = Hong Kong University of Science and Technology) by simply changing the copper source and solvent type, including original micron HKUST-1 (O-HKUST-1), half-foam HKUST-1 (HF-HKUST-1), and fully foam HKUST-1 (F-HKUST-1). Compared to O-HKUST-1, HF-HKUST-1 and F-HKUST-1 possessed an apparent hierarchically porous structure due to the high fusion of HKUST-1 nanocrystals. Especially in F-HKUST-1, all of the HKUST-1 nanocrystals were tightly integrated into each other, which formed a holistic hollow foam structure. Hence, F-HKUST-1 exhibited the highest adsorption capacity toward large molecules, including proteases, phosphotungstic acid, and organic dyes. Meanwhile, F-HKUST-1 presented the highest photocatalytic degradation capability for rhodamine B. Furthermore, F-HKUST-1, loaded with phosphotungstic acid (F-HKUST-1@PTA), which was used as a catalyst, indicated a catalytic capacity comparable to that of a homogeneous catalyst (pure phosphotungstic acid).

Nanostructured copper-organic frameworks for the generation of sulphate radicals: application in wastewater disinfection

In recent years, the presence of pathogens in the environment has become an issue of widespread concern in society. Thus, new research lines have been developed regarding the removal of pathogens and persistent pollutants in water. In this research, the efficacy of nanostructure copper-organic framework, HKUST-1, has been evaluated for its ability to eliminate Escherichia coli and generate sulphate radicals as catalyst for the treatment of effluents with a high microbiological load via peroxymonosulphate (PMS) activation. The disinfection process has been optimized, achieving complete elimination of Escherichia coli growth after 30 min of testing using a concentration of 60.5 mg/L HKUST-1 and 0.1 mM of PMS. To overcome the operational limitations of this system and facilitate its handling and reutilization in a flow disinfection process, HKUST-1 has been efficiently encapsulated on polyacrylonitrile as a novel development that could be scaled up to achieve continuous treatment.

Construction of a bioactive copper-based metal organic framework-embedded dual-crosslinked alginate hydrogel for antimicrobial applications

Metal-organic frameworks (MOFs) containing bioactive metals have the potential to exhibit antimicrobial activity by releasing metal ions or ligands through the cleavage of metal-ligand bonds. Recently, copper-based MOFs (Cu-MOFs) with sustained release capability, porosity, and structural flexibility have shown promising antimicrobial properties. However, for clinical use, the controlled release of Cu²⁺ over an extended time period is crucial to prevent toxicity. In this study, we developed an alginate-based antimicrobial scaffold and encapsulated MOFs within a dual-crosslinked alginate polymer network. We synthesized Cu-MOFs containing glutarate (Glu) and 4,4'-azopyridine (AZPY) (Cu(AZPY)-MOF) and encapsulated them in an alginate-based hydrogel through a combination of visible light-induced photo and calcium ion-induced chemical crosslinking processes. We confirmed Cu(AZPY)-MOF synthesis using scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, and thermogravimetric analysis. This antimicrobial hydrogel demonstrated excellent antibacterial and antifungal properties against two bacterial strains (MRSA and S. mutans, with >99.9 % antibacterial rate) and one fungal strain (C. albicans, with >78.7 % antifungal rate) as well as negligible cytotoxicity towards mouse embryonic fibroblasts, making it a promising candidate for various tissue engineering applications in biomedical fields.

Facile synthesis of ZIF-8-lignosulfonate microspheres with ultra-high adsorption capacity for Congo red and tetracycline removal from water

Zeolitic imidazolate frameworks (ZIFs) can be used as adsorbent to efficiently adsorb organic pollutants. However, the hydrophobicity of the ZIFs may be easily to form ZIFs nanoparticles aggregates, hampering the effective and practical application in adsorption. In this study, novel spherical composites of ZIF-8 incorporated with lignosulfonate (LS) were synthesized by in-situ growth method. The effects of different mass ratios of LS and Zn in ZIF-8-LS composites were evaluated with respect to structural characteristics and adsorption properties. As an adsorbent for adsorptive removing Congo Red (CR) and tetracycline (TC) from water, the prepared ZIF-8-LS₄ shows the best adsorption capacity of 31.5 mg g^-1 and 48 mg g^-1, respectively. The spherical structure facilitates the contact between the ZIF-8 and the adsorbed substance, in addition to the H-bonding, electrostatic and π-π stacking interactions also contribute to the improvement of the adsorption performance of the ZIF-8-LS₄ composite. The outstanding adsorption capacity and good reusability of the ZIF-8-LS₄ composite provide a good prospect for the effective removal of other contaminants from water.

