CaCO3-coated PVA/BC-based composite for the simultaneous adsorption of Cu(II), Cd(II), Pb(II) in aqueous solution

Zirconium‑cerium modified polyvinyl alcohol/NaCMC biocomposite film: Synthesis of films through high-speed shear assisted technique and removal fluoride from water

A new zirconium and cerium-modified polyvinyl alcohol (PVA) sodium carboxymethyl cellulose (NaCMC) film (PVA/CMC-Zr-Ce) was synthesized thru a high-speed shear-assisted method and its adsorption for the removal of fluoride was studied, in which the NaCMC provided -COONa for ion exchange between Na and Zr-Ce, thus the loading amount of Zr-Ce on films was accordingly increased. The morphology and structure of PVA/CMC-Zr-Ce were characterized using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). Besides, the mechanical properties, water contact angle, and swelling ratio of film were also evaluated. The addition of high-speed shear improved the dispersion of the emulsion system, and PVA/CMC-Zr-Ce film with good adsorption performance and film stability was prepared. While, it was found that the adsorption capacity could reach 67.25 mg/g and equilibrium time could reach 20 min. The adsorption mechanism of PVA/CMC-Zr-Ce revealed that ion exchange between hydroxide and fluoride, electrostatic interactions and complexation were the dominating influencing factors. Based on these findings, it can be concluded that PVA/CMC-Zr-Ce film- synthesized with high-speed shear assistance technique is a promising adsorbent for fluoride removal from water.

Green and effective remediation of heavy metals contaminated water using CaCO3 vaterite synthesized through biomineralization

Heavy metal pollution has attracted significant attention due to its persistent presence in aquatic environments. A novel vaterite-based calcium carbonate adsorbent, named biogenic CaCO3, was synthesized utilizing a microbially induced carbonate precipitation (MICP) method to remediate heavy metal-contaminated water. The maximum Cd2+ removal capacity of biogenic CaCO3 was 1074.04 mg Cd2+/g CaCO3 with a high Cd2+ removal efficiency greater than 90% (initial Cd2+ concentration 400 mg/L). Furthermore, the biogenic CaCO₃ vaterite, induced by microbial-induced calcium carbonate precipitation (MICP) process, demonstrated a prolonged phase transformation to calcite and enhanced stability. This resulted in a sustained high effectiveness (greater than 96%) following six consecutive recycling tests. Additionally, X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses revealed that the semi-stable vaterite type of biogenic CaCO3 spontaneously underwent dissolution and recrystallization to form thermodynamic stable calcite in aquatic environments. However, the presence of Cd2+ leads to the transformation of vaterite into CdCO3 rather than undergoing direct converting to calcite. This transformation is attributed to the relatively low solubility of CdCO3 compared to calcite. Meanwhile, the biogenic CaCO3 proved to be an efficient and viable method for the removal of Pb2+, Cu2+, Zn2+, Co2+, Ni2+ and Mn2+ from water samples, surpassing the performance of previously reported adsorbents. Overall, the efficient and promising adsorbent demonstrates potential for practical in situ remediation of heavy metals-contaminated water.

A novel oyster shell biocomposite for the efficient adsorptive removal of cadmium and lead from aqueous solution: Synthesis, process optimization, modelling and mechanism studies

This study highlights the effectiveness of oyster shell biocomposite for the biosorption of Cd(II) and Pb(II) ions from an aqueous solution. The aim of this work was to modify a novel biocomposite derived from oyster shell for the adsorption of Cd(II) and Pb(II) ions from aqueous solution. The studied revealed the specific surface BET surface area was 9.1476 m2/g. The elemental dispersive x-ray analysis (EDS) indicated that C, O, Ag, Ca were the predominant elements on the surface of the biocomposite after which metals ions of Cd and Pb were noticed after adsorption. The Fourier transform Irradiation (FT-IR) revealed the presence of carboxyl and hydroxyl groups on the surface. The effect of process variables on the adsorption capacity of the modified biocomposite was examined using the central composite design (CCD) of the response surface methodology (RSM). The process variables which include pH, adsorbent dose, the initial concentration and temperature were the most effective parameters influencing the uptake capacity. The optimal process conditions of these parameters were found to be pH, 5.57, adsorbent dose, 2.53 g/L, initial concentration, 46.76 mg/L and temperature 28.48°C for the biosorption of Cd(II) and Pb(II) ions from aqueous solution at a desirability coefficient of 1. The analysis of variance (ANOVA) revealed a high coefficient of determination (R2 > 0.91) and low probability coefficients for the responses (P < 0.05) which indicated the validity and aptness of the model for the biosorption of the metal ions. Experimental isotherm data fitted better to the Langmuir model and the kinetic data fitted better to the pseudo-second-order model. Maximun Cd(II) and Pb(II) adsorption capacities of the oyster shell biocomposite were 97.54 and 78.99 mg/g respectively and was obtained at pH 5.56 and 28.48°C. This investigation has provided the possibility of the utilization of alternative biocomposite as a sustainable approach for the biosorption of heavy metal ions from the wastewater stream.

