Recent advances in lignocellulose prior-fractionation for biomaterials, biochemicals, and bioenergy

Ultrasound, pulsed electric fields, and high-voltage electrical discharges assisted extraction of cellulose and lignin from walnut shells

Extracting The extraction of cellulose and lignin from biomass is essential for the development of sustainable bio-based materials. This study examines the effects of physical pretreatment techniques-ultrasound (US), pulsed electric fields (PEF), and high-voltage electrical discharges (HVED)-on the efficiency of alkali treatment for cellulose and lignin extraction from walnut shells. The primary objective was to enhance extraction yields and improve extract quality while evaluating the effectiveness of these methods. The results revealed that the combined treatments achieved lignin and cellulose yields of up to 17.03 % and 33.40 %, respectively, with US and HVED showing significantly higher extraction efficiencies compared to other techniques. Characterization of the extracted materials using FTIR, XRD, 2D HSQC NMR, TGA/DTG, and DSC confirmed the presence of key functional groups, crystalline structures, and detailed molecular features, while also providing insights into thermal stability. These findings underscore the potential of walnut shells as a sustainable source for bio-based materials and demonstrate the influence of physical pretreatments on the structural and thermal properties of extracted cellulose and lignin. This study paves the way for further research into industrial applications, such as wood adhesives. Future work should focus on optimizing extraction processes, scaling up operations, and investigating the effects of biomass variability on extraction outcomes.

The swelling-induced fractionation strategy to mediate cellulose availability and lignin structural integrity

We report a facile fractionation strategy using choline hydroxide (ChOH) based alkaline deep eutectic solvents (DES) for whole-component upgrading of bagasse. Through selective lignin and xylan dissolution, along with extensive biomass swelling, high-value lignin-carbohydrate complexes (LCC, with high β-O-4 bond content of 68.9/100 Ar) and high-purity xylan were extracted without compromising cellulose recovery and hydrolysis. This work provided the key to solving the technical contradiction between cellulose availability and lignin structural integrity.

The Fungi-Bacteria Interaction Mechanism of Microbial Consortium During Efficient Lignin Degradation Based on Metabolomics Analysis

Microbial consortium degradation technology can improve the degradation efficiency and adaptability through fungi-bacteria synergism, but the mechanism of the fungi-bacteria interaction is still unclear, making it difficult to optimize the degradation process. The microbial consortium J-6, with high lignin degradation efficiency and strong environmental adaptability, was obtained in our previous research. In this study, the fungi-bacteria interacting mechanism of the microbial consortium J-6 was inferred based on metabolomics technology. The results showed that the positive interaction between fungi and bacteria could improve the efficiency of lignin degradation. The metabolites released by fungi, especially betanidin and ergosterol, had an impact on bacterial metabolism, promoted the degradation of macromolecules, and significantly increased the lignin degradation efficiency. Metabolites released by bacteria, especially L-phenylalanine and taurine, played a key role in fungal metabolism, leading to more complete degradation. The interaction mechanism of chemical currencies exchange between fungi and bacteria during lignin degradation obtained in this study can provide theoretical guidance for microbial consortium degradation technology.

Insights into the Lignocellulose-Degrading Enzyme System Based on the Genome Sequence of Flavodon sp. x-10

The efficient hydrolysis of lignocellulosic biomass relies on the action of enzymes, which are crucial for the development of economically feasible cellulose bioconversion processes. However, low hydrolysis efficiency and the inhibition of cellulase production by carbon catabolite repression (CCR) have been significant obstacles in this process. The aim of this study was to identify the patterns of cellulose degradation and related genes through the genome analysis of a newly isolated lignocellulose-degrading fungus Flavodon sp. x-10. The whole-genome sequencing showed that the genome size of Flavodon sp. x-10 was 37.1 Mb, with a GC content of 49.48%. A total of 11,277 genes were predicted, with a total length of 18,218,150 bp and an average length of 1615 bp. Additionally, 157 tRNA genes responsible for transporting different amino acids were predicted, and the repeats and tandem repeats accounted for only 0.76% of the overall sequences. A total of 5039 genes were annotated in the Kyoto Encyclopedia of Genes and Genomes (KEGG) database, representing 44.68% of all genes, and 368 metabolic pathways were involved. Of the 595 genes annotated in the carbohydrate-active enzyme (CAZy) database, 183 are associated with plant cell wall-degrading enzymes (PCWDEs), surpassing those of Aspergillus niger (167), Trichoderma reesei (64), and Neurospora crassa (86). Compared to these three fungi, Flavodon sp. x-10 has a higher number of enzyme genes related to lignin degradation in its genome. Transporters were further identified by matching the whole-genome sequence to the Transporter Classification Database (TCDB), which includes 20 sugar transporters (STs) closely linked to sugar utilization. Through the comprehensive exploration of the whole-genome sequence, this study uncovered more vital lignocellulase genes and their degradation mechanisms, providing feasible strategies for improving the strains to reduce the cost of biofuel production.

Valorization of rapeseed straw through the enhancement of cellulose accessibility, lignin removal and xylan elimination using an n-alkyltrimethylammonium bromide-based deep eutectic solvent

n-Alkyltrimethylammonium bromide (CnTAB)-based deep eutectic solvent (DESs) has potential in the efficient delignification and utilization of carbohydrates in biomass. In this research, DESs containing Brønsted acid and Lewis acid were prepared with CnTAB (alkyl-chain length 12-18), organic acids and metal chlorides, and the optimal treatment conditions were acquired by pretreatment optimization. Through the pretreatment with TTAB/LCA/Fe3+ (1:4:0.0111, mol:mol:mol) (162.5 °C, 61.7 min), lignin (89.2 %) and xylan (77.9 %) were effectively eliminated, and the hydrophobicity of rapeseed straw substantially declined from 4.62 to 2.09 m2/g, acquiring the highest enzymatic saccharification efficiency of 92.5 %. The relationship of DES properties and enzymatic saccharification efficiency was explored. Additionally, hemicellulose in rapeseed straws could be efficiently transformed into furfural (3.75 g/L) and xylo-oligosaccharides (3.64 g/L). To clarify the structural and property changes brought by pretreatment, rapeseed straws were testified by FT-IR, SEM and CLSM and deeply discussed. The interaction between lignocellulose and TTAB/LCA/Fe3+ was elucidated by molecular dynamics simulations and quantum chemical calculations, explaining the effectual treatment performance and hemicellulose upgrading at the molecular level. Eventually, a potential pretreatment mechanism of TTAB/LCA/Fe3+ was proposed. This established TTAB/LCA/Fe3+ treatment holds great promise for valorization of biomass into biofuels and biobased chemicals.