Metal-organic frameworks/cellulose hybrids with their modern technological implementation towards water treatment

Metal-organic frameworks (MOFs) are amongst the most attractive porous polymeric networks with appealing properties. However, their inherent fragility, powder nature, low processibility, and handling present some exceptional challenges for high-tech commercial applications. Currently, economic and environmental concerns drive the development of some bioinspired polymeric matrices containing MOFs. As an artifact, the availability of previously unattainable properties is negotiated by conjugating cellulosic materials with crystalline MOFs. Thus, multi-dimensional organic-inorganic hybrid composites are formed with high electrical, optical, mechanical, and thermal features. These MOF/cellulose hybrids, known as CelloMOFs (cellulose MOFs), have remarkable mechanical properties with tunable porosities, specific surface area and accessible active sites, making them ideal for real-world troubleshooting applications such as wastewater treatment, chemical sensing, energy storage, and so on. In this review, current state-of-the-art strategic synthesis routes for fabrication of MOF/cellulose composites with a specific focus on CelloMOFs as a potential tool for mitigation of the targeted emerging water contaminants have been done under the same umbrella, which has previously been less explored. Streamlining discussions on general properties such as raw material selection, structural analysis of cellulose, availability of surface functional groups, cellulose-metal node interactions, cellulose charging, and so on have been emphasized, as has integration with robust MOFs. A better understanding of these fundamental properties is critical because they will have a significant impact on the performance of MOF/cellulose composites in a variety of applications. Furthermore, at the end of this review, the challenges and perspectives of using CelloMOFs have been discussed in a concise manner in order to improve their practical utility rather than just concept mapping.

MOF@biomass hybrids: Trends on advanced functional materials for adsorption

This contribution aims to demonstrate the scope of new hybrids between biomass and metal-organic frameworks (MOF@biomass) used in the adsorption process of pollutants. After a brief presentation of the use of the main series of MOFs as efficient adsorbents for different types of pollutants, the limitations of these structures related to particle size and hydrodynamic problems during their application are highlighted. Lignocellulosic biomasses are also recognized as an alternative adsorbent, mainly due to their high natural abundance and their low environmental impact during and after their application. The limited capacity of bioadsorbents becomes important in this research. Consequently, the largest amount of information existing in the last ten years on MOF-Biomass functionalization as a hybrid and improvement technology for adsorption processes is compiled, analyzed, compared and contrasted. So far, there is no evidence of works that exploit the concept of functionalization of adsorbents of different nature to give rise to new hybrid materials. Through this review it was found that the hybrids obtained show a higher adsorption capacity (Qe) compared to their precursors, due to the increase of organic functional groups provided by the biomass. Thus, for heavy metals, dyes, Arsenium anions and other organic and pharmaceutical compounds, there are increases in Qe of about 100 mg g^-1. The possibility of the new hybrid being studied for desorption and reuse processes is also raised, resulting in a new line of research that is attractive for the industry from an economic and environmental point of view. The functionalization methods and techniques used in the studies cited in this article are outlined. In conclusion, this research brings a new horizon of study in the field of adsorption and mentions the main future challenges related to new sustainable applications.

Physical and Spectroscopic Characterization of the Microcrystalline Cellulose Derivatives from Corn Cob and Daniella Oliveri Wastes

Cellulose was extracted from wood dust waste samples of Daniella oliveri and corn cobs by acetic acid and alkaline pretreatment methods, while microcrystalline cellulose (MCC) derivative was produced by acid hydrolysis in 2 M HCl. The samples were tested for pH, moisture content, swelling capacities and ash contents. The data obtained were compared with those of commercial MCCs found in the literature. The functional groups in the microcrystalline cellulose derivatives was confirmed by the Fourier transform infrared (FTIR) spectroscopic method with characteristic absorption bands of;–OH stretching at 3416 cm-1; C-H stretching at 2918 cm-1; -OH bending at 1377 cm-1; 1159 cm-1; and C-O-C pyranose ring skeletal vibrations at 1026-1033 cm-1. The crystallinity absorption bands appeared at 1436 and 850 cm-1. The characteristic morphological features were established by scanning electron microscopy (SEM). Furthermore, the crystallinity of the microcrystalline cellulose was further confirmed using the X-ray powder diffraction (X-RD) technique, which showed three main reflections at 2θ=14.70°, 22.09°, and 34.24°.These results supported that microcrystalline cellulose derivative as cellulose I type and the acid pretreatment did not affect the structure of the MCC. The crystallinity indices were 69.3 and 73.2%, respectively. Daniella Oliveri and corn cob microcrystalline cellulose are, therefore, potential materials for further processing.

A durable and stable hollow carrier based on metal-phenolic network composed of ZnII and proanthocyanidins/polydopamine

Metal-phenolic networks (MPNs), which are formed by phenolic molecules and metal ions via coordination bonds, are emerging as highly templated functional metal-organic materials. These networks are mostly used in the form of particles for short-term in vivo drug delivery; however, there is a lack of research on durable and stable MPN hollow particles as delivery carriers for in vitro applications. In this study, hollow and yolk-like hybrid cubic MPNs were prepared by etching zeolitic imidazolate framework-8 (ZIF-8) with proanthocyanidins (PCs). Polydopamine (PDA) resulting from the oxidative self-polymerisation of dopamine was deposited on the surface of the fabricated MPN to obtain a PDA coating, which enhanced the mechanical properties of the MPN. The prepared Zn^II-PC/PDA capsules consisted of two layers: a Zn^II-PC layer and a PDA-PDA layer. It showed stability at 25 ℃ for at least 280 days after freeze-drying. Moreover, when loaded with carvacrol, this MPN exhibited an enhanced antibacterial performance. Therefore, this study lays the foundation for the use of MPNs as long-lasting functional carriers.

