Integrated treatment of perennial ryegrass: Structural characterization of hemicelluloses and improvement of enzymatic hydrolysis of cellulose

Effects of salicylic acid-grafted bamboo hemicellulose on gray mold control in blueberry fruit: The phenylpropanoid pathway and peel microbial community composition

Bamboo hemicellulose (HC) is a natural plant polysaccharide with good biocompatibility and biodegradability. But its poor antibacterial activity limits its application in fruits preservation. In this study, based on the good inducer of salicylic acid (SA) for plant diseases resistance, a novel antibacterial coating material was synthesized by grafting SA onto HC. The study aimed to investigate the synergistic effect of HC-g-SA on antibacterial ability, induces diseases resistance and microbial community composition of postharvest fruit. The graft copolymer treatment significantly reduced the incidence of gray mold caused by Botrytis cinerea in blueberries during storage (P < 0.05), and significantly stimulated the activity of key enzymes, including phenylalanine ammonia-lyase, chalcone isomerase, laccase, and polyphenol oxidase, leading to an increase in fungicidal compounds such as flavonoids, lignin, and total phenolics produced by the phenylpropanoid pathway in blueberries (P < 0.05). Moreover, the HC-g-SA coating altered bacterial and fungal community composition such that the abundance of postharvest fruit-peel pathogens was significantly reduced. After 8 days storage, the blueberry fruits treated by HC-g-SA had a weight loss rate of 12.42 ± 0.85 %. Therefore, the HC-g-SA graft copolymer had a positive impact on the control of gray mold in blueberry fruit during postharvest storage.

Copper-uptake mediated by an ecofriendly zwitterionic ionic liquid: A new challenge for a cleaner bioeconomy

This study aims to investigate the ability of an imidazolium biobased Zwitterionic Ionic Liquids (ZILs) in enhancing the phytoavailability of copper from garden (G) and vineyard (V) soils using the model plant ryegrass. Uncontaminated and artificially contaminated CuSO₄ soils, unamended and ZIL-amended soil modalities were designed. The copper/ZIL molar ratio (1/4) introduced was rationally established based on molecular modeling and on the maximal copper concentration in artificially contaminated soil. Higher accumulation of copper in the shoots was detected for the uncontaminated and copper contaminated ZIL amended V soils (18.9 and 23.3 mg/kg, respectively) contrary to G soils together with a ZIL concentration of around 3% (W/W) detected by LC-MS analyses. These data evidenced a Cu-accumulation improvement of 38% and 66% compared to non-amended V soils (13.6 and 13.9 mg/kg respectively). ZIL would be mainly present under Cu(II)-ZIL₄ complexes in the shoots. The impact on the chemical composition of shoot was also studied. The results show that depending on the soils modalitity, the presence of free copper and/or ZIL led to different chemical compositions in lignin and monomeric sugar contents. In the biorefinery context, performances of enzymatic hydrolysis of shoots were also related to the presence of both ZIL and copper under free or complex forms. Ecotoxicity assessment of the vineyard soil samples indicated that the quantity of copper and ZIL remaining in the soils had no significant toxicity. ZIL amendment in a copper-contaminated soil was demonstrated as being a promising way to promote the valorization of phytoremediation plants.

Differentiated Fractionation of Various Biomass Resources by p-Toluenesulfonic Acid at Mild Conditions

Biomass is the ideal substitute for petrochemical resources because of its renewable and abundant sources. p-Toluenesulfonic acid (p-TsOH) can effectively separate lignin from biomass under mild conditions, so it is highly expected in biomass fractionation to improve the utilization efficiency. In this study, we investigated the effect of p-TsOH differentiated fractionation of poplar sawdust, eucalyptus sawdust, and rice straw below 100 °C. According to the experimental results, upon pretreatment by p-TsOH of the three kinds of raw biomass, most of the lignin and hemicellulose of poplar sawdust and eucalyptus sawdust were removed, whereas the cellulose was retained, but most of the hemicellulose and cellulose of rice straw were kept, whereas the lignin was removed at similar conditions. The structures and compositions of pretreatment residues, lignin, and hemicellulose extracted from raw biomass were characterized by XRD, FTIR, HSQC-NMR, XPS, and SEM. The differentiated fractionation mechanism of biomass was analyzed. A better recognition and understanding of the factors affecting biomatrix opening and fractionation will allow for the identification of new pretreatment strategies that improve biomass utilization and permit the rational enzymatic hydrolysis of cellulose.

