Chitosan scaffolds with enhanced mechanical strength and elastic response by combination of freeze gelation, photo-crosslinking and freeze-drying

Cotton-like antibacterial polyacrylonitrile nanofiber-reinforced chitosan scaffold: Physicochemical, mechanical, antibacterial, and MC3T3-E1 cell viability study

Bio-scaffolds, while mimicking the morphology of native tissue and demonstrating suitable mechanical strength, enhanced cell adhesion, proliferation, infiltration, and differentiation, are often prone to failure due to microbial infections. As a result, tissue engineers are seeking ideal scaffolds with antibacterial properties. In this study, silver nanoparticles (AgNPs) were integrated into cotton-like polyacrylonitrile nanofibers via a polydopamine (PDA) interlayer (Ag@p-PAN). These Ag@p-PAN nanofibers were then incorporated into the chitosan (CS) matrix, developing an antibacterial CS/Ag@p-PAN composite scaffold. The composite scaffold features an interconnected porous morphology with fiber-infused pore walls, improved water absorption and swelling properties, a controlled degradation profile, enhanced porosity, better mechanical strength, strong antibacterial properties, and excellent MC3T3-E1 cell viability, adhesion, proliferation, and infiltration. This study presents a novel method for reinforcing CS-based scaffolds by incorporating bioactive nanofibers, offering potential applications in tissue engineering and other biomedical fields.

Glucose Oxidase-Immobilized Dually-Crosslinked Nanogels for Rapid-Responsive Insulin Delivery

Despite the potential benefits of close-looped insulin delivery systems in regulating glycemic homeostasis and effectively alleviating diabetes, they still encounter challenges such as limited effectiveness in preventing low glycemic episodes due to sluggish glucose response, and issues with the instability of enzymes and carriers. In this study, dually-crosslinked and glucose oxidase (GOx)-immobilized insulin nanogels (DC-NGs@Ins) are developed for rapid-responsive and sustained hypoglycemic therapy. The DC-NGs@Ins with the phenylborate ester linker enabled the insulin release in a close-looped fashion, and moreover, immobilized GOx-generated hydrogen peroxide (H2O2) by consuming the glucose, which can further bind to phenylborate ester for enhancing glucose response and accelerating the insulin release. The dually-crosslinked structure (phenylboronic ester and UV-crosslinking) effectively minimized the initial burst release of insulin, thus preventing the potential risk of hypoglycemia. More interestingly, GOx immobilized in the nanogels mitigated GOx leakage and enhanced its multiple utilization compared to free GOx. In vivo study demonstrated that DC-NGs@Ins effectively maintained glycemic levels (BGLs) below 200 mg dL-1 for at least 8 h compared to singly-crosslinked nanogels (SC-NGs@Ins). Therefore, this intelligent insulin delivery system shows potential applications in diabetes treatment.

Freeze-Dried β-Glucan and Poly-γ-glutamic Acid: An Efficient Stabilizer to Strengthen Subgrades of Low Compressible Fine-Grained Soils with Varying Curing Periods

The freeze-drying of biopolymers presents a fresh option with greater potential for application in soil subgrade stabilization. A freeze-dried combination of β-glucan (BG) and γ-poly-glutamic acid (GPA) biopolymers was used to treat low compressible clay (CL) and low compressible silt (ML) soils in dosages of 0.5%, 1%, 1.5%, and 2%. The California bearing ratio (CBR) test for the treated specimens was performed under three curing conditions: (i) thermal curing at 60 °C, (ii) air-curing for seven days followed by submergence for 4 days, and (iii) no curing, i.e., tested immediately after mixing. To investigate the influence of shear strength on the freeze-dried biopolymer-stabilized soil specimens and their variations with aging, unconfined compressive strength (UCS) tests were conducted after thermal curing at 60 °C for 3 days, 7 days, and 7 days of thermal curing followed by 21 days of air curing. The maximum CBR of 125.3% was observed for thermally cured CL and a minimum CBR of 6.1% was observed under soaked curing conditions for ML soils. Scanning electron microscopy (SEM), infrared spectroscopy, average particle size, permeability, and adsorption tests revealed the pore filling, biopolymer adsorption and coating on the soil surface, and agglomeration of the soil along with the presence of hydrogen bonds, covalent amide bonds, and Van der Waals forces that contributed to the stiffening of the stabilized soil. Using three-dimensional (3D) finite element analysis (FEA) and layered elastic analysis (LEA), a mechanistic-empirical pavement design was carried out for the stabilized soil and a design thickness catalog was prepared for the maximum CBR. The cost reductions for a 1 km section of the pavement were expected to be 12.5%.