Advances in Metal-Organic Frameworks MIL-101(Cr)

MIL-101(Cr) is one of the most well-studied chromium-based metal-organic frameworks, which consists of metal chromium ion and terephthalic acid ligand. It has an ultra-high specific surface area, large pore size, good thermal/chemical/water stability, and contains unsaturated Lewis acid sites in its structure. Due to the physicochemical properties and structural characteristics, MIL-101(Cr) has a wide range of applications in aqueous phase adsorption, gas storage and separation, and catalysis. In this review, the latest synthesis of MIL-101(Cr) and its research progress in adsorption and catalysis are reviewed.

Ferric iron loaded porphyrinic zirconium MOFs on corncob for the enhancement of diuretics extraction

Herein, corncob waste was used as a scaffold for the fabrication of effective adsorbents. Porphyrinic zirconium metal-organic frameworks (MOFs) PCN-223 and PCN-224 constructed by different numbers of Zr6 cluster nodes were grown on the surface of the corncob. Fe (Ш) ions were implanted in the porphyrin ring by post-synthesis modification. The results showed that the extraction capacity of diuretics on PCN-224@corncob containing suitable pore size was larger than that of PCN-223@corncob. The adsorption of diuretics was further enhanced because of the electrostatic effect caused by implantation of Fe (Ш) ions. PCN-224-Fe@corncob was recyclable and selective for the extraction of furosemide (Fur) and bumetanide (Bum). Coupled in-syringe solid phase extraction (IS-SPE) with ultra-performance liquid chromatography (UPLC), an efficient, sensitive, and stable method was established. With a sensitivity between 0.6 and 1.0 μg/L and a recovery between 83.2% and 119.2%, it is used for the analysis of trace amounts of Fur and Bum in weight loss products and environmental water. The functionalized corncob has potential application for the adsorption of diuretics, and the metal ions implantation in MOFs provides a promising strategy for enhancing extraction capacity.

Advanced MOFs@aerogel composites: Construction and application towards environmental remediation

Environmental pollution has drawn forth advanced materials and progressive techniques concentrating on sustainable development. Metal-organic frameworks (MOFs) have aroused vast interest resulting from their excellent property in structure and function. Conversely, powdery MOFs in highly crystalline follow with fragility, poor processability and recoverability. Aerogels distinguished by the unique three-dimensional (3D) interconnected pore structures with high porosity and accessible surface area are promising carriers for MOFs. Given these, combining MOFs with aerogels at molecule level to obtain advanced composites is excepted to further enhance their performance with higher practicability. Herein, we focus on the latest studies on the MOFs@aerogel composites. The construction of MOFs@aerogel with different synthetic routes and drying methods are discussed. To explore the connection between structure and performance, pore structure engineering and quantitation of MOFs content are outlined. Furthermore, various types of MOFs@aerogel composites and their carbonized derivatives are reviewed, as well as the applications of MOFs@aerogel for environmental remediation referring to water purification and air clearing. More importantly, outlooks towards these emerging advanced composites have been presented from the perspective of practical application and future development.

Effective extraction of fluoroquinolones from water using facile modified plant fibers

In this study, ecofriendly and economic carboxy-terminated plant fibers (PFs) were used as adsorbents for the effective in-syringe solid phase extraction (IS-SPE) of fluoroquinolone (FQ) residues from water. Based on the thermal esterification and etherification reaction of cellulose hydroxy with citric acid (CA) and sodium chloroacetate in aqueous solutions, carboxy groups grafted onto cotton, cattail, and corncob fibers were fabricated. Compared with carboxy-terminated corncob and cotton, CA-modified cattail with more carboxy groups showed excellent adsorption capacity for FQs. The modified cattail fibers were reproducible and reusable with relative standard deviations of 3.2%–4.2% within 10 cycles of adsorption-desorption. A good extraction efficiency of 71.3%–80.9% was achieved after optimizing the extraction condition. Based on carboxylated cattail, IS-SPE coupled with ultra-performance liquid chromatography with a photodiode array detector was conducted to analyze FQs in environmental water samples. High sensitivity with limit of detections of 0.08–0.25 μg/L and good accuracy with recoveries of 83.8%–111.7% were obtained. Overall, the simple and environment-friendly modified waste PFs have potential applications in the effective extraction and detection of FQs in natural waters.

•

Plant fibers were functionalized by green methods.

•

The bio-adsorbents were applied for the extraction of fluoroquinolones.

•

The higher carboxy content in fibers improved extraction performance.

•

Carboxylated cattail was efficient in the adsorption of fluoroquinolones in environmental waters.

