Calcium alginate/curdlan/corn starch@calcium alginate macrocapsules for slowly digestible and resistant starch

Strong, anti-swelling, and biodegradable seaweed-based straws with surface mineralized CaCO3 armor

While the extensive utilization of disposable plastic straws has resulted in significant environmental issues such as microplastics and soil and ocean pollution, the quest for alternative straws for versatile use remains a formidable challenge. Here, drawing inspiration from naturally water-resistant materials such as bones and sea urchins, we have developed seaweed-based straws with significantly improved water resistance and mechanical strength via in-situ mineralization of CaCO3 on their surfaces. Specifically, the COO- groups on the G (α-L-guluronate) blocks of alginate were employed to establish a robust cross-linked network, while the COO- groups on the M (β-D-mannuronate) blocks attracted free Ca2+ through electrostatic forces, thereby promoting CaCO3 nucleation. This effectively prevents COOH groups from hydrating, reducing swelling, and results in the fabrication of nano- to micron-sized CaCO3 particles that reinforce the structure without compromising the cross-linked network. Compared with the control group, the S5% sample (prepared with 5 % Na2CO3 solution) exhibited a 102 % increase in water contact angle, a 35 % decrease in swelling degree, and a 35.5 % and 37.5 % increase in ultimate flexural and tensile stress, respectively. Furthermore, the potential use of these straws as a waste for heavy metal adsorption was investigated, addressing environmental concerns while demonstrating economic feasibility.

Impacts of transglutaminase on the processing and digestion characteristics of glutinous rice flour: Insight of the interactions between enzymic crossing-linked protein and starch

Glutinous rice is extensively consumed due to its nutritious content and wonderful flavor. However, glutinous rice flour has a high glycemic index, and the storage deterioration of sweet dumplingsissevere. Transglutaminase (TG) was used to cross-link glutinous rice protein and improve the characteristics of glutinous rice products. The findings demonstrated that TG significantly catalysed protein cross-linking to form a dense protein network, reduced the viscosity of glutinous rice paste and improved the thermal stability. The protein network may physically block the access of starch granules to digestive enzymes to lower the digestion rate of starch, and attenuate the damage of ice crystal molecules to the starch structure to improve the freezing stability of starch gels. The cracking rate and water loss of sweet dumplings prepared using glutinous rice flour with TG treated for 60 min reduced significantly. In conclusion, this study broadened the application of TG in starch products.

Core-shell structured alginate-based hydrogel beads modified by starch and protocatechuic acid: Preparation, characterization, phenolic slow release and stable antioxidant potential

A novel core-shell structured alginate-based hydrogel bead modified by co-gelatinizing with starch and protocatechuic acid (PA), was designed to modulate physical properties of beads, release behavior and antioxidant stability of encapsulated bioactives. Core was fabricated by ionotropic gelation, and its formulation (ratio of sodium alginate/starch) was determined by particle size/starch distribution, texture and bioactive encapsulation capacity of core. Then, coating core with shell-forming solution co-gelatinized with different doses of PA, and subsequently cross-linked with Ca2+ to obtain core-shell structured beads. Surface microstructure, mechanical characteristics, and swelling ratio of beads were affected by concentrations of PA. Besides, core-shell structure containing PA could enhance delivery and sustained release of encapsulated phenolic bioactives during in vitro digestion, and improve their antioxidant potential stability. Furthermore, interaction between PA and polysaccharide components was elucidated by FTIR and TGA. The present information was beneficial for the advancement of functional food materials and bioactive delivery systems.