Recent trends in bone tissue engineering: a review of materials, methods, and structures

Bone tissue engineering (BTE) provides the treatment possibility for segmental long bone defects that are currently an orthopedic dilemma. This review explains different strategies, from biological, material, and preparation points of view, such as using different stem cells, ceramics, and metals, and their corresponding properties for BTE applications. In addition, factors such as porosity, surface chemistry, hydrophilicity and degradation behavior that affect scaffold success are introduced. Besides, the most widely used production methods that result in porous materials are discussed. Gene delivery and secretome-based therapies are also introduced as a new generation of therapies. This review outlines the positive results and important limitations remaining in the clinical application of novel BTE materials and methods for segmental defects.

Optimizing Encapsulation: Comparative Analysis of Spray-Drying and Freeze-Drying for Sustainable Recovery of Bioactive Compounds from Citrus x paradisi L. Peels

Spray-drying and freeze-drying are indispensable techniques for microencapsulating biologically active compounds, crucial for enhancing their bioavailability and stability while protecting them from environmental degradation. This study evaluates the effectiveness of these methods in encapsulating Citrus x paradisi L. (grapefruit) peel extract, focusing on sustainable recovery from waste peels. Key objectives included identifying optimal wall materials and assessing each encapsulation technique's impact on microencapsulation. The investigation highlighted that the choice of wall material composition significantly affects the microencapsulation's efficiency and morphological characteristics. A wall material mixture of 17 g maltodextrin, 0.5 g carboxymethylcellulose, and 2.5 g β-cyclodextrin was optimal for spray drying. This combination resulted in a sample with a wettability time of 1170 (s), a high encapsulation efficiency of 91.41%, a solubility of 60.21%, and a low moisture content of 5.1 ± 0.255%. These properties indicate that spray-drying, particularly with this specific wall material composition, offers a durable structure and can be conducive to prolonged release. Conversely, varying the precise compositions used in the freeze-drying process yielded different results: quick wettability at 132.6 (s), a solubility profile of 61.58%, a moisture content of 5.07%, and a high encapsulation efficiency of 78.38%. The use of the lyophilization technique with this latter wall material formula resulted in a more porous structure, which may facilitate a more immediate release of encapsulated compounds and lower encapsulation efficiency.

Chitosan: Structural and Chemical Modification, Properties, and Application

Chitosan is a polymer of natural origins that possesses many favourable properties [...].

Biomaterials and Encapsulation Techniques for Probiotics: Current Status and Future Prospects in Biomedical Applications

Probiotics have garnered significant attention in recent years due to their potential advantages in diverse biomedical applications, such as acting as antimicrobial agents, aiding in tissue repair, and treating diseases. These live bacteria must exist in appropriate quantities and precise locations to exert beneficial effects. However, their viability and activity can be significantly impacted by the surrounding tissue, posing a challenge to maintain their stability in the target location for an extended duration. To counter this, researchers have formulated various strategies that enhance the activity and stability of probiotics by encapsulating them within biomaterials. This approach enables site-specific release, overcoming technical impediments encountered during the processing and application of probiotics. A range of materials can be utilized for encapsulating probiotics, and several methods can be employed for this encapsulation process. This article reviews the recent advancements in probiotics encapsulated within biomaterials, examining the materials, methods, and effects of encapsulation. It also provides an overview of the hurdles faced by currently available biomaterial-based probiotic capsules and suggests potential future research directions in this field. Despite the progress achieved to date, numerous challenges persist, such as the necessity for developing efficient, reproducible encapsulation methods that maintain the viability and activity of probiotics. Furthermore, there is a need to design more robust and targeted delivery vehicles.

Polymeric Wet-Strength Agents in the Paper Industry: An Overview of Mechanisms and Current Challenges

Polymeric wet-strength agents are important additives used in the paper industry to improve the mechanical properties of paper products, especially when they come into contact with water. These agents play a crucial role in enhancing the durability, strength, and dimensional stability of paper products. The aim of this review is to provide an overview of the different types of wet-strength agents available and their mechanisms of action. We will also discuss the challenges associated with the use of wet-strength agents and the recent advances in the development of more sustainable and environmentally friendly agents. As the demand for more sustainable and durable paper products continues to grow, the use of wet-strength agents is expected to increase in the coming years.

