Flexible 2D nanocellulose-based SERS substrate for pesticide residue detection

A stable and flexible Au@Ag NPs/PVA SERS platform for thiram residue detection on rough surface

Flexible and transparent surface-enhanced Raman scattering (SERS) substrates have gained great attention in analysis field as they offer a fast, non-destructive, and highly sensitive platform for in-situ detection. In this work, we present a facile one-pot strategy for synthesizing gold-cored silver shell nanoparticles (Au@Ag NPs) in the polyvinyl alcohol (PVA) colloid. With no other reducing agents, PVA can serve as both reducing and stabilizing agents for forming Au@Ag NPs. Besides, PVA acts as a scaffold to maintain SERS "hot-spots" by preventing nanoparticle aggregation. By using this flexible Au@Ag NPs/PVA colloid, the analytes can be extracted from rough surfaces for SERS measurements with excellent sensitivity, repeatability and stability. The SERS activity of the Au@Ag NPs/PVA remained at 89.8% even after 120 days of storage at room temperature in sealed air atmosphere. The selective detection of thiram residues on the surface of fruits and vegetables was successfully achieved. The limits of detection for thiram residues on apple and tomato surfaces were measured to be 0.58 and 0.56 ng cm-2, respectively, with recovery rate ranging from 91% to 107%. This work demonstrates the immense application potential of SERS colloid platform in the fields of food safety and environmental analysis.

A film-like SERS aptasensor for sensitive detection of patulin based on GO@Au nanosheets

Patulin (PAT) commonly contaminates fruits, posing a significant risk to human health. Therefore, a highly effective and sensitive approach in identifying PAT is warranted. Herein, a SERS aptasensor was constructed based on a two-dimensional film-like structure. GO@Au nanosheets modified with SH-cDNA were employed as capture probes, while core-shell Au@Ag nanoparticles modified with 4-MBA and SH-Apt were utilized as signal probes. Through the interaction between capture probes and signal probes, adjustable hotspots were formed, yielding a significant Raman signal. During sensing, the GO@Au-cDNA competitively attached to Au@AgNPs@MBA-Apt, resulting in an inverse relationship between PAT levels and SERS intensity. The acquired results exhibited linear responses to PAT within the range of 1-70 ng/mL, with a calculated limit of detection of 0.46 ng/mL. In addition, the SERS aptasensor exhibited satisfactory recoveries in apple samples, which aligned closely with HPLC. With high sensitivity and specificity, this method holds significant potential for PAT detection.

Ag-coated tetrapod gold nanostars (Au@AgNSs) for acetamiprid determination in tea using SERS combined with microfluidics

Acetamiprid is an organic and highly toxic compound. Despite being widely used as a pesticide agent on a large scale, acetamiprid poses numerous health risks to living organisms, particularly humans. Herein, a strategy for the detection of acetamiprid in tea employing surface-enhanced Raman scattering (SERS) technology incorporated with a microfluidic chip was developed. Significantly, a seed-mediated growth approach was utilized to engineer Ag-coated tetrapod gold nanostars (core-shell Au@AgNSs) with four sharp tips. The synthesized Au@AgNSs showed an enhancement factor of 7.2 × 106. Solid works was used to figure out the two-channel microfluidic chip featuring four circular split hybrid structures, and COMSOL (Software for Multiphysics Simulation) was utilized to model the fusion effect between the substrate (Au@AgNSs) and the sample (acetamiprid). For the first time, the core-shell Au@AgNSs and acetamiprid were fused in the microfluidic channel to facilitate the detection of acetamiprid using SERS. The outcomes pointed out that the standard curve correlation coefficient between SERS intensity (876 cm-1) and the concentration of acetamiprid in tea specimens was calculated as 0.991, while the limit of detection (LOD) was 0.048 ng mL-1, which is well below the minimum limit set by the European Union (10 ng mL-1). Thus, the developed technique combining SERS and microfluidics demonstrated high potential for the rapid and efficient detection of acetamiprid in tea.