Cellulose-Based Nanomaterials Advance Biomedicine: A Review

There are various biomaterials, but none fulfills all requirements. Cellulose biopolymers have advanced biomedicine to satisfy high market demand and circumvent many ecological concerns. This review aims to present an overview of cellulose knowledge and technical biomedical applications such as antibacterial agents, antifouling, wound healing, drug delivery, tissue engineering, and bone regeneration. It includes an extensive bibliography of recent research findings from fundamental and applied investigations. Cellulose-based materials are tailorable to obtain suitable chemical, mechanical, and physical properties required for biomedical applications. The chemical structure of cellulose allows modifications and simple conjugation with several materials, including nanoparticles, without tedious efforts. They render the applications cheap, biocompatible, biodegradable, and easy to shape and process.

Low-Temperature and Additive-Free Synthesis of Spherical MIL-101(Cr) with Enhanced Dye Adsorption Performance

The chromium-benzenedicarboxylate metal–organic framework (MOF), MIL-101(Cr), is one of the most well-investigated and widely used prototypical MOFs. Regarding its synthesis, the use of a toxic modulator (usually HF) and high reaction temperature (220 °C) are the main factors hindering its further expansion of production and utilization. In fact, high quality MIL-101(Cr) crystals can be prepared at a much lower temperature (160 °C) with spherical morphology via an additive-free approach. Compared to traditional octahedral MIL-101(Cr), the spherical MIL-101(Cr) possesses higher adsorption performance toward dye molecules, including methyl orange (MO) and rhodamine B (RB). The results suggest that toxic additives and high reaction temperatures are not essential in the synthesis of MIL-101(Cr), and the fabrication of spherical MIL-101(Cr) may offer a facile and effective pathway for the large-scale industrial application of MIL-101(Cr).

Preparation and application of polyethyleneimine-modified corncob magnetic gel for removal of Pb(ii) and Cu(ii) ions from aqueous solution

As a biomass resource, corncob is a kind of agricultural by-product with wide sources and low cost. Because its composition contains a large number of functional polymers such as cellulose, chitosan, and semi chitosan, corncob can be chemically modified to prepare a variety of adsorption materials. In this study, a magnetic gel material (PEI-CC@Fe3O4) consisting of corncob modified by glutaraldehyde-crosslinked polyethyleneimine (PEI) was successfully prepared and applied to the adsorption of heavy metal ions in aqueous solutions. The structure, thermal stability, and adsorption of heavy metal ions of the magnetic gel material (PEI-CC@Fe3O4) were characterized by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction phase analysis (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The results showed that PEI was crosslinked to the corncob through Aldol reaction and Schiff-base reaction. The heavy metal ion adsorption experiment showed that the PEI-CC@Fe3O4 had better adsorption toward divalent copper ions and divalent lead ions at 303 K, and the maximum adsorption capacities reached 459.4 mg g-1 and 290.8 mg g-1, respectively. Moreover, the study of isothermal adsorption and adsorption kinetics shows that the adsorption process is pseudo-second-order kinetics model adsorption, which belongs to Langmuir isothermal adsorption. Such excellent adsorption performance will contribute to the application of corncob biomass materials in industrial polluted wastewater.

Cellulose-Based Materials for Water Remediation: Adsorption, Catalysis, and Antifouling

Cellulose-based materials have been advanced technologies that used in water remediation. They exhibit several advantages being the most abundant biopolymer in nature, high biocompatibility, and contain several functional groups. Cellulose can be prepared in several derivatives including nanomaterials such as cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), and TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidized cellulose nanofibrils (TOCNF). The presence of functional groups such as carboxylic and hydroxyls groups can be modified or grafted with organic moieties offering extra functional groups customizing for specific applications. These functional groups ensure the capability of cellulose biopolymers to be modified with nanoparticles such as metal-organic frameworks (MOFs), graphene oxide (GO), silver (Ag) nanoparticles, and zinc oxide (ZnO) nanoparticles. Thus, they can be applied for water remediation via removing water pollutants including heavy metal ions, organic dyes, drugs, and microbial species. Cellulose-based materials can be also used for removing microorganisms being active as membranes or antibacterial agents. They can proceed into various forms such as membranes, sheets, papers, foams, aerogels, and filters. This review summarized the applications of cellulose-based materials for water remediation via methods such as adsorption, catalysis, and antifouling. The high performance of cellulose-based materials as well as their simple processing methods ensure the high potential for water remediation.

