Cellulosic films reinforced by chitosan-citric complex for meat preservation: Influence of nonenzymatic browning

Effect of freeze-thaw processes on the water-absorption ability and mechanical properties of hydrogel pads with chitosan/poly(vinyl alcohol) based on citrate crosslinks

In this study, the effect of freeze-thaw (F-T) processes on the mechanical and water absorption performance of citrate cross-linked chitosan/poly(vinyl alcohol) hydrogel pads was evaluated. An excellent cross-linking of 4 % (w/w) citrate was indicated by enhanced peak strength in Fourier-transform infrared spectroscopy and X-ray diffraction patterns, which was applied to the subsequent F-T process. The results in the deswelling rate, water contact angle, and relaxation time of samples exhibited a tendency to decrease and then increase with increasing F-T cycles, reaching a minimum of 0.08, 16.48°, and 3.92 ms in the third cycle, respectively. The swelling rate showed opposite trends with a maximum of 5.92. In addition, scanning electron microscopy observation and mechanical testing confirmed homogeneous pore structure and excellent mechanical properties during the third cycle. This study can provide technical support for fabricating hydrogel absorbent pads and their application in meat products.

Centrifugal Spinning-Derived Biomimetic Aerogel for Rapid Hemostasis with Minimal Blood Loss

For emergency treatment, especially in situations where rapid and effective hemostasis is required beyond the natural clotting mechanisms, advanced materials designed to reduce bleeding time and minimize blood loss have become an urgent need. Herein, a root hair-inspired aerogel is developed, which is characterized by a 99.99% interconnected pore structure and a three-dimensional network constructed by blocked aqueous isocyanates cross-linked grooved cellulose acetate and wrinkled thermoplastic polyurethane fibers via centrifugal spinning. The aerogel exhibits enhanced water absorption and minimal blood adsorption through rapid coagulation cascade activation. In vivo studies using rat tail, hepatic, and renal injury models demonstrate a substantial reduction in blood loss (∼94%) and hemostasis time (∼78%) compared to commercial hemostats. The developed aerogel offers a promising solution for urgent hemorrhage control.

Acrylpimaric acid-modified chitosan derivatives as potential antifungal agents against Valsa Mali

In order to the antifungal activity of chitosan (CS) and to obtain a better natural bio-antimicrobial agent, CS was modified with acrylpimaric acid (APA). The grafting sites of APA on CS were controlled by adjusting the reaction time and the ratio of reactants to obtain APA grafted with CS C2-NH2 (NCSAA) and C6-OH (CSAA). Intermediates to protect C2-NH2 (PMCSAA) and final sample derivatives (PCSAA) were prepared using phthalic anhydride. The structural and crystal variations of the four derivatives were analyzed and determined by FTIR, 1H NMR and XRD. The in vitro antifungal activities of the four modified samples against V. mali, C. lunata, A. solani, F. oxysporum f. sp. niveum, and F. graminearum were evaluated by the mycelial growth rate method, and PCSAA was screened for optimal inhibitory effect on V. mali with an EC50 = 38.66 μg/mL. The SEM and TEM showed that these derivatives cause the loss of mycelial contents by disrupting the ultrastructure of the mycelium, destroying the internal structure of the mycelium, and preventing the cells from carrying out their normal life activities. In vivo experiments showed better curative effect (79.09 % ± 2.00) and protective effect (80.93 % ± 0.03) of PCSAA at 200 μg/mL.

The Beneficial Role of Polysaccharide Hydrocolloids in Meat Products: A Review

Polysaccharide hydrocolloids have garnered increasing attention from consumers, experts, and food processing industries due to their advantages of abundant resources, favorable thickening properties, emulsification stability, biocompatibility, biodegradability, and high acceptance as food additives. This review focuses on the application of polysaccharide hydrocolloids and their beneficial roles in meat products by focusing on several commonly used polysaccharides (i.e., cellulose, chitosan, starch, sodium alginate, pectin, and carrageenan). Firstly, the recent advancements of polysaccharide hydrocolloids used in meat products are briefly introduced, along with their structure and potential application prospects. Then, the beneficial roles of polysaccharide hydrocolloids in meat products are comprehensively summarized and highlighted, including retarding lipid and protein oxidation, enhancing nutritional properties, improving texture and color quality, providing antibacterial activity, monitoring freshness, acting as a cryoprotectant, improving printability, and ensuring security. Finally, the challenges and opportunities of polysaccharide hydrocolloids in meat products are also introduced.