Nanocellulose: Structure, modification, biodegradation and applications in agriculture as slow/controlled release fertilizer, superabsorbent, and crop protection: A review

This review investigates the potential of nanocellulose in agriculture, encompassing its structure, synthesis, modification, and applications. Our investigation of the characteristics of nanocellulose includes a comprehensive classification of its structure. Various mechanical, chemical and enzymatic synthesis techniques are evaluated, each offering distinct possibilities. The central role of surface functionalization is thoroughly examined. In particular, we are evaluating the conventional production of nanocellulose, thus contributing to the novelty. This review is a pioneering effort to comprehensively explore the use of nanocellulose in slow and controlled release fertilizers, revolutionizing nutrient management and improving crop productivity with reduced environmental impact. Additionally, our work uniquely integrates diverse applications of nanocellulose in agriculture, ranging from slow-release fertilizers, superabsorbent cellulose hydrogels for drought stress mitigation, and long-lasting crop protection via nanocellulose-based seed coatings. The study ends by identifying challenges and unexplored opportunities in the use of nanocellulose in agriculture. This review makes an innovative contribution by being the first comprehensive study to examine the multiple applications of nanocellulose in agriculture, including slow-release and controlled-release fertilizers.

A SERS aptasensor based on a flexible substrate for interference-free detection of carbendazim in apple

Non-destructive and interference-free monitoring of pesticide residue on the surface of fruits is still a challenge. Herein, a SERS aptasensor based on a flexible substrate was established for effective carbendazim (CBZ) detection on apple peel. In this sensor, electrospun PVDF/CQDs film served as a flexible supporting substrate. AuNS@Ag was liquid-liquid self-assembled on the PVDF/CQDs film to form a uniform and highly active SERS substrate. During the detection process, aptamers specifically capture the CBZ molecules, while nitrile-mediated Raman tag (MMBN) linked to AuNPs provided optical anti-interference signals. The results showed that the developed sensor had high sensitivity, selectivity, reproducibility, and stability for CBZ detection. Importantly, the flexibility of the SERS substrate helped the sensor realize non-invasive CBZ detection at a concentration as low as 1.20 ng/cm2 on apple peel, which is much lower than the maximum residue limits of CBZ in apples.

Paper-based substrates for surface-enhanced Raman spectroscopy sensing

Surface-enhanced Raman scattering (SERS) has been recognized as one of the most sensitive analytical methods by adsorbing the target of interest onto a plasmonic surface. Growing attention has been directed towards the fabrication of various substrates to broaden SERS applications. Among these, flexible SERS substrates, particularly paper-based ones, have gained popularity due to their easy-to-use features by full contact with the sample surface. Herein, we reviewed the latest advancements in flexible SERS substrates, with a focus on paper-based substrates. Firstly, it begins by introducing various methods for preparing paper-based substrates and highlights their advantages through several illustrative examples. Subsequently, we demonstrated the booming applications of these paper-based SERS substrates in abiotic and biological matrix detection, with particular emphasis on their potential application in clinical diagnosis. Finally, the prospects and challenges of paper-based SERS substrates in broader applications are discussed.

High-performance homogeneous carboxymethylcellulose-stabilized Au@Ag NRs-CMC surface-enhanced Raman scattering chip for thiram detection in fruits

Cellulose material holds considerable promise for effective surface-enhanced Raman scattering (SERS) substrate construction due to its extensive availability, chemically modifying capacity, ease of manufacture, high flexibility and low optical activity. A large-area, high-sensitivity, stable and uniform Au@Ag nanorods (NRs)-CMC substrate was successfully developed via electrostatic repulsion by using negatively-charged core-shell Au@Ag NRs as SERS active plasmonic nanomaterial, combined with negatively-charged carboxymethylcellulose (CMC) hydrogel for nanoparticles stabilization, homodisperse and protection. The obtained Au@Ag NRs-CMC substrate showed excellent sensitivity for the detection of thiram residues in fruits containing low and abundant pigment interferents, such as apples and blueberries, with detection limits of 58 and 78 ppb, respectively. Additionally, it retained more than 80% SERS performance after storage for 9 months under ambient conditions, demonstrating its great potential in facilitating the commercialization of cellulose-based SERS technology for cost-effective detection of food contaminants with advantages of facile preparation procedure, uniformity, reproducibility and long-term stability.

