Multiple active sites cellulose-based adsorbent for the removal of low-level Cu(II), Pb(II) and Cr(VI) via multiple cooperative mechanisms

Sustainable triethylenetetramine modified sulfonated graphene oxide/chitosan composite for enhanced adsorption of Pb(II), Cd(II), and Ni(II) ions

A novel sulfonated group and triethylenetetramine modified GO/chitosan (GO-CS) adsorbent (T-SGO-CS) was successfully prepared and utilized for the adsorption of heavy metal ions from single-metal, binary-metal, and ternary-metal solutions. In a single system, the adsorption capacity was 312.28 mg/g for Pb2+, 260.52 mg/g for Cd2+, and 84.61 mg/g for Ni2+, whereas, Adsorption of Pb(II), Cd(II), and Ni(II) in binary and ternary systems was systematically studied. In tertiary systems, the effect of competitive adsorption was more pronounced. In addition, T-SGO-CS exhibited a high adsorption capacity and was recyclable for Pb2+, Cd2+, and Ni2+. T-SGO-CS is a novel and highly efficient adsorbent for omnidirectionally enhancing the adsorption of Pb2+, Cd2+, and Ni2+, as demonstrated by these results. Therefore, T-SGO-CS could be investigated as a potential new material for future applications in heavy metal removal.

Cellulose phosphonate/polyethyleneimine nano-porous composite remove toxic Pb(II) and Cu(II) from water in a short time

Current cellulose-based adsorbents suffer from the drawbacks of low adsorption capacity or slow adsorption rate for heavy metal ions. It is imperative to prepare new cellulose-based materials to improve the adsorption ability. In this work, we aim to introduce phosphonate groups to improve the adsorption ability of cellulose and select polyethyleneimine (PEI) for synergistic adsorption. A novel cellulose phosphonate/polyethyleneimine composite (MCCP-PEI) is prepared via the Mannich reaction. The structure and composition of MCCP-PEI are characterized by various advanced microscopy and spectroscopy techniques, and the results show that MCCP-PEI possesses abundant nano-porous structure, strong chelating sites, and excellent hydrophilicity. Besides, the adsorption behavior of MCCP-PEI for heavy metals has been systematically investigated. The results show that the adsorbent can quickly remove toxic Cu(II) and Pb(II) from water within 15 min and 20 min, respectively. The saturated adsorption capacity for Cu(II) and Pb(II) is 250.0 and 534.7 mg·g-1, respectively. X-ray photoelectron spectroscopy analysis combined with Density Functional Theory calculations reveal that the adsorption mechanism is chemical complexation and electrostatic attraction, and the phosphonate group plays a key role in the adsorption process.

Regulating steric hindrance in difunctionalized porous aromatic frameworks for the selective separation of Pb(II)

Efficient and selective removal of Pb(II) from wastewater with complex matrix remains a challenging task. Porous aromatic frameworks (PAFs) with predesigned functional building blocks provide a favorable platform for the selective separation of Pb(II). Herein, the bifunctional SPAFs with the introduction of -OH and -SO3H were synthesized through rationally optimizing their steric hindrance. As a result, the SPAF-0.75 exhibits favorable adsorption capacity of Pb(II) (212.34 mg g-1), which is 22 times larger than pristine framework. Competition experiment indicates that SPAF-0.75 possess the selective removal of Pb(II) without interfering from co-existing metal ions. The removal rate of SPAF-0.75 still retain at 100% after six successive cycles. The DFT calculation illustrates that -OH and -SO3H are co-participate in the process of capturing Pb(II), revealing SPAF-0.75 preferred removal of Pb(II) owing to the lowest adsorption energy (ΔEab = -3.99 eV). This study extend the understanding of the structure-property relationship and facilitate new possibilities for PAFs.

Cellulose Modified with Polyethylenimine (PEI) Using Microwave Methodology for Adsorption of Chromium from Aqueous Solutions

A large amount of agricultural waste was used to prepare cellulose (Cel) and then the surface was modified with PEI (Cel-PEI) using the microwave method. To be used as a metal adsorbent, the adsorption of Cr (VI) from an aqueous solution by Cel-PEI was measured using Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA) techniques. The parameters of Cr (VI) adsorption in solution by the Cel-PEI adsorbent were as follows: the pH of the solution was 3, the concentration of the chromium solution was 100 mg/L, and the adsorption time was 180 min at 30 °C using 0.01 g of adsorbent. Cel-PEI had a Cr (VI) adsorption capacity of 106.60 mg/g, while the unadjusted Cel was 23.40 mg/g and the material recovery showed a decrease in efficiency of 22.19% and 54.27% in the second and third cycles, respectively. The absorption isotherm of chromium adsorption was also observed. The Cel-PEI material conformed to the Langmuir model with an R² value of 0.9997. The kinetics of chromium adsorption showed that under pseudo-second-order analysis, with R² values of 0.9909 and 0.9958 for Cel and Cel-PEI materials, respectively. The G° and H° values of the adsorption process were negative, indicating that the adsorption is spontaneous and that the adsorption process is exothermic. The efficient preparation adsorbent materials for Cr (VI) was achieved using a short microwave method that is low-cost and environmentally friendly for use in the treatment of Cr-contaminated wastewater.