Producing D-Ribose from D-Xylose by Demonstrating a Pentose Izumoring Route

D-Ribose plays fundamental roles in all living organisms and has been applied in food, cosmetics, health care, and pharmaceutical sectors. At present, D-ribose is predominantly produced by microbial fermentation based on the pentose phosphate pathway (PPP). However, this method suffers from a long synthetic pathway, severe growth defect of the host cell, and carbon catabolite repression (CCR). According to the Izumoring strategy, D-ribose can be produced from D-xylose through only three steps. Being not involved in the growth defect or CCR, this shortcut route is promising to produce D-ribose efficiently. However, this route has never been demonstrated in engineering practice, which hinders its application. In this study, we stepwise demonstrated this route and screened out higher active enzymes for each step. The first D-ribose production from D-xylose through the Izumoring route was achieved. By stepwise enzyme dosage tuning and process optimization, 6.87 g/L D-ribose was produced from 40 g/L D-xylose. Feeding D-xylose further improved the D-ribose titer to 9.55 g/L. Finally, we tested the coproduction of D-ribose and D-allose from corn stalk hydrolysate using the route engineered herein. In conclusion, this study demonstrated a pentose Izumoring route, complemented the engineering practices of the Izumoring strategy, paved the way to produce D-ribose from D-xylose, and provided an approach to comprehensively utilize the lignocellulosic sugars.

From sugars to aliphatic amines: as sweet as it sounds? Production and applications of bio-based aliphatic amines

Aliphatic amines encompass a diverse group of amines that include alkylamines, alkyl polyamines, alkanolamines and aliphatic heterocyclic amines. Their structural diversity and distinctive characteristics position them as indispensable components across multiple industrial domains, ranging from chemistry and technology to agriculture and medicine. Currently, the industrial production of aliphatic amines is facing pressing sustainability, health and safety issues which all arise due to the strong dependency on fossil feedstock. Interestingly, these issues can be fundamentally resolved by shifting toward biomass as the feedstock. In this regard, cellulose and hemicellulose, the carbohydrate fraction of lignocellulose, emerge as promising feedstock for the production of aliphatic amines as they are available in abundance, safe to use and their aliphatic backbone is susceptible to chemical transformations. Consequently, the academic interest in bio-based aliphatic amines via the catalytic reductive amination of (hemi)cellulose-derived substrates has systematically increased over the past years. From an industrial perspective, however, the production of bio-based aliphatic amines will only be the middle part of a larger, ideally circular, value chain. This value chain additionally includes, as the first part, the refinery of the biomass feedstock to suitable substrates and, as the final part, the implementation of these aliphatic amines in various applications. Each part of the bio-based aliphatic amine value chain will be covered in this Review. Applying a holistic perspective enables one to acknowledge the requirements and limitations of each part and to efficiently spot and potentially bridge knowledge gaps between the different parts.

Efficient calcium fumarate overproduction from xylose and corncob-derived xylose by engineered strains of Aureobasidium pullulans var. Aubasidani DH177

BACKGROUND

Xylose from lignocellulose is one of the most abundant and important renewable and green raw materials. It is very important how to efficiently transform xylose into useful bioproducts such as fumaric acid and so on.

RESULTS

In this study, it was found that the GC1 strain (∆gox, in which the GOX gene encoding glucose oxidase which could transform glucose into gluconic acid was removed) of A. pullulans var. aubasidani DH177 had the high ability to utilize xylose and corncob-derived xylose with CO2 fixation derived from CaCO3 to produce calcium fumarate. Overexpression of the XI gene encoding xylose isomerase, the XK gene encoding xylose kinase and the TKL gene coding for transketolase made the strain TKL-4 produce 73.1 g/L of calcium fumarate from xylose. At the same time, the transcriptional levels of the key ASS gene coding for argininosuccinate synthase and the ASL gene coding for argininosuccinate lyase in the ornithine-urea cycle (OUC) were also obviously enhanced. The results also demonstrated that the TKL-4 strain could produce more calcium fumarate from xylose and corncob-derived xylose than from glucose. During 10-liter fermentation, the TKL-4 strain could produce 88.5 g/L of calcium fumarate from xylose, the productivity was 0.52 g/h/L. Meanwhile, it could yield 85.6 g/L of calcium fumarate from corncob-derived xylose and the productivity was 0.51 g/h/L. During the same fermentation, the TKL-4 strain could transform the mixture containing 75.0 g/L glucose and 45.0 g/L xylose to produce 78.7 ± 1.1 g/L calcium fumarate.

CONCLUSIONS

This indicated that the TKL-4 strain constructed in this study indeed could actively transform xylose and corncob-derived xylose into calcium fumarate through the green ways.

Lignin extraction from lignocellulosic biomass and its valorization to therapeutic phenolic compounds

Lignocellulosic biomass is a sustainable alternative to finite petroleum resources, with lignin emerging as a major component of biomass for producing circular economy products. Maximizing extraction and valorization of lignin to platform chemicals, biofuels, and bioactive compounds is crucial. Unlocking lignin's full potential lies in exploring the therapeutic properties of lignin-derived phenolics, which can definitely boost the economic viability of integrated biorefineries. This review provides a broad vision of lignin valorization stages, covering various techniques of its extraction from lignocellulosic biomass with high yield and purity and its further depolymerization to phenolics. Therapeutic potential of lignin-derived phenols as antioxidants, antimicrobials, anti-inflammatory, and anticancer agents is comprehensively discussed. Lignin, with high phenolic hydroxyl content up to 97% purity, can be extracted using deep eutectic solvents (DES) and organosolv processes. Oxidative and reductive catalytic depolymerization methods efficiently break down lignin into valuable phenolic compounds like alkyl phenolics and vanillin, even at mild temperatures, making them a preferred choice for lignin valorization. Potential of lignin derived phenolics as versatile bioactive compounds with health promoting benefits is highlighted. Phenolics such as vanillin, ferulic acid, and syringic acid have demonstrated the ability to modulate cellular pathways involved in the pathogenesis of diseases like cancer and diabetes. The interplay between high purity lignin extraction and therapeutic potential of lignin-derived phenolics unveils a new frontier in sustainable healthcare solutions.