Two-Dimensional Printed AgNPs@Paper Swab for SERS Screening of Pesticide Residues on Apples and Pears

In recent years, growing food safety and quality concerns have emerged and created an urgent need for the development of rapid and reliable food control technologies. This study proposes a novel surface-enhanced Raman spectroscopy (SERS) substrate printing technology that utilizes commercial filter paper functionalized by silver nanoparticles. We modified the Automatic TLC Sampler using a two-dimensional (2D) printer. The modification allows for various sampling modes which can be applied to 2D printing. The shape and size of nano silver on the substrate were determined, and the substrate sensitivity, uniformity, and stability were evaluated. As demonstrated by the experimental outcomes, the proposed technology is highly sensitive and reproducible, that is, the limit of quantitation was 10^-5 mg/kg, and the spot-to-spot and block-to-block Raman intensity variations were below 4.2%. We also successfully applied the technology to pears and apples for thiram recognition, yielding outstanding detectability down to 2.5 × 10^-6 and 3.9 × 10^-7 mg/mL (equal to 2.5 × 10^-3 and 3.9 × 10^-4 mg/kg), respectively. These were well below the maximum residue limit (7 mg/kg). More importantly, the linear relationships between thiram levels and the SERS intensity allow for sensitive monitoring of minute variations in agricultural insecticide residues. This proposed detection method can realize in situ detection with a strong signal fingerprint.

An adhesive SERS substrate based on a stretched silver nanowire-tape for the in situ multicomponent analysis of pesticide residues

Two essential factors in powerful surface-enhanced Raman spectroscopy analysis of trace pesticide residues are viz., high sensitivity and efficient sampling. Herein, owing to elastic properties, a stretched Ag nanowire (Ag NW)-tape under the strain of 15% formed a wrinkled structure with periodic microridges and microgrooves, where abundant nanogaps were generated by the aggregated Ag NWs. Compared with the unstretched Ag NW-tape substrate, an appreciable signal enhancement of the modified 4-mercaptobenzoic acid (4-MBA) molecules with a ratio of 2.6 was discerned from the sophisticated SERS substrate due to the electromagnetic enhancement induced by the relatively high density of "hot spots" around the Ag NW aggregates. The as-fabricated Ag NW-tape substrate performed admirably in detecting 4-MBA and demonstrated an enhancement factor of 1.16 × 10⁶. Moreover, for the in situ detection of tetramethylthiuram disulfide, thiabendazole, and their mixture, the relatively high recovery rates of over 88% were favorably realized by the Ag NW-tape substrate with superior sensitivity, distinct flexibility, and adhesiveness. This fascinating SERS substrate, dependent on the flexible and adhesive Ag NW-tape, is promising for application in SERS analysis of trace residues on various practical surfaces.

Flexible Au@AgNRs/CMC/qPCR film with enhanced sensitivity, homogeneity and stability for in-situ extraction and SERS detection of thiabendazole on fruits

