Novel, recyclable Brønsted acidic deep eutectic solvent for mild fractionation of hemicelluloses

A cascaded process to upgrade bleached bamboo pulp into dissolving pulp and arabinoxylan

The dissolving pulp preparation from bleached kraft pulp while realizing the high-value application of hemicellulose fraction is of great significance for improving the overall economics of the process. This work proposed a two-step cascaded process of deep eutectic solvent (DES) pretreatment combined with mechanical refining for the co-production of dissolving pulp and arabinoxylan (AX) from bleached bamboo pulp. Results showed that using alkaline DES composed of quaternary ammonium hydroxide and urea prepared high-quality dissolving pulp (α-cellulose content of 97.7 %) while selectively extracting high-quality AX. The mechanical refining rapidly opened up the cellulose structure to increase its Fock reactivity to over 70.0 %. When 100 g bleached bamboo pulp was subjected to this technology route, the high yields of dissolving pulp (63.8 g) and AX (13.0 g) were respectively obtained. It was proposed that the tailored DES with different alkalinity could specifically produce dissolving pulp or AX which were more favorable for downstream application through distinct action pathways. The swelling effects of DES on the cellulose surface facilitated the subsequent mechanical fibrillation, allowing a synergistic enhancement of the reactivity. Thus, the integrated process provided a sustainable alternative for dissolving pulp upgrading while adding attractiveness by co-producing AX product stream.

Enhancing enzymatic conversion of castor stalk through dual-functional ethanolamine pretreatment

Castor stalk from hemp plants is an attractive lignocellulosic feedstock for biomass refining valorization due to its similar chemical composition to hardwoods. In this study, the castor stalk fibers were pretreated with efficient dual-functional ethanolamine to achieve delignification and swelling of the cellulosic fibers, followed by cellulase enzymatic digestion for biomass conversion. Experimental results showed that ethanolamine pretreatment at 160 °C for 1 h effectively removed 69.20 % of lignin and 43.18 % of hemicellulose. In addition to efficient delignification and removal of hemicellulose, the study also revealed that supramolecular structure of cellulose was another major factor affecting enzymatic hydrolysis performance. The lowered crystallinity (60-70 %) and swelled crystal sizes (2.95-3.04 nm) promoted enzymatic hydrolysis efficiency during the heterogeneous reaction process. Under optimal conditions (160 °C, 1 h; enzyme loading: 15 FPU/g substrate), promoted yields of 100 % glucose and over 90 % xylose were achieved, which were significantly higher than those obtained from untreated castor stalk. These findings highlighted the effectiveness of the dual-functional ethanolamine pretreatment strategy for efficient bioconversion of lignocellulosic feedstocks. Overall, this study provides valuable insights into the development of new strategies for the efficient utilization of biomass resources, which is essential for the sustainable development of our society.

Renewable hemicellulose-based materials for value-added applications

The importance of renewable resources and environmentally friendly materials has grown globally in recent time. Hemicellulose is renewable lignocellulosic materials that have been the subject of substantial valorisation research. Due to its distinctive benefits, including its wide availability, low cost, renewability, biodegradability, simplicity of chemical modification, etc., it has attracted increasing interest in a number of value-added fields. In this review, a systematic summarizes of the structure, extraction method, and characterization technique for hemicellulose-based materials was carried out. Also, their most current developments in a variety of value-added adsorbents, biomedical, energy-related, 3D-printed materials, sensors, food packaging applications were discussed. Additionally, the most recent challenges and prospects of hemicellulose-based materials are emphasized and examined in-depth. It is anticipated that in the near future, persistent scientific efforts will enable the renewable hemicellulose-based products to achieve practical applications.

Enhancing the dispersibility of Gelidium amansii-derived microfibrillated cellulose through centrifugal fractionation

Hydrothermal pretreatment is useful for microfibrillated cellulose (MFC) preparation due to its safety, but the remaining hemicellulose might affect MFC properties. This study aimed to investigate the effect of centrifugation time on hemicellulose removal and the physicochemical properties of MFC obtained after hydrothermal pretreatment and micro-fibrillation. In this study, centrifugation was applied to the MFC suspension at varying duration times. Composition analysis and Fourier transform infrared spectra indicated that fractionated MFC has no hemicellulose content after 10, 20, and 30 min centrifugation. It also showed an approximately 5 times higher than 0.5 % g/g of initial solid concentration, indicated by a lower gel concentration point, than unfractionated MFC. Scanning electron microscope images of the fractionated MFC for 30 min (MFC2C) presented thin, long cellulose fibrils of 517 nm in average diameter and 635-10,000 nm in length that induced a slower sedimentation rate. MFC2C dispersion was also improved by autoclave sterilization by regulating cellulose structure, rheology, and crystallinity. As a result, MFC dispersibility can be enhanced by removing hemicellulose through simple centrifugation.