Utilization of benzoic acid-based green deep eutectic solvents for the fractionation of lignocellulosic biomass

The fractionation of lignocellulose utilizing green solvents is essential for the effective operation of biorefineries. In this study, a deep eutectic solvent (DES) system composed of benzoic acid (BA, hydrogen bond donor) and choline chloride (ChCl, hydrogen bond acceptor) was fabricated and successfully applied to the lignocellulose fractionation. The DES has low toxicity and little pollution. In this system, 67.8 % of lignin and 91.2 % of hemicellulose in poplar were removed, leaving 95.8 % of cellulose intact as solid residue. Due to the removal of the amorphous components, crystallinity of cellulose-rich water-insoluble solid (CIS) substantially increased from 55.6 % to 68.6 %, and CIS was used as feedstock for nanocrystalline cellulose preparation with excellent properties. The results showed that the obtained lignin had similar properties to CEL by GPC, FT-IR, 2D-NMR and TGA. A high-purity lignin rich in G units was recovered with a well-preserved structure, which has β-O-4 linkage content up to 53.01 %, low molecular weight, low polydispersity (1.99). Finally, the hydrolyzate can be used for fermentation. This study demonstrated that BA is suitable for DES design with excellent properties on lignin extraction, and this promising DES enable efficient pretreatment for economically feasible biomass conversion. This ChCl-BA DES facilitates environmentally friendly production of functional materials derived from cellulose and lignin under mild conditions.

Research advances on the consolidated bioprocessing of lignocellulosic biomass

Lignocellulosic biomass is an abundant and renewable bioresource for the production of biofuels and biochemical products. The classical biorefinery process for lignocellulosic degradation and conversion comprises three stages, i.e., pretreatment, enzymatic saccharification, and fermentation. However, the complicated pretreatment process, high cost of cellulase production, and insufficient production performance of fermentation strains have restricted the industrialization of biorefinery. Consolidated bioprocessing (CBP) technology combines the process of enzyme production, enzymatic saccharification, and fermentation in a single bioreactor using a specific microorganism or a consortium of microbes and represents another approach worth exploring for the production of chemicals from lignocellulosic biomass. The present review summarizes the progress made in research of CBP technology for lignocellulosic biomass conversion. In this review, different CBP strategies in lignocellulose biorefinery are reviewed, including CBP with natural lignocellulose-degrading microorganisms as the chassis, CBP with biosynthetic microorganisms as the chassis, and CBP with microbial co-culturing systems. This review provides new perspectives and insights on the utilization of low-cost feedstock lignocellulosic biomass for production of biochemicals.

Composition of Lignocellulose Hydrolysate in Different Biorefinery Strategies: Nutrients and Inhibitors

The hydrolysis and biotransformation of lignocellulose, i.e., biorefinery, can provide human beings with biofuels, bio-based chemicals, and materials, and is an important technology to solve the fossil energy crisis and promote global sustainable development. Biorefinery involves steps such as pretreatment, saccharification, and fermentation, and researchers have developed a variety of biorefinery strategies to optimize the process and reduce process costs in recent years. Lignocellulosic hydrolysates are platforms that connect the saccharification process and downstream fermentation. The hydrolysate composition is closely related to biomass raw materials, the pretreatment process, and the choice of biorefining strategies, and provides not only nutrients but also possible inhibitors for downstream fermentation. In this review, we summarized the effects of each stage of lignocellulosic biorefinery on nutrients and possible inhibitors, analyzed the huge differences in nutrient retention and inhibitor generation among various biorefinery strategies, and emphasized that all steps in lignocellulose biorefinery need to be considered comprehensively to achieve maximum nutrient retention and optimal control of inhibitors at low cost, to provide a reference for the development of biomass energy and chemicals.

Expression of cellobiose dehydrogenase gene in Aspergillus niger C112 and its effect on lignocellulose degrading enzymes

Cellobiose dehydrogenase (CDH) is one of the cellulase auxiliary proteins, which is widely used in the field of biomass degradation. However, how to efficiently and cheaply apply it in industrial production still needs further research. Aspergillus niger C112 is a significant producer of cellulase and has a relatively complete lignocellulose degradation system, but its CDH activity was only 3.92 U. To obtain a recombinant strain of A. niger C112 with high cellulases activity, the CDH from the readily available white-rot fungus Grifola frondose had been heterologously expressed in A. niger C112, under the control of the gpdA promoter. After cultivation in the medium with alkali-pretreated poplar fiber as substrate, the enzyme activity of recombinant CDH reached 36.63 U/L. Compared with the original A. niger C112, the recombinant A. niger transformed with Grifola frondosa CDH showed stronger lignocellulase activity, the activities of cellulases, β-1, 4-glucosidase and manganese peroxidase increased by 28.57, 35.07 and 121.69%, respectively. The result showed that the expression of the gcdh gene in A. niger C112 could improve the activity of some lignocellulose degrading enzymes. This work provides a theoretical basis for the further application of gcdh gene in improving biomass conversion efficiency.