Enhancing refrigerated chicken breasts preservation: Novel composite hydrogels incorporated with antimicrobial peptides, bacterial cellulose, and polyvinyl alcohol

Microbial contamination annually leads to substantial food resource loss. Effective food packaging can mitigate food contamination and waste, yet conventional materials such as plastics often lack bacteriostatic activity. This study aimed to synthesise FengycinA-M3@bacterial cellulose@polyvinyl alcohol composite hydrogels via dual cross-linking with hydrogen and borate bonding, with the goal of enhancing antibacterial properties and prolonging the preservation period of refrigerated chicken breast. The composite hydrogel was subjected to comprehensive characterisation for structural, mechanical, water absorption, slow peptide release, antimicrobial capacity, biocompatibility, and chicken breast freshness preservation. The results showed that the composite hydrogel had a porous network structure and excellent gel elasticity and biocompatibility. It was effective in inhibiting Staphylococcus aureus and Escherichia coli, and prolonged the storage time of frozen chicken breast for up to 12 days. These findings emphasise the potential of hydrogel food packaging to prolong storage periods and its suitability for food industry applications due to ease of manufacture.

Preparation, characterization, and application of gallic acid-mediated photodynamic chitosan-nanocellulose-based films

In this study, an active film composed of gallic acid (GA), chitosan (CS), and cellulose nanocrystals (CNC) was prepared using a solution casting method and synergistic photodynamic inactivation (PDI) technology. Characterization of the film showed that the CS-CNC-GA composite film had high transparency and UV-blocking ability. The addition of GA (0.2 %-1.0 %) significantly enhanced the mechanical properties, water resistance, and thermal stability of the film. The tensile strength increased up to 46.30 MPa, and the lowest water vapor permeability was 1.16 × e-12 g/(cm·s·Pa). The PDI-treated CS-CNC-GA1.0 composite film exhibited significantly enhanced antibacterial activity, with inhibition zone diameters of 31.83 mm against Staphylococcus aureus and 21.82 mm against Escherichia coli. The CS-CNC-GA composite film also showed good antioxidant activity. Additionally, the CS-CNC-GA1.0 composite film generated a large amount of singlet oxygen under UV-C light irradiation. It was found that using the CS-CNC-GA1.0 composite film for packaging and storage of oysters at 4 °C effectively delayed the increase in pH, total colony count, and lipid oxidation in oysters. In conclusion, the CS-CNC-GA composite film based on PDI technology has great potential for applications in the preservation of aquatic products.

Paper-based material with hydrophobic and antimicrobial properties: Advanced packaging materials for food applications

The environmental challenges posed by plastic pollution have prompted the exploration of eco-friendly alternatives to disposable plastic packaging and utensils. Paper-based materials, derived from renewable resources such as wood pulp, non-wood pulp (bamboo pulp, straw pulp, reed pulp, etc.), and recycled paper fibers, are distinguished by their recyclability and biodegradability, making them promising substitutes in the field of plastic food packaging. Despite their merits, challenges like porosity, hydrophilicity, limited barrier properties, and a lack of functionality have restricted their packaging potential. To address these constraints, researchers have introduced antimicrobial agents, hydrophobic substances, and other functional components to improve both physical and functional properties. This enhancement has resulted in notable improvements in food preservation outcomes in real-world scenarios. This paper offers a comprehensive review of recent progress in hydrophobic antimicrobial paper-based materials. In addition to outlining the characteristics and functions of commonly used antimicrobial substances in food packaging, it consolidates the current research landscape and preparation techniques for hydrophobic paper. Furthermore, the paper explores the practical applications of hydrophobic antimicrobial paper-based materials in agricultural produce, meat, and seafood, as well as ready-to-eat food packaging. Finally, challenges in production, application, and recycling processes are outlined to ensure safety and efficacy, and prospects for the future development of antimicrobial hydrophobic paper-based materials are discussed. Overall, the emergence of hydrophobic antimicrobial paper-based materials stands out as a robust alternative to plastic food packaging, offering a compelling solution with superior food preservation capabilities. In the future, paper-based materials with antimicrobial and hydrophobic functionalities are expected to further enhance food safety as promising packaging materials.