Cr(VI) Adsorption from Aqueous Solution by UiO-66 Modified Corncob

To adsorb hexavalent chromium (Cr(VI)) in polluted water, this paper prepared a UiO-66 (Zr6O4(OH)4(BDC)12) modified granular corncob composite adsorbent by hydrothermal method with in situ loading of UiO-66 on pretreated corncob particles. The physicochemical properties of the synthesized samples were characterized. Batch adsorption experiments were conducted to investigate the adsorption process of aqueous Cr(VI) under various conditions (different ionic strength, pH and co-existing anions). The results showed that UiO-66 was successfully loaded on the modified corncob particles. The isothermal adsorption data of Cr(VI) adsorption by the UiO-66 modified corncob fit well with the Langmuir model with the maximum adsorption capacity of Cr(VI) on UiO-66@Corn+ being 90.04 mg/g. UiO-66 loading could increase Cr(VI) adsorption capacity of Corn+. The kinetic study showed that the equilibrium time for Cr(VI) adsorption on UiO-66 modified corncob was about 180 min and the kinetic data followed the pseudo-secondary kinetic model. The Cr(VI) adsorption capacity on UiO-66@Corn+ decreased with the increasing solution pH, and the optimum pH range was 4–6. The ionic strength has little effect on the Cr(VI) adsorption capacity, but the coexistence of CO32−, SO42− and PO43− in the solution could significantly decrease the equilibrium adsorption capacity of Cr(VI). The adsorption mechanism analysis showed that Cr(VI) was adsorbed on the surface of adsorbents through electrostatic attraction and was reduced further to the less toxic Cr(III) by the electron donor on the surface of adsorbent. The electrostatic interaction was the main force affecting the adsorption of Cr(VI) by UiO-66. UiO-66@Corn+ had an excellent removal efficiency of Cr(VI) and excellent reusability. UiO-66@Corn+ could effectively remove Cr(VI) from water and have a promising application.

Highly Efficient Removal for Methylene Blue and Cu2+ onto UiO-66 Metal-Organic Framework/Carboxylated Graphene Oxide-Incorporated Sodium Alginate Beads

Herein, we report a new metal-organic framework (MOF)-based composite beads adsorbent made via incorporating UiO-66 MOF, carboxylated graphene oxide (GOCOOH) into sodium alginate for efficient removal of methylene blue dye, and Cu2+ ions. The successful fabrication of the synthesized UiO-66/GOCOOH@SA composite beads was confirmed by means of X-ray diffraction, Fourier transform infrared, scanning electron microscopy, zeta potential, X-ray photoelectron spectroscopy analysis, and thermogravimetric analysis and BET measurement. The incorporation of both UiO-66 and GOCOOH into SA beads greatly increased their adsorption efficiency for the removal of both MB and Cu2+ with maximum adsorption capacities of 490.72 and 343.49 mg/g, respectively. The removal process of both MB and Cu2+ follows the pseudo-second-order model and Freundlich isotherm model. A plausible adsorption mechanism was discussed in detail. Regeneration tests clarified that the removal efficiencies toward both MB and Cu2+ remained higher than 87% after five cycles. These results reveal the potentiality of UiO-66/GOCOOH@SA beads as an excellent adsorbent.

Advances in decontamination of wastewater using biomass-basedcomposites: A critical review

Contaminant removal from wastewater using natural biosorbents has been widely studied as a suitable and environmentally benign alternative for conventional techniques. Currently, researchers are working on various biomass-based composites for wastewater remediation to improve the performance of natural biosorbents. This review takes into focus a wide range of biomass-based composites like hydrogel composites, metal oxide composites, magnetic composites, polymer composites, carbon nanotubes (CNTs) and graphene composites, metal organic framework composites (MOFs) and clay composites for the removal of various contaminants from wastewater. It is evident from the literature survey that the composite fabrication involves the modification of morphological and textural features of the biomass which results in significant enhancement of adsorption capacity. Apart from this, regeneration of the used biomass-based composite is also studied in depth in order to overcome the problem of solid waste generation. This review would prove to be beneficial for researchers who are currently focusing on the development of cost-effective, easily available, recyclable biomass-based composites with enhanced adsorption capacities for wastewater treatment.

Recent developments on MOF-based platforms for antibacterial therapy

With increasing pathogenic bacterial infection that is occurring worldwide, antibacterial therapy has become an important research field. There is great antimicrobial potential in the nanomaterial-based metal-organic framework (MOF) platform because it is highly biocompatible, biodegradable, and nontoxic, and it is now widely used in the anticancer agent industry and in the production of medical products. This review summarizes the possible mechanisms of representative MOF-based nanomaterials, and recounts recent progress in the design and development of MOF-based antibacterial materials for the remedy of postoperative infection. The existing shortcomings and future perspectives of the rapidly growing field of antimicrobial therapy addressing patient quality of life issues are also briefly discussed. Because of their wide applicability, further studies on the use of different MOF antimicrobial therapies will be of great interest.

