Multifunctional manganese-based carboxymethyl chitosan hydrogels for pH-triggered pesticide release and enhanced fungicidal activity

Hydrogel loaded with thiolated chitosan modified taxifolin liposome promotes osteoblast proliferation and regulates Wnt signaling pathway to repair rat skull defects

To alleviate skull defects and enhance the biological activity of taxifolin, this study utilized the thin-film dispersion method to prepare paclitaxel liposomes (TL). Thiolated chitosan (CSSH)-modified TL (CTL) was synthesized through charge interactions. Injectable hydrogels (BLG) were then prepared as hydrogel scaffolds loaded with TAX (TG), TL (TLG), and CTL (CTLG) using a Schiff base reaction involving oxidized dextran and carboxymethyl chitosan. The study investigated the bone reparative properties of CTLG through molecular docking, western blot techniques, and transcriptome analysis. The particle sizes of CTL were measured at 248.90 ± 14.03 nm, respectively, with zeta potentials of +36.68 ± 5.43 mV, respectively. CTLG showed excellent antioxidant capacity in vitro. It also has a good inhibitory effect on Escherichia coli and Staphylococcus aureus, with inhibition rates of 93.88 ± 1.59 % and 88.56 ± 2.83 % respectively. The results of 5-ethynyl-2 '-deoxyuridine staining, alkaline phosphatase staining and alizarin red staining showed that CTLG also had the potential to promote the proliferation and differentiation of mouse embryonic osteoblasts (MC3T3-E1). The study revealed that CTLG enhances the expression of osteogenic proteins by regulating the Wnt signaling pathway, shedding light on the potential application of TAX and bone regeneration mechanisms.

N-succinyl-chitosan as ecofriendly pesticide carriers: Nano encapsulation and synergistic antifungal effect on 4-hydroxyphenyl-2-propenyl-1-one derivatives based on chalcone structure

INTRODUCTION

Traditional pesticides have poor-water solubility, high toxicity and low bioavailability. Therefore, it is of great significance for the sustainable and healthy development of the pesticide industry to develop efficient and ecofriendly new chemical pesticide products and formulations.

OBJECTIVES

This study aims to synthesize a series of derivatives based on chalcone structure (HPPO), and then use the amphiphilic and self-assembly characteristics of N-succinyl-chitosan (NSCS) to prepare HPPO@NSCS nanoparticles (HPPO@NSCS NPs) in order to realize the green application of HPPO, and investigate the antifungal activity and mechanisms of HPPO@NSCS NPs.

METHODS

NSCS was synthesized by structural modification using chitosan as the carrier. Based on its amphiphilic and self-assembly characteristics, HPPO-16@NSCS NPs were reasonably prepared by combining with active small molecule HPPO-16. Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), dynamic light scattering (DLS), fluorescence spectroscopy (FS) and high-performance liquid chromatography (HPLC) were used to characterize the physicochemical properties of NSCS and HPPO-16@NSCS NPs. The inhibitory activity of nanopesticides against Rhizoctonia solani (R. solani) was tested in vivo and in vitro. The mechanism of antifungal action was discussed from the observation of pathogen morphology, fluorescence staining and enzyme activity determination.

RESULTS

28 small molecules based on chalcone structure (HPPO-1-28), NSCS and HPPO-16@NSCS were successfully synthesized. The application of HPPO-16@NSCS could impair the development, cell structure, cellular energy utilization, and metabolism pathways of the fungi. The protective effects of HPPO-16@NSCS NPs on rice leaves and leaf sheaths were 80.9 and 76.1 %, respectively, which were better than those of azoxystrobin.

CONCLUSION

This study reveals that these simple chalcone derivatives can be further explored as viable antibacterial alternatives and NSCS as a novel pesticide matrix can be used for the delivery of more insoluble pesticides.

A comprehensive review on the inherent and enhanced antifouling mechanisms of hydrogels and their applications

Biofouling remains a persistent challenge within the domains of biomedicine, tissue engineering, marine industry, and membrane separation processes. Multifunctional hydrogels have garnered substantial attention due to their complex three-dimensional architecture, hydrophilicity, biocompatibility, and flexibility. These hydrogels have shown notable advances across various engineering disciplines. The antifouling efficacy of hydrogels typically covers a range of strategies to mitigate or inhibit the adhesion of particulate matter, biological entities, or extraneous pollutants onto their external or internal surfaces. This review provides a comprehensive review of the antifouling properties and applications of hydrogels. We first focus on elucidating the fundamental principles for the inherent resistance of hydrogels to fouling. This is followed by a comprehensive investigation of the methods employed to enhance the antifouling properties enabled by the hydrogels' composition, network structure, conductivity, photothermal properties, release of reactive oxygen species (ROS), and incorporation of silicon and fluorine compounds. Additionally, we explore the emerging prospects of antifouling hydrogels to alleviate the severe challenges posed by surface contamination, membrane separation and wound dressings. The inclusion of detailed mechanistic insights and the judicious selection of antifouling hydrogels are geared toward identifying extant gaps that must be bridged to meet practical requisites while concurrently addressing long-term antifouling applications.