Efficiency and mechanism in preparation and heavy metal cation/anion adsorption of amphoteric adsorbents modified from various plant straws

Cellulose can be modified for the loading of functional groups such as amino groups, sulfydryl groups, and carboxyl groups. Cellulose-modified adsorbents generally have specific adsorption capacities for either heavy metal anions or cations, and possess the advantages of wide raw material source, high modification efficiency, high adsorbent recyclability, and great convenience in recovery of the adsorbed heavy metals. At present, preparation of amphoteric heavy metal adsorbents from lignocellulose has attracted great attention. However, the difference in efficiency of preparing heavy metal adsorbents by modification of various plant straw materials and mechanism for the difference remain to be further explored. In this study, three plant straws, including Eichhornia crassipes (EC), sugarcane bagasse (SB) and metasequoia sawdust (MS), were sequentially modified by tetraethylene-pentamine (TEPA) and biscarboxymethyl trithiocarbonate (BCTTC) to obtain amphoteric cellulosic adsorbents (EC-TB, SB-TB and MS-TB, respectively), which can simultaneously adsorb heavy metal cations or anions. The heavy metal adsorption properties and mechanism before and after modification were compared. Pb(II) and Cr(VI) removal rates by the three adsorbents were 2.2-4.3 folds and 3.0-13.0 folds of those before modification, respectively, following the order of MS-TB > EC-TB > SB-TB. In the five-cycle adsorption-regeneration test, the Pb(II) and Cr(VI) removal rate by MS-TB decreased by 58.1 % and 21.5 %, respectively. Among the three plant straws, MS possessed the most abundant hydroxyl groups and the largest specific surface area (SSA), and accordingly MS-TB had the highest load of adsorption functional groups [(C)NH, (S)CS and (HO)CO] and also the largest SSA among the three adsorbents, which contribute to its highest modification and adsorption efficiency. This study is of great significance for screening suitable raw plant materials to prepare amphoteric heavy metal adsorbents with superior adsorption performance.

Adsorption of Pb (II) and Cu (II) by magnetic beads loaded with xanthan gum

Green and environmentally friendly and efficient separation adsorbents have attracted much attention in the treatment of heavy metal ions wastewater. In this study, xanthan gum (XG) was supported by fly ash magnetic beads (FAMB) to prepare adsorbent XG@FAMB. The effects of XG@FAMB dosage, pH value of the solution, adsorption time, and initial Pb (II) and Cu (II) concentration on its adsorption performance for Pb (II) and Cu (II) were investigated. The results show that under the conditions of pH 6, dosage of XG@FAMB 4.0 g/L, adsorption time 120 min, and initial concentration 60 mg/L, the maximum adsorption capacity of XG@FAMB for Pb (II) and Cu (II) was 14.93 mg/g and 14.88 mg/g, respectively. The adsorption process of Pb (II) and Cu (II) by XG@FAMB could be better described by the quasi-second-order kinetic model and Langmuir isothermal adsorption model, that is, the adsorption process is monolayer adsorption controlled by chemical action. The adsorption mechanism is that Pb (II) and Cu (II) coordinate with oxygen-containing functional groups hydroxyl and carboxyl on XG@FAMB surface, accompanied by electrostatic adsorption. XG@FAMB has the advantages of environmental protection of XG and easy solid-liquid separation of FAMB, and has a good removal effect on Pb (II) and Cu (II).

Synthesis of Hydrogels and Their Progress in Environmental Remediation and Antimicrobial Application

As a kind of efficient adsorptive material, hydrogel has a wide application prospect within different fields, owing to its unique 3D network structures composed of polymers. In this paper, different synthetic strategies, crosslinking methods and their corresponding limitations and outstanding contributions of applications in the fields of removing environmental pollutants are reviewed to further provide a prospective view of their applications in water resources sustainability. Furthermore, the applications within the biomedical field, especially in wound dressing, are also reviewed in this paper, mainly due to their unique water retention ability, antibacterial ability, and good biocompatibility. Finally, the development direction of hydrogels in the fields of environmental remediation and biomedicine were summarized and prospected.