The Construction of Sodium Alginate/Carboxymethyl Chitosan Microcapsules as the Physical Barrier to Reduce Corn Starch Digestion

To enhance the resistant starch (RS) content of corn starch, in this work, carboxymethyl chitosan/corn starch/sodium alginate microcapsules (CMCS/CS/SA) with varying concentrations of SA in a citric acid (CA) solution were designed. As the SA concentration increased from 0.5% to 2%, the swelling of the CMCS/CS/SA microcapsule decreased from 15.28 ± 0.21 g/g to 3.76 ± 0.66 g/g at 95 °C. Comparatively, the onset, peak, and conclusion temperatures (To, Tp, and Tc) of CMCS/CS/SA microcapsules were higher than those of unencapsulated CS, indicating that the dense network structure of microcapsules reduced the contact area between starch granules and water, thereby improving thermal stability. With increasing SA concentration, the intact and dense network of CMCS/CS/SA microcapsules remained less damaged after 120 min of digestion, suggesting that the microcapsules with a high SA concentration provided better protection to starch, thereby reducing amylase digestibility. Moreover, as the SA concentration increased from 0.5% to 2%, the RS content of the microcapsules during in vitro digestion rose from 42.37 ± 0.07% to 57.65 ± 0.45%, attributed to the blocking effect of the microcapsule shell on amylase activity. This study offers innovative insights and strategies to develop functional starch with glycemic control properties, holding significant scientific and practical value in preventing diseases associated with abnormal glucose metabolism.

Harnessing the Potential of Chitosan and Its Derivatives for Enhanced Functionalities in Food Applications

As one of the most abundant natural polysaccharides that possess good biological activity, chitosan is extracted from chitin. Its application in the food field is being increasingly valued. However, chitosan extraction is difficult, and its poor solubility limits its application. At present, the extraction methods include the acid-base method, new chemical methods, and biological methods. The extraction rates of chitin/chitosan are 4-55%, 13-14%, and 15-28%, respectively. Different chemical modifications have different effects on chitosan, making it applicable in different fields. This article reviews and compares the extraction and chemical modification methods of chitosan, emphasizing the importance of green extraction methods. Finally, the application prospects of chitosan in the food industry are discussed. This will promote the understanding of the advantages and disadvantages of different extraction methods for chitosan as well as the relationship between modification and application, providing valuable insights for the future development of chitosan.

An overview of the potential application of chitosan in meat and meat products

Chitosan is considered the second most ubiquitous polysaccharide next to cellulose. It has gained prominence in various industries including biomedicine, textile, pharmaceutical, cosmetic, and notably, the food industry over the last few decades. The polymer's continual attention within the food industry can be attributed to the increasing popularity of greener means of packaging and demand for foods incorporated with natural alternatives instead of synthetic additives. Its antioxidant, antimicrobial, and film-forming abilities reinforced by the polymer's biocompatible, biodegradable, and nontoxic nature have fostered its usage in food packaging and preservation. Microbial activity and lipid oxidation significantly influence the shelf-life of meat, resulting in unfavorable changes in nutritional and sensory properties during storage. In this review, the scientific studies published in recent years regarding potential applications of chitosan in meat products; and their effects on shelf-life extension and sensory properties are discussed. The utilization of chitosan in the form of films, coatings, and additives in meat products has supported the extension of shelf-life while inducing a positive impact on their organoleptic properties. The nature of chitosan and its compatibility with various materials make it an ideal biopolymer to be used in novel arenas of food technology.

Furoic acid-mediated konjac glucomannan/flaxseed gum based green biodegradable antibacterial film for Shine-Muscat grape preservation

Considering the growing threats to the environment and human health, such as plastic pollution and food spoilage, the development of naturally antibacterial food packaging materials with biodegradable capabilities has recently attracted considerable attention. This work applies the concept of green environmental protection to packaging technology, and a new type of green edible antibacterial packaging film was developed. The basic idea is to incorporate furoic acid (FA), which possesses excellent antibacterial activity, into the flaxseed gum and konjac glucomannan matrix (FK) as a filler to obtain a series of FK-FA bioactive films. This incorporation simultaneously improves the hydrophobicity and UV-barrier ability by 12.28 % and 42.87 %, respectively. Meanwhile, the diameters of the antibacterial zone of the FK-FA0.4% films (composite FK films containing 0.4 % FA) against E. coli and S. aureus increased to 38.98 mm and 36.29 mm from 24.00 mm of pure FK film, respectively. As a consequence, the grape sample sealed with FK-FA0.4% film remained edible on the 18th day of storage, while those packaged with commercial PE film and pure FK were seriously rotted and lost edible value on the 12th day, further confirming the enhanced preservation capacity. Finally, the as-prepared films were established to be biodegradable and were almost completely degraded within 25 days under simulated environmental conditions. Overall, these promising results show the potential of FK-FA films for replacing plastic packaging materials as eco-friendly edible films with prolonged shelf life for active packaging.