Superabsorbent hydrogels based on natural polysaccharides: Classification, synthesis, physicochemical properties, and agronomic efficacy under abiotic stress conditions: A review

Superabsorbent polymers (SAPs) are a class of polymers that have attracted tremendous interest due to their multifunctional properties and wide range of applications. The importance of this class of polymers is highlighted by the large number of publications, including articles and patents, dealing with the use of SAPs for various applications. Within this framework, this review provides an overview of SAPs and highlights various key aspects, such as their history, classification, and preparation methods, including those related to chemically or physically cross-linked networks, as well as key factors affecting their performance in terms of water absorption and storage. This review also examines the potential use of polysaccharides-based SAPs in agriculture as soil conditioners or slow-release fertilizers. The basic aspects of SAPs, and methods of chemical modification of polysaccharides are presented and guidelines for the preparation of hydrogels are given. The water retention and swelling mechanisms are discussed in light of some mathematical empirical models. The nutrient slow-release kinetics of nutrient-rich SAPs are also examined on the basic of commonly used mathematical models. Some examples illustrating the advantages of using SAPs in agriculture as soil conditioners and agrochemical carriers to improve crop growth and productivity are presented and discussed. This review also attempts to provide an overview of the role of SAPs in mitigating the adverse effects of various abiotic stresses, such as heavy metals, salinity, and drought, and outlines future trends and prospects.

Exploitation of microbial activities at low pH to enhance planetary health

Awareness is growing that human health cannot be considered in isolation but is inextricably woven with the health of the environment in which we live. It is, however, under-recognized that the sustainability of human activities strongly relies on preserving the equilibrium of the microbial communities living in/on/around us. Microbial metabolic activities are instrumental for production, functionalization, processing, and preservation of food. For circular economy, microbial metabolism would be exploited to produce building blocks for the chemical industry, to achieve effective crop protection, agri-food waste revalorization, or biofuel production, as well as in bioremediation and bioaugmentation of contaminated areas. Low pH is undoubtedly a key physical-chemical parameter that needs to be considered for exploiting the powerful microbial metabolic arsenal. Deviation from optimal pH conditions has profound effects on shaping the microbial communities responsible for carrying out essential processes. Furthermore, novel strategies to combat contaminations and infections by pathogens rely on microbial-derived acidic molecules that suppress/inhibit their growth. Herein, we present the state-of-the-art of the knowledge on the impact of acidic pH in many applied areas and how this knowledge can guide us to use the immense arsenal of microbial metabolic activities for their more impactful exploitation in a Planetary Health perspective.

Controlled release of herbicides through glyphosate intercalated layered double hydroxides and enhancement of anti-scouring ability via poly-l-aspartic acid and chitosan modification

Nanocarrier preparations could effectively improve the utilization rate of pesticides, and reduce pesticide loss. In this study, glyphosate (GLY)-loaded MgAl layered double hydroxide (GLY@LDH) was synthesized via an in-situ method. Subsequently, GLY@LDH composite samples were prepared using a layer-by-layer self-assembly approach and modified with poly-L-aspartic acid (PASP) and chitosan (CS). XRD, FT-IR, SEM, and Zeta potential characterization confirmed that GLY was successfully loaded in the interlayer of LDHs and PASP/CS were successfully encapsulated on the surface of the composite sample. The release effect in different ionic solutions and soils was studied and analyzed. The release behavior conforms to the Ritger-Peppas kinetic model, and the release mechanism was ion exchange, which was further explored by means of XRD, SEM, and molecular simulation. The results of the anti-scouring experiment and contact angle measurement indicated that the layered self-assembly material enhanced the washing resistance of the material. The practical application effect of the sample was verified through a pot experiment. This study provides new insights into the simple preparation of pesticide-controlled release formulations that reduce leaching losses.