The mechanisms in the gut microbiota regulation and type 2 diabetes therapeutic activity of resistant starches

Resistant starch (RS) can potentially prevent type 2 diabetes through the modulation of intestinal microbiota and microbial metabolites. Currently, it has been wildly noted that altering the intestinal microbial composition and short-chain fatty acids levels can achieve therapeutic effects, although the specific mechanisms were rarely elucidated. This review systematically explores the structural characteristics of different RS, analyzes the cross-feeding mechanism utilized by intestinal microbiota, and outlines the pathways and targets of butyrate, a primary microbial metabolite, for treating diabetes. Different RS types may have a unique impact on microbiota composition and their cross-feeding, thus exploring regulatory mechanisms of RS on diabetes through intestinal flora interaction and their metabolites could pave the way for more effective treatment outcomes for host health. Furthermore, by understanding the mechanisms of strain-level cross-feeding and metabolites of RS, precise dietary supplementation methods targeted at intestinal composition and metabolites can be achieved to improve T2DM.

Tailoring hydroxypropyl starch films with curdlan for enhanced properties for edible packaging

Hydroxypropyl starch-based composite system has high potential for many applications such as food packaging and biomedical fields. Here, how the incorporation of curdlan, a thermo-irreversible heating-set gel, tailors the processability, structure, and film performance of hydroxypropyl starch, a cooling-set gel, has been systematically investigated, aiming to achieve enhanced material properties favorable for edible packaging applications. Curdlan incorporation increased the shear-thinning behavior and viscosity of hydroxypropyl starch solution, which was also strongly affected by temperature. The miscibility and comparability between the two polymers with distinct gelation behaviors is a practical and interesting scientific topic. Scanning electron microscopy, dynamic mechanical analysis, and thermogravimetric analysis all indicated good compatibility between hydroxypropyl starch and curdlan. There was no observable phase boundary between the two materials, and all composite films showed only a single relaxation peak and only one polymer thermal decomposition peak. This resulted in improved structural density and overall performance. Compared with pure HPS film, the 7:3 HPS/CD film showed increases in tensile strength by 66.12 % and thermal decomposition temperature by 3 °C, and a reduction in water solubility by 11.72 %. This knowledge gained here may facilitate the development of edible films based on hydroxypropyl starch with satisfying film performance and processability.

Effect of curdlan addition and thermal sterilization on the structural and properties of rice starch gel

This study delves into the effects of curdlan integration and thermal sterilization on the rheological properties, structure, and quality attributes of concentrated rice starch gel. Acting as a heat-set polysaccharide, curdlan established a dual-network gel structure with rice starch gel, displaying strong interactions with rice starch, as confirmed by confocal laser scanning microscopy and Fourier-transform infrared spectroscopy. The addition of curdlan expedited the gel formation of rice starch, yielding a denser gel structure. Consequently, this enhanced G', solid-like behavior, textural properties, and cooking quality while reducing frequency-dependence. Given the cooling-induced gelation behavior of pure rice starch, thermal treatment disrupted inter-chain hydrogen bonding, compromising the structural integrity of the gel. This disruption manifested in a softer texture and diminished mechanical properties and cooking quality. Notably, this decline in mechanical properties and cooking quality of rice starch gel was markedly ameliorated with the incorporation of curdlan, particularly at a content of ≥1.0 %. Compared with pure RS, 1.0 % CD inclusion showed a reduction in cooking breakage rate by 30.69 % and an increase in hardness by 38.04 %. This work provides valuable insights for the advancement of fresh starch gel-based foods that exhibit exceptional quality and an extended shelf life.

The Construction of Sodium Alginate/Carboxymethyl Chitosan Microcapsules as the Physical Barrier to Reduce Corn Starch Digestion