GelMA/κ-carrageenan double-network hydrogels with superior mechanics and biocompatibility

Hydrogels are crosslinked hydrophilic polymer networks of high-water content. Although they have been widely investigated, preparing hydrogels with excellent mechanical properties and biocompatibility remains a challenge. In the present work, we developed a novel GelMA/κ-carrageenan (GelMA/KC) double network (DN) hydrogel through a dual crosslinking strategy. The three-dimensional (3D) microstructure of KC is the first network, and covalently crosslinked on the κ-carrageenan backbone is the second network. The GelMA/KC hydrogel shows advantages in physical properties, including higher compression strength (10% GelMA/1% KC group, 130 kPa) and Young's modulus (10% GelMA/1% KC group, 300), suggesting its excellent elasticity and compressive capability. When using a higher concentration of GelMA, the hybrid hydrogel has even higher mechanical properties. In addition, the GelMA/KC hydrogel is favorable for cell spreading and proliferation, demonstrating its excellent biocompatibility. This study provides a new possibility for a biodegradable and high-strength hydrogel as a new generation material of orthopedic implants.

Effects of Neutralization on the Physicochemical, Mechanical, and Biological Properties of Ammonium-Hydroxide-Crosslinked Chitosan Scaffolds

It has been reported that chitosan scaffolds, due to their physicochemical properties, stimulate cell proliferation in different tissues of the human body. This study aimed to determine the physicochemical, mechanical, and biological properties of chitosan scaffolds crosslinked with ammonium hydroxide, with different pH values, to better understand cell behavior depending on the pH of the biomaterial. Scaffolds were either neutralized with sodium hydroxide solution, washed with distilled water until reaching a neutral pH, or kept at alkaline pH. Physicochemical characterization included scanning electron microscopy (SEM), elemental composition (EDX), Fourier-transform infrared (FTIR) spectroscopy, Raman spectroscopy, thermogravimetric analysis (TGA), and mechanical testing. In vitro cytotoxicity was assessed via dental-pulp stem cells' (DPSCs') biocompatibility. The results revealed that the neutralized scaffolds exhibited better cell proliferation and morphology. It was concluded that the chitosan scaffolds' high pH (due to residual ammonium hydroxide) decreases DPSCs' cell viability.

Neat Chitosan Porous Materials: A Review of Preparation, Structure Characterization and Application

This review presents an overview of methods for preparing chitosan-derived porous materials and discusses their potential applications. This family of materials has garnered significant attention owing to their biocompatibility, nontoxicity, antibacterial properties, and biodegradability, which make them advantageous in a wide range of applications. Although individual porous chitosan-based materials have been widely discussed in the literature, a summary of all available methods for preparing materials based on pure chitosan, along with their structural characterization and potential applications, has not yet been presented. This review discusses five strategies for fabricating porous chitosan materials, i.e., cryogelation, freeze-drying, sol-gel, phase inversion, and extraction of a porogen agent. Each approach is described in detail with examples related to the preparation of chitosan materials. The influence of the fabrication method on the structure of the obtained material is also highlighted herein. Finally, we discuss the potential applications of the considered materials.

Size-adjustable self-assembled nanoparticles through microfluidic platform promotes neuronal differentiation of mouse embryonic stem cells

Neuronal differentiation from stem cells is one of the most potent therapeutic approaches for recovering neurological function in individuals with neurodegenerative disorders. Herein, an on-demand intracellular retinoic acid released nanoparticles with tunable size and accurately controlled physico-biological properties have been prepared for achieving efficient neuronal differentiation. The amphiphilic chitosan oligosaccharide-cholesterol copolymers were synthesized by varying cholesterol content and self-assembled into spherical micelle in a microfluidic chip with different flow rates. Notably, the results indicated that by increasing the lipophilicity of the chitosan chain as well as mixing rate, the size of micelles was decreased. Retinoic acid (RA) was efficiently encapsulated in the core of micelles. The retinoic acid-containing nanoparticles could escape lysosome, accumulate in the cytoplasm, and release payload with a sustained pattern. The cytotoxicity assay of free retinoic acid and retinoic acid-loaded formulations against P19 embryonic stem cells confirmed the desirable safety of micelles. The result obtained from the uptake study showed that internalization of micelles occurs predominantly via lipid-raft endocytosis in the presence of higher cholesterol content. Moreover, the intracellular RA release upregulated the expression levels of neuronal factors. The micelles described here offer a promising nanomedicine strategy for neuronal differentiation of stem cells.

