Selective benzylic oxidation of alkylaromatics over Cu/SBA-15 catalysts under solvent-free conditions

A Keggin-type polyoxometalate-based metal-organic complex as a highly efficient heterogeneous catalyst for the selective oxidation of alkylbenzenes

The direct oxidation of C-H bonds in organic materials into necessary oxygen-containing compounds under mild conditions has attracted increasing attention. A Keggin-type polyoxometalate-based metal-organic complex (MOC), [CuII4Cu^I(H₂trz)₄(C₂O₄)(H₂O)₄(H₃PW_11.18CuII0.82O₄₀)]·8H₂O (1) (H₃trz = 1,2,4-triazole), was designed and synthesized under hydrothermal conditions, and was structurally characterized by single crystal X-ray diffraction, PXRD, IR spectroscopy, TGA, and XPS. Complex 1 is a 3D 4,6,8-connected architecture derived from [Cu₅(H₂trz)₄(C₂O₄)₂(H₂O)₂]_n units and [PW_11.18Cu_0.82O₄₀]^6- anions, which can catalytically oxidize various types of alkylbenzenes. Gas chromatographic analysis showed that complex 1 as a heterogeneous catalyst could effectively catalyze the oxidation of diphenylmethane with 93% conversion and 99% selectivity within 6 h. In addition, the conversion for the catalytic oxidation of ethylbenzene was 96% with 99% selectivity. Compared with some reported catalysts, complex 1 exhibited a better catalytic effect and lower reaction time. Meanwhile, the catalytic oxidation of other benzyl derivatives with complex 1 was also investigated, which indicated that complex 1 possessed excellent catalytic performance.

Solvent-free benzylic oxidation of aromatics over Cu(II)-containing propylsalicylaldimine anchored on the surface of mesoporous silica catalysts

A sustainable method was used to produce aromatic ketones by the solvent-free benzylic oxidation of aromatics over mesoporous Cu(II)-containing propylsalicylaldimine anchored on the surface of Santa Barbara Amorphous type material-15 (CPSA-SBA-15) catalysts. For comparison, mesoporous Cu(II)-containing propylsalicylaldimine anchored with Mobil Composition of Matter-41 (CPSA-MCM-41) was assessed for these reactions under similar reaction conditions. The washed CPSA-SBA-15(0.2) (W-CPSA-SBA-15(0.2)) catalyst was prepared using an easy chemical method for the complete removal of non-framework CuO nanoparticle species on the surface of pristine CPSA-SBA-15(0.2) (p-CPSA-SBA-15(0.2) prepared with 0.2 wt% of Cu, and its catalytic activity was evaluated with different reaction parameters, oxidants and solvents. In order to confirm the catalytic stability, the recyclability was assessed, and the performance of hot-filtration experiments was also evaluated. All the catalysts used for these catalytic reactions were characterized using many instrumental techniques to pinpoint the mesoporous nature and active sites of the catalysts. The proposed reaction mechanism has been well documented on the basis of catalytic results obtained for solvent-free oxidation of aromatics. Based on the catalytic results, we found that W-CPSA-SBA-15(0.2) is a very ecofriendly catalyst with exceptional catalytic activity.

Preparation and characterization of a copper oxide nanoparticle-supported red-mud catalyst for liquid phase oxidation of ethyl benzene to acetophenone

In this study, liquid phase oxidation of ethyl benzene to acetophenone was widely investigated using a new recyclable supported catalyst of CuO nanoparticles impregnated over activated red-mud (CuO_AARM).

Finely dispersed CuO on nitrogen-doped carbon hollow nanospheres for selective oxidation of sp3 C–H bonds

Selective oxidation of sp3 C–H bonds has been demonstrated using a novel nanocomposite, CuO/N-C-HNSs, as the catalyst.

