Fabrication and characterization of biodegradable KH560 crosslinked chitin hydrogels with high toughness and good biocompatibility

High-Performance Composite Membranes: Embedding Yttria-Stabilized Zirconia in Polyphenylene Sulfide Fabric for Enhanced Alkaline Water Electrolysis Efficiency

Due to their excellent alkali resistance and chemical stability, polyphenylene sulfide (PPS) fabric membranes are widely used in alkaline water electrolysis (AWE) for hydrogen production. However, traditional PPS membranes suffer from poor hydrophilicity, low airtightness, and high area resistance, resulting in high energy consumption and reduced safety in industrial applications. This study addresses the aforementioned issues by coupling 3-(2,3-epoxy propoxy) propyl trimethoxy silane (KH560) via self-condensation to the PPS membrane and blending it with self-synthesized yttrium-stabilized zirconia nanoparticles (YSZNPs). The YSZNPs are loaded onto the modified PPS fiber surface through dip-coating and hot-pressing processes, forming a micro-mechanical interlocking structure that enhances the overall performance of the membrane in practical hydrogen production applications. The findings indicate that the developed composite membrane demonstrate outstanding hydrophilicity, minimal area resistance (0.21 Ω cm2), and elevated bubble point pressure (2.93224 bar). Significantly, tests on gas purity indicate that the produced hydrogen and oxygen attain purities of 99.90% and 99.75%, respectively, when evaluated at a current density of 1.5 A cm-2. Moreover, after 500 h of electrolysis testing in a simulated industrial environment, minimal decline in membrane performance is observed, highlighting the competitive edge of this composite membrane in the current AWE market.

Advancing wound healing by hydrogel-based dressings loaded with cell-conditioned medium: a systematic review

BACKGROUND

Wound healing represents a complex biological process, critically important in clinical practice due to its direct implication in a patient's recovery and quality of life. Conservative wound management frequently falls short in providing an ideal environment for the optimal tissue regeneration, often resulting in extended healing periods and elevated risk of infection and other complications. The emerging biomaterials, particularly hydrogels, have shown substantial promise in addressing these challenges by offering properties such as biocompatibility, biodegradability, and the ability to cure wound environment. Recent advancements have highlighted the therapeutic potential of integrating cell-derived conditioned medium (CM) into hydrogel matrices. Cell-derived CM represents a rich array of bioactive molecules, demonstrating significant efficacy in modulating cellular activities crucial for wound healing, including cellular proliferation, migration, and angiogenesis.

METHODS

The methodology of this review adheres to the standards set by the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines. The review includes a selection of studies published within the last five years, focusing on in vivo experiments involving various types of skin injuries treated with topically applied hydrogels loaded with CM (H-CM). The search strategy refers to the PICO framework and includes the assessment of study quality by CAMARADES tool.

RESULTS

The systematic review represents a detailed evaluation of H-CM dressings wound healing efficiency based on the experimental results of cell-based assays and animal wound models. The study targets to reveal wound healing capacity of H-CM dressings, and provides a comparative data analysis, limitations of methods and discussions of H-CM role in advancing the wound healing therapy.

CONCLUSIONS

The data presented demonstrate that H-CM is a promising material for advanced wound healing and regenerative medicine. These dressings possess proved in vitro/in vivo efficacy that highlights their strong clinical potential and paves the way to further investigations of H-CM formulations within clinical trials.

Multifunctional Hydrogels Based on γ-Polyglutamic Acid/Polyethyleneimine for Hemostasis and Wound Healing

Current hemostatic materials have many shortcomings, such as biotoxicity or poor degradability, and do not effectively promote wound healing after hemostasis. To address these limitations, a hemostasis-promoting wound-healing hydrogel, polyglutamic acid/polyethyleneimine/montmorillonite (PPM), comprising polyglutamic acid, 3,4-dihydroxybenzaldehyde-modified polyethyleneimine, and amino-modified montmorillonite (montmorillonite-NH2) was constructed in this study. Due to the excellent water absorption abilities of γ-polyglutamic acid, the PPM and polyglutamic acid/polyethyleneimine hydrogels could rapidly absorb the blood and tissue fluid exuded from the wound to keep the wound clean and accelerate the blood coagulation. The homogeneous distribution of montmorillonite-NH2 enhanced not only the mechanical properties of the hydrogel but also its hemostatic properties. In addition, the modification of polyethylenimine with 3,4-dihydroxybenzaldehyde provided anti-inflammatory effects and endorsed the wound healing. Cellular and blood safety experiments demonstrated the biocompatibility of the PPM hydrogel, and animal studies demonstrated that the PPM hydrogel effectively stopped bleeding and promoted wound healing. The concept design of clay-based hydrogel may create diverse opportunities for constructing hemostasis and wound-healing dressings.