Deployment of metal-organic frameworks as robust materials for sustainable catalysis and remediation of pollutants in environmental settings

From metal-organic chemistry, metal-organic frameworks (MOFs) are of supreme interest for catalysis and environmental settings. Owing to anthropogenic sources and booming industrial practices, the most challenging issue is increased water pollution and environmental insecurity. For instance, several types of synthetic dyes are toxic up to a certain extent, as emerging organic contaminants (EOCs) pose adverse environmental and potential health consequences. A gradual increase in the contamination sources and unpredictable environmental changes in terms of anthropogenic pollution severely affect both water availability and distribution. Therefore, the treatment of dyes containing wastewater matrices for water resource generation is one of the most important tasks, which must be addressed effectively. With structural tunability, MOFs have been appearing as a robust tool for remediating toxic pollutants from wastewater matrices. Moreover, the promising functionality, structural tunability, robust catalytic attributes, compatibility, large surface area, stability in water, and ease in surface functionalization make MOFs one of the considerable materials of interest. This review work spotlights the present-day progress related to MOFs and their catalytic and adsorptive chemistry for a sustainable environment. Following a brief introduction, the characteristic rendering MOFs, as adsorbents, are given with prominent examples. Next, several synthesis routes as a roadmap to engineer MOFs are discussed. From the applied perspective, the adsorptive and catalytic potentialities of MOFs as given by addressing sustainable mitigation of toxic dyes. The last section of the work illustrates key challenging issues and future directions by considering the suiting importance of MOFs.

Chiral poly(amide-imide)/ZnS nanocomposite as a new adsorbent for simultaneous removal of cationic dyes from aqueous solution

A new adsorbent, poly(amide-imide)/zinc sulfide nanocomposite (PAI/ZnS NC), was fabricated and identified by Fourier-transform infrared spectroscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy, field emission-scanning electron microscopy, and transmission electron microscopy. Then, the obtained NC was applied for the simultaneous removal of auramine O (AO) and rhodamine B (RB) dyes from aqueous solution via the interactions of hydrogen bonding, π– π stacking, and Lewis acid–base interaction. The effects of operational variables including pH, PAI/ZnS NC mass, AO and RB concentration, and sonication time on removal efficiency were examined and optimized values were found to be 8.0, 16 mg, 11 mg L−1, and 6 min, respectively. The adsorption capacities of PAI/ZnS NC for the removal of AO and RB dyes were found to be 70.92 and 91.74 mg g−1, respectively. Ultraviolet–visible spectrophotometer was used to determine the amount of residual dye in solution. Fitting the experimental equilibrium data to isotherm models such as Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich reveals the suitability of the Langmuir model with high correlation coefficients ( R2 = 0.998 for AO and R2 = 0.999 for RB). Pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich kinetic models applicability was tested and the pseudo-second-order equation controls the kinetics of the adsorption process. Furthermore, this study establishes that PAI/ZnS NC can be successfully applied as a low-cost adsorbent and conserve its high efficiency after nine cycles for the removal of AO and RB dyes.

Potential threats of zeolitic imidazolate framework-8 nanoparticles to aquatic fungi associated with leaf decomposition

Synthesis of zeolitic imidazolate framework-8 nanoparticles (ZIF-8 NPs) and evaluation of their potential threats on ecosystem functioning has been reported in this work. A 45-day indoor experiment was conducted to explore the effects of ZIF-8 NPs at three different concentrations (10, 100, and 1000 μg L^-1) on the aquatic fungal community associated with Populus nigra L. leaf litter decomposition. After chronic exposure, ZIF-8 NPs at 1000 μg L^-1 significantly inhibited fungal biomass and extracellular enzyme activities as a result of inhibition on carbon and nitrogen loss of leaves. Besides, ZIF-8 NPs at 10 μg L^-1 increased the percentage of Anguillospora in the fungal community and led Monographella cucumerina and Mycosphaerella tassiana to become the hub species, which eventually significantly promoted the decomposition of leaf litter. In conclusion, our study provides a reference for the possible ecotoxicity of ZIF-8 NPs on aquatic fungi, confirms the influence of ZIF-8 NPs on nutrient cycling in streams, and also emphasizes the importance of fungal community structure and hub species in the process of leaf litter decomposition.

Introducing reticular chemistry into agrochemistry

For survival and quality of life, human society has sought more productive, precise, and sustainable agriculture. Agrochemistry, which solves farming issues in a chemical manner, is the core engine that drives the evolution of modern agriculture. To date, agrochemistry has utilized chemical technologies in the form of pesticides, fertilizers, veterinary drugs and various functional materials to meet fundamental demands from human society, while increasing the socio-ecological consequences due to inefficient use. Thus, more useful, precise, and designable scaffolding materials are required to support sustainable agrochemistry. Reticular chemistry, which weaves molecular units into frameworks, has been applied in many fields based on two cutting-edge porous framework materials, namely metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs). With flexibility in composition, structure, and pore chemistry, MOFs and COFs have shown increasing functionalities associated with agrochemistry in the last decade, potentially introducing reticular chemistry as a highly accessible chemical toolbox into agrochemical technologies. In this critical review, we will demonstrate how reticular chemistry shapes the future of agrochemistry in the fields of farm sensing, agro-ecological preservation and reutilization, agrochemical formulations, smart indoor farming, agrobiotechnology, and beyond.