Algae extract delamination of molybdenum disulfide and surface modification with glycidyl methacrylate and polyaniline for the elimination of metal ions from wastewater

A special type of two-dimensional (2D) material based conducting polymer was constructed by green synthesis and in-situ polymerization techniques. The 2D Molybdenum Disulfide (MoS₂) were first synthesized with the combination of, ammonium tetrathiomolybdate dissolved in 20 mL algae extract under stirring. After stirring for about 2 h, and then finally sulfurization was initiated using sulfur powder in 20 mL of sulfuric solution and stirred for 8 h. The resulting black precipitates of MoS₂ were collected by centrifugation at 5000 rpm. Moreover, the prepared MoS₂ was functionalized with glycidyl methacrylate (GMA) and form the MoS₂@PGMA. Further, the MoS₂@PGMA is combined with polyaniline (PANI) to form conducting polymer grafted thin film nanosheets named MoS₂@PGMA/PANI with a thickness in micrometer size through grafting method. The prepared materials were characterized by SEM, FTIR, XRD, XPS and EDX techniques. To check the performance of materials the adsorption study was performed. Moreover, the adsorption study toward Cu²⁺ and Cd²⁺ showed a tremendous results and the maximum adsorption was 307.7 mg/g and 214.7 mg/g respectively. In addition, the pseudo-first and second order models as well as the adsorption isotherm were investigated using the Langmuir and Freundlich model. The results were best fitted with the pseudo-second order and Langmuir models. The regeneration study was also conducted and MoS₂@PGMA/PANI nanosheets can be easily recycled and restored after five successful recycling. The established methodology for preparing the 2D materials and conducting polymer based MoS₂@PGMA/PANI nanosheets is expected to be applicable for other multiple applications.

"Killing two birds with one stone": A fluorescent hybrid nanoparticle modified with BODIPY for efficiently detection and removal of toxic Cu (II) ion from aqueous solutions

In this paper, we successfully synthesized a fluorescent hybrid material (f-Silica gel) for the removal and recognition of cations. A Bodipy derivative was used as a source of fluorescent material. The characterization of Bodipy derivative and the modified surfaces were performed by some techniques like NMR, XRD, SEM, and FT-IR. The spectroscopic studies (complex stoichiometry, pH effect, response time) were carried out with fluorescence spectroscopy for the sensitive and selective recognition of Cu (II) ions. The LOD (limit of detection) was calculated as 4.63 μM and the most optimum response time was determined as 25 min. Moreover, the complex interaction between f-Silica gel and Cu (II) ions stables generally in the range of pH: 1-12. f-Silica gel can be also used as a solid support surface to remove Cu (II) ions from the wastewater. The adsorption kinetics and isotherms of Cu (II) on the f-Silica gel were determined with several parameters such as the amount of adsorbent, temperature, and pH. Langmuir adsorption isotherm model was performed for the adsorption of Cu (II) ions and the maximum capacity was found to be 19. 920 mg/g. The kinetic data ensured that the R² value was obtained as 0.9941 from the kinetic model (pseudo-second-order). Thus, it is very close to the desired value (1) and the value of q_e(expe) is very close to the value of q_e(calc). The thermodynamic results support the spontaneous, random, and endothermic adsorption process. All results indicated that the hybrid material can be used as both a sensor and an adsorbent for the detection and removal of Cu (II) ions in environmental processes.

Modification of silica nanoparticles by 2,4-dihydroxybenzaldehyde and 5-bromosalicylaldehyde as new nanocomposites for efficient removal and preconcentration of Cu(ii) and Cd(ii) ions from water, blood, and fish muscles