A concerted enzymatic de-structuring of lignocellulosic materials using a compost-derived microbial consortia favoring the consolidated pretreatment and bio-saccharification

The robustness of microbial consortia isolated from compost habitat encompasses the complementary metabolism that aids in consolidated bioprocessing (CBP) of lignocellulosic biomass (LCB) by division of labor across the symbionts. Composting of organic waste is deemed to be an efficient way of carbon recycling, where the syntrophic microbial population exerts a concerted action of lignin and polysaccharide (hemicellulose and cellulose) component of plant biomass. The potential of this interrelated microorganism could be enhanced through adaptive laboratory evolution (ALE) with LCB for its desired functional capabilities. Therefore, in this study, microbial symbionts derived from organic compost was enriched on saw dust (SD) (woody biomass), aloe vera leaf rind (AVLR) (agro-industrial waste) and commercial filter paper (FP) (pure cellulose) through ALE under different conditions. Later, the efficacy of enriched consortium (EC) on consolidated pretreatment and bio-saccharification was determined based on substrate degradation, endo-enzymes profiling and fermentable sugar yield. Among the treatment sets, AVLR biomass treated with EC-5 has resulted in the higher degradation rate of lignin (47.01 ± 0.66%, w/w) and polysaccharides (45.87 ± 1.82%, w/w) with a total sugar yield of about 60.01 ± 4.24 mg/g. In addition, the extent of structural disintegration of substrate after EC-treatment was clearly deciphered by FTIR and XRD analysis. And the factors of Pearson correlation matrix reinforces the potency of EC-5 by exhibiting a strong positive correlation between AVLR degradation and the sugar release. Thus, a consortium based CBP could promote the feasibility of establishing a sustainable second generation biorefinery framework.

Recent advances and future perspective on lignocellulose-based materials as adsorbents in diverse water treatment applications

The growing shortage of non-renewable resources and the burden of toxic pollutants in water have gradually become stumbling blocks in the path of sustainable human development. To this end, there has been great interest in finding renewable and environmentally friendly materials to promote environmental sustainability and combat harmful pollutants in wastewater. Of the many options, lignocellulose, as an abundant, biocompatible and renewable material, is the most attractive candidate for water remediation due to the unique physical and chemical properties of its constituents. Herein, we review the latest research advances in lignocellulose-based adsorbents, focusing on lignocellulosic composition, material modification, application of adsorbents. The modification and preparation methods of lignin, cellulose and hemicellulose and their applications in the treatment of diverse contaminated water are systematically and comprehensively presented. Also, the detailed description of the adsorption model, the adsorption mechanism and the adsorbent regeneration technique provides an excellent reference for understanding the underlying adsorption mechanism and the adsorbent recycling. Finally, the challenges and limitations of lignocellulosic adsorbents are evaluated from a practical application perspective, and future developments in the related field are discussed. In summary, this review offers rational insights to develop lignocellulose-based environmentally-friendly reactive materials for the removal of hazardous aquatic contaminants.

Employing deep eutectic solvent synthesized by cetyltrimethylammonium bromide and ethylene glycol to advance enzymatic hydrolysis efficiency of rape straw

An efficient deep eutectic solvent (DES) was synthesized by cetyltrimethylammonium bromide (CTAB) and ethylene glycol (EG) and employed to treat rape straw (RS) for advancing enzymatic saccharification in this work. By optimizing the pretreatment parameters, the results displayed that the novel DES was strongly selective towards removing lignin and xylan while preserving cellulose. Under optimum conditions with 1:6 of CTAB: EG in DES, 180 °C and 80 min, the enzymatic hydrolysis efficiency of RS was enhanced by 46.0% due to the 62.2% of delignification and 53.2% of xylan removal during CTAB: EG pretreatment. In terms of the recalcitrant structure of RS, DES pretreatment caused the increment of cellulosic accessibility, reduction of hydrophobicity and surface area of lignin, and migration of cellulosic crystalline structure, which was associated with its enzymatic hydrolysis efficiency. Overall, this study presented an emerging method for the effective fractionation and valorization of lignocellulosic biomass within biorefinery technology.

Enhancing cellulosic digestibility of wheat straw by adding sodium lignosulfonate and sodium hydroxide to hydrothermal pretreatment

Surfactant-assisted pretreatment has been widely reported to improve the enzymatic hydrolysis of lignocellulose by promoting removal of xylan and lignin. Hence, this work innovatively proposed the use of sodium lignosulfonate (SL) as an additive of alkaline pretreatment (AP), and evaluated its influence on the cellulosic digestibility of wheat straw (WS). The results displayed that the maximum of 72-h cellulosic digestibility could reach 83.5% as 15 g/L SL was introduced to the AP process (SAP), while the cellulosic digestibility of hydrothermal and alkaline pretreated WS was only 63.6% and 70.2%, respectively. These increments were subsequently attributed to the improvement of 6.5% xylan and 26.8% lignin accelerated by SAP, resulting in positive changes in structural characteristics such as accessibility, specific surface area, and cellulosic crystalline structure. The utilization of lignin-based surfactants in pretreatment has realized the economic feasibility of lignocellulosic biorefining and broadened the application prospect of surfactants.

An optimum biomass fractionation strategy into maximum carbohydrates conversion and lignin valorization from poplar

Appropriate fractionation of lignocellulosic biomass into useable forms is a key challenge to achieving an economic bioethanol production. In the present study, four different fractionation strategies of hydrothermal-, NaOH-, ethanol-, and NaOH catalyzed ethanol pretreatment were investigated to compare their abilities of cellulose conversion. Results showed that NaOH catalyzed ethanol pretreatment showed a rather high extent of delignification of 85.92%, which also enhanced the retention of cellulose (92.56%) and hemicellulose (76.57%); while other pretreatments tended to produce cellulose fraction which was insufficient to achieve the whole component utilization. After simultaneous saccharification and fermentation at high solids loading, synergistic maximization of xylose (42.47 g/L) and ethanol (85.74 g/L) output was achieved via alkaline ethanol pretreatment. Lignin characterization information showed that alkaline ethanol pretreatment facilitates the cleavage of β-O-4 linkage and further converts into arylglycerol. Moreover, less condensed substructure units with high processing activity were also generated in S- and G- lignin.