HKUST-1 modified ultrastability cellulose/chitosan composite aerogel for highly efficient removal of methylene blue

A novel composite HKUST-1/cellulose/chitosan aerogel (HKUST-1/CCSA) as an efficient adsorbent with hierarchical pores was prepared through a facile in situ growth way combining covalent cross-linking, vacuum freeze-drying, and solvothermal methods. By incorporating with cellulose (CE), covalently cross-linked cellulose (CE)/chitosan (CS) composite aerogel exhibits good stability, maintaining fine morphology and structures in acidic solutions under solvothermal conditions. Meantime, a high content of CS is beneficial to enhancing the growth of HKUST-1. Finally, the mass loading ratio of HKUST-1 is as high as 42.54 % in HKUST-1/CCSA. The BET specific surface area of HKUST-1/CCSA reaches 457.75 m² g^-1, which is much larger than that of CCSA (9.74 m² g^-1). HKUST-1/CCSA was applied to remove methylene blue with high adsorption capacity (526.3 mg g^-1) and good recycling capability. This strategy can provide an effective and facile pathway to prepare ultra-stable polysaccharide-based composite aerogel with high specific surface area and hierarchical pores, branching out more applications in pollutant treatment fields.

Nickel aluminum layered double oxides modified magnetic biochar from waste corncob for efficient removal of acridine orange

The objective of this work was to use corncob as raw material to prepare green reusable magnetic biochar for removal of dyes in wastewater. For this purpose, an environmentally friendly NiAl layered double oxides modified magnetic corncob biochar (MC₁/NiAl-LDO) was obtained by pyrolysis of NiAl layered double hydroxides modified magnetic corncob biochar (MC₁/NiAl-LDH) at 700 °C for 3 h. The surface area of MC₁/NiAl-LDO is 552.62 m²·g^-1, which was much higher than that of MC₁ (26.83 m²·g^-1). MC₁/NiAl-LDO for acridine orange (AO) exhibited higher adsorption ability, the adsorption capacity of MC₁/NiAl-LDO was increased by 90% compared with MC₁. Adsorption experiments for AO on MC₁/NiAl-LDO were carried with effect of pH, adsorption time, initial concentrations of AO and ionic strength. MC₁/NiAl-LDO can be recycled nine times. The results exhibited that MC₁/NiAl-LDO was a low cost adsorbent, providing good example for th agricultural waste recycling.

Network interior and surface engineering of alginate-based beads using sorption affinity component for enhanced phosphate capture

In order to alleviate the environmental problems caused by excessive discharge of phosphate, an environmental friendly and highly efficient bio-sorbent (SA-La@PEI) for phosphate was fabricated by combing strategies of sorption affinity component mediated and poly(ethylenimine) surface engineering of alginate beads. Various characterization methods like SEM, FTIR, XRD and XPS were adopted to examine the morphology and functional group composition of SA-La@PEI. Through detailed tests, SA-La@PEI exhibited excellent adsorption performance of 121.2 mg/g, which was better than most published materials. More importantly, the outstanding phosphate selectivity of SA-La@PEI was exposed when NO₃^-, HCO₃^-, SO₄^2- and Cl^- were added to the phosphate solution. Considering the integrated components in composites, both chemical precipitation and electrostatic attraction can be considered as the dominant mechanisms of phosphate adsorption. Totally, as-prepared SA-La@PEI beads might be a promising sorbent for the decontamination of excessive phosphate because of its low-cost, excellent adsorption performance and mechanical strength.

Enzymatic preparation of oxidized viscose fibers-based biosorbent modified with ε-polylysine for dyes removal and microbial inactivation

A novel fiber-based biosorbent for dyes removal and microbial inactivation was prepared by enzymatic oxidization of viscose fibers and further modification with ε-polylysine. Glucose oxidase (GOx) was first employed as the enzyme for oxidation of viscose fibers. The consequences illustrated that the hydroxyl group on C1 position of viscose fibers was successfully oxidized with oxidation ratio of 2.43 ± 0.31%. Subsequently, ε-polylysine with average molecular weight of 4.44 ± 1.13 KDa and antimicrobial activity to E. coli of 90.48 ± 1.64 was modified with oxidized viscose fibers by lipase. Experimental results showed that oxidized viscose fibers were successfully modified with ε-polylysine with optimum degree of modification (DM) of 13.56 ± 1.05%. This oxidized viscose fiber modified with ε-polylysine (OVF-PL) displayed good dyes adsorption (or dyes removal) capacity for both anionic and cationic dyes, especially for anion dyes. Furthermore, OVF-PL showed excellent antimicrobial activity against E. coli and B. subtilis, particularly for E. coli, with GIB of 92.65%. Such fiber-based may offer a new pathway for preparing economical and efficient biosorbent for environmental remedy purpose.