Effect of molecular weight of PEI on the strength and hydrophobic performance of fiber-based papers via PEI-KH560 surface sizing

In recent years, researchers have put much attention on the improvements and upgrades of novel wet strength agent in the papermaking fields, especially in the usage of household paper. Herein, PEIM-KH560 by polyethyleneimine (PEI) and γ-glycidyl ether propyl trimethoxysilane (KH560) was synthesized with five molecular weights (Mw) of PEI at 600, 1800, 10,000, 70,000 and 750,000. Results showed that the molecular weight greatly influenced the physicochemical properties of PEI-KH560, such as the size and thermal stability. The intrinsic cationic charge of PEI-KH560 provided the bonding sites with the paper fibers, forming strengthened fiber-fiber joints. It was shown that the dry, wet strength and hydrophobicity of cellulosic paper sheets were obviously improved. When the m (PEI):m(KH560) is 1:2, the strength of papers after sizing by Mw of PEI at 600 and 1800 is the most obvious, with the dry strength increased by 227.9 % and 187.5 %, and the wet strength increased by 183.8 % and 207.8 %, respectively. The maximum hydrophobicity was found at the PEI1800-KH560 with the contact angle value of 130.6°. The resultant environmental-friendly agent (PEI-KH560) obtained in this work provides valuable significance for the preparation of household and food packaging paper.

Preparation and Immobilization Mechanism on a Novel Composite Carrier PDA-CF/PUF to Improve Cells Immobilization and Xylitol Production

The preparation of a novel composite carrier of polydopamine-modified carbon fiber/polyurethane foam (PDA-CF/PUF) was proposed to improve cell immobilization and the fermentation of xylitol, which is an important food sweetener and multifunctional food additive. Candida tropicalis was immobilized on the composite carrier by adsorption and covalent binding. The properties and immobilization mechanism of the composite carrier and its effect on immobilized cells were investigated. It showed that the modification of PDA enhanced the loading of CF on the PUF surface and the adhesion of cells on the composite carrier surface. Also, the biocompatibility of carriers to cells was improved. In addition, the introduction of PDA increased the active groups on the surface of the carrier, enhanced the hydrophilicity, promoted the cells immobilization, and increased the xylitol yield. It was also found that expression of the related gene XYL1 in cells was significantly increased after the immobilization of the PDA-CF/PUF composite carrier during the fermentation. The PDA-CF/PUF was an immobilized carrier with the excellent biocompatibility and immobilization performance, which has great development potential in the industrial production of xylitol.

Recent Advances in Environmentally Friendly Dual-crosslinking Polymer Networks

Environmentally friendly crosslinked polymer networks feature degradable covalent or non-covalent bonds, with many of them manifesting dynamic characteristics. These attributes enable convenient degradation, facile reprocessibility, and self-healing capabilities. However, the inherent instability of these crosslinking bonds often compromises the mechanical properties of polymer networks, limiting their practical applications. In this context, environmentally friendly dual-crosslinking polymer networks (denoted EF-DCPNs) have emerged as promising alternatives to address this challenge. These materials effectively balance the need for high mechanical properties with the ability to degrade, recycle, and/or self-heal. Despite their promising potential, investigations into EF-DCPNs remain in their nascent stages, and several gaps and limitations persist. This Review provides a comprehensive overview of the synthesis, properties, and applications of recent progress in EF-DCPNs. Firstly, synthetic routes to a rich variety of EF-DCPNs possessing two distinct types of dynamic bonds (i.e., imine, disulfide, ester, hydrogen bond, coordination bond, and other bonds) are introduced. Subsequently, complex structure- and dynamic nature-dependent mechanical, thermal, and electrical properties of EF-DCPNs are discussed, followed by their exemplary applications in electronics and biotechnology. Finally, future research directions in this rapidly evolving field are outlined.