Polysaccharide-based biopolymer hydrogels for heavy metal detection and adsorption

BACKGROUND

With rapid development in agriculture and industry, water polluted with heavy metallic ions has come to be a serious problem. Adsorption-based methods are simple, efficient, and broadly used to eliminate heavy metals. Conventional adsorption materials have the problems of secondary environmental contamination. Hydrogels are considered effective adsorbents, and those prepared from biopolymers are biocompatible, biodegradable, non-toxic, safe to handle, and increasingly used to adsorb heavy metal ions.

AIM OF REVIEW

The natural origin and easy degradability of biopolymer hydrogels make them potential for development in environmental remediation. Its water absorption capacity enables it to efficiently adsorb various pollutants in the aqueous environment, and its internal pore channels increase the specific surface area for adsorption, which can provide abundant active binding sites for heavy metal ions through chemical modification.

KEY SCIENTIFIC CONCEPT OF REVIEW

As the most representative of biopolymer hydrogels, polysaccharide-based hydrogels are diverse, physically and chemically stable, and can undergo complex chemical modifications to enhance their performance, thus exhibiting superior ability to remove contaminants. This review summarizes the preparation methods of hydrogels, followed by a discussion of the main categories and applications of polysaccharide-based biopolymer hydrogels.

Three-dimensional macroscopic aminosilylated nanocellulose aerogels as sustainable bio-adsorbents for the effective removal of heavy metal ions

Designing an environmentally benign bio-adsorbent for the removal of heavy metal ions from aqueous medium was a sustainable strategy to ensure water safety. Herein, three-dimensional macroscopic aminosilyated nanocellulose aerogels (APTM_S-modified TO-NFC) for the removal of heavy metal ions in water were successfully synthesized from bamboo-derived TEMPO-oxidized nanofibrillated cellulose (TO-NFC) and aminopropyltrimethoxysilane (APTMs) via a facile freeze-drying process. Owing to a relatively high BET surface area (129.32 m² g^-1), high porosity (99.14%) as well as high substitution degree of amino groups (0.41), the resulting APTM_S-modified TO-NFC aerogel exhibited good adsorption capacity of 99.0, 124.5, and 242.1 mg g^-1 for Cu²⁺, Cd²⁺ and Hg²⁺, respectively. Furthermore, the crosslinked and three-dimensionally porous architecture imparted it with relatively high compression strength, good excellent stability in water, and ease of recyclability from water after the usage. The pH value of the solution had a great influence on adsorption efficiency of the aerogel adsorbent, and optimal adsorption efficiency could be achieved at pH 3-7. Thermodynamic parameters suggested the spontaneous and endothermic nature of adsorption process. This work provides a facile method for preparing sustainable bio-adsorbent for effective heavy metal ions removal from aqueous medium.

Poly (Amidehydrazide) Hydrogel Particles for Removal of Cu2+ and Cd2+ Ions from Water

Poly(amidoamine)s (PAMAM) are very effective in the removal of heavy metal ions from water due to their abundant amine and amide functional groups, which have a high binding ability to heavy metal ions. We synthesized a new class of hyperbranched poly(amidehydrazide) (PAMH) hydrogel particles from dihydrazides and N,N'-methylenebisacrylamide (MBA) monomer by using the A2 + B4 polycondensation reaction in an inverse suspension polymerization process. In Cd2+ and Cu2+ ion sorption tests, the synthesized dihydrazide-based PAMH hydrogel particles exhibited sorption capacities of 85 mg/g for copper and 47 mg/g for cadmium. Interestingly, the PAMH showed only a 10% decrease in sorption ability in an acidic condition (pH = 4) compared to the diamine-based hyperbranched PAMAM, which showed a ~90% decrease in sorption ability at pH of 4. In addition, PAMH hydrogel particles remove trace amounts of copper (0.67 ppm) and cadmium (0.5 ppm) in water, below the detection limit.

Amidation modified waste polystyrene foam as an efficient recyclable adsorbent for organic dyes removal

Modifying environmentally harmful waste polystyrene foam as an efficient recyclable adsorbent for organic dyes is important. Amidation modified polystyrene (PS-SD) was prepared by the Friedel-Crafts reaction and N,N'-dicyclohexylcarbodiimide (DCC) dehydration condensation reaction of waste polystyrene foam. PS-SD had highly efficient removal performance for organic dyes in large volume water sample solutions, and equilibrium was achieved in 0.5 h. The maximum adsorption capacities for Methylene blue (MB) and Congo red (CR) were 881.62 and 1,880.91 mg/g, respectively, at room temperature according to the Langmuir adsorption isotherm (R² > 0.99). The kinetic data of the two dyes followed pseudo-second-order kinetics. The removal percentage remained high (>85%) after eight filtration-regeneration cycles. Experimental results showed that PS-SD was an excellent adsorbent for water treatment with high recyclability and long life.