Sodium alginate-carboxymethyl chitosan hydrogels loaded with difenoconazole for pH-responsive release to control wheat crown rot

Increasing concern about environmental pollution has driven the development of controlled release formulations for agrochemicals. Due to the advantages of degradability and responsiveness to environmental stimuli, polysaccharide-based hydrogel is an ideal carrier for agrochemicals controlled release. In this study, a method-easy polysaccharide hydrogel for controlled release of difenoconazole (DZ) was prepared with sodium alginate (SA) and carboxymethyl chitosan (CMCS). Due to its three-dimensional crosslinked mesh structure, the prepared hydrogels (CSDZ) showed an agrochemical load capacity of 9.03 % and an encapsulation efficiency of 68.64 %. The release rate is faster in alkaline solution, followed by neutral solution, and slowest in an acid environment, which is consistent with the swelling behavior. Furthermore, leaching studies showed that CSDZ hydrogels have excellent protective properties for encapsulated agrochemicals. Compared with technical DZ, the results of in vitro and pot antifungal testing showed that CSDZ had a better control effect against wheat crown rot (Fusarium pseudograminearum). Safety assessment studies indicated that CSDZ hydrogels exhibit good biocompatibility on nontargeted organisms (Daphnia magna, zebrafish and Eisenia fetida) and wheat. This study aims to provide a potentially promising approach for the preparation and application of biocompatible polysaccharide-based hydrogels for agrochemical-controlled release in sustainable disease management.

Multifunctional Borax Cross-Linked Hydroxypropyl Guar Gum Hydrogels with Crop Nutritional Function as Carriers for Dual-Responsive Acaricide Release

Hydrogels with porous networks have received considerable attention in smart pesticide delivery due to their inherent versatility. In this study, acaricide cyetpyrafen (CPF)-loaded borax (BO) cross-linked hydroxypropyl guar gum (HPG) (CPF@BO-co-HPG, CBG) hydrogels were prepared by cross-linking and pesticide loading simultaneously. The flowable CBG hydrogels with 3D porous network structures had better wetting and spreading ability on Citrus reticulata Blanco leaves and a hydrophobic interface. The nonflowable CBG hydrogels had pH- and temperature-responsive release properties. Meanwhile, the acaricidal efficacy of CBG against Panonychus citri (McGregor) at both 24 and 48 h was significantly higher than those of CPF-loaded BO-free HPG hydrogels. Furthermore, CBG had a nutritional function for cotton growth and environmental safety for zebrafish. This research developed a BO cross-linked HPG hydrogel as a smart pesticide delivery vehicle and crop nutrient replenishment, which can be widely applied in sustainable agriculture.

Coprecipitation-based synchronous chlorantraniliprole encapsulation with chitosan: carrier-pesticide interactions and release behavior

BACKGROUND

Controlled-release pesticide formulations have emerged as a promising approach towards sustainable pest control. Herein, an environment-friendly formulation of insecticide chlorantraniliprole (CAP) was fabricated through a simple approach of coprecipitation-based synchronous encapsulation by chitosan (CTS), with carrier-pesticide interaction mechanism and release behavior investigated.

RESULTS

The resulting CAP/CTS controlled-release formulation (CCF) showed a good loading content of 28.1% and a high encapsulation efficiency of 75.6%. Instrument determination in combination with molecular dynamics (MD) simulations displayed that the primary interactions between CAP and CTS were physical adsorption and complicated hydrogen (H)-bonds, which formed dominantly between NH in amides [or nitrogen (N) in ring structures] of CAP and hydroxyl (or amino) groups of CTS, as well as oxygen (O) in CAP with hydrogen in CTS or H2 O molecules. The in vitro release tests exhibited obvious pH/temperature sensitivity, with release dynamics following the first-order or Ritger-Peppas model. As the temperature increased, the CAP release process of the Ritger-Peppas model changed from Case-II to anomalous transport, and ultimately to a Fickian diffusion mechanism. The control effect against Plutella xylostella larvae also was evaluated by toxicity tests, where comparable efficacy of CCF to the commercial suspension concentrate was obtained.

CONCLUSION

The innovative, easy-to-prepare CCF can be used as a formulation with obvious pH/temperature sensitivity and good efficacy on target pests. This work contributes to the development of efficient and safe pesticide delivery systems, especially using the natural polymer materials as carriers. © 2023 Society of Chemical Industry.