Cellulose/Grape-Seed-Extract Composite Films with High Transparency and Ultraviolet Shielding Performance Fabricated from Old Cotton Textiles

Plastics displaying many merits have been indispensable in daily life and they still maintain the strong momentum of development. Nevertheless, petroleum-based plastics possess a stable polymer structure and most of them are incinerated or accumulated in the environment, leading to devastating impacts on our ecology system. Thus, exploiting renewable and biodegradable materials to substitute or replace these traditional petroleum-derived plastics is an urgent and important task. In this work, renewable and biodegradable all-biomass cellulose/grape-seed-extract (GSEs) composite films with high transparency and anti-ultraviolet performance were fabricated successfully from pretreated old cotton textiles (P-OCTs) using a relatively simple, green, yet cost-effective, approach. It is proved that the obtained cellulose/GSEs composite films exhibit good ultraviolet shielding performance without sacrificing their transparency, and their UV-A and UV-B blocking values can reach as high as nearly 100%, indicating the good UV-blocking performance of GSEs. Meanwhile, the cellulose/GSEs film show higher thermal stability and water vapor transmission rate (WVTR) than most common plastics. Moreover, the mechanical property of the cellulose/GSEs film can be adjusted by the addition of a plasticizer. Briefly, the transparent all-biomass cellulose/grape-seed-extracts composite films with high anti-ultraviolet capacity were manufactured successfully and they can be used as potential materials in the packaging field.

Biomass Deacetylation at Moderate Solid Loading Improves Sugar Recovery and Succinic Acid Production

Biomass deacetylation with alkali prior to dilute acid pretreatment can be a promising approach to reduce the toxicity of the resulting hydrolysates and improve microbial fermentation. In this study, the effect of mild alkaline treatment of oil palm trunk (OPT) biomass on succinic acid production was evaluated. Deacetylation was carried out under different conditions: NaOH loadings (1–5%, w/v) and reaction times (15–90 min) at 100 °C. Deacetylation using 1% (w/v) NaOH within 15 min was sufficient to achieve a high acetic acid removal of 5.8 g/L with minimal sugar loss. Deacetylation under this condition resulted in a total sugar concentration of 55.8 g/L (18.0 g/L xylose and 37.8 g/L glucose), which was 37% higher than that of non-deacetylated OPT. Subsequently, succinic acid production using Actinobacillus succinogenes was also improved by 42% and 13% in terms of productivity and yield, respectively, at 10% (w/v) solid loading. This further demonstrated that mild alkaline treatment prior to dilute acid pretreatment is a promising strategy to improve succinic acid production. This study provides a facile approach for reducing the most influential inhibitory effect of acetic acid, and it can be applied to the exploitation of lignocellulosic biomass resources for succinic acid, biofuels, and/or other biochemical co-production in the future.

Lignocellulosic Biorefinery Technologies: A Perception into Recent Advances in Biomass Fractionation, Biorefineries, Economic Hurdles and Market Outlook

Lignocellulosic biomasses (LCB) are sustainable and abundantly available feedstocks for the production of biofuel and biochemicals via suitable bioconversion processing. The main aim of this review is to focus on strategies needed for the progression of viable lignocellulosic biomass-based biorefineries (integrated approaches) to generate biofuels and biochemicals. Processing biomass in a sustainable manner is a major challenge that demands the accomplishment of basic requirements relating to cost effectiveness and environmental sustainability. The challenges associated with biomass availability and the bioconversion process have been explained in detail in this review. Limitations associated with biomass structural composition can obstruct the feasibility of biofuel production, especially in mono-process approaches. In such cases, biorefinery approaches and integrated systems certainly lead to improved biofuel conversion. This review paper provides a summary of mono and integrated approaches, their limitations and advantages in LCB bioconversion to biofuel and biochemicals.

Electrodialysis Deacidification of Acid Hydrolysate in Hemicellulose Saccharification Process: Membrane Fouling Identification and Mechanisms

Acid saccharification of hemicelluloses offers promising pathways to sustainably diversify the revenue of the lignocellulose biorefinery industry. Electrodialysis to separate inorganic acids from acid hydrolysate in the hemicellulose saccharification process could realize the recovery of sulfuric acid, and significantly reduced the chemical consumption than the traditional ion exchange resins method. In this work, the deacidification of corncob acid hydrolysate was conducted by a homemade electrodialysis apparatus. The results showed that: (1) more than 99% of acid can be removed through the electrodialysis process; (2) A non-negligible membrane fouling occurred during the electrodialysis process, which aggravated with the repeated batch running The final global system resistance rose from 15.8 Ω (1st batch) to 43.9 Ω (10th batch), and the treatment ending time was delayed from 120 min (1st batch) to 162 min (10th batch); (4) About 90% of protein, 70% of ferulate acid, and 80% of p-coumarate acid precipitated from the corncob acid hydrolysate during the electrodialysis process. The zeta potential of corncob acid hydrolysate changed from a positive value to a negative value, and an isoelectric point around pH 2.3 was reached. HSQC, FTTR, and GPC, along with SEM and EDS analysis, revealed that the fouling layers mostly consisted of hydrolysates of protein and lignin. The result of HSQC indicated that the membrane foulant may exist in the form of lignin-carbohydrate complexes, as the lignin component of the membrane foulant is in the form of p-coumarate and ferulate. From the result of FTIR, a strong chemical bonding, such as a covalent linkage, existed between the lignin and protein in the membrane foulant. Throughout the electrodialysis process, the increased pH decreased the stability of colloidal particles, including lignin and proteins. Destabilized colloidal particles started to self-aggregate and form deposits on the anion exchange membrane's surface. Over time, these deposits covered the entire membrane surface and the spaces between the membranes. Eventually, they attached to the surface of the cation exchange membrane. In the end, a suggestion to control and minimize membrane fouling in this process was discussed: lower pH as a process endpoint and a post-treatment method.