Hydrogen-free hydrogenation of nitrobenzene via direct coupling with cyclohexanol dehydrogenation over ordered mesoporous MgO/SBA-15 supported Cu nanoparticles

Direct catalytic coupling of nitrobenzene hydrogenation and cyclohexanol dehydrogenation was studied in the gas phase over mesoporous MgO-SBA15 supported Cu nanoparticles. This approach avoids an external supply of H2 and utilizes the in situ liberated H2 from the dehydrogenation step of the first reactant for the hydrogenation reaction of the second reactant. A catalyst series consisting of four Cu/MgO-SBA15 mesoporous solids with varying Cu loadings (5-20 wt%) were prepared and systematically characterized by BET, ICP, XRD, TPR, TPD, FT-IR, SEM, XPS, and TEM. Among the series, the 15 wt% Cu catalyst exhibited the best performance with ≥82% conversion of nitrobenzene along with ≥89% cyclohexanol conversion. In addition, significantly higher yields of cyclohexanone (83%) and aniline (75%) could be achieved successfully over the same catalyst. Furthermore, the catalyst exhibited almost stable activity during 30 h time-on-stream with slow deactivation. The highly ordered mesoporous silica increases the metal-support interaction with smaller particles of Cu on the surface, and the synergism between acid-base sites is responsible for the improved catalytic activity.

SBA-15 Anchored Metal Containing Catalysts in the Oxidative Desulfurization Process

Recalcitrant sulfur compounds are common impurities in crude oil. During combustion they produce SOx derivatives that are able to affect the atmospheric ozone layer, increasing the formation of acid rains, and reducing the life of the engine due to corrosion. In the last twenty years, many efforts have been devoted to develop conventional hydrodesulfurization (HDS) procedures, as well as alternative methods, such as selective adsorption, bio-desulfurization, oxidative desulfurization (ODS) under extractive conditions (ECODS), and others. Among them, the oxidative procedures have been usually accomplished by the use of toxic stoichiometric oxidants, namely potassium permanganate, sodium bromate and carboxylic and sulfonic peracids. As an alternative, increasing interest is devoted to selective and economical procedures based upon catalytic methods. Heterogeneous catalysis is of relevance in industrial ODS processes, since it reduces the leaching of active species and favors the recovery and reuse of the catalyst for successive transformations. The heterogenization of different types of high-valent metal transition-based organometallic complexes, able to promote the activation of stoichiometric benign oxidants like peroxides, can be achieved using various solid supports. Many successful cases have been frequently associated with the use of mesoporous silicas that have the advantage of easy surface modification by reaction with organosilanes, facilitating the immobilization of homogeneous catalysts. In this manuscript the application of SBA-15 as efficient support for different active metal species, able to promote the catalytic ODS of either model or real fuels is reviewed, highlighting its beneficial properties such as high surface area, narrow pore size distribution and tunable pore diameter dimensions. Related to this topic, the most relevant advances recently published, will be discussed and critically described.

V2O5/SBA-15 nanocatalysts for the selective synthesis of 2,3,5-trimethyl-1,4-benzoquinone at room temperature

The molecular designed dispersion method yielded monodispersed nanoscale (4–7.5 nm sized) V₂O₅ dimeric species on SBA-15, which oxidized TMP into TMBQ with H₂O₂ under green conditions.

Fe3O4 magnetic nanoparticles (MNPs) as an efficient catalyst for selective oxidation of benzylic and allylic C–H bonds to carbonyl compounds with tert-butyl hydroperoxide

Fe₃O₄ MNP as an eco-friendly catalyst was prepared, characterized and applied for oxidation of benzylic and allylic C–H bonds.

Catalytic Oxidation of Alkyl Benzene

Oxidation of benzylic C-H bonds of alkyl benzene for the synthesis of corresponding carbonyl compounds is a very important reaction for both commercial manufacturing and basic research. This paper reviews various kinds of catalysts involved in the oxidation of alkyl aromatic and their activity in various conditions and probable mechanism of action where applicable. The rate of conversion of alkyl aromatic and per cent of the yield of the corresponding products for each catalyst has been included.

Oxidative coupling of primary amines to imines under base-free and additive-free conditions over AuNPs/SBA-NH2 nanocatalyst

Oxidative coupling of benzylamines to N-benzylbenzylimines under base- and additive-free conditions is achieved over AuNPs/SBA-NH₂. Facile preparation, high activity, ease of separation and good reusability are the credentials of AuNPs/SBA-NH₂ catalyst.