In this study, a high-performance, stable and homogeneous Au@AgNRs/CMC/qPCR flexible film surface-enhanced Raman scattering (SERS) substrate was constructed by synergistically stabilizing and protecting bimetallic core-shell Au@Ag nanorods (Au@AgNRs) with carboxymethylcellulose (CMC) and fluorescent-quantitative-polymerase-chain-reaction (qPCR) film. The network structure of CMC immobilized and aligned Au@AgNRs through coordination of carboxyl groups with surface Ag atoms to provide intensive and stable 'hot spots', and the qPCR bilayer film performed as carrier and barrier to protect Au@AgNRs from oxidation, humidity and optical damage and improved the robustness and stability. The Au@AgNRs/CMC/qPCR film was used for in-situ extraction and SERS detection of thiabendazole on nectarine (0.24 ppm) and lemon (0.27 ppm) with low detection of limits. Furthermore, it retained 98.6% SERS performance after storage for 90 days under ambient conditions, revealing the great potential in promoting the commercialization of the SERS technique for sensitive contaminants sensing with simple fabrication procedures, homogeneity, reproducibility and long-term stability.

Flexible Substrate of Cellulose Fiber/Structured Plasmonic Silver Nanoparticles Applied for Label-Free SERS Detection of Malathion

Surface-enhanced Raman scattering (SERS) is considered an efficient technique providing high sensitivity and fingerprint specificity for the detection of pesticide residues. Recent developments in SERS-based detection aim to create flexible plasmonic substrates that meet the requirements for non-destructive analysis of contaminants on curved surfaces by simply wrapping or wiping. Herein, we reported a flexible SERS substrate based on cellulose fiber (CF) modified with silver nanostructures (AgNS). A silver film was fabricated on the membrane surface with an in situ silver mirror reaction leading to the formation of a AgNS-CF substrate. Then, the substrate was decorated through in situ synthesis of raspberry-like silver nanostructures (rAgNS). The SERS performance of the prepared substrate was tested using 4-mercaptobenzoic acid (4-MBA) as a Raman probe and compared with that of the CF-based plasmonic substrates. The sensitivity of the rAgNS/AgNS-CF substrate was evaluated by determining the detection limit of 4-MBA and an analytical enhancement factor, which were 10 nM and ~10⁷, respectively. Further, the proposed flexible rAgNS/AgNS-CF substrate was applied for SERS detection of malathion. The detection limit for malathion reached 0.15 mg/L, which meets the requirements about its maximum residue level in food. Thus, the characteristics of the rAgNS/AgNS-CF substrate demonstrate the potential of its application as a label-free and ready-to-use sensing platform for the SERS detection of trace hazardous substances.

Rapid determination of thiram and atrazine pesticide residues in fruit and aqueous system based on surface-enhanced Raman scattering

In this work, a rapid and sensitive strategy was developed to determine thiram (THI) and atrazine (ATZ) by surface-enhanced Raman scattering (SERS) technology. β-cyclodextrin modified silver nanoparticles (β-CD-AgNPs) were synthesized using β-CD as a reducing agent and encapsulating agent under alkaline conditions and employed as SERS substrate. The existence of β-CD can capture the molecules to form host-guest complex and fix molecular orientation in its cavity, thus ensuring the enhanced SERS signal intensity of THI and ATZ. The linear response extends from 2.56 × 10^-8 to 2.56 × 10^-3 mol/L for THI and 3.08 × 10^-8 to 3.08 × 10^-3 mol/L for ATZ, with the limits of detection (LOD) of 2.42 × 10^-9 mol/L for THI and 7.26 × 10^-9 mol/L for ATZ, respectively. The application of the proposed method in real samples including apple and water were investigated, and the results would help promote the application of SERS technology as a powerful analytical tool for detecting other pesticide residues. It is expected that this SERS strategy will provide great value for rapid detecting pesticide residues in food products and environmental systems.