Hydrogels based on seafood chitin: From extraction to the development

Chitin is extensively applied in vast applications due to its excellent biological properties, such as biodegradable and non-toxic. About 50 % of waste generated during seafood processing is chitin. Conventionally, chitin is extracted via chemical method. However, it has many shortcomings. Many novel extraction methods have emerged, including enzymatic hydrolysis, microbial fermentation, ultrasonic or microwave-assisted, ionic liquids, and deep eutectic solvents. Chitin and its derivatives-based hydrogels have attracted much attention due to their excellent properties. Nevertheless, they all have many limitations. Therefore, the preparation and application of chitin and its derivatives-based hydrogels are still facing great challenges. This review focuses on the challenges and prospects for sustainable chitin extraction from seafood waste and the preparation and application of chitin and its derivatives-based hydrogels. First section summarizes the mechanism and application of several methods of extracting chitin. The different extraction methods were evaluated from the aspects of yield, degree of acetylation, and protein and mineral residuals. The shortcomings of the extraction methods are also discussed. Next section summarizes the preparation and application of chitin and its derivatives-based hydrogels. Overall, we hope this mini-review can provide a practical reference for selecting chitin extraction methods from seafood and applying chitin and its derivatives-based hydrogels.

Fabrication of porous adsorbent by quinoa husk stabilized foam templates for dye adsorption and carbonization for soil remediation

In this study, a novel adsorbent with a sufficient porous structure was fabricated using a green and highly stable water-based foam template. This template was stabilized with agricultural waste quinoa husk (QH) and applied to remove dye pollutants in wastewater. The porous adsorbent exhibited a high adsorption capacity of 740.95 mg/g for methylene blue and 1022.1 mg/g for methyl violet. The adsorption process was well described by the Langmuir-Freundlich model and the pseudo second-order kinetic model. A sustainable concept for handling the spent adsorbent was also proposed, involving its conversion into biochar and safe return to the soil. An additional benefit was observed, as the biochar effectively adjusted the physicochemical properties of the soil and improved crop growth with the addition of 1 wt%. The potential application of porous adsorbent in wastewater treatment and the reference of sustainable strategy for disposing of other adsorbents are both noteworthy.

Tailoring the Swelling-Shrinkable Behavior of Hydrogels for Biomedical Applications

Hydrogels with tailor-made swelling-shrinkable properties have aroused considerable interest in numerous biomedical domains. For example, as swelling is a key issue for blood and wound extrudates absorption, the transference of nutrients and metabolites, as well as drug diffusion and release, hydrogels with high swelling capacity have been widely applicated in full-thickness skin wound healing and tissue regeneration, and drug delivery. Nevertheless, in the fields of tissue adhesives and internal soft-tissue wound healing, and bioelectronics, non-swelling hydrogels play very important functions owing to their stable macroscopic dimension and physical performance in physiological environment. Moreover, the negative swelling behavior (i.e., shrinkage) of hydrogels can be exploited to drive noninvasive wound closure, and achieve resolution enhancement of hydrogel scaffolds. In addition, it can help push out the entrapped drugs, thus promote drug release. However, there still has not been a general review of the constructions and biomedical applications of hydrogels from the viewpoint of swelling-shrinkable properties. Therefore, this review summarizes the tactics employed so far in tailoring the swelling-shrinkable properties of hydrogels and their biomedical applications. And a relatively comprehensive understanding of the current progress and future challenge of the hydrogels with different swelling-shrinkable features is provided for potential clinical translations.

Synthesis and Applications of Hybrid Polymer Networks Based on Renewable Natural Macromolecules

Macromolecules obtained from renewable natural sources are gaining increasing attention as components for a vast variety of sustainable polymer-based materials. Natural raw materials can facilitate continuous-flow production due to their year-round availability and short replenishment period. They also open new opportunities for chemists and biologists to design and create "bioreplacement" and "bioadvantaged" polymers, where complex structures produced by nature are being modified, upgraded, and utilized to create novel materials. Bio-based macromonomers are expected not only to compete with but to replace some petroleum-based analogs, as well. The development of novel sustainable materials is an ongoing and very dynamic process. There are multiple strategies for transforming natural macromolecules into sophisticated value-added products. Some methods include chemical modification of macromolecules, while others include blending several components into one new system. One of the most promising approaches for incorporating renewable macromolecules into new products is the synthesis of hybrid networks based on one or more natural components. Each one has unique characteristics, so its incorporation into a network brings new sustainable materials with properties that can be tuned according to their end-use. This article reviews the current state-of-the-art and future potential of renewable natural macromolecules as sustainable building blocks for the synthesis and use of hybrid polymer networks. The most recent advancements and applications that involve polymers, such as cellulose, chitin, alginic acid, gellan gum, lignin, and their derivatives, are discussed.