Biosorbent Based on Poly(vinyl alcohol)-Tricarboxi-Cellulose Designed to Retain Organic Dyes from Aqueous Media

Methylene Blue, a cationic dye, was retained from aqueous solutions using a novel biosorbent made of poly(vinyl alcohol) reticulated with tricarboxi-cellulose produced via TEMPO oxidation (OxC25). The study of the Methylene Blue biosorption process was performed with an emphasis on operational parameters that may have an impact on it (such as biosorbent concentration, pH of the aqueous media, and temperature). The current study focused on three areas: (i) the physic-chemical characterization of the biosorbent (scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX)); (ii) biosorption data modeling to determine the quantitative characteristic parameters employing three equilibrium isotherms (Langmuir, Freundlich, and Dubinin-Radushkevich-DR); and (iii) the study of temperature influence. The results of the study showed that the Langmuir model provided a good fit for the experimental data of biosorption, realizing a maximum capacity of 806.45 mg/g at 20 °C. The free energy of biosorption (E) evaluated by the DR equation was in the range of 6.48-10.86 KJ/mol. The values of the thermodynamic parameters indicated an endothermic process because the free Gibbs energy ranged from -9.286 KJ/mol to -2.208 KJ/mol and the enthalpy was approximately -71.686 KJ/mol. The results obtained encourage and motivate the further study of this biosorption process by focusing on its kinetic aspects, establishing the biosorption's controlled steps, identifying the mechanism responsible for the retention of textile dyes presented in moderate concentration in aqueous media, and studying the biosorption process in a dynamic regime with a view to applying it to real systems.

Hydrolysis of lignocellulose to succinic acid: a review of treatment methods and succinic acid applications

Succinic acid (SA) is an intermediate product of the tricarboxylic acid cycle (TCA) and is one of the most significant platform chemicals for the production of various derivatives with high added value. Due to the depletion of fossil raw materials and the demand for eco-friendly energy sources, SA biosynthesis from renewable energy sources is gaining attention for its environmental friendliness. This review comprehensively analyzes strategies for the bioconversion of lignocellulose to SA based on the lignocellulose pretreatment processes and cellulose hydrolysis and fermentation principles and highlights the research progress on acid production and SA utilization under different microbial culture conditions. In addition, the fermentation efficiency of different microbial strains for the production of SA and the main challenges were analyzed. The future application directions of SA derivatives were pointed out. It is expected that this research will provide a reference for the optimization of SA production from lignocellulose.

Produce D-allulose from non-food biomass by integrating corn stalk hydrolysis with whole-cell catalysis

D-allulose is a high-value rare sugar with many health benefits. D-allulose market demand increased dramatically after approved as generally recognized as safe (GRAS). The current studies are predominantly focusing on producing D-allulose from either D-glucose or D-fructose, which may compete foods against human. The corn stalk (CS) is one of the main agricultural waste biomass in the worldwide. Bioconversion is one of the promising approach to CS valorization, which is of significance for both food safety and reducing carbon emission. In this study, we tried to explore a non-food based route by integrating CS hydrolysis with D-allulose production. Firstly we developed an efficient Escherichia coli whole-cell catalyst to produce D-allulose from D-glucose. Next we hydrolyzed CS and achieved D-allulose production from the CS hydrolysate. Finally we immobilized the whole-cell catalyst by designing a microfluidic device. Process optimization improved D-allulose titer by 8.61 times, reaching 8.78 g/L from CS hydrolysate. With this method, 1 kg CS was finally converted to 48.87 g D-allulose. This study validated the feasibility of valorizing corn stalk by converting it to D-allulose.

Efficient biosynthesis of pinosylvin from lignin-derived cinnamic acid by metabolic engineering of Escherichia coli

BACKGROUND

The conversion of lignin-derived aromatic monomers into valuable chemicals has promising potential to improve the economic competitiveness of biomass biorefineries. Pinosylvin is an attractive pharmaceutical with multiple promising biological activities.

RESULTS

Herein, Escherichia coli was engineered to convert the lignin-derived standard model monomer cinnamic acid into pinosylvin by introducing two novel enzymes from the wood plant: stilbene synthase from Pinus pinea (PpSTS) and 4-Coumarate-CoA ligase from Populus trichocarpa (Ptr4CL4). The expression of Ptr4CL4 drastically improved the production of pinosylvin (42.5 ± 1.1 mg/L), achieving values 15.7-fold higher than that of Ptr4CL5 (another 4-Coumarate-CoA ligase from Populus trichocarpa) in the absence of cerulenin. By adjusting the expression strategy, the optimized engineered strain produced pinosylvin at 153.7 ± 2.2 mg/L with an extremely high yield of 1.20 ± 0.02 mg/mg cinnamic acid in the presence of cerulenin, which is 83.9% ± 1.17 of the theoretical yield. This is the highest reported pinosylvin yield directly from cinnamic acid to date.

CONCLUSION

Our work highlights the feasibility of microbial production of pinosylvin from cinnamic acid and paves the way for converting lignin-related aromatics to valuable chemicals.

High-efficiency recovery and regeneration of choline-polyol deep eutectic solvent for biorefinery via bipolar membrane electrodialysis and ultrafiltration

Deep eutectic solvents (DES) have been widely studied for interesting solvent properties in resources utilization and green conversion of energy. Complex composition of DES and lack of recovery techniques restricts their further scale-up application. Exploring efficient recovery and regeneration methodology of DES in biorefinery could be beneficial for low-carbon circular bioeconomy. Recovery and regeneration of choline-polyol DES (choline chloride-ethylene glycol, ChCl-EG) after biomass pretreatment was studied using bipolar membrane electrodialysis (BMED) with ultrafiltration (UF). UF-BMED treatment worked based on the interception of macromolecular degradation products in pretreatment liquor and regional recovery of Ch⁺, Cl^- with EG. Influence of major parameters on DES recovery performance was studied with emphasis. Maximum recovery ratio of DES reached 97.4% and minimum specific energy consumption of DES recovery approached 6.0 kW·h/kg. Cognition gained from this research revealed an efficient technique for DES recycling after biorefinery.