Preparation of SERS active filter paper for filtration and detection of pesticides residue from complex sample

The selectivity is needed mostly in SERS sensing because analytes of interest are commonly present in a complex mixture containing particles and impurities, which hinder the interactions between the laser and analyte being detected. In this manuscript, we describe our efforts developing a simple and instant. method to prepare a filter paper SERS sensor. Colloidal Ag nanoparticles were immobilized on one side of filter paper via an in-situ growth method. The fabrication process of the sensor could be finished in several minutes, and no special facility needed. The filter paper SERS sensor demonstrated a spectra uniformity with a 7.0 % point-by-point signal deviation. And the filter function of the sensor could effectively filter out interferences from samples in 1 min, that allowing the direct detection of thiram in ketchup by SERS with detection limit of 93 ppb. Furthermore, we used a Quick Easy Cheap Effective Rugged and Safe (QuEChERS) sample preparation method to detect malachite green (MG) in soil with a sensitivity as low as 0.01 ppm without any sample pre-treatment or purification. A SERS filter paper may open a new avenue for rapid testing of food quality during manufacturing as well as fast detection of potential contaminants in a myriad of substrates.

The Frontiers of Functionalized Nanocellulose-Based Composites and Their Application as Chemical Sensors

Chemical sensors are a rapidly developing technology that has received much attention in diverse industries such as military, medicine, environmental surveillance, automotive power and mobility, food manufacturing, infrastructure construction, product packaging and many more. The mass production of low-cost devices and components for use as chemical sensors is a major driving force for improvements in each of these industries. Recently, studies have found that using renewable and eco-friendly materials would be advantageous for both manufacturers and consumers. Thus, nanotechnology has led to the investigation of nanocellulose, an emerging and desirable bio-material for use as a chemical sensor. The inherent properties of nanocellulose, its high tensile strength, large specific surface area and good porous structure have many advantages in its use as a composite material for chemical sensors, intended to decrease response time by minimizing barriers to mass transport between an analyte and the immobilized indicator in the sensor. Besides which, the piezoelectric effect from aligned fibers in nanocellulose composites is beneficial for application in chemical sensors. Therefore, this review presents a discussion on recent progress and achievements made in the area of nanocellulose composites for chemical sensing applications. Important aspects regarding the preparation of nanocellulose composites using different functionalization with other compounds are also critically discussed in this review.

In Situ Collection and Rapid Detection of Pathogenic Bacteria Using a Flexible SERS Platform Combined with a Portable Raman Spectrometer

This study aims to develop a simple, sensitive, low-cost, environmentally friendly and flexible surface-enhanced Raman scattering (SERS) platform, combined with a portable Raman spectrometer, for the rapid and on-site SERS detection of bacteria. Commercial tobacco packaging paper (TPP) with little background interference was used as a loading medium that effectively adsorbed Au nanoparticles and provided sufficient “hot spots”. This Au-tobacco packaging paper (Au-TPP) substrate used as a flexible SERS platform can maximize sample collection by wiping irregular surfaces, and was successfully applied to the on-site and rapid detection of pathogenic bacteria. Raman fingerprints of pathogenic bacteria can be obtained by SERS detection of spiked pork using wipeable Au-TPP, which verifies its value in practical applications. The results collected by SERS were further verified by polymerase chain reaction (PCR) results. It showed several advantages in on-site SERS detection, including accurate discrimination, simple preparation, easy operation, good sensitivity, accuracy and reproducibility. This study indicates that the established flexible SERS platform has good practical applications in pathogenic bacterial identification and other rapid detections.

Surface Enhanced Raman Spectroscopy: Applications in Agriculture and Food Safety

Recent global warming has resulted in shifting of weather patterns and led to intensification of natural disasters and upsurges in pests and diseases. As a result, global food systems are under pressure and need adjustments to meet the change—often by pesticides. Unfortunately, such agrochemicals are harmful for humans and the environment, and consequently need to be monitored. Traditional detection methods currently used are time consuming in terms of sample preparation, are high cost, and devices are typically not portable. Recently, Surface Enhanced Raman Scattering (SERS) has emerged as an attractive candidate for rapid, high sensitivity and high selectivity detection of contaminants relevant to the food industry and environmental monitoring. In this review, the principles of SERS as well as recent SERS substrate fabrication methods are first discussed. Following this, their development and applications for agrifood safety is reviewed, with focus on detection of dye molecules, melamine in food products, and the detection of different classes of pesticides such as organophosphate and neonicotinoids.