Effects of charge density and molecular weight of papermaking sludge-based flocculant on its decolorization efficiencies

The charge densities (CD) and molecular weights (MW) of the flocculants are closely related to their application performances, but seldom researches focus on the effects of flocculant CD and MW on decolorization efficiencies. Herein, a series of flocculants with various CD and MW levels, named as PBF_1-9, were designed and synthesized from papermaking sludge. The physicochemical characteristics of the PBF_1-9 were measured by fourier transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), X-ray photoelectron spectroscopy (XPS) and particle charge density analyzer (PCD). The efficiencies of PBF_1-9 were studied in the reactive blue (RB) dye removals by flocculation under different process conditions. The operation costs of the flocculants were evaluated at their optimal dosages. Also, the pH-independences and ion-tolerances of the aforementioned flocculants were studied in terms of the molecular levels. The experimental results exhibited that the flocculants CD or MW values were relevant to their flocculation behaviors and operation costs. CD values played a dominant role in color removal efficiencies and the costs, whereas MW values were critical to the floc structure. The pH or ion-independences of the flocculants were significantly dependent on the CD and MW values. However, some conclusions, conflicted with prior studies, were observed in this work. For instance, flocculant with the highest CD and MW levels was not the most effective one in enduring pH variation and the coexisting ions. The floc properties, including floc size, resistance and recovery ability, were relatively insensitive to flocculant intrinsic CD and MW levels when the flocculants were used at their optimal dosages. Furthermore, the possible relevance between CD or MW levels and the flocculation mechanisms have been proposed in this work. Exploring the effects of flocculants CD and MW levels could precisely control the flocculant characteristics to achieve satisfactory decontamination efficiencies with low costs.

Megamerger of biosorbents and catalytic technologies for the removal of heavy metals from wastewater: Preparation, final disposal, mechanism and influencing factors

Heavy metal pollution, because of its high toxicity, non-biodegradability and biological enrichment, has been identified as a global aquatic ecosystems threat in recent decades. Due to the high efficiency, low cost, satisfactory recyclability, easy storage and separation, biosorbents have exhibited a promising prospect for heavy metals treatment in aqueous phase. This article comprehensively summarized different types of biosorbents derived from available low-cost raw materials such as agricultural and forestry wastes. The raw materials obtained are treated with conventional pretreatment or novel methods, which can greatly enhance the adsorption performance of the biosorbents. The suitable immobilization methods can not only further enhance the adsorption performance of the biosorbents, but also facilitate the process of separating the biosorbents from the wastewater. In addition, once biosorbents are put into large-scale use, the final disposal problems cannot be avoided. Therefore, it is necessary to review the currently accepted final disposal methods of biosorbents. Moreover, through the analysis of the adsorption and desorption mechanisms of biosorbents, it is not only beneficial to find the better methods to improve the adsorption performance of the biosorbents, but also better to explain the influencing factors of adsorption effect for biosorbents. Especially, different from many researches focused on biosorbents, this work highlighted the combination of biosorbents with catalytic technologies, which provided new ideas for the follow-up research direction of biosorbents. Finally, the purpose of this paper is to inject new impetus into the future development of biosorbents.

Copper-Based Metal-Organic Framework as a Controllable Nitric Oxide-Releasing Vehicle for Enhanced Diabetic Wound Healing

Chronic wounds are one of the most serious complications of diabetes mellitus. Even though utilizing nitric oxide (NO) as a gas medicine to repair diabetic wounds presents a promising strategy, controlling the NO release behavior in the affected area, which is vital for NO-based therapy, still remains a significant challenge. In this work, a copper-based metal-organic framework, namely, HKUST-1, has been introduced as a NO-loading vehicle, and a NO sustained release system with the core-shell structure has been designed through the electrospinning method. The results show that the NO is quantificationally and stably loaded in the HKUST-1 particles, and the NO-loaded HKUST-1 particles are well incorporated into the core layer of the coaxial nanofiber. Therefore, NO can be controllably released with an average release rate of 1.74 nmol L^-1 h^-1 for more than 14 days. Moreover, the additional copper ions released from the degradable HKUST-1 play a synergistic role with NO to promote endothelial cell growth and significantly improve the angiogenesis, collagen deposition as well as anti-inflammatory property in the wound bed, which eventually accelerate the diabetic wound healing. These results suggest that such a copper-based metal-organic framework material as a controllable NO-releasing vehicle is a highly efficient therapy for diabetic wounds.

Eu-metal organic framework@TEMPO-oxidized cellulose nanofibrils photoluminescence film for detecting copper ions

Metal-organic frameworks (MOFs) are emerging highly crystallized three-dimensional network complex formed by self-assembling metal ions and organic ligands. However, all MOFs are nanoscale and micro scale powder materials, which greatly impedes their further applications. In this study, a transparent Eu-MOF@TEMPO-oxidized cellulose nanofibrils (Eu-MOF@TOCNF) photoluminescence material for specifically detecting copper ions was fabricated via in-situ synthesis in hydroalcoholic medium. Scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, Fluorescence spectrometer and other equipment were applied to characterize functionalized TOCNF film samples, and the results confirmed the successful fabrication of the functionalized TOCNF film with stable fluorescence properties. The film performed a high selectivity toward copper ion in the presence of other interfering metal ions. The fluorescence intensity of the film decreased gradually with the increase of copper ion concentration, and I₀/I-1 developed a good linear relationship with [Cu²⁺], which made the film a promising material for detecting Cu²⁺ in water body.