Advances in the Research and Application of Smart-Responsive Hydrogels in Disease Treatment

Smart-responsive hydrogels have been widely used in various fields, particularly in the biomedical field. Compared with traditional hydrogels, smart-responsive hydrogels not only facilitate the encapsulation and controlled release of drugs, active substances, and even cells but, more importantly, they enable the on-demand and controllable release of drugs and active substances at the disease site, significantly enhancing the efficacy of disease treatment. With the rapid advancement of biomaterials, smart-responsive hydrogels have received widespread attention, and a wide variety of smart-responsive hydrogels have been developed for the treatment of different diseases, thus presenting tremendous research prospects. This review summarizes the latest advancements in various smart-responsive hydrogels used for disease treatment. Additionally, some of the current shortcomings of smart-responsive hydrogels and the strategies to address them are discussed, as well as the future development directions and prospects of smart-responsive hydrogels.

Diffusion-Limited Processes in Hydrogels with Chosen Applications from Drug Delivery to Electronic Components

Diffusion is one of the key nature processes which plays an important role in respiration, digestion, and nutrient transport in cells. In this regard, the present article aims to review various diffusion approaches used to fabricate different functional materials based on hydrogels, unique examples of materials that control diffusion. They have found applications in fields such as drug encapsulation and delivery, nutrient delivery in agriculture, developing materials for regenerative medicine, and creating stimuli-responsive materials in soft robotics and microrobotics. In addition, mechanisms of release and drug diffusion kinetics as key tools for material design are discussed.

Silica modified copper-based alginate/chitosan hybrid hydrogel to control soil fumigant release, reduce emission and enhance bioactivity

Soil fumigant has been extensively used for excellent efficacy on soil-borne diseases. However, rapid emission and insufficient effective duration typically limit its application. In this study, hybrid silica/polysaccharide hydrogel was proposed (SIL/Cu/DMDS) by emulsion-gelation method to encapsulate dimethyl disulfide (DMDS). The orthogonal study was used to optimize the preparation parameters for LC and EE of SIL/Cu/DMDS, which was 10.39 % and 71.05 %, respectively. Compared with silica, the time for 90 % of the total emissions was extended by 4.36 times. The hydrogel possessed a longer persistent duration and the degradation half-life of DMDS was 3.47 times greater than that of silica alone. Moreover, the electrostatic interaction between abundant groups of polysaccharide hydrogel bestowed DMDS with pH-triggered release behavior. Additionally, SIL/Cu/DMDS had excellent water holding and water retention capacity. The bioactivity of the hydrogel was 58.1 % higher than that of DMDS TC due to the strong synergistic effect between DMDS and the carriers (chitosan and Cu²⁺), and showed obvious biosafety to cucumber seeds. This study seeks to provide a potential approach to develop hybrid polysaccharide hydrogel to control soil fumigants release, reduce emission and enhance bioactivity in plant protection.

Molecular mechanism of plant elicitor daphnetin-carboxymethyl chitosan nanoparticles against Ralstonia solanacearum by activating plant system resistance

The exploration of biopolymer-based materials to avoid hazardous chemicals in agriculture has gained enormous importance for sustainable crop protection. Due to its good biocompatibility and water solubility, carboxymethyl chitosan (CMCS) has been widely applied as a pesticide carrier biomaterial. However, the mechanism by which carboxymethyl chitosan-grafted natural product nanoparticles induce tobacco systemic resistance against bacterial wilt remains largely unknown. In this study, water-soluble CMCS-grafted daphnetin (DA) nanoparticles (DA@CMCS-NPs) were successfully synthesized, characterized, and assessed for the first time. The grafting rate of DA in CMCS was 10.05 %, and the water solubility was increased. In addition, DA@CMCS-NPs significantly increased the activities of CAT, PPO and SOD defense enzymes, activated the expression of PR1 and NPR1, and suppressed the expression of JAZ3. DA@CMCS-NPs could induce immune responses against R. solanacearum in tobacco, including increases in defense enzymes and overexpression of pathogenesis-related (PR) proteins. The application of DA@CMCS-NPs effectively suppressed the development of tobacco bacterial wilt in pot experiments, and the control efficiency was as high as 74.23 %, 67.80 %, 61.67 % at 8, 10, and 12 days after inoculation. Additionally, DA@CMCS-NPs has excellent biosafety. Therefore, this study highlighted the application of DA@CMCS-NPs in manipulating tobacco to generate defense responses against R. solanacearum, which can be attributed to systemic resistance.