Low temperature hybrid 3D printing of hierarchically porous bone tissue engineering scaffolds with in situ delivery of osteogenic peptide and mesenchymal stem cells

Comparing to other conventional fabrication techniques, 3D printing is advantageous in producing bone tissue engineering scaffolds with customized shape, tailored pore size/porosity, required mechanical properties and even desirable biomolecule delivery capability. However, towards scaffolds with a large volume, it is highly difficult to enable seed cells to migrate to the central region of the scaffolds, resulting in an inhomogeneous cell distribution, and hence lowering the bone forming ability. To address this problem, in this investigation, cell-laden bone tissue engineering scaffolds consisting of osteogenic peptide loaded β-tricalcium phosphate/poly(lactic-co-glycolic acid) (OP/TCP/PLGA) nanocomposite scaffolds and rat bone marrow derived mesenchymal stem cells (rBMSCs)-laden Gelatin/GelMA hydrogel fillers were produced through a "dual-nozzle" cryogenic hybrid 3D printing. The cell-laden scaffolds exhibited a bi-phasic structure and were mechanically similar to human cancellous bone. OP can be released from the hybrid scaffolds in a sustained manner. rBMSCs laden in the hydrogel patterns exhibited a high viability during and after cryogenic hybrid 3D printing process and can be further released from the hydrogel struts and achieve cell anchorage on the surface of adjacent OTP struts. The OP released from OTP struts enhanced rBMSCs proliferation. Comparing to rBMSC-laden hybrid scaffolds without OP incorporation, the rBMSC-laden hybrid scaffolds incorporated with OP significantly up-regulated the osteogenic differentiation of rBMSCs, by showing a higher level of alkaline phosphatase (ALP) expression and calcium deposition. This "proof-ofconcept" study provided a facile method to form cell-laden bone tissue engineering scaffolds with not only required mechanical strength, biomimetic structure and prolonged biomolecule release but also excellent cell delivery capability with uniform cell distribution.

Exploring the Impact of Chitosan Composites as Artificial Organs

Chitosan and its allies have in multiple ways expanded into the medical, food, chemical, and biological industries and is still expanding. With its humble beginnings from marine shell wastes, the deacetylated form of chitin has come a long way in clinical practices. The biomedical applications of chitosan are truly a feather on its cap, with rarer aspects being chitosan’s role in tissue regeneration and artificial organs. Tissue regeneration is a highly advanced and sensitive biomedical application, and the very fact that chitosan is premiering here is an authentication of its ability to deliver. In this review, the various biomedical applications of chitosan are touched on briefly. The synthesis methodologies that are specific for tissue engineering and biomedical applications have been listed. What has been achieved using chitosan and chitosan composites in artificial organ research as well as tissue regeneration has been surveyed and presented. The lack of enthusiasm, as demonstrated by the very few reports online with respect to chitosan composites and artificial organs, is highlighted, and the reasons for this lapse speculated. What more needs be done to expand chitosan and its allies for a better utilization and exploitation to best benefit the construction of artificial organs and building of tissue analogs has been discussed.

Starch Solutions Prepared under Different Conditions as Modifiers of Chitosan/Poly(aspartic acid)-Based Hydrogels

Recently, there has been great interest in the application of polysaccharides in the preparation of diverse biomaterials which result from their biocompatibility, biodegradability and biological activity. In this work, the investigations on chitosan/poly(aspartic acid)-based hydrogels modified with starch were described. Firstly, a series of hydrogel matrices was prepared and investigated to characterize their swelling properties, structure via FT-IR spectroscopy, elasticity and tensile strength using the Brookfield texture analyzer as well as their impact on simulated physiological liquids. Hydrogels consisting of chitosan and poly(aspartic acid) in a 2:1 volume ratio were elastic (9% elongation), did not degrade after 30-day incubation in simulated physiological liquids, exhibited a relative biocompatibility towards these liquids and similar swelling in each absorbed medium. This hydrogel matrix was modified with starch wherein two of its form were applied-a solution obtained at an elevated temperature and a suspension obtained at room temperature. Hydrogels modified with hot starch solution showed higher sorption that unmodified materials. This was probably due to the higher starch inclusion (i.e., a larger number of hydrophilic groups able to interact with the adsorbed liquid) when this polysaccharide was given in the form of a hot solution. Hydrogels modified with a cold starch suspension had visible heterogeneous inequalities on their surfaces and this modification led to the obtainment materials with unrepeatable structures which made the analysis of their properties difficult and may have led to misleading conclusions.