Peptide hydrogels: Synthesis, properties, and applications in food science

Due to the unique and excellent biological, physical, and chemical properties of peptide hydrogels, their application in the biomedical field is extremely wide. The applications of peptide hydrogels are closely related to their unique responsiveness and excellent properties. However, its defects in mechanical properties, stability, and toxicity limit its application in the food field. In this review, we focus on the fabrication methods of peptide hydrogels through the physical, chemical, and biological stimulations. In addition, the functional design of peptide hydrogels by the incorporation with materials is discussed. Meanwhile, the excellent properties of peptide hydrogels such as the stimulus responsiveness, biocompatibility, antimicrobial properties, rheology, and stability are reviewed. Finally, the application of peptide hydrogel in the food field is summarized and prospected.

High-strength, antibacterial, antioxidant, hemostatic, and biocompatible chitin/PEGDE-tannic acid hydrogels for wound healing

Natural polymer hydrogels are widely used in various aspects of biomedical engineering, such as wound repair, owing to their abundance and biosafety. However, the low strength and the lack of function restricted their development and application scope. Herein, we fabricated novel multifunctional chitin/PEGDE-tannic acid (CPT) hydrogels through chemical- and physical-crosslinking strategies, using chitin as the base material, polyethylene glycol diglycidyl ether (PEGDE) and tannic acid (TA) as crosslinking agents, and 90 % ethanol as the regenerative bath. CPT hydrogels maintained a stable three-dimensional porous structure with suitable water contents and excellent biocompatibility. The mechanical properties of hydrogels were greatly improved (tensile stress up to 5.43 ± 1.14 MPa). Moreover, CPT hydrogels had good antibacterial, antioxidant, and hemostatic activities and could substantially promote wound healing in a rat model of full-thickness skin defect by regulating inflammatory responses and promoting collagen deposition and blood vessel formation. Therefore, this work provides a useful strategy to fabricate novel multifunctional CPT hydrogels with excellent mechanical, antibacterial, antioxidant, hemostatic, and biocompatible properties. CPT hydrogels could be promising candidates for wound healing.

Interfacial assembly of chitin/Mn3O4 composite hydrogels as photothermal antibacterial platform for infected wound healing

To combat bacteria and even biofilm infections, developing alternative antibacterial wound dressings independent of antibiotics is imperative. Herein, this study developed a series of bioactive chitin/Mn₃O₄ composite hydrogels under mild conditions for infected wound healing application. The in situ synthesized Mn₃O₄ NPs homogeneously distribute throughout chitin networks and strongly interact with chitin matrix, and as well as endow the chitin/Mn₃O₄ hydrogels with NIR-assisted outstanding photothermal antibacterial and antibiofilm activities. Meantime, the chitin/Mn₃O₄ hydrogels exhibit favorable biocompatibility and antioxidant property. Furthermore, the chitin/Mn₃O₄ hydrogels with the assist of NIR show an excellent skin wound healing performance in a mouse full-thickness S. aureus biofilms-infected wound model, by accelerating the phase transition from inflammation to remodeling. This study broadens the scope for the fabrication of chitin hydrogels with antibacterial property, and offers an excellent alternative for the bacterial-associated wound infection therapy.

Synthesis and evaluation of water-soluble imidazolium salt chitin with broad-spectrum antimicrobial activity and excellent biocompatibility for infected wound healing

Infections caused by bacteria have long constituted a major threat to human health and the economy. Therefore, there is an urgent need to design broad-spectrum antibacterial materials possessing good biocompatibility to treat such infections. Herein, inspired by the good biocompatibility of chitin and antibacterial properties of imidazolium salts, a polysaccharide-based material, imidazolium salt chitin (IMSC), was homogeneously prepared using a facile method with epichlorohydrin as a chemical crosslinker to combine chitin with imidazole to enhance Staphylococcus aureus (S. aureus)-infected wound healing. The characteristics, antimicrobial properties, and biosafety of IMSC were evaluated. The results demonstrated successful grafting of imidazole onto chitin. Furthermore, IMSC exhibited good water solubility, broad-spectrum antimicrobial activity, hemocompatibility, and biocompatibility. Moreover, IMSC enabled complete healing of S. aureus-infected wound in Sprague-Dawley rats within 15 days of application, thus demonstrating that IMSC could reduce wound inflammation and remarkably accelerate wound healing owing to its efficient antibacterial activity and ability to promote collagen deposition in and around the wound area. Therefore, this study provides a promising and potential therapeutic strategy for infected wound healing by synthesizing a water-soluble and broad-spectrum antimicrobial material exhibiting good biocompatibility.