Stimuli-Responsive and Antibacterial Cellulose-Chitosan Hydrogels Containing Polydiacetylene Nanosheets

Herein, we report a stimuli-responsive hydrogel with inhibitory activity against Escherichia coli prepared by chemical crosslinking of carboxymethyl chitosan (CMCs) and hydroxyethyl cellulose (HEC). The hydrogels were prepared by esterification of chitosan (Cs) with monochloroacetic acid to produce CMCs which were then chemically crosslinked to HEC using citric acid as the crosslinking agent. To impart a stimuli responsiveness property to the hydrogels, polydiacetylene-zinc oxide (PDA-ZnO) nanosheets were synthesized in situ during the crosslinking reaction followed by photopolymerization of the resultant composite. To achieve this, ZnO was anchored on carboxylic groups in 10,12-pentacosadiynoic acid (PCDA) layers to restrict the movement of the alkyl portion of PCDA during crosslinking CMCs and HEC hydrogels. This was followed by irradiating the composite with UV radiation to photopolymerize the PCDA to PDA within the hydrogel matrix so as to impart thermal and pH responsiveness to the hydrogel. From the results obtained, the prepared hydrogel had a pH-dependent swelling capacity as it absorbed more water in acidic media as compared to basic media. The incorporation of PDA-ZnO resulted in a thermochromic composite responsive to pH evidenced by a visible colour transition from pale purple to pale pink. Upon swelling, PDA-ZnO-CMCs-HEC hydrogels had significant inhibitory activity against E. coli attributed to the slow release of the ZnO nanoparticles as compared to CMCs-HEC hydrogels. In conclusion, the developed hydrogel was found to have stimuli-responsive properties and inhibitory activity against E. coli attributed to zinc nanoparticles.

Dual-functional lignin-based hydrogels for sustained release of agrochemicals and heavy metal ion complexation

An effective way of improving the efficiency of agrochemicals and improving crop yield and quality is by slow or sustained release, which is conducive to environmental protection. Meanwhile, the excessive amount of heavy metal ions in soil can create toxicity in plants. Here, we prepared lignin-based dual-functional hydrogels containing conjugated agrochemical and heavy metal ligands through free-radical copolymerization. The content of the agrochemicals (including plant growth regulator 3-indoleacetic acid (IAC) and herbicide 2,4-dichlorophenoxyacetic acid (DCP)) in the hydrogels were tuned by changing the hydrogel composition. The conjugated agrochemicals could slowly release through the gradual cleavage of the ester bond. As a result of the release of the DCP herbicide, the growth of lettuce was effectively regulated, thus confirming the feasibility and effectiveness of this system in application. At the same time, due to the presence of metal chelating groups (such as COOH, phenolic OH, and tertiary amine) the hydrogels could act as adsorbents or stabilizers towards heavy metal ions for improving the soil remediation and preventing the adsorption of these toxic metals by plant roots. Specifically, Cu(II) and Pb(II) could be adsorbed >380 and 60 mg/g, respectively.

Distribution of Emamectin Benzoate Granules in Maize Plants by Broadcasting into Maize Leaf Whorls

Good control effects on fall armyworm (FAW) can be obtained by broadcasting emamectin benzoate (EB) granules into maize leaf whorls. However, the distribution of EB in maize plants is not clear. In this study, EB granules were prepared by the rotating granulation method, and the granules were characterized using a Fourier transform infrared spectrometer. The behavior of EB granules in water was observed using a microscope, and in vitro release of EB from granules was also studied. A method for the determination of EB in maize plants, old leaves, grains, and cobs was established by using ultra-performance liquid chromatography-tandem mass spectrometry. The results showed that EB was loaded in granules successfully, and the granules disintegrated slowly in water, so the release of granules could be regulated using various water contents. The prepared EB granules were qualified and stable. The field experiment showed that the concentration of EB in maize leaf whorls could be maintained above 0.23 mg·kg^-1 within 3 days after broadcasting EB granules. This ensured that FAW could be killed in a short time. Then, EB gradually transferred to the old leaves. After 21 days of application, the content of EB in the old leaves was 0.07 mg·kg^-1, which has long-time control effects on FAW. The control effects of the three doses of granules against Spodoptera frugiperda were higher than 78% after 14 days of application. At the tested dosage, no phytotoxicity to crops was observed. At harvest, neither the maize grain nor the cobs had EB content. New controlled formulations to S. frugiperda were developed and will be suitable for application in mountainous areas where the lack of water resources is a factor.

Controlled-release alginate-bentonite polymer gel granules of emamectin benzoate and control efficacy against Spodoptera frugiperda

BACKGROUND

The fall armyworm (FAW), Spodoptera frugiperda (J. E. Smith), is known to cause large agricultural production losses. Emamectin benzoate is one of the most effective insecticides to control this pest; however, its effective time is not sufficiently long to control FAW. Therefore, it is important that new controlled insecticide formulations with new application methods are developed.