Development of mussel-inspired chitosan-derived edible coating for fruit preservation

Fruit rotting at the postharvest stage severely limits their marketing supply chains and shelf-life. Thus, developing a green and cost-effective approach to extend the shelf-life of perishable foods is highly desired. In this study, inspired by the mussel-adhesion strategy, a multifunctional fruit coating material has been developed using a quaternized catechol-functionalized chitosan (CQ-CS) grafted with 2, 3-epoxypropyl trimethyl ammonium chloride and 3, 4-dihydroxy benzaldehyde. The as-prepared CQ-CS coating exhibited excellent mechanical properties, universal surface adhesion abilities, antimicrobial and antioxidant capacities without any potential toxicity effects. Using strawberry and banana as model fruits, we showed that the CQ-CS coating could effectively maintain the fruit's firmness and color, decrease the weight loss rate, and prevent microbial growth, thus finally extending their shelf- life when compared to uncoated samples, indicating the universal application of the as-prepared CQ-CS coating. These findings demonstrated that this novel conformal coating of CQ-CS has great potential for fruit preservation in the food industry.

Carboxymethyl chitosan/sodium alginate hydrogel films with good biocompatibility and reproducibility by in situ ultra-fast crosslinking for efficient preservation of strawberry

Strawberry is a seasonal and regional fruit. Thus, strawberry waste caused by spoilage and decay is an urgent problem that must be solved. Developing hydrogel films (HGF) for multifunctional food packaging can effectively slow down strawberry. Based on the carboxymethyl chitosan/sodium alginate/citric acid with excellent biocompatibility, preservation effect, and ultrafast (10 s) coating on the strawberry surface, HGF specimens were designed and prepared through the electrostatic interaction of opposite charges between polysaccharides. The prepared HGF specimen exhibited excellent low moisture permeability and antibacterial properties. Its lethality rates against both Escherichia coli and Staphylococcus aureus were more than >99 %. The HGF could keep strawberries fresh for up to 8, 19, and 48 days at 25.0, 5.0, and 0 °C, respectively, by delaying the fruits' ripening, dehydration, microbial invasion, and respiration rate. The HGF dissolved and regenerated five times still exhibited good performance. The water vapor transmission rate of the regenerative HGF could reach 98 % of that of the original HGF. The regenerative HGF could maintain the freshness of strawberries for up to 8 days at 25.0 °C. This study provides new insight into an alternative film design for convenient, green, and renewable alternative films to delay perishable fruit spoilage.

Lignin-induced sacrificial conjoined-network enabled strong and tough chitosan membrane for food preservation

As a natural green polymer, chitosan is a promising material for plastic replacement. However, the mutually exclusive strength and toughness severely limit its commercial application, and the improved strength of chitosan-based materials is typically achieved at the expense of elongation or toughness. Herein, inspired by the existed multiple non-covalent interactions in biosynthesized fibers, we successfully fabricated a high-performance lignin/chitosan composite film by constructing sacrificial conjoined-network (hydrogen bonds, electrostatic interaction, etc.), which results in an impressive enhancement in tensile strength (50.2 MPa), elongation (73.6 %), and toughness (2.7 MJ/m³) simultaneously, much superior to the pure chitosan film. In addition, the composite film also demonstrates excellent UV resistance, thermal stability, low oxygen permeability (3.9 cm³/(m²·24h‧0.1 MPa)) and food preservation (with no negligible change for grape, apple, and cherry tomato after 5-10 days). Such developed lignin/chitosan with both components from biomass represents a promising alternative for plastic replacement.