Biocompatible and biodegradable chitin-based hydrogels crosslinked by BDDE with excellent mechanical properties for effective prevention of postoperative peritoneal adhesion

Postoperative peritoneal adhesions are common complications caused by abdominal and pelvic surgery, which seriously impact the quality of life of patients and impose additional financial burdens. Using of biomedical materials as physical barriers to completely isolate the traumatic organ and injured tissue is an optimal strategy for preventing postoperative adhesions. However, the limited efficacy and difficulties in the complete degradation or integration of biomedical materials with living tissues restrict the application of these materials. In this study, novel chitin-based crosslinked hydrogels with appropriate mechanical properties and flexibilities were developed using a facile and green strategy. The developed hydrogels simultaneously exhibited excellent biocompatibilities and resistance to nonspecific protein adsorption and NIH/3T3 fibroblast adhesion. Furthermore, these hydrogels were biodegradable and could be completely integrated into the native extracellular matrix. The chitin-based crosslinked hydrogels also effectively inhibited postoperative peritoneal adhesions in rat models of adhesion and recurrence. Therefore, these novel chitin-based crosslinked hydrogels are excellent candidate physical barriers for the efficient prevention of postoperative peritoneal adhesions and provide a new anti-adhesion strategy for biomedical applications.

Heparosan-based self-assembled nanocarrier for zinc(II) phthalocyanine for use in photodynamic cancer therapy

Zinc(II) phthalocyanine (ZnPc) is a promising photosensitizer in photodynamic therapy (PDT) for melanoma treatment. However, the poor solubility of ZnPc limits its application. To overcome this limitation, heparosan (HP)-based nanoparticles were prepared by anchoring the l-lysine-linked α-linolenic acid branch to the carboxylic acid group to produce amphiphilic conjugates named heparosan with an l-lysine-linked α-linolenic acid branch (HLA). HLA conjugates could self-assemble into spherical nanoparticles in aqueous media and encapsulate ZnPc to form HLA-ZnPc nanoparticles. The cellular uptake of ZnPc could be improved by HLA carriers. These nanoparticles presented excellent photodynamic-mediated toxicity against mouse melanoma cells (B16) by markedly upregulating the intracellular reactive oxygen species (ROS) levels while showing no cytotoxicity to either B16 or normal cells (L02 and HK-2 cells) in the dark. Furthermore, HLA-ZnPc displayed excellent stability in both powder and Roswell Park Memorial Institute (RPMI) 1640 medium, indicating its promise for application in drug delivery and PDT. These results revealed a strategy for HP-based enhancement of ZnPc in PDT efficacy.

Sustainable, High-Performance, and Biodegradable Plastics Made from Chitin

A high-performance biodegradable plastic was made from a chitin KOH/urea solution. The solution was transferred into a hydrogel by cross-linking using epichlorohydrin and ethanol immersion, and a chitin bioplastic was finally prepared by drying in a mold at 40 °C. The solution concentration positively impacts viscosity, crystallinity, and smoothness. A 4% chitin bioplastic exhibits high barrier properties, flame retardancy, high-temperature resistance, mechanical properties (tensile strength up to 107.1 MPa), and soil degradation properties. The chitin bioplastic can be completely degraded by microorganisms in 7 weeks. In addition, biosafety tests suggest that chitin is safe for cells and crops (wheat and mung beans). The chitin bioplastic was further applied to containers, straws, cups, and photoprotection, and it was found that the water resistance and transparency were comparable to those of commercial polypropylene plastics. Due to the excellent performance, safety, and sustainability of the chitin bioplastic, it is expected to become a good substitute for conventional fossil fuel-based plastics.