To enhance the resistant starch (RS) content of corn starch, in this work, carboxymethyl chitosan/corn starch/sodium alginate microcapsules (CMCS/CS/SA) with varying concentrations of SA in a citric acid (CA) solution were designed. As the SA concentration increased from 0.5% to 2%, the swelling of the CMCS/CS/SA microcapsule decreased from 15.28 ± 0.21 g/g to 3.76 ± 0.66 g/g at 95 °C. Comparatively, the onset, peak, and conclusion temperatures (To, Tp, and Tc) of CMCS/CS/SA microcapsules were higher than those of unencapsulated CS, indicating that the dense network structure of microcapsules reduced the contact area between starch granules and water, thereby improving thermal stability. With increasing SA concentration, the intact and dense network of CMCS/CS/SA microcapsules remained less damaged after 120 min of digestion, suggesting that the microcapsules with a high SA concentration provided better protection to starch, thereby reducing amylase digestibility. Moreover, as the SA concentration increased from 0.5% to 2%, the RS content of the microcapsules during in vitro digestion rose from 42.37 ± 0.07% to 57.65 ± 0.45%, attributed to the blocking effect of the microcapsule shell on amylase activity. This study offers innovative insights and strategies to develop functional starch with glycemic control properties, holding significant scientific and practical value in preventing diseases associated with abnormal glucose metabolism.

On the investigation of composite cooling/heating set gel systems based on rice starch and curdlan

In pursuit of advancing the understanding of composite gel systems, this study delves into the intricate realm of rheology, structural elucidation, and mechanical attributes. Specifically, it scrutinizes the symbiotic interplay between rice starch, a cooling-set gel, and curdlan, a thermo-irreversible heating-set gel. A higher curdlan content enhances the inter-chain hydrogen bonding between rice starch and curdlan, resulting in a denser gel structure and thus increased moduli, solid-like behavior, and mechanical properties, and reduced frequency-dependence, especially at high temperatures (>65 °C). For example, with 50 % curdlan incorporation, G' (90 °C) improved by 252 %. Notably, thermal treatment can compromise the structural integrity of the rice starch gel, reducing strength and softening texture. However, this textural degradation can be effectively mitigated with, for example, 30 % curdlan incorporation, resulting in a 55-fold hardness increase at 85 °C. The knowledge gained from this work offers valuable guidance for tailoring starch-based gel products to specific properties.

Characterization, in vitro digestibility and release properties of starch-linoleic acid-sodium alginate composite film

This study aimed to improve the complexing degree, digestibility and controlled release properties of the potato starch (PS)-linoleic acid (LA) complexes by encapsulating PS-LA complexes to sodium alginate (AG) beads. The results revealed that AG had a positive effect on the complexing index, R1047/1022 values, relative crystallinity, enthalpy and morphological structure of PS-LA-AG films, especially for PS-LA-AG film with the PS-LA: AG of 5:1. The in vitro digestion and hydrolysis kinetic analysis indicated that AG addition reduced the digestibility of PS-LA-AG films to a higher slowly digestible starch content and resistant starch content and a lower equilibrium hydrolysis percentage and kinetic constant. Furthermore, in vivo release study of PS-LA-AG films indicated a restrained release in simulated gastrointestinal conditions. Consequently, the results indicated that AG addition significantly improved the inclusion efficiency for the complex formation between PS and LA, which was beneficial for the design of resistant films to entrap and control release of unsaturated fatty.

Development and characterization of rice bran-gum Arabic based encapsulated biofertilizer for enhanced shelf life and controlled bacterial release

Introduction

Currently, microbe-based approaches are being tested to address nutrient deficiencies and enhance nutrient use efficiency in crops. However, these bioinoculants have been unsuccessful at the commercial level due to differences in field and in-vivo conditions. Thus, to enhance bacterial stability, microbial formulations are considered, which will provide an appropriate microenvironment and protection to the bacteria ensuring better rhizospheric-colonization.

Methods

The present study aimed to develop a phosphobacterium-based encapsulated biofertilizer using the ion-chelation method, wherein a bacterial strain, Myroid gitamensis was mixed with a composite solution containing rice bran (RB), gum Arabic (GA), tricalcium phosphate, and alginate to develop low-cost and slow-release microbeads. The developed microbead was studied for encapsulation efficiency, shape, size, external morphology, shelf-life, soil release behavior, and biodegradability and characterized using SEM, FTIR, and XRD. Further, the wheat growth-promoting potential of microbeads was studied.