RESULTS

A series of emamectin benzoate polymer gel granules were prepared with sizes ranging from 0.95 to 1.5 mm. As the bentonite content increased, the release rate decreased. The cumulative release process of emamectin benzoate mainly depends on the cracks in the surface of the granules, and the release rate can be described by non-Fickian and Fickian diffusion, which are closely related to the water content. By spreading the developed polymer gel granules into maize leaf whorls, the control effect reached 83% after 21 days in field trials.

CONCLUSION

A novel polymer gel granule was developed that can effectively regulate emamectin benzoate release. By broadcasting polymer gel granules into maize leaf whorls, significant control efficacy against FAW can be obtained, and this could potentially be used for the effective control of FAW. © 2022 Society of Chemical Industry.

Zeolitic Imidazole Framework-90-Based Pesticide Smart-Delivery System with Enhanced Antimicrobial Performance

Multimodal antimicrobial technology is regarded as a promising strategy for controlling plant diseases because it enhances antimicrobial efficacy by blocking multiple pesticide-resistance pathways. In this work, a pH-responsive multimodal antimicrobial system was constructed based on ZIF-90 for the controlled release of kasugamycin (KSM). A series of physicochemical characterizations confirmed the successful fabrication of ZIF-90-KSM. The results indicated that the loading capacity of ZIF-90-KSM for KSM was approximately 6.7% and that the ZIF-90 nanocarriers could protect KSM against photodegradation effectively. The acid pH at the site of disease not only decompose the Schiff base bonds between KSM and ZIF-90, but also completely dissolved the nanocarriers. The simultaneous release of KSM and Zn²⁺ ions was able to achieve multimodal antimicrobial functions during disease occurs. A bioactivity survey indicated that ZIF-90-KSM had superior fungicidal activity and longer duration against Magnaporthe oryzae than KSM aqueous solution. In addition, the phytotoxicity assessment of ZIF-90-KSM on rice plants did not reveal any adverse effects. Therefore, ZIF-90-KSM prepared by Schiff base reaction has great potential for achieving synergistic antifungal functions and provides an eco-friendly approach to manage rice diseases.

Gel Carriers for Plant Extracts and Synthetic Pesticides in Rodent and Arthropod Pest Control: An Overview

Insecticides and rodenticides form the basis of integrated pest management systems worldwide. As pest resistance continues to increase and entire groups of chemical active ingredients are restricted or banned, manufacturers are looking for new options for more effective formulations and safer application methods for the remaining pesticide ingredients. In addition to new technological adaptations of mainstream formulations in the form of sprays, fumigants, and dusts, the use of gel formulations is becoming increasingly explored and employed. This article summarizes information on the current and potential use of gel (including hydrogel) and paste formulations against harmful arthropods or rodents in specific branches of pest management in the agricultural, food, stored product, structural wood, urban, medical, and public health areas. Due to the worldwide high interest in natural substances, part of the review was devoted to the use of gels for the formulation of pesticide substances of botanical origin, such as essential or edible oils. Gels as emerging formulation of so called “smart insecticides” based on molecular iRNA disruptors are discussed.

Multitasking smart hydrogels based on the combination of alginate and poly(3,4-ethylenedioxythiophene) properties: A review

Poly(3,4-ethylenedioxythiophene) (PEDOT), a very stable and biocompatible conducting polymer, and alginate (Alg), a natural water-soluble polysaccharide mainly found in the cell wall of various species of brown algae, exhibit very different but at the same complementary properties. In the last few years, the remarkable capacity of Alg to form hydrogels and the electro-responsive properties of PEDOT have been combined to form not only layered composites (PEDOT-Alg) but also interpenetrated multi-responsive PEDOT/Alg hydrogels. These materials have been found to display outstanding properties, such as electrical conductivity, piezoelectricity, biocompatibility, self-healing and re-usability properties, pH and thermoelectric responsiveness, among others. Consequently, a wide number of applications are being proposed for PEDOT-Alg composites and, especially, PEDOT/Alg hydrogels, which should be considered as a new kind of hybrid material because of the very different chemical nature of the two polymeric components. This review summarizes the applications of PEDOT-Alg and PEDOT/Alg in tissue interfaces and regeneration, drug delivery, sensors, microfluidics, energy storage and evaporators for desalination. Special attention has been given to the discussion of multi-tasking applications, while the new challenges to be tackled based on aspects not yet considered in either of the two polymers have also been highlighted.