Polysaccharide-based nanosystems: a review

Polysaccharide-based nanosystem is an umbrella term for many areas within research and technology dealing with polysaccharides that have at least one of their dimensions in the realm of a few hundreds of nanometers. Nanoparticles, nanocrystals, nanofibers, nanofilms, and nanonetworks can be fabricated from many different polysaccharide resources. Abundance in nature, cellulose, starch, chitosan, and pectin of different molecular structures are widely used to fabricate nanosystems for versatile industrial applications. This review presents the dissolution and modification of polysaccharides, which are influenced by their different molecular structures and applications. The dissolution ways include conventional organic solvents, ionic liquids, inorganic strong alkali and acids, enzymes, and hydrothermal treatment. Rheological properties of polysaccharide-based nano slurries are tailored for the purpose functions of the final products, e.g., imparting electrostatic functions of nanofibers to reduce viscosity by using lithium chloride and octenyl succinic acid to increase the hydrophobicity. Nowadays, synergistic effects of polysaccharide blends are increasingly highlighted. In particular, the reinforcing effect of nanoparticles, nanocrystals, nanowhiskers, and nanofibers to hydrogels, aerogels, and scaffolds, and the double network hydrogels of a rigid skeleton and a ductile substance have been developed for many emerging issues.

Effect of Amylose and Crystallinity Pattern on the Gelatinization Behavior of Cross-Linked Starches

Starches from normal maize (NM), normal potato (NP), waxy maize (WM), and waxy potato (WP) were cross-linked with seven different concentrations (0.01, 0.05, 0.1, 0.5, 1, 5, 10%) of sodium trimetaphosphate and sodium tripolyphosphate. The use of low-amylose WM and WP as well as A-crystalline maize and B-crystalline potato starches can determine the influence of the amylose content and crystallinity pattern on the cross-linking of starches. The results showed that the viscosity of the cross-linked starch (CLs) first increased and then deceased, and finally no viscosity was detected; WM showed no viscosity at 5% and NP at 1%. In addition, the viscosity of NM first increased and then became undetectable at 0.5%. Strikingly, the WP developed viscosity even at a 10% reagent level (RL), and it developed the highest viscosity of all samples at 1%. The starch-iodine method was a facile and high-performance method for the characterization of the cross-linking degree (CL%), having been applied to normal starches, because the increase in the CL% resulted in a decrease of iodine-complexed amylose and blue intensity. In this study, the starch-iodine method was extended to waxy starches, which stained brown with iodine, and the brown intensity decreased with the increase of the CL%. Moreover, the CL% and RL showed a linear-log relationship.

Recent advances on biomedical applications of pectin-containing biomaterials

There is a growing demand for biomaterials developing with novel properties for biomedical applications hence, hydrogels with 3D crosslinked polymeric structures obtained from natural polymers have been deeply inspected in this field. Pectin a unique biopolymer found in the cell walls of fruits and vegetables is extensively used in the pharmaceutical, food, and textile industries due to its ability to form a thick gel-like solution. Considering biocompatibility, biodegradability, easy gelling capability, and facile manipulation of pectin-based biomaterials; they have been thoroughly investigated for various potential biomedical applications including drug delivery, wound healing, tissue engineering, creation of implantable devices, and skin-care products.

A comparison study of hyaluronic acid hydrogel exquisite micropatterns with photolithography and light-cured inkjet printing methods

The microstructure design of hydrogel materials offers a broad range of practical applications and is extensively used in flexible sensors, polymer microneedles, microfluidic chips, and other biomedical engineering fields. Among the bio-sourced hydrogels, oligomeric hyaluronic acid (HA) possesses wound healing, anti-tumor, and angiogenesis properties. However, micropatterning soft hydrogels, such as HA-relative hydrogels containing 90% water by weight, continue to pose difficulties for both high precision and micro-scale lithography. The purpose of this study was to compare the photolithography and light-cured inkjet printing methods of methacryloyl HA hydrogel (HAMA-gel) to those for synthetic light-curable polymer resins. Photolithography and light-cured inkjet printing methods with designed scale, high resolution, and little processing times were used to effectively prepare micropatterns of HAMA-gel. The well-shaped micropatterns consisted of parallel channels in tens of micrometers and strip/grid lines in the hundreds of micrometers. Human vein endothelial cells cultured on the material’s surface demonstrated that HAMA-gel had good biocompatibility. The width of the flow channel (10 and 20 µm) was regulated on the surface of the microstructure to allow for simultaneous control of cell growth along the flow channel and groove directions.