Effect of different pre-treatments on the redispersion capacity of spray-dried microfibrillated cellulose: Elaboration and characterization of biofilms

This study aimed to evaluate the influence of the addition of the cationic surfactant cetyltrimethylammonium bromide (CTAB) in microfibrillated cellulose (MFC/CNFs) suspensions submitted to different pretreatments to produce redispersible spray-dried (SD) MFC/CNFs. Suspensions pretreated with 5 % and 10 % sodium silicate and oxidized with 2,2,6,6,-tetramethylpiperidinyl-1-oxyl (TEMPO) were modified with CTAB surfactant and subsequently dried by SD. The SD-MFC/CNFs aggregates were redispersed by ultrasound to produce cellulosic films by the casting method. In summary, the results demonstrated that the addition of CTAB surfactant to the TEMPO-oxidized suspension was critical to achieving the most effective redispersion. The experimental results obtained using micrographs, optical (UV-Vis), mechanical, water vapor barrier properties, and the quality index confirmed that the addition of CTAB to the TEMPO-oxidized suspension favored the redispersion of spray-dried aggregates, development of cellulosic films with attractive properties, offering possibilities for the elaboration of new products, for example, in the production of bionanocomposites with higher mechanical performance. This research brings interesting insights into the redispersion and application of SD-MFC/CNFs aggregates, strengthening the commercialization of MFC/CNFs for industrial use.

Cross-Linked Carboxymethylcellulose Adsorbtion Membranes from Ziziphus lotus for the Removal of Organic Dye Pollutants

The goal of this study is to assess Ziziphus lotus's potential for producing carboxymethylcellulose adsorption membranes with the ability to adsorb methyl green from wastewaters by the revalorization of its cellulosic fraction. The cellulose from this feedstock was extracted by an alkaline process and TAPPI standard technique T 203 cm-99 and afterwards they were carboxymethylated. The obtained carboxymethylcelluloses were deeply characterized, being observed that the carboxymethylcellulose produced from the alkaline cellulose presented the higher solubility due to its lower crystallinity degree (53.31 vs. 59.4%) and its higher substitution degree (0.85 vs. 0.74). This carboxymethylcellulose was cross-linked with citric acid in an aqueous treatment in order to form an adsorption membrane. The citric acid provided rigidity to the membrane and although it was hydrophilic it was not soluble in water. By evaluating the potential of the produced membrane for the removal of pollutant dyes from wastewater, it was observed that the adsorption membrane prepared from the carboxymethylcellulose's produced from the Ziziphus lotus was able to remove 99% of the dye, methyl green, present in the wastewater. Thus, this work demonstrates the potential of the Ziziphus lotus for the production of a novel and cost-effective carboxymethylcellulose adsorption membrane with high capacity to treat wastewaters.

Recycled utilization of ryegrass litter in constructed wetland coupled microbial fuel cell for carbon-limited wastewater treatment

To solve wetland plant litter disposal and improve the nitrogen removal of carbon-limited wastewater, the integration of microbial fuel cell (MFC) and recycled utilization of ryegrass litter planted in constructed wetland (CW) may be effective. CW and MFC-CW with periodical ryegrass litter addition (10 days one cycle) were constructed to study the effects of ryegrass litter on nitrogen removal, electricity production and microorganism community. The results showed that total nitrogen removal of CW and MFC-CW after ryegrass litter addition reached 80.54 ± 10.99% and 81.94 ± 7.30%, increased by 22.19% and 17.50%, respectively. Three-dimensional excitation emission matrix fluorescence spectroscopy results revealed that the soluble organic matters produced by the hydrolyzed ryegrass litter were mainly tryptophan, tyrosine and fulvic acid, which promoted the growth of microorganisms and denitrification. The dosage of 200 g m^-2 did not cause the rise of refractory organic matter in the effluent. The ryegrass litter addition promoted the average voltage and power density slightly in MFC-CW, but the internal resistance also increased temporarily. Compared to the sole CW, current stimulation caused by MFC not only helped to increase the denitrification, but also accelerated the biomass hydrolysis. MFC could contribute to the enrichment and growth of functional microorganisms related to denitrification and organic degradation, such as Vogesella, Devosia, Thermomonas and Brevibacterium. The bacterial genera involved in the ryegrass litter degradation were mainly Thermomonas, Propionicimonas, TM7a, Clostridium_sensu_stricto_1 and so on. This study provided a promising way for practical applications of MFC-CW in the treatment of carbon-limited wastewater, especially in small ecological facilities.