Deciphering Cellodextrin and Glucose Uptake in Clostridium thermocellum

Sugar uptake is of great significance in industrially relevant microorganisms. Clostridium thermocellum has extensive potential in lignocellulose biorefineries as an environmentally prominent, thermophilic, cellulolytic bacterium. The bacterium employs five putative ATP-binding cassette transporters which purportedly take up cellulose hydrolysates. Here, we first applied combined genetic manipulations and biophysical titration experiments to decipher the key glucose and cellodextrin transporters. In vivo gene inactivation of each transporter and in vitro calorimetric and nuclear magnetic resonance (NMR) titration of each putative sugar-binding protein with various saccharides supported the conclusion that only transporters A and B play the roles of glucose and cellodextrin transport, respectively. To gain insight into the structural mechanism of the transporter specificities, 11 crystal structures, both alone and in complex with appropriate saccharides, were solved for all 5 putative sugar-binding proteins, thus providing detailed specific interactions between the proteins and the corresponding saccharides. Considering the importance of transporter B as the major cellodextrin transporter, we further identified its cryptic, hitherto unknown ATPase-encoding gene as clo1313_2554, which is located outside the transporter B gene cluster. The crystal structure of the ATPase was solved, showing that it represents a typical nucleotide-binding domain of the ATP-binding cassette (ABC) transporter. Moreover, we determined that the inducing effect of cellobiose (G2) and cellulose on cellulosome production could be eliminated by deletion of transporter B genes, suggesting the coupling of sugar transport and regulation of cellulosome components. This study provides key basic information on the sugar uptake mechanism of C. thermocellum and will promote rational engineering of the bacterium for industrial application.

Efficient removal of residual lignin from eucalyptus pulp via high-concentration chlorine dioxide treatment and its effect on the properties of residual solids

In fact, effectively removing lignin from pulp fibers facilitates the conversion and utilization of cellulose. In this study, the residual lignin in eucalyptus pulp was separated using a high concentration of chlorine dioxide. The effects of chlorine dioxide dosage, temperature, and time on lignin removal were investigated. The optimal conditions are chlorine dioxide dosage 5.0%, reaction temperature 40 °C, and reaction time 30 min. The lignin removal yield is 88.21%. The removal yields of cellulose and hemicellulose are 2.28 and 17.00%, respectively. The treated eucalyptus pulp has higher fiber crystallinity and thermal stability. The carbon content on the fiber surface is significantly reduced. The results show that lignin is removed by efficient oxidation, and the degradation of carbohydrates is inhibited using high concentrations of chlorine dioxide at low temperatures and short reaction times. This provides theoretical support for high value conversion of cellulose.

Coproduction of xylooligosaccharides and monosaccharides from hardwood by a combination of acetic acid pretreatment, mechanical refining and enzymatic hydrolysis

Sequential biorefinery treatments of acetic acid (HAC) pretreatment, Papir Forsknings Institutet (PFI) milling and enzymatic hydrolysis were demonstrated for coproduction of xylooligosaccharides (XOS) and fermentable monosaccharides. Results indicated that 36.2% XOS (50.8% X2-X3) and 17.0% low DP xylans were achieved using a HAC pretreatment with a combined severity factor of 0.78. The HAC pretreatment resulted in a XOS-rich prehydrolyzate with a low molecular weight of 1.28 kDa. The endo-xylanase hydrolysis was conducted on the pretreatment liquor to elevate XOS yield and the content of higher-value X2-X3. Moreover, fermentable glucose production from the pretreated residue increased by 2.3 folds when introducing an additional step of PFI refining prior to enzymatic digestion. Properties of substrate including cellulose accessibility, crystallite size, crystalline index and water retention value were in close relationships with enzymatic digestibility. The implementation of proposed biorefinery process will give more insights into the efficient construction of a wood-derived sugar platform.

Study on the Sugar-Producing Effect of High-Temperature Anaerobic Straw Biosaccharification Strain

The utilization of straw waste cellulose will be beneficial by economic, social, and environmental means. The present study sought to screen the high-efficiency cellulose sugar-producing strain from corn straw. The 16S high-throughput sequencing method and the combination of morphological, physiological, and biochemical characteristics of the strain confirmed the strain to be Clostridium thermocellum, which was named Clostridium thermocellum FC811. Moreover, the single factor experiment was conducted to investigate the effect of environmental factors on saccharification efficiency. The optimal saccharification conditions of cellulose saccharification of FC811 strain selected through response surface analysis were as follows: temperature of 58.9 °C, pH of 7.21, culture time of 6.60 d, substrate concentration of 5.01 g/L, and yeast powder concentration of 2.15 g/L. The soluble sugar yield was 3.11 g/L, and the conversion rate of reducing sugar was 62.2%. This study will provide a reference for resource and energy utilization of straw materials, simultaneous fermentation of sugar and hydrogen production, and their large-scale production and application.

A Value-Added Utilization Method of Sugar Production By-Products from Rice Straw: Extraction of Lignin and Evaluation of Its Antioxidant Activity

To value-added utilization of the rice straw, two types of lignin were extracted from the by-products of sugar production. The ether-extracted lignin with a purity of 98.7% was extracted from the pretreatment filtrate with two times the concentrated filtrate volume of ether, where the lignin yield was 6.62 mg/g of the rice straw. The ball-milled lignin with a purity of 99.6% was extracted from the milled enzymatic hydrolysis residue with a 1,4-dioxane solution, where the revolution speed and grinding time were 300 rpm and 12 h, respectively. The yield of ball-milled lignin was 34.52 mg/g of the rice straw, which was 421.5% higher than that extracted from extract-free rice straw. In the process of rice straw pretreatment and lignin extraction, 76.43% by mass of phosphotungstic acid catalyst and approximately 98% by volume of 1,4-dioxane solution could be recycled and reused. Compared with the soda lignin extracted from papermaking black liquor, the scavenging rates of DPPH radical and ABTS+ radical of ether-extracted lignin increased by 36.26% and 41.18%, respectively, while the above scavenging rates of ball-milled lignin increased by 30.22% and 37.75%, respectively. Moreover, the reducing power of the two extracted lignins was also stronger than that of soda lignin. The ether-extracted lignin and ball-milled lignin have the potential to be developed as natural macromolecular antioxidants.