Cross-linked biopolymeric films by citric acid for food packaging and preservation

There is a growing interest in the development of degradable and biopolymeric food packaging films (BFPFs) based on green ingredients and strategies due to their biocompatibility, sustainability, and renewable nature of bio-materials. The performance of BFPFs can be improved either by modifying the biopolymer molecules or by combining them with various additives, including nanomaterials, cross-linkers, bioactive compounds and other polymers. Among them, green cross-linking technology is considered as an effective method to improve the performance of BFPFs; citric acid (CA) is widely used as a natural green cross-linker in different BFPFs. In this study, after an overview on CA chemistry, different types of BFPFs cross-linked by CA have been discussed. In addition, this work summarizes the application of CA cross-linked BFPFs/coatings for food preservation in recent years. The role of CA as a cross-linking agent differs in various types of biopolymers, i.e. polysaccharide-based, protein-based and biopolyester-based biopolymers. Moreover, the cross-linking of CA with different biopolymer molecules is mainly related to the CA content and reaction state; the cross-linking process is significantly influenced by conditions such as temperature and pH. In conclusion, this work shows that CA as a natural green cross-linking agent could improve the performance of different BFPFs and enhance their food preservation capacity.

A sub-freshness monitoring chitosan/starch-based colorimetric film for improving color recognition accuracy via controlling the pH value of the film-forming solution

The demand for intelligent packaging in food sub-freshness monitoring is increasing. Herein, a pH and NH3 responsing colorimetric film (PS-CH-LCA) was fabricated based on potato starch (PS), chitosan (CH) and Lonicera caerulea L. anthocyanins (LCA) via controlling the pH value of the film-forming solution, and was applied to the real-time monitoring of shrimp freshness. The PS-CH-LCA pH 2.5 film exhibited the highest tensile strength (6.43 MPa), the lowest water solubility (33.11%) and the most sensitive color responsiveness. Morphological and structural results revealed that CH was attached to the surface of PS via hydrogen bond, and anthocyanins were well immobilized in the film-forming matrix. The sensitive color change and its high correlation with spoilage indices demonstrated the PS-CH-LCA pH 2.5 film well indicated fresh, sub-fresh, spoiled level of shrimp. The results solved the limitation of chitosan-based packaging films in undistinguishable colorimetric endpoints, providing a new strategy for indicating the sub-freshness of food packaging.

Preparation, physicochemical and application evaluation of raspberry anthocyanin and curcumin based on chitosan/starch/gelatin film

Raspberry anthocyanin (RA) from Rubus idaeus L. (Rosaceae) and curcumin (Cur) from Curcuma longa L. (Zingiberaceae) can effectively improve the physicochemical properties of composite films, and as bioactive pigment components, they can impart pH-responsive properties to the film. In this study, RA and Cur were added to chitosan/starch/gelatin composite film (CSG) to prepare CSG-RA, CSG-Cur, CSG-RA/Cur₈₂ and CSG-RA/Cur₇₃ color films by solution casting method. The color films could change color under different pH conditions and had higher antioxidant activities using ABTS (2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid)) assay. The results from fourier transform infrared spectroscopy and scanning electron microscopy showed that RA and Cur were well dispersed in the CSG matrix and improved the structure of the composite films. The hydrophobic Cur increased the tensile strength from 6 Mpa (CSG) to 14 Mpa (CSG-Cur), but reduced the elongation at break from 55 % (CSG) to 40 % (CSG-Cur). These color films had a good fresh-keeping effect and freshness monitoring, in particular, CSG-RA/Cur₇₃, had the better opacity, water solubility, thickness, moisture content and water vapor permeability than the other films. Briefly, binary pigment films had the potential to become a pH-sensitive indicator/packing film.

Levan-chitosan blend films: Preparation, structural, physical properties and application in pork packaging

Conventional fossil fuel-based packaging materials often brings of food safety and serious environmental pollution. It is significant to develop an environmentally-friendly packaging material. In this work, a levan-chitosan (LE/CS) blend film was fabricated via the solution casting method. The films were evaluated by Fourier transform infrared spectroscopy and X-ray diffraction, indicating the formation of hydrogen bonds between chitosan and levan. The mechanical properties of LE/CS films demonstrated a mechanical strength higher than CS films, and the best tensile strength appeared at a ratio of LE/CS (1:1) up to 18.78 ± 0.73 MPa. The addition of levan caused a significant increase in absorption of UV light with a reduction in swelling water of the blend films from 29.13 ± 0.53 % of chitosan film to 2.07 ± 0.27 % of LE/CS (1:1) film. A higher contact angle and lower WVP were observed for LE/CS blend films. LE/CS blend films were then used as packaging material for fresh pork and were well maintained the qualities. The study suggested that the new blend film might have a good prospect as a food packaging material.