Chitosan-based organic/inorganic composite engineered for UV light-controlled smart pH-responsive pesticide through in situ photo-induced generation of acid

BACKGROUND

Confined by the volatile property, pesticides are overused and lost significantly during and after spraying, weakening the ecological microbalance among different species of lives. Acid-responsive pesticide is a type of smartly engineered pesticides that contribute to the improvement of utilization efficiency of pesticidal active ingredients in acid-controlled manner, whilst the implementation of acidic solutions may disturb the balance of microenvironment surrounding targeted plants or cause secondary pollution, underscoring the input of acid in a more precise strategy.

RESULTS

Chitosan was chemically modified with a photoacid generator (2-nitrobenzaldehyde) serving as a light-maneuvered acid self-supplier, based on which a smart pesticide was formulated by the integration of attapulgite and organophosphate insecticide chlorpyrifos. Under the irradiation of UV light (365 nm), the modified chitosan would undergo a photolytic reaction to generate an acid and pristine chitosan, which seized the labile protons and facilitated the release of chlorpyrifos based on its inherent pH-responsive flexibility. According to the pesticide release performance, the release rate of chlorpyrifos under UV light (27.2 mW/cm² ) reached 78%, significantly higher than those under sunlight (22%, 4.2 mW/cm² ) and in the dark (20%) within the same time, consistent with the pH reduction to 5.3 under UV light and no obvious pH change for the two other situations, exhibiting an attractive UV light-controlled, acid-propelled release behavior.

CONCLUSION

Compared to direct acid spray approach, the proposed in situ photo-induced generation of acid locally on the spots of applied pesticide circumvents the problem of acid contamination to nontargets, demonstrating higher efficiency and biocompatibility for the controlled delivery of acid-responsive pesticides and pest management. © 2022 Society of Chemical Industry.

Nanopesticide Formulation from Pyraclostrobin and Graphene Oxide as a Nanocarrier and Application in Controlling Plant Fungal Pathogens

Efficient and environment-friendly nanopesticide delivery systems are critical for the sustainable development of agriculture. In this study, a graphene oxide nanocomposite was developed for pesticide delivery and plant protection with pyraclostrobin as the model pesticide. First, graphene oxide-pyraclostrobin nanocomposite was prepared through fast adsorption of pyraclostrobin onto graphene oxide with a maximum loading of 87.04%. The as-prepared graphene oxide-pyraclostrobin nanocomposite exhibited high stability during two years of storage, suggesting its high potential in practical application. The graphene oxide-pyraclostrobin nanocomposite could achieve temperature (25 °C, 30 °C and 35 °C) and pH (5, 7 and 9) slow-release behavior, which overcomes the burst release of conventional pyraclostrobin formulation. Furthermore, graphene oxide-pyraclostrobin nanocomposite exhibited considerable antifungal activities against Fusarium graminearum and Sclerotinia sclerotiorum both in vitro and in vivo. The cotoxicity factor assay revealed that there was a synergistic interaction when graphene oxide and pyraclostrobin were combined at the ratio of 1:1 against the mycelial growth of Fusarium graminearum and Sclerotinia sclerotiorum with co-toxicity coefficient values exceeding 100 in vitro. The control efficacy of graphene oxide-pyraclostrobin nanocomposite was 71.35% and 62.32% against Fusarium graminearum and Sclerotinia sclerotiorum in greenhouse, respectively, which was higher than that of single graphene oxide and pyraclostrobin. In general, the present study provides a candidate nanoformulation for pathogenic fungal control in plants, and may also expand the application of graphene oxide materials in controlling plant fungal pathogens and sustainable agriculture.

A pH Dual-Responsive Multifunctional Nanoparticle Based on Mesoporous Silica with Metal-Polymethacrylic Acid Gatekeeper for Improving Plant Protection and Nutrition

Integrating pesticides and mineral elements into a multi-functional stimuli-responsive nanocarrier can have a synergistic effect on protecting plants from pesticides and the supply of nutrients. Herein, a pH dual-responsive multifunctional nanosystem regulated by coordination bonding using bimodal mesoporous silica (BMMs) as a carrier and coordination complexes of ferric ion and polymethacrylic acid (PMAA/Fe³⁺) as the gatekeeper was constructed to deliver prochloraz (Pro) for the smart treatment of wilt disease (Pro@BMMs−PMAA/Fe³⁺). The loading capacity of Pro@BMMs−PMAA/Fe³⁺ nanoparticles (Nps) was 24.0% and the “PMMA/Fe³⁺” complexes deposited on the BMMs surface could effectively protect Pro against photodegradation. The nanoparticles possessed an excellent pH dual-responsive release behavior and better inhibition efficacy against Rhizoctonia solani. Fluorescence tracking experiments showed that Nps could be taken up and transported in fungi and plants, implying that non-systemic pesticides could be successfully delivered into target organisms. Furthermore, BMMS−PMAA/Fe³⁺ nanocarriers could effectively promote the growth of crop seedlings and had no obvious toxicological influence on the cell viability and the growth of bacteria. This study provides a novel strategy for enhancing plant protection against diseases and reducing the risk to the environment.