Fermentative Lactic Acid Production From Lignocellulosic Feedstocks: From Source to Purified Product

The second (lignocellulosic biomass and industrial wastes) and third (algal biomass) generation feedstocks gained substantial interest as a source of various value-added chemicals, produced by fermentation. Lactic acid is a valuable platform chemical with both traditional and newer applications in many industries. The successful fractionation, separation, and hydrolysis of lignocellulosic biomass result in sugars' rich raw material for lactic acid fermentation. This review paper aims to summarize the investigations and progress in the last 5 years in lactic acid production from inexpensive and renewable resources. Different aspects are discussed-the type of raw materials, pretreatment and detoxification methods, lactic acid-producers (bacteria, fungi, and yeasts), use of genetically manipulated microorganisms, separation techniques, different approaches of process organization, as well as main challenges, and possible solutions for process optimization.

A recent advancement on preparation, characterization and application of nanolignin

Each year, 50 to 70 million tonnes of lignin are produced worldwide as by-products from pulp industries and biorefineries through numerous processes. Nevertheless, about 98% of lignin is directly burnt to produce steam to generate energy for the pulp mills and only a handful of isolated lignin is used as a raw material for the chemical conversion and for the preparation of various substances as well as modification of lignin into nanomaterials. Thus, thanks to its complex structure, the conversion of lignin to nanolignin, attracting growing attention and generating considerable interest in the scientific community. The objective of this review is to provide a complete understanding and knowledge of the synthesis methods and functionalization of various lignin nanoparticles (LNP). The characterization of LNP such as structural, thermal, molecular weight properties together with macromolecule and quantification assessments are also reviewed. In particular, emerging applications in different areas such as UV barriers, antimicrobials, drug administration, agriculture, anticorrosives, the environment, wood protection, enzymatic immobilization and others were highlighted. In addition, future perspectives and challenges related to the development of LNP are discussed.

Boosting levoglucosan and furfural production from corn stalks pyrolysis via electro-assisted seawater pretreatment

The seawater electrochemical pretreatment (ECP) was employed to upgrade the bio-oil of corn stalk in the paper. The seawater and its simulants were used as electrolytes without additional reagents. Moreover, the effect of seawater ECP under different conditions on the products distribution of pyrolysis bio-oil of pretreated corn stalks was investigated. The results showed that pretreatment effectively deconstructed the lignin and made cellulose exposed. Especially, under the optimum conditions (3.5 wt% NaCl, 15 V and 4 h), most of lignin was destroyed, and cellulose and hemicellulose were remained in residual solids. Furthermore, the levoglucosan and furfural were enriched in the pyrolysis bio-oil of corn stalk after seawater ECP, reaching 23.22 % and 14.14 %, respectively. Overall, this work presented a novel and green pretreatment process to optimize the components and structure of corn stalks as well as upgrade the bio-oil of corn stalk pyrolysis.

Construction of a fungal consortium for effective degradation of rice straw lignin and potential application in bio-pulping

To improve the lignin degradation efficiency, we established a co-culture consortium (LDFC) consisting of Trametes hirsuta BYL-3, Trametes versicolor BYL-7 and Trametes hirsuta BYL-8. The testing results showed that the constructed consortium showed improved the lignin degradation rate by fungi. The optimal cultivation conditions were mixture at 1:1:1 vol ratio of each fungus, 7% (w/v) of inoculum amount, culture temperature at 26 °C, pH was 6.9 and 10 days of culturing time. Under these conditions, the degradation rate of lignin was 39.7%, which was 9.3% higher than those before optimization (30.4%). Using rice straw for treatment by LDFC to papermaking, the paper tensile strength was 8 N, and the ring pressure index was 2.46 N·m/g, which meets the standards for the production of corrugated paper for packaging. These results indicate that LDFC has potential application value to convert rice straw resources for bio-pulping to make papers.

Steam Explosion Pretreatment of Lignocellulosic Biomass: A Mini-Review of Theorical and Experimental Approaches

Steam Explosion (SE) is one of the most efficient and environmentally friendly processes for the pretreatment of lignocellulosic biomass. It is an important tool for the development of the biorefinery concept to mitigate the recalcitrance of biomass. However, the two distinct steps of SE, steam cracking and explosive decompression, leading to the breakdown of the lignocellulosic matrix have generally been studied in empiric ways and clarification are needed. This mini-review provides new insights and recommendations regarding the properties of subcritical water, process modeling and the importance of the depressurization rate.

High-Strength Regenerated Cellulose Fiber Reinforced with Cellulose Nanofibril and Nanosilica

In this study, a novel type of high-strength regenerated cellulose composite fiber reinforced with cellulose nanofibrils (CNFs) and nanosilica (nano-SiO2) was prepared. Adding 1% CNF and 1% nano-SiO2 to pulp/AMIMCl improved the tensile strength of the composite cellulose by 47.46%. The surface of the regenerated fiber exhibited a scaly structure with pores, which could be reduced by adding CNF and nano-SiO2, resulting in the enhancement of physical strength of regenerated fibers. The cellulose/AMIMCl mixture with or without the addition of nanomaterials performed as shear thinning fluids, also known as "pseudoplastic" fluids. Increasing the temperature lowered the viscosity. The yield stress and viscosity sequences were as follows: RCF-CNF2 > RCF-CNF2-SiO22 > RCF-SiO22 > RCF > RCF-CNF1-SiO21. Under the same oscillation frequency, G' and G" decreased with the increase of temperature, which indicated a reduction in viscoelasticity. A preferred cellulose/AMIMCl mixture was obtained with the addition of 1% CNF and 1% nano-SiO2, by which the viscosity and shear stress of the adhesive were significantly reduced at 80 °C.

Challenges and Future Perspectives of Promising Biotechnologies for Lignocellulosic Biorefinery

Lignocellulose is a kind of renewable bioresource containing abundant polysaccharides, which can be used for biochemicals and biofuels production. However, the complex structure hinders the final efficiency of lignocellulosic biorefinery. This review comprehensively summarizes the hydrolases and typical microorganisms for lignocellulosic degradation. Moreover, the commonly used bioprocesses for lignocellulosic biorefinery are also discussed, including separated hydrolysis and fermentation, simultaneous saccharification and fermentation and consolidated bioprocessing. Among these methods, construction of microbial co-culturing systems via consolidated bioprocessing is regarded as a potential strategy to efficiently produce biochemicals and biofuels, providing theoretical direction for constructing efficient and stable biorefinery process system in the future.