Effect of steam explosion pretreatment on polysaccharide isolated from Poria cocos: Structure and immunostimulatory activity

This study aimed to examine the effects of steam explosion (SE) pretreatment on the structural characteristics and immunostimulatory activity of polysaccharide from Poria cocos. Results showed that the average molecular weights of native polysaccharide (PCP) and SE-pretreated polysaccharide (SEPCP) were 18.67 and 6.52 kDa, respectively. PCP and SEPCP shared the same profiles of monosaccharides (mannose, glucose, galactose, and fucose) in different composition ratios, that is, PCP in a molar percentage of 13.5:33:40.3:13.2 and SEPCP in a molar percentage of 2.1:90.3:5.8:1.8. The surface structure of PCP showed smooth and densely spherical particles, whereas SEPCP had a rough surface and porous honeycomb structure. The main linkage types of PCP comprised 1,6-α-d-Galp, 1,2,6-α-d-Glcp, and T-α-d-Manp, whereas SEPCP primarily contained 1,3-β-d-Glcp backbone and T-β-d-Glcp branches. Compared with PCP, we further revealed that SEPCP had a better immune enhancement on the phagocytic ability, NO production, and the secretion levels of TNF-α and IL-6 in RAW 264.7 cells. Collectively, our observations supported that SE pretreatment could help to change the structure and improve the immunostimulatory activity of polysaccharide from P. cocos. PRACTICAL APPLICATIONS: SE technology is extensively used to extract bioactive components with improved yields owing to this technology's benefits of low energy consumption and high efficiency. SE pretreatment was found to contribute to the destruction of cell-wall structure, which could help to enhance the extraction yields of P. cocos polysaccharide (PCP). Meanwhile, SE pretreatment also could change the structural features and improve the immunostimulatory activity of PCP. This study revealed that more bioactive PCP with strengthened immunoregulatory effect was obtained pretreated by SE. This study was able to provide the effective information on the application of steam explosion technology to promote the further development and utilization of PCP in the pharmaceutical and functional food fields.

Integrated pretreatment of banana agrowastes: Structural characterization and enhancement of enzymatic hydrolysis of cellulose obtained from banana peduncle

An integrated treatment coupling alkali, steam explosion and ammonia/chlorine-free bleaching with sequential mild acid pretreatment were performed to isolate and characterize cellulose from banana agrowastes followed by optimized enzymatic hydrolysis to glucose. The cellulose yield, compositional, microstructural, and morphological analysis initially obtained from three post-harvest banana agrowastes (peel, pseudostem, and peduncle) were surveyed. Isolation parameters for banana peduncle agrowastes, the most efficient precursor, were reconfigured for acid hydrolysis by applying an orthogonal L₉ array of Taguchi design. Effects of solution-to-pulp ratio, acid concentration, temperature, and reaction time on physicochemical parameters were assessed resulting in ~81% cellulose recovery. Subsequently, cellulase driven enzymatic conversion to glucose was modelled using response surface methodology (RSM), where the mutual influences of incubation time, enzyme concentration, substrate concentration, and surfactant concentration were investigated. Artificial Neural Network (ANN) modelling further improved upon RSM optimizations ensuing ~97% optimized glucose yield, verified experimentally.

Effect of temperature on simultaneous separation and extraction of hemicellulose using p-toluenesulfonic acid treatment at atmospheric pressure

Hemicelluloses were effectively separated using p-toluenesulfonic acid (p-TsOH) treatment at high temperature. High temperature and pressure promoted hydrolysis of hemicellulose, which limited its value upon recovery. In this study, bagasse hemicellulose was separated and extracted by p-TsOH treatment at atmospheric pressure. The effects of temperature, p-TsOH concentration, and time on hemicellulose separation and extraction were investigated. The optimal conditions were 80 °C, 3.0% p-TsOH, and 120 min. The separation and extraction yield of hemicellulose was 73.23% and 36.02%, respectively. Extraction hemicellulose with 95.60% purity was obtained. In addition, the dissolution mechanism of hemicellulose was analyzed. Degradation of β-glycosidic bonds was inhibited. Benzyl ether bond between carbohydrates and lignin was selectively cleaved. The skeleton structure of xylan in hemicellulose was protected while the functional groups of branch chain were severely damaged. It provides a valuable theoretical basis for the efficient separation and extraction of hemicellulose.