Results

The developed microbeads showed an encapsulation efficiency of 94.11%. The air-dried beads stored at 4°C were favorable for bacterial survival for upto 6 months. Microbeads showed 99.75% degradation within 110 days of incubation showing the bio-sustainable nature of the beads. The application of dried formulations to the pot-grown wheat seedlings resulted in a higher germination rate, shoot length, root length, fresh weight, dry weight of the seedlings, and higher potassium and phosphorus uptake in wheat.

Discussion

This study, for the first time, provides evidence that compared to liquid biofertilizers, the RB-GA encapsulated bacteria have better potential of enhancing wheat growth and can be foreseen as a future fertilizer option for wheat.

Construction and In Vitro Digestibility of Recrystallized Starch Encapsulated in Calcium Alginate Beads

In order to reduce the digestion rate of starch in human body and improve the content of slowly digestible starch (SDS) and resistant starch (RS), millimeter calcium alginate beads encapsulated with different proportions of recrystallized starch were constructed in this study. First, we prepared recrystallized starch (RS3) by debranching waxy corn starch and retrogradation, and then encapsulated RS3 in calcium alginate beads by the ionic gel method. The microstructure of the beads was observed by scanning electron microscope, and the gel texture properties, swelling properties, and in vitro digestibility of the beads were studied. The results showed that the beads after cooking still maintained high hardness and chewiness, and the swelling power and solubility of the beads were lower than that of native starch. Compared with native starch, the content of rapidly digestible starch (RDS) in beads decreased, while the content of SDS and RS increased. The sample with the highest content of RS is RS3₁@Alginate₁, whose content of RS is 70.10%, 52.11 times higher than that of waxy corn starch and 1.75 times higher than that of RS3. RS3 encapsulated in calcium alginate beads has a good encapsulation effect, and the content of SDS and RS is greatly increased. This study has important implications for reducing the digestion rate of starch and regulating the health of people with diabetes and obesity.

Encapsulated starch characteristics and its shell matrix mechanisms controlling starch digestion

Encapsulated starch can be classified as physically inaccessible starch or type 1 resistant starch (RS1), which is produced by encapsulating starch granules within food matrices using various encapsulation techniques. Encapsulated starch has the potential to be used as a functional ingredient in low-/medium-glycemic index (GI) foods as it can help control glycemic and insulin responses. Despite its remarkable benefits, the relevant information related to entrapped starch and its application is still insufficient and needs further elucidation. The objective of this work is to present a comprehensive overview of the current techniques utilized for the preparation of encapsulated starch and its characteristics, thereby extending the fundamental knowledge. Furthermore, this review delves into the mechanisms governing starch hydrolysis regulated by shell matrices and provides the prospective utilization of encapsulated starch in food production.

Encapsulation of Concentrated Solution Obtained by Block Freeze Concentration in Calcium Alginate and Corn Starch Calcium Alginate Hydrogel Beads

A model (sucrose and gallic acid) solution was concentrated by block freeze concentration (BFC) at three centrifugation cycles, and the solutions were encapsulated in calcium alginate and corn starch calcium alginate hydrogel beads. Static and dynamic tests determined the rheological behavior, differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) established thermal and structural properties, and the release kinetics was evaluated under in vitro simulated digestion experiment. The highest efficiency encapsulation value was close to 96%. As the concentrated solution increased in terms of solutes and gallic acid, the solutions were fitted to the Herschel-Bulkley model. Moreover, from the second cycle, the solutions exhibited the highest values of storage modulus (G') and loss modulus (G″), contributing to form a more stable encapsulation. The FTIR and DSC results demonstrated strong interactions between corn starch and alginate, establishing a good compatibility and stability in the bead formation. The kinetic release model under in vitro conditions was fitted to the Korsmeyer-Peppas model, demonstrating the significant stability of the model solutions inside the beads. Therefore, the present study proposes a clear and precise definition for the elaboration of liquid foods obtained by BFC and its incorporation inside an edible material that facilitates the controlled release in specific sites.

