Bioinspired phenol-amine chemistry for developing bioadhesives based on biomineralized cellulose nanocrystals

A review of cellulose-based catechol-containing functional materials for advanced applications

With the increment in global energy consumption and severe environmental pollution, it is urgently needed to explore green and sustainable materials. Inspired by nature, catechol groups in mussel adhesion proteins have been successively understood and utilized as novel biomimetic materials. In parallel, cellulose presents a wide class of functional materials rating from macro-scale to nano-scale components. The cross-over among both research fields alters the introduction of impressive materials with potential engineering properties, where catechol-containing materials supply a general stage for the functionalization of cellulose or cellulose derivatives. In this review, the role of catechol groups in the modification of cellulose and cellulose derivatives is discussed. A broad variety of advanced applications of cellulose-based catechol-containing materials, including adhesives, hydrogels, aerogels, membranes, textiles, pulp and papermaking, composites, are presented. Furthermore, some critical remaining challenges and opportunities are studied to mount the way toward the rational purpose and applications of cellulose-based catechol-containing materials.

Lobster-Inspired Chitosan-Derived Adhesives with a Biomimetic Design

Polysaccharide-based adhesives, especially chitosan (CS)-derived adhesives, serve as promising sustainable alternatives to traditional adhesives. However, most demonstrate a poor adhesive strength. Inspired by the inherent layered structure of marine arthropods (lobsters), a core-shell structure (SiO2-NH2@OPG) with amine-functionalized silica (SiO2-NH2) as the core and oxidized pyrogallol (OPG) as the shell is prepared in this study. The compound is blended with CS to produce a structural biomimetic wood adhesive (SiO2-NH2@OPG/CS) with excellent performance. In addition to thermocompressive curing, this adhesive exhibits a water-evaporation-induced curing behavior at room temperature. With reference to the design mechanism of the lobster cuticle, this microphase-separated structure consists of clustered nanofibers with varying amounts of SiO2-NH2@OPG particles between the fibers. This intriguing microphase structure and its mechanical effects could offer a powerful solution for improving the functional modification of wood composites.

Recent advances in TEMPO-oxidized cellulose nanofibers: Oxidation mechanism, characterization, properties and applications

Cellulose is the richest renewable polymer source on the earth. TEMPO-mediated oxidized cellulose nanofibers are deduced from enormously available wood biomass and functionalized with carboxyl groups. The preparation procedure of TOCNFs is more environmentally friendly compared to other cellulose, for example, MFC and CNCs. Due to the presence of functional carboxyl groups, TOCNF-based materials have been studied widely in different fields, including biomedicine, wastewater treatment, bioelectronics and others. In this review, the TEMPO oxidation mechanism, the properties and applications of TOCNFs are elaborated. Most importantly, the recent advanced applications and the beneficial role of TOCNFs in the various abovementioned fields are discussed. Furthermore, the performances and research progress on the fabrication of TOCNFs are summarized. It is expected that this timely review will help further research on the invention of novel material from TOCNFs and its applications in different advanced fields, including biomedicine, bioelectronics, wastewater treatment, and the energy sector.

Colloidal Phenol-Amine Coating on Implants for Improved Anti-Inflammation and Osteogenesis

Phenol-amine coatings have attracted significant attention in recent years owing to their adjustable composition and multifaceted biological functionalities. The current preparation of phenol-amine coatings, however, involves a chemical reaction within the solution or interface, resulting in lengthy preparation times and necessitating specific reaction conditions, such as alkaline environments and oxygen presence. The facile, rapid, and eco-friendly preparation of phenol-amine coatings under mild conditions continues to pose a challenge. In this study, we use a macromolecular phenol-amine, Tanfloc, to form a stable colloid under neutral conditions, which was then rapidly adsorbed on the titanium surface by electrostatic action and then spread and fused to form a continuous coating within several minutes. This nonchemical preparation process was rapid, mild, and free of chemical additives. The in vitro and in vivo results showed that the Tanfloc colloid fusion coating inhibited destructive inflammation, promoted osteogenesis, and enhanced osteointegration. These remarkable advantages of the colloidal phenol-amine fusion coating highlight the suitability of its future application in clinical practice.