The structural and functional characteristics of soluble dietary fibers modified from tomato pomace with increased content of lycopene

The tomato pomace, a by-product of tomato processing, was rich in nutrients such as lycopene (Lyc), vitamins, phenols and soluble dietary fibers (SDF). Homogenization combined with enzymatic hydrolysis (HE) was firstly applied to obtain HE-pomace. The yield of Lyc was raised by 57.2% after HE treatment by the optimal condition. The extraction rate of HE-SDF was increased by 73.4%. In order to clarify the relationship between the SDF and the release of Lyc, SDFs were characterized by structural analysis and morphological determination. The results suggested that HE-SDF possessed smaller molecular weight and loose microstructure with shorter chains. It implied that the degradation of dietary fiber led to the release of Lyc molecules. Besides, HE-SDF exhibited stronger capacity of water-holding, glucose adsorption and bile acid binding. In conclusion, HE treatment possessed the potential to be applied as an excellent modification method, which improved the nutritional and economic value of tomato pomace.

Nanocellulose Hybrid Lignin Complex Reinforces Cellulose to Form a Strong, Water-Stable Lignin-Cellulose Composite Usable as a Plastic Replacement

The significant challenges in the use of cellulose as a replacement for plastic are its mechanical properties' degradation and uncontrolled deformation during the rewetting process. Herein, inspired by the reinforcement of cellulose by lignin in natural plant tissue, a strong and water-stable lignin-cellulose composite (LCC) was developed. A nanocellulose hybrid lignin complex (CHLC) created from bagasse residue after enzymatic hydrolysis was added into a pulp of bleached fibre extracted from pine to produce a lignin-cellulose sheet. The lignin as a water-stable reinforcing matrix, via the hydrogen bonding of the nanocellulose in the CHLC with the fibre was efficiently introduced onto the fibres and the fibre network voids. Compared with a typical lignin-free cellulose sheet, the dry strength and wet strength of the LCC were 218% and 2233% higher, respectively. The developed LCC is an eco-friendly and biodegradable alternative to plastic.

Thermostable Cellulases / Xylanases From Thermophilic and Hyperthermophilic Microorganisms: Current Perspective

The bioconversion of lignocellulose into monosaccharides is critical for ensuring the continual manufacturing of biofuels and value-added bioproducts. Enzymatic degradation, which has a high yield, low energy consumption, and enhanced selectivity, could be the most efficient and environmentally friendly technique for converting complex lignocellulose polymers to fermentable monosaccharides, and it is expected to make cellulases and xylanases the most demanded industrial enzymes. The widespread nature of thermophilic microorganisms allows them to proliferate on a variety of substrates and release substantial quantities of cellulases and xylanases, which makes them a great source of thermostable enzymes. The most significant breakthrough of lignocellulolytic enzymes lies in lignocellulose-deconstruction by enzymatic depolymerization of holocellulose into simple monosaccharides. However, commercially valuable thermostable cellulases and xylanases are challenging to produce in high enough quantities. Thus, the present review aims at giving an overview of the most recent thermostable cellulases and xylanases isolated from thermophilic and hyperthermophilic microbes. The emphasis is on recent advancements in manufacturing these enzymes in other mesophilic host and enhancement of catalytic activity as well as thermostability of thermophilic cellulases and xylanases, using genetic engineering as a promising and efficient technology for its economic production. Additionally, the biotechnological applications of thermostable cellulases and xylanases of thermophiles were also discussed.

Tandem Character of Liquid Hot Water and Deep Eutectic Solvent to Enhance Lignocellulose Deconstruction

Pretreatment with efficient fractionation, eco-friendliness, and low-cost brings high security to future biorefinery systems. Synergistic pretreatment is a compelling blueprint to tackle the compact structure of lignocellulose towards a high-level valorization. Here, a stepwise approach was designed using hydrothermal and deep eutectic solvent (DES) pretreatments to hierarchically extract hemicelluloses and lignin from poplar, while delivering a cellulose-rich substrate that could easily undergo enzymatic hydrolysis to obtain fermentable glucose and residual lignin. The lifetime of recyclable DES showed that the pretreatment efficiency was still largely maintained after the fourth recycling. An enhancement of enzymatic digestibility from 13.9 to 90.4 % was initiated by the deconstruction of amorphous portions and robust cell wall. 23.7 % Xylooligosaccharides (degree of polymerization 2-6), 47.5 % DES-isolated lignin, and 19.2 % cellulose enzymatic lignin were harvested via this coupled process. This study could promote the precise design of sustainable tandem pretreatment that can boost the frontier of highly available biorefinery.