Controlled release of dinotefuran with temperature/pH-responsive chitosan-gelatin microspheres to reduce leaching risk during application

Neonicotinoid-based pesticides are extensively used owing to their broad insecticidal spectrum and activity. We developed neonicotinoid dinotefuran (DIN)-loaded chitosan-gelatin microspheres using a spray-drying technology, resulting in a pH- and temperature-responsive controlled-release system. Upon introducing chitosan into the triple-helix structure of gelatin, the physically modified gelatin microspheres became smooth, round, and solid, improving their thermal storage stability. The spray-drying parameters were optimized using three-dimensional surface plots. When scaled up under optimal conditions, the corresponding loading content and encapsulation efficiency were 21.5% and 98.17%, respectively. Compared with commercial dinotefuran granules, our biodegradable composite carriers achieved the immobilization of dinotefuran to reduce pesticide leaching by 5.57-19.89% in soil, improved the soil half-life of DIN, and improved its cumulative absorption by plants. Therefore, the microspheres showed better efficacy against Trialeurodes vaporariorum. Our results confirm that this simple approach can improve the utilization efficiency of neonicotinoids, decrease leaching loss, and promote ecological safety.

Fabrication, Structure and Functional Characterizations of pH-Responsive Hydrogels Derived from Phytoglycogen

The pH-responsive hydrogels were obtained through successive carboxymethylation and phosphorylase elongatation of phytoglycogen and their structure and functional characterizations were investigated. Phytoglycogen (PG) was first carboxymethylated to obtain carboxymethyl phytoglycogen (CM-PG) with degree of substitution (DS) at 0.15, 0.25, 0.30, and 0.40, respectively. Iodine staining and X-ray diffraction analysis suggested that the linear glucan chains were successfully phosphorylase-elongated from the non-reducing ends at the CM-PG surface and assembled into the double helical segments, leading to formation of the hydrogel. The DS of CM-PG significantly influenced elongation of glucan chains. Specifically, fewer glucan chains were elongated for CM-PG with higher DS and the final glucan chains were shorter, resulting in lower gelation rate of chain-elongated CM-PG and lower firmness of the corresponding hydrogels. Scanning electron microscope observed that the hydrogels exhibited a porous and interconnected morphology. The swelling ratio and volume of hydrogels was low at pH 3–5 and then became larger at pH 6–8 due to electrostatic repulsion resulting from deprotonated carboxymethyl groups. Particularly, the hydrogel prepared from chain-elongated CM-PG (DS = 0.25) showed the highest sensitivity to pH. These results suggested that phosphorylase-treated CM-PG formed the pH-responsive hydrogel and that the elongation degree and the properties of hydrogels depended on the carboxymethylation degree. Thus, it was inferred that these hydrogels was a potential carrier system of bioactive substances for their targeted releasing in small intestine.

Stimuli-responsive Ca-alginate-based photothermal system with enhanced foliar adhesion for controlled pesticide release

For minimizing volatilization and leaching of pesticides, and enhancing their residence time on crop surfaces, we synthesized and characterized a novel intelligent pesticide delivery system. Therein, imidacloprid (IMI) was adsorbed by polydopamine modified kaolin (PK) with high adsorption property through hydrogen bonds. Ca-alginate was used as a structural matrix of the system and a protective shell to hinder the pesticide burst release from PK, and endowed the system with unique pH-sensitive property for IMI release. The amino silicone oil (ASO) coating could bind with the waxy layer of crop leaves by the theory of "similarity-intermiscibility", which increased the adhesion of composite on crop leaves. Moreover, by the excellent light-sensitive property of detonation nanodiamond (DND) and temperature-responsive performance of poly(N-isopropylacrylamide) (PNIPAm), the release of IMI from the functional system could be adjusted by sunlight. Besides, the composite displayed high control efficacy. This novel composite can promote the targeting ability and utilization efficiency of pesticides, thus having a huge potential application prospect in agriculture.