Development of Zn biofertilizer microbeads encapsulating Enterobacter ludwigii-PS10 mediated alginate, starch, poultry waste and its efficacy in Solanum lycopersicum growth enhancement

In the present farming era, rhizobacteria as beneficial biofertilizers can decrease the negative effects of Zinc (Zn) agrochemicals. However, their commercial viability and utility are constrained by their instability under field conditions. Thus, to enhance their stability, microbial formulations are considered, which will not only offer an appropriate microenvironment, and protection but also ensure a high rate of rhizospheric-colonization. The goal of this study was to create a new formulation for the Zn-solubilizing bacteria E. ludwigii-PS10. The studied formulation was prepared using the extrusion technique, wherein a composite solution containing alginate, starch, zinc oxide, and poultry waste was uniformly mixed with the bacterial strain PS10 to develop low-cost, eco-friendly, and slow-release microbeads. The produced microbead was spherical, and characterized by SEM, FTIR, and XRD. Further, the microbeads were analyzed for their survival stability over 3 months of storage at room temperature and 4 °C. The effect of the microbead on the vegetative growth of tomato plants was investigated. Results showed that 94 % of the encapsulated microbial beads (EMB) matrix was able to encapsulate the bacterial strain PS10. The dried EMB demonstrated a moisture content of 2.87 % and was able to preserve E. ludwigii-PS10 survival at room temperature at the rate of 85.6 %. The application of the microbead to the tomato plants significantly increased plant biomass and Zn content. As a result, our findings support the use of this novel EMB prepared using an alginate/poultry waste/starch mixture to increase bacterial cell viability and plant growth.

Calcium ion regulation of sodium alginate in pure buckwheat noodles shown by in vitro simulated digestion

The effects of calcium sodium alginate on quality and starch digestion of pure buckwheat noodles were investigated. The incorporation of calcium ions into noodles containing sodium alginate was found to reduce water absorption by the noodles during cooking, together with an increase of the turbidity. Calcium addition improved the noodle texture, as shown by the measurement of hardness, elasticity, adhesion, and chewability. In vitro simulations of digestion showed that calcium ion cross-linking with sodium alginate reduced glucose formation by approximately 23.3 mg/g. X-ray diffraction and Fourier transform infrared spectroscopy showed alterations in the crystal zone of the noodles induced by an alginate gel network, although no new chemical substances were generated. Noodles prepared by this exogenous method may be useful as functional foods for patients with diabetes.

Effect of silicon or cerium doping on the anti-inflammatory activity of biphasic calcium phosphate scaffolds for bone regeneration

Biphasic calcium phosphate (BCP) bioceramics composed of hydroxyapatite and β-tricalcium phosphate have attracted considerable attention as ideal bone substitutes for reconstructive surgery, orthopedics, and dentistry, owing to their similar chemical composition to bone mineral and biocompatibility. The addition of trace elements to BCP bioceramics, such as magnesium (Mg), cerium (Ce), and silicon (Si), can alter the physicochemical and biological properties of the resulting materials. To improve the anti-inflammatory activity of a pure BCP scaffold, this study developed a simple wet chemical precipitation and gel-casting method to fabricate microporous BCP scaffolds containing Si or Ce. The BCP scaffolds exhibited interconnected microporous structures with uniform micropores and unequiaxed grains. No changes in the phase composition and microstructure of the scaffolds with the Si or Ce doping were observed. Conversely, Si or Ce doping into the BCP crystal lattice influenced the in vitro biological activity of the scaffolds and the bone-forming ability of the cells cultured on the BCP scaffolds. The results of biological activity assays demonstrated that Ce-BCP promoted cell proliferation and osteogenic differentiation more effectively than the other scaffolds. In particular, Ce-BCP significantly suppressed the expression of bone-active cytokines via the anti-inflammatory and anti-oxidative effects. Therefore, Si- or Ce-doped BCP scaffolds can contribute to providing a new generation of bone graft substitutes.