A tough bio-adhesive inspired by pearl layer and arthropod cuticle structure with desirable water resistance, flame-retardancy, and antibacterial property

Petroleum-derived formaldehyde resin adhesives are serious hazards to human health and depend on limited resources. Abundant, cheap and renewable biomass materials are expected to replace them. However, the contradictory mechanisms of high mechanical strength and fracture toughness affect the use of bioadhesives. Herein, a biomimetic soybean meal (SM) adhesive inspired by the structure of insect cuticles and shell pearl layer was proposed. Specifically, chitosan (CS@DA) modified 3,4-dihydroxybenzoic acid (DA, rich in catechol moiety) was anchored on molybdenum disulfide nanosheets (MoS2) to construct a biomimetic structure with copper hydroxide and SM substrate (SM-MoS2/CS@DA-Cu). Schiff base, ionic, and hydrogen bonding strengthened the cohesion of the adhesive. The ordered alternating stacking "brick-mortar" structure stimulated the lamellar sliding and crack deflection of MoS2, synergistically reinforcing the toughness. Compared to SM adhesive (0.57 MPa and 0.148 J), the wet shear strength and adhesion work of the SM-MoS2/CS@DA-Cu were 1.68 MPa and 0.867 J, with 194.7 % and 485.8 % increases, respectively. The multiple antimicrobial effects of CS@DA, Schiff base, and Cu2+ increased the applicability period of the adhesive to 40 days. The adhesive also displayed favorable water resistance and flame retardancy. Therefore, this peculiar and efficient biomimetic structural design inspired the development of multi-functional composites.

Self-Cross-Linkable Chitosan-Alginate Complexes Inspired by Mussel Glue Chemistry

In this study, mussel-inspired chemistry, based on catechol-amine reactions, was adopted to develop self-cross-linkable chitosan-alginate (Chi-Alg) complexes. To do so, the biopolymers were each substituted with ∼20% catechol groups (ChiC and AlgC), and then four complex combinations (Chi-Alg, ChiC-Alg, Chi-AlgC, ChiC-AlgC) were prepared at the surface and in bulk solution. Based on QCM-D and lap shear adhesion tests, the complex with catechol only on Chi (ChiC-Alg) did not show a significant variation from the control complex (Chi-Alg). Conversely, the complexes with catechol on alginate (Chi-AlgC and ChiC-AlgC) rendered a self-cross-linking property and enhanced cohesive properties.

Functionalized cellulose nanofibrils based supramolecular system-assisted molding enabled strong, antibacterial chitosan bioplastics

Bioplastics are considered as potential alternatives to non-renewable and non-biodegradable petroleum-based plastics. Inspired by ionic and amphiphilic properties of mussel protein, we proposed a versatile and facile strategy for the fabrication of a high-performance chitosan (CS) composite film. This technique incorporates a cationic hyperbranched polyamide (QHB) and a supramolecular system based on the lignosulphonate (LS)-functionalized cellulose nanofibrils (CNF) (LS@CNF) hybrids. The cationic QHB was synthesized by a one-step process from hyperbranched polyamide and quaternary ammonium salt. Meanwhile, the functional LS@CNF hybrids act as a well-dispersed and rigid cross-linked domain in CS matrix. Owing to the interconnected hyperbranched and enhanced supramolecular network, the toughness and tensile strength of the CS/QHB/LS@CNF film simultaneously increased to 19.1 MJ/m³ and 50.4 MPa, 170.2 % and 72.6 % higher than the pristine CS film. Additionally, the functional QHB/LS@CNF hybrids endow the films with superior antibacterial activity, water resistance, UV shielding, and thermal stability. This bioinspired strategy provides a novel and sustainable method for the production of multifunctional CS films.