Herein, silica nanoparticles were modified by 2,4-dihydroxybenzaldehyde and 5-bromosalicylaldehyde to produce new nanocomposites which were abbreviated as N₁ and N₂, respectively. The synthesized nanocomposites were used for efficient removal and preconcentration of Cu(ii) and Cd(ii) ions from water, blood, and fish muscles. FE-SEM, FT-IR, XRD, CHN elemental analysis, and nitrogen gas sorption analyzer were used to characterize the new nanocomposites. The XRD proved that the synthesized oxide is cristobalite with an average crystallite size of 54.80 nm. Due to the formation of the C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> N group, the intensity of the XRD peak at 2θ = 21.9° in the N₁ and N₂ nanocomposites decreased significantly. The FT-IR bands, which appeared at 1603 and 1629 cm⁻¹ in the N₁ and N₂ nanocomposites, are attributable to the bending vibration of CN and/or OH, respectively. Also, the FE-SEM analysis shows the morphology of the silica nanoparticles which were identified as spherical and rod-like with slight agglomeration while the N₁ and N₂ nanocomposites have flaky surfaces due to the formation of CN groups. The maximum Cu(ii) ion adsorption capacities of the N₁ and N₂ nanocomposites are 64.81 and 40.93 mg g⁻¹, respectively. The maximum Cd(ii) ion adsorption capacities of the N₁ and N₂ nanocomposites are 27.39 and 26.34 mg g⁻¹, respectively. The adsorption of Cu(ii) or Cd(ii) ions using the synthesized nanocomposites is spontaneous, chemical, exothermic, and well-matched with the Langmuir equilibrium isotherm. The recovery findings demonstrate that the preconcentration process is accurate, adaptable, and resulted in quantitative separation because % Recovery is more than 95%. Furthermore, the % RSD was less than 3.5%, indicating good reproducibility.

Herein, silica nanoparticles were modified by 2,4-dihydroxybenzaldehyde and 5-bromosalicylaldehyde to produce new nanocomposites which were abbreviated as N₁ and N₂, respectively.

Bismuth impregnated biochar for efficient uranium removal from solution: Adsorption behavior and interfacial mechanism

In this work, Bi₂O₃ doped horse manure-derived biochar was obtained by carbonizing the H₂O₂-modified horse manure loaded with bismuth nitrate under nitrogen atmosphere at 500 °C. The results showed that there was a sharp response between the as-prepared bismuth impregnated biochar and uranium(VI) species in solution, which resulted in a short equilibrium time (<80 min), a fast adsorption rate (about 5.0 mg/(g·min)), a high removal efficiency (93.9%) and a large adsorption capacity (516.5 mg/g) (T = 298 K, pH = 4, C_i = 10 mg/L and m/V = 0.1 g/L). Besides, the removal behavior of the bismuth impregnated biochar for uranium(VI) did not depend on the interfering ions and ion strength, except Al³⁺, Ca²⁺, CO₃^2- and PO₄^3-. These results indicated that the modified biochar might possess the potential of remediating the actual uranium(VI)-containing wastewater. Moreover, the interaction mechanism between Bi₂O₃ doped biochar and uranium(VI) species was further explored. The results demonstrated that the enrichment of uranium(VI) on the surface of the as-prepared biochar was controlled by various factors, such as surface complexation, ion exchange, electrostatic attraction, precipitation and reduction, which facilitated the adsorption of uranium(VI) on the bismuth impregnated biochar.

Single and binary adsorption of lead and cadmium ions in aqueous solutions and river water by butylamine functionalized vermiculite: performance and mechanism

Lead and cadmium are toxic to human, animal, and plant health; they enhance oxidative stress indirectly while simultaneously acting through other toxicodynamic mechanisms. In this study, pristine vermiculite (VER) was functionalized with butylamine (BUT) and a novel organoclay (BUT-VER) adsorbent material was produced for simultaneous removal of Pb(II) and Cd(II) in aquatic medium. The adsorbents were characterized by spectroscopic, microscopic, spectrometric, and potentiometric techniques. The adsorption affecting parameters, including pH, time, initial concentration, temperature, and co-existing cations were investigated and optimized. The kinetic data results were in better agreement with pseudo-second-order (PSO) model (R² > 0.992). Multiple isotherm models were used to study the adsorption system and results showed that adsorption was monolayer. The BUT-VER showed an improvement in adsorption capacity in a single system (Pb(II): from 134.2 to 160.6 mg g^-1) and (Cd(II): from 51.1 to 58.9 mg g^-1) while in binary system (Pb(II): from 107.3 to 114.5 mg g^-1) and (Cd(II): from 33.7 to 39.7 mg g^-1), respectively. Furthermore, BUT-VER was tested in real river water and removed efficiency of >99% was achieved in just 1 h. The dominant mechanisms were electrostatic attraction and complexation. BUT-VER was regenerated for five consecutive cycles and showed >90% removal efficiency. These findings suggest that the proposed inexpensive adsorbent has the potential for practical applications of toxic metals removal from water.