A novel cationic graphene modified cyclodextrin adsorbent with enhanced removal performance of organic micropollutants and high antibacterial activity

The coexistence of pathogenic microorganisms and refractory organic chemicals in water nurtures certain biological and chemical risks to human beings and the water environment as a whole. For an environmentally friendly utilization of water cleaning and recycling technologies, a bifunctional cationic cyclodextrin material (GD-DTAC) with adsorption and bactericidal function was designed. By a simple crosslinking method, GD-DTAC was prepared with graphene supported citric acid-β-cyclodextrin polymer (GD) and dimethyldodecyl[3-(trimethoxysilyl)propyl]ammonium chloride (DTAC). Following the introduction of rich quaternary ammonium groups by DTAC, GD-DTAC realized a double regulation of surface positive charge and wettability. The maximum adsorption capacities of Roxarsone (ROX), Methyl Orange (MO) and Bisphenol A (BPA) were 153.59 mg/g, 445.60 mg/g and 237.90 mg/g, respectively. Antibacterial activity tests showed the efficiency of DTAC not only for enhanced adhesion resistance, but it also realized the sterilization function. This work displays the potential of the prepared bifunctional materials for the removal of pollutants from wastewater as well as the suppression of micro-pollutants. The successful preparation of GD-DTAC provided a basis for the bifunctional material, which showed a great potential in adsorption and antibiosis.

Toughening of Bioceramic Composites for Bone Regeneration

Bioceramics are widely considered as elective materials for the regeneration of bone tissue, due to their compositional mimicry with bone inorganic components. However, they are intrinsically brittle, which limits their capability to sustain multiple biomechanical loads, especially in the case of load-bearing bone districts. In the last decades, intense research has been dedicated to combining processes to enhance both the strength and toughness of bioceramics, leading to bioceramic composite scaffolds. This review summarizes the recent approaches to this purpose, particularly those addressed to limiting the propagation of cracks to prevent the sudden mechanical failure of bioceramic composites.

Preparation and characterization of a dual cross-linking injectable hydrogel based on sodium alginate and chitosan quaternary ammonium salt

The development of cheap and easily available injectable hydrogel is an urgent problem in the field of biomedical engineering. Herein, we used chitosan quaternary ammonium salt and sodium alginate to prepare a dual crosslinking hydrogel. The hydrogel formed in-situ crosslinking and can be injected continuously. Interestingly, the formed hydrogel possessed a homogeneous 3D network structure and exhibited reasonable mechanical properties. Moreover, the hydrogels had excellent injectability, and the compression strength of the hydrogel (Gel-0.5) was up to 27.65 kPa. Additionally, the hydrogel showed good biocompatibility that evaluated by cytotoxicity. Notably, the hydrogel was nontoxic toward NIH-3T3 cells. In summary, the hydrogel we produced can be used as an ideal biomaterial for further applications in the field of biomedical engineering.

Naturally Formed Chitinous Skeleton Isolated from the Marine Demosponge Aplysina fistularis as a 3D Scaffold for Tissue Engineering

Tissue engineering (TE) is a field of regenerative medicine that has been experiencing a special boom in recent years. Among various materials used as components of 3D scaffolds, naturally formed chitinous materials seem to be especially attractive because of their abundance, non-toxic and eco-friendly character. In this study, chitinous skeleton isolated from the marine sponge Aplysina fistularis (phylum: Porifera) was used for the first time as a support for the cultivation of murine fibroblasts (Balb/3T3), human dermal fibroblasts (NHDF), human keratinocyte (HaCaT), and human neuronal (SH-SY5Y) cells. Characterization techniques such as ATR FTIR, TGA, and μCT, clearly indicate that an interconnected macro-porous, thermostable, pure α-chitin scaffold was obtained after alkali–acid treatment of air-dried marine sponge. The biocompatibility of the naturally formed chitin scaffolds was confirmed by cell attachment and proliferation determined by various microscopic methods (e.g., SEM, TEM, digital microscopy) and specific staining. Our observations show that fibroblasts and keratinocytes form clusters on scaffolds that resemble a skin structure, including the occurrence of desmosomes in keratinocyte cells. The results obtained here suggest that the chitinous scaffold from the marine sponge A. fistularis is a promising biomaterial for future research about tissues regeneration.

Preparation of high-strength and high-toughness biomass medical films based on a polydopamine dynamically united calcium alginate/carboxymethyl chitosan dual network

A high-strength and high-toughness biomass medical film was prepared using a polydopamine dynamically united calcium alginate/carboxymethyl chitosan dual network.