Efficient separation and production of high-quality rubber, lignin nanoparticles and fermentable sugars from Eucommia ulmoides pericarp via deep eutectic solvent pretreatment

The natural barriers of lignocellulose hinder the separation of Eucommia ulmoides rubber (EUR) from Eucommia ulmoides pericarp (EUP), whereas traditional separation methods normally lead to the waste of Eucommia ulmoides lignocellulose resource and environmental pollution. In this study, an acidic deep eutectic solvent composed of lactic acid and ZnCl2 was developed as a pretreatment medium to reduce the separation barriers of EUR while producing lignin nanoparticles and fermentable sugars. Results showed that DES pretreatment could accelerate the extraction efficiency (91.0 %) and purity (>99 %) of EUR and maintain its chemical structure compared to the traditional alkaline and mechanical methods. Meanwhile, the regenerated nano-lignin showed excellent antioxidant activity (IC50 = 46.3 μg/mL) comparable to commercial antioxidant BHA. Besides, the enzymatic hydrolysis efficiency of EUP with DES pretreatment was significantly enhanced about 9 times than the control groups. Overall, the acidic DES pretreatment could be considered a promising pretreatment method for separation of high-quality EUR and valorization of lignocellulosic components.

Effect of deep eutectic solvent pretreatment on biohydrogen production from corncob: pretreatment temperature and duration

Deep eutectic solvent pretreatment with different temperatures and durations was applied to corncob to increase hydrogen yield via photo-fermentation. The correlation of composition, enzymatic hydrolysis, and hydrogen production in pretreated corncobs, as well as energy conversion was evaluated. Deep eutectic solvent pretreatment effectively dissolved lignin, retained cellulose, and enhanced both enzymatic hydrolysis and hydrogen production. The maximum cumulative hydrogen yield obtained under a pretreatment condition of 50°C and 12 h was 677.45 mL; this was 2.72 times higher than that of untreated corncob, and the corresponding lignin removal and enzymatic reduction of sugar concentration were 79.15% and 49.83 g/L, respectively; the highest energy conversion efficiency was 12.08%. The hydrogen production delay period was shortened, and the maximum shortening time was 18.9 h. Moreover, the cellulose content in pretreated corncob was positively correlated with both reducing sugar concentration and hydrogen yield and had the strongest influence on hydrogen production.

Dietary Fiber from Navel Orange Peel Prepared by Enzymatic and Ultrasound-Assisted Deep Eutectic Solvents: Physicochemical and Prebiotic Properties

Dietary fiber (DF) was extracted from navel orange peel residue by enzyme (E-DF) and ultrasound-assisted deep eutectic solvent (US-DES-DF), and its physicochemical and prebiotic properties were characterized. Based on Fourier-transform infrared spectroscopy, all DF samples exhibited typical polysaccharide absorption spectra, indicating that DES could separate lignin while leaving the chemical structure of DF unchanged, yielding significantly higher extraction yields (76.69 ± 1.68%) compared to enzymatic methods (67.27 ± 0.13%). Moreover, ultrasound-assisted DES extraction improved the properties of navel orange DFs by significantly increasing the contents of soluble dietary fiber and total dietary fiber (3.29 ± 1.33% and 10.13 ± 0.78%, respectively), as well as a notable improvement in the values of water-holding capacity, oil-holding capacity, and water swelling capacity. US-DES-DF outperformed commercial citrus fiber in stimulating the proliferation of probiotic Bifidobacteria strains in vitro. Overall, ultrasound-assisted DES extraction exhibited potential as an industrial extraction method, and US-DES-DF could serve as a valuable functional food ingredient. These results provide a new perspective on the prebiotic properties of dietary fibers and the preparation process of prebiotics.

Rapid and massive fractionation of hemicelluloses for purifying cellulose at room temperature by tetramethylammonium hydroxide

The fractionation of hemicelluloses is a promising method to improve the comprehensive utilization of lignocellulosic biomass. However, the effective fractionation of hemicelluloses is always limited by the structural complexity and easy degradability. In this study, tetramethylammonium hydroxide (TMAH) was developed to fractionate hemicelluloses from poplar holocellulose with high molecular weights and high yields at room temperature. Approximately 90% of hemicelluloses could be dissolved at room temperature in 1 h, and the yield was up to 81.9%. Compared with the fractionation using NaOH solution, the hemicelluloses isolated by TMAH solvent showed a more complete structure and higher purity. Meanwhile, the retention rate of cellulose after treatment with TMAH was up to 90.2%, and the crystal structure of cellulose in the residues was practically unchanged. Moreover, the TMAH solvent could be recycled to fractionate hemicelluloses. The work provides an elegant and significantly efficient method towards hemicelluloses fractionation and cellulose purification.

