Effect of rheological and structural properties of bacterial cellulose fibrils and whey protein biocomposites on electrosprayed food-grade particles

Enhanced bacterial cellulose production by Komagataeibacter species and Hibiscus sabdariffa herbal tea

This study proposed Hibiscus sabdariffa as a novel substrate for BC production with Komagataeibacter species and their consortia. K. intermedius is found as the most efficient producer (5.98 g/L BC, 3.56 × 10-2 g-1 h-1 productivity rate) following K. maltaceti (4.44 g/L BC, 2.64 × 10-2 g-1 h-1 productivity rate) and K. nataicola (3.67 g/L BC, 2.18 × 10-2 g-1 h-1 productivity rate). Whereas agitation increased BC production with K. nataicola (1.22-fold, 4.49 g/L BC), K. maltaceti (1.24-fold, 5.52 g/L BC) and K. intermedius (1.27-fold, 7.63 g/L BC), irregular shaped BC was obtained. This could be a novel result as Komagataeibacter consortia increased BC production by 1.17-2.01-fold compared to monocultures resulting as 8.11 g/L BC through the co-cultivation of K. maltaceti-K. intermedius. Maximum increase was found to be 1.75-fold (1.79-fold WHC), occurring with monoculture of K. maltaceti, while 1.94-fold (1.26-fold WHC) with K. maltaceti-K. intermedius consortium when H. sabdariffa-based media compared Hestrin-Schramm media. Based on these results, this could be a novel result as H. sabdariffa-based media may replace the use of HS media in BC production by means of a bioactive content-rich plant and obtaining 3-D ultrafine porous structure with high thermal resistant (∼460-500 °C) BC with mono and co-cultivation of Komagataeibacter species to be used in industrial area.

A composite gel formed by konjac glucomannan together with Nano-CF obtained by FeCl3-citric acid hydrolysis as a potential fat substitute

This study aims to fabricate composite gels using nano citrus fiber (Nano-CF) derived from the hydrolysis process of citric acid (CA) with FeCl3, with a simultaneous exploration of its potential as an substitute to fats. Investigation of varying FeCl3 concentrations (0.01 to 0.03 mmol/g of CA) revealed a significant enhancement in the water-holding and oil-retention capacity of the Nano-CF. The meticulous synthesis of the composite gels involved integrating nano citrus fibers with konjac glucomannan (KGM) through high-speed shearing, followed by a comprehensive evaluation of its microstructure and physicochemical attributes. Increasing the Nano-CF concentration within the gels led to a synergistic interaction with KGM, resulting in enhanced viscosity, improved thermal stability, and restricted water molecule mobility within the system. The gels initially displayed reduced firmness, resilience, and adhesive characteristics, followed by subsequent improvement. When the ratio of Nano-CF to KGM was 0.5:1, the composite gels exhibited texture parameters, viscosity, and viscoelastic stability comparable to whipped animal cream formulations. These findings provide a new idea for the application of Nano-CF/KGM composite gels in whipped cream.

Study of alkali-soluble curdlan/bacterial cellulose/cinnamon essential oil blend films with enhanced mechanical properties

In response to the growing demand for biodegraded film with high mechanical properties for complex preservation application scenarios, we developed a curdlan (CD) blended films with exceptional mechanical strength through an alkali dissolution method. Notably, the alkali-soluble CD film exhibited five-fold increase in tensile strength (TS) when compared to its water-soluble counterpart. Furthermore, the inclusion of 2 % bacterial cellulose (BC) resulted in a significant 41.1 % augmentation of the film's TS. Thermal stability improvements were observed through differential scanning calorimetry (DSC) analysis and thermogravimetric analysis (TGA). X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) results provided insights into alterations in film crystallinity and intermolecular interactions. Specifically, the incorporation of 10 % CEO led to an additional improvement in TS. Our experimental investigations involving the packaging of chilled fresh meat with these blended films unveiled their capacity to effectively inhibit microorganism growth, maintain meat color stability, delay protein decomposition and fat oxidation, and extend the storage time up to 9 days. Our study offers a promising solution for food packaging, emphasizing the development of a high-strength degradable CD/BC/CEO blended film, which holds potential for extending the shelf life of food products.