Development of eco-friendly antifungal and antibacterial adhesive derived from modified cassava starch waste/polyvinyl alcohol containing green synthesized nano-silver

Environmentally friendly biopolymer-based wood adhesives are an inevitable trend of wood product development to replace the use of harmful formaldehyde-based adhesives. In this research, a new eco-friendly modified cassava starch waste-based adhesive via carboxymethylation (CMS), and blending with polyvinyl alcohol (PVA), tannic acid (TA) and green synthesized silver nanoparticles (AgNPs) was prepared. The effects of TA content on green synthesis of AgNPs (Ag-TA) and bio-adhesive nanocomposite properties were investigated. The use of 5 wt% TA for AgNPs synthesis (Ag-TA-5) resulted in a uniform particle size distribution. The plywood prepared with Ag-TA-5 provided the highest dry and wet shear strength at 1.95 ± 0.11 MPa and 1.38 ± 0.3 MPa, respectively. The water absorption and thickness swelling of this plywood remarkably decreased up to 10.99% and 6.79%, respectively. More importantly, the presence of Ag-TA in CMS/PVA adhesive successfully inhibited the invasion of mold and bacteria. Based on the cyclic delamination test, the adhesive bond durability of bio-adhesive containing Ag-TA-5 could meet the requirement of the AITC Test T110-2007 and was comparable to commercial adhesives. The added advantage of the prepared bio-adhesive was its synthesis from agro-waste products and possible economically viable production at industrial level.

Alginate/polyacrylamide host-guest supramolecular hydrogels with enhanced adhesion

Although injectable hydrogels with minimally invasive delivery have garnered significant interest, their potential applications have been restricted by a singular property. In this study, a supramolecular hydrogel system with improved adhesion was constructed through host-guest interactions between alginate and polyacrylamide. The maximum tensile adhesion strength between the β-cyclodextrin and dopamine-grafted alginate/adamantane-grafted polyacrylamide (Alg-βCD-DA/PAAm-Ad, namely AβCDPA) hydrogels and pigskin reached 19.2 kPa, which was 76 % stronger than the non-catechol-based control hydrogel (β-cyclodextrin-grafted alginate/adamantane-grafted polyacrylamide, Alg-βCD/PAAm-Ad). Moreover, the hydrogels demonstrated excellent self-healing, shear-thinning, and injectable properties. The required pressure to extrude the AβCDPA2 hydrogel from a 16G needle at a rate of 2.0 mL/min was 67.4 N. As the polymer concentration and adamantane substitution degree increased, the hydrogels exhibited higher modulus, stronger network structure, and lower swelling ratio and degradation rate. Encapsulating and culturing cells within these hydrogels demonstrated good cytocompatibility. Therefore, this hydrogel can serve as a viscosity extender or bioadhesive, and as a carrier material to deliver encapsulated therapeutic substances into the body through minimally invasive injection methods.

Influence of silylated nano cellulose reinforcement on the mechanical, water resistance, thermal, morphological and antibacterial properties of soy protein isolate (SPI)-based composite films

The aim of this research work is to improve the mechanical and water-resistance properties of soy protein isolate (SPI) biofilm. In this work, 3-aminopropyltriethoxysilane (APTES) coupling agent modified nanocellulose was introduced into the SPI matrix in the presence of citric acid cross-linker. The presence of amino groups in APTES facilitated to form cross-linked structures with soy protein. The incorporation of a citric acid cross-linker made the cross-linking process more productive, and the surface smoothness of the film was confirmed by a Scanning Electron Microscope (FE-SEM). From the study of the mechanical and thermal properties and water resistance of the film, it was confirmed that the results were highly satisfactory for the modified nanocellulose incorporated film compared to the non-modified one. Additionally, coating of citral essential oil onto SPI nanocomposite film displayed antimicrobial properties due to the presence of various phenolic groups in the citral oil. The Tensile Strength and Young's Modulus of silane-modified nanocellulose containing film were enhanced by ~119 % and ~ 112 %, respectively on incorporation of 1 % APTES-modified nanocellulose. Consequently, this work is expected to offer an effective way for silylated nano-cellulose reinforcing soy protein isolate (SPI) based bio nanocomposite films for packaging applications. As an example, we have demonstrated one of the application as wrapping films for packing black grapes.