Microwave-assisted choline chloride/1,2-propanediol/methyl isobutyl ketone biphasic system for one-pot fractionation and valorization of Eucalyptus biomass

The developing of pretreatment method to break the biomass barrier of lignocellulosic is a challenging task for achieve high value utilization. A fast microwave-assisted choline chloride/1,2-propanediol/methyl isobutyl ketone biphasic system was constructed for pretreating Eucalyptus to the production of furfural and cellulose-rich residues and the extraction of lignin. Results showed that the combination of AlCl₃·6H₂O and HCl had the best catalytic ability for furfural production among the examined catalysts. Under the optimal conditions (140 °C, 15 min, 0.075 M AlCl₃·6H₂O, 0.05 M HCl), the furfural yield of 55.4 %, the glucose yield of 90.3 % and the delignification rate of 92.4 % could be achieved. Moreover, the extracted lignin samples with a low polydispersity (1.55-1.73) and molecular weight (1380-2040 g/mol) are promising to act as precursor for the value-add products processing. These findings demonstrated an ultrafast pretreatment process with excellent results in biomass fractionation and comprehensive utilization of biomass components.

Deep eutectic solvents for improved biomass pretreatment: Current status and future prospective towards sustainable processes

Pretreatment processes - recognized as critical steps for efficient biomass refining - have received much attention over the last two decades. In this context, deep eutectic solvents (DES) have emerged as a novel alternative to conventional solvents representing a step forward in achieving more sustainable processes with both environmental and economic benefits. This paper presents an updated review of the state-of-the-art of DES-based applications in biorefinery schemes. Besides describing the fundamentals of DES composition, synthesis, and recycling, this study presents a comprehensive review of existing techno-economic and life cycle assessment studies. Challenges, barriers, and perspectives for the scale-up of DES-based processes are also discussed.

Mild pretreatment with Brønsted acidic deep eutectic solvents for fractionating β-O-4 linkage-rich lignin with high sunscreen performance and evaluation of enzymatic saccharification synergism

Herein, a mild fractionation method by employing polyol-based Brønsted acidic DESs (BDESs) was proposed to extract lignin with well-preserved β-O-4 substructures and to enhance fermentable sugar yields simultaneously. For ethylene glycol-oxalic acid (EG-OA), more than 53 % of lignin was obtained and superb carbohydrate digestibility (i.e., glucose and xylose yields were reached to 94.6 % and 87.7 %, respectively) was achieved after pretreatment. Remarkably, detailed structural studies revealed that the polyol was incorporated into lignin, which stabilized reactive carbocation intermediates formed during BDESs treatment and prevented undesired recondensation reactions. This lignin protection mechanism was shown to play a key role in enzymatic hydrolysis enhancement and lignin valorization. The resultant β-O-4 linkage-rich lignin fractions were attractive for natural sunscreen applications due to their lighter color and excellent UV-blocking performance. Overall, this work proposed a sustainable and economically practical lignin-first biorefinery approach that is beneficial for achieving comprehensive valorization of lignocellulose.

Efficient fractionation of woody biomass hemicelluloses using cholinium amino acids-based deep eutectic solvents and their aqueous mixtures

Novel and green cholinium amino acids-based deep eutectic solvents (DESs) and their aqueous mixtures were synthesized and employed in deconstructing poplar for hemicellulose fractionation. The effects of water content in DESs on hemicellulose dissociation and structural features were comprehensively investigated, along with the reusability of DESs for treatment. The integration of water into DESs could facilitate hemicellulose fractionation, and the cholinium lysine: urea with 5 wt% water (CL: U-5) demonstrated the best performance with a hemicellulose yield of 59.2%. Further structure analysis revealed that hemicelluloses with various branching degrees and molecular weights were obtained with varying water content of DESs. Furthermore, the CL: U-5 had recyclability and reusability with a 40.5% hemicellulose yield obtained after reused three times. The novel and eco-friendly cholinium amino acids-based DESs treatment provides an effective and sustainable strategy for hemicellulose fractionation from woody biomass.

Review on the preparation and application of lignin-based carbon aerogels

Carbon aerogels (CAs) are excellent carrier materials with a large surface area and high porosity. In addition to the above-mentioned wonderful characteristics, aerogel with lignin as a precursor is also a material with high bioactivity and degradability. Lignin carbon aerogels (LCAs) have a wide range of applications, and can be used in supercapacitors, adsorbents and catalysts, etc., but their preparation process is more complex. In this paper, we review the preparation and influencing factors of LCAs, analyze their properties and structural characterization, and aim to provide references for the optimal preparation, effective characterization, and expansion of applications of LCAs.