Electrospray-Assisted Fabrication of Dextran-Whey Protein Isolation Microcapsules for the Encapsulation of Selenium-Enriched Peptide

Selenium-enriched peptide (SP, selenopeptide) is an excellent organic selenium supplement that has attracted increasing attention due to its superior physiological effects. In this study, dextran-whey protein isolation-SP (DX-WPI-SP) microcapsules were fabricated via high-voltage electrospraying technology. The results of preparation process optimization showed that the optimized preparation process parameters were 6% DX (w/v), feeding rate Q = 1 mL/h, voltage U = 15 kV, and receiving distance H = 15 cm. When the content of WPI (w/v) was 4-8%, the average diameter of the as-prepared microcapsules was no more than 45 μm, and the loading rate for SP ranged from ~46% to ~37%. The DX-WPI-SP microcapsules displayed excellent antioxidant capacity. The thermal stability of the microencapsulated SP was improved, which was attributed to the protective effects of the wall materials for SP. The release performance was investigated to disclose the sustained-release capacity of the carrier under different pH values and an in-vitro-simulated digestion environment. The digested microcapsule solution showed negligible influence on the cellular cytotoxicity of Caco-2 cells. Overall, our work provides a facile strategy of electrospraying microcapsules for the functional encapsulation of SP and witnesses a broad prospect that the DX-WPI-SP microcapsules can exhibit great potential in the food processing field.

Pickering emulsion stabilized by cellulosic fibers: Morphological properties-interfacial stabilization-rheological behavior relationships

This work aimed to study the stabilization mechanism induced by different morphologies of cellulosic fiber in O/W emulsion. Three types of cellulosic fibers were named squashed cellulose, incompletely nanofibrillated cellulose, and completely nanofibrillated cellulose, respectively. Squashed cellulose acted as barriers between the droplets to stabilize emulsion via depletion flocculation, whereas incompletely nanofibrillated and completely nanofibrillated cellulose formed covering layer via interfacial adsorption and connected adjacent droplets to create the droplet-fiber network structure via bridging flocculation. Differently, completely nanofibrillated cellulose formed the denser covering layer leading to a more stability of droplet. Importantly, it had the higher capacity of bridging flocculation, which can tightly connect the adjacent droplets to form a stronger droplet-fiber 3D network structure. Consequently, in rheological analysis including creep compliance, and dynamic modulus, the corresponding emulsions showed excellent anti-deformation ability and dynamic stability. This study provides practical guidance on the productions of foodstuff and cosmetic.

Mechanistic understanding and potential application of electrospraying in food processing: a review

Electrospraying (ESPR) is a cost effective, flexible, and facile method that has been used in the pharmaceutical industry, and thanks to its wide variety of uses such as bioactive compound encapsulation, micronization, and food product coating, which have received a great attention in the food market. It uses a jet of polymer solution for processing food and food-derived products. Droplet size can be extremely small up to nanometers and can be regulated by altering applied voltage and flow rate. Compared to conventional techniques, it is simple, cost effective, uses less solvent and products are obtained in one step with a very high encapsulation efficiency (EE). Encapsulation provided using it protects bioactives from moisture, thermal, oxidative, and mechanical stresses, and thus provides them a good storage stability which will help in increasing the application of these ingredients in food formulation. This technique has an enormous potential for increasing the shelf life of fruit and vegetables through coating and improvement of eating quality. This study is aimed at overviewing the operating principles of ESPR, working parameters, applications, and advantages in the food sector. The article also covers new ESPR techniques like supercritical assisted ESPR and ESPR assisted by pressurized gas (EAPG) which have high yield as compared to conventional ESPR. This article is enriched with good information for research and development in ESPR techniques for development of novel foods.