Investigating functional properties of halloysite nanotubes and propolis used in reinforced composite film based on soy protein/basil seed gum for food packaging application

This study aimed to investigate the effect of halloysite nanotubes (HNTs) on the physicochemical characteristics of the soy protein isolated/basil seed gum (SPI/BSG) film activated with propolis (PP). The obtained results of scanning electron microscope (SEM), thermal gravimetric analysis (TGA), and tensile investigations illustrated that the addition of HNTs as nanofiller led to positive changes in the morphology, thermal stability, and mechanical characteristics of SPI/BSG films. The barrier properties of films considerably decreased with incorporation of HNTs. Furthermore, the encapsulation of PP as bioactive agent into the produced films significantly increased (P < 0.05) the antioxidant potential of the samples in DPPH radical-scavenging activity assays. The antibacterial effects of film also significantly increased (P < 0.05) after the encapsulation of PP. In conclusion, the produced films illustrated acceptable efficiency for usage in food packaging system.

Natural organic-inorganic hybrid structure enabled green biomass adhesive with desirable strength, toughness and mildew resistance

Plant based proteins are green, sustainable, and renewable materials that show the potential to replace traditional formaldehyde resin. High performance plywood adhesives exhibit high water resistance, strength, toughness, and desirable mildew resistance. Adding petrochemical-based crosslinkers is not economically viable or environmentally benign; this chemical crosslinking strategy makes the imparted high strength and toughness less attractive. Herein, a green approach based on natural organic-inorganic hybrid structure enhancement is proposed. The design of soybean meal-dialdehyde chitosan-amine modified halloysite nanotubes (SM-DACS-HNTs@N) adhesive with desirable strength and toughness enhanced by covalent bonding (Schiff base) crosslinking and toughened by surface-modified nanofillers is demonstrated. Consequently, the prepared adhesive showed a wet shear strength of 1.53 MPa and work of debonding of 389.7 mJ, which increased by 146.8 % and 276.5 %, respectively, due to the cross-linking effect of organic DACS and toughening effect of inorganic HNTs@N. The introduction of DACS and Schiff base generation enhanced the antimicrobial property of the adhesive and increased the mold resistance of the adhesive and plywood. In addition, the adhesive has good economic benefits. This research creates new opportunities for developing biomass composites with desirable performance.

Chitosan-tannin adhesive: Fully biomass, synthesis-free and high performance for bamboo-based composite bonding

Inspired by phenol-amine chemistry of mussels, a synthesis-free and fully biomass adhesive composed of chitosan and tannin (CST) was successfully developed by a facile method. The performance of CST adhesive for bonding bamboo, wood and bamboo-wood substrates were tested. When 160 °C hot-press temperature was used, dry lap shear strength above 5.00 MPa was obtained. The CST adhesive has remarkable water resistance and low cure temperature as high wet shear strength of 2.37 MPa for plybamboo specimens was achieved after 3 h boiling in water even though low hot-press temperature of 100 °C was applied. Further, high strength of 1.78 MPa remained after 72 h boiling. With higher hot-press temperatures used, wet shear strength above 3.60 MPa was achieved. The adhesion performance for wood substrate was also superior to other phenol-amine adhesives reported in literatures. The bamboo-wood composites assembled with CST adhesive show excellent mechanical performance, specifically modulus of rupture (MOR) of 100-133 MPa and modulus of elasticity (MOE) of 10-13 GPa were achieved with different hot-press temperatures used. Given the advantages including outstanding water resistance, facile preparation, fully biomass, and low cure temperature, CST adhesive exhibited great potential to be an ideal alternative to formaldehyde-based resin for wood and bamboo bonding.