Catalytic conversion of carbohydrates to levulinic acid with mesoporous niobium-containing oxides

H2SO4 assisted hydrothermal conversion of biomass with solid acid catalysis to produce aviation fuel precursors

With hydrothermal reaction, lignocellulosic biomass can be efficiently converted into furfural (FF) and levulinic acid (LA), both of which are key platform compounds that can be used for the subsequent preparation of aviation fuels. In order to reduce the acid concentration in traditional hydrolysis and provide a reaction system with good catalytic activity, we propose a biomass conversion route as dilute acid hydrolysis coupled with solid acid catalysis. Firstly, at different temperatures, the hemicellulose and cellulose in corn stover were step-hydrolyzed by sulfuric acid solution with a concentration of 0.9 wt. % to produce xylose and glucose, with conversion reaching 100% and 97.3%, respectively. Subsequently, a new resin-derived carbon-based solid acid catalyst was used to catalyze the aforementioned saccharide solutions to obtain FF with yield of 68.7 mol % and LA of 70.3 mol %, respectively. This work provides a promising approach for the efficient production of bio-aviation fuel precursors.

Conversion of Glucose to 5-Hydroxymethylfurfural Using Consortium Catalyst in a Biphasic System and Mechanistic Insights

We found an effective catalytic consortium capable of converting glucose to 5-hydroxymethylfurfural (HMF) in high yields (50%). The reaction consists of a consortium of a Lewis acid (NbCl5) and a Brønsted acid (p-sulfonic acid calix[4]arene (CX4SO3H)), in a microwave-assisted reactor and in a biphasic system. The best result for the conversion of glucose to HMF (yield of 50%) was obtained with CX4SO3H/NbCl5 (5 wt%/7.5 wt%), using water/NaCl and MIBK (1:3), at 150 °C, for 17.5 min. The consortium catalyst recycling was tested, allowing its reuse for up to seven times, while maintaining the HMF yield constant. Additionally, it proposed a catalytic cycle by converting glucose to HMF, highlighting the following two key points: the isomerization of glucose into fructose, in the presence of Lewis acid (NbCl5), and the conversion of fructose into HMF, in the presence of CX4SO3H/NbCl5. A mechanism for the conversion of glucose to HMF was proposed and validated.

Niobium: The Focus on Catalytic Application in the Conversion of Biomass and Biomass Derivatives

The world scenario regarding consumption and demand for products based on fossil fuels has demonstrated the imperative need to develop new technologies capable of using renewable resources. In this context, the use of biomass to obtain chemical intermediates and fuels has emerged as an important area of research in recent years, since it is a renewable source of carbon in great abundance. It has the benefit of not contributing to the additional emission of greenhouse gases since the CO2 released during the energy conversion process is consumed by it through photosynthesis. In the presented review, the authors provide an update of the literature in the field of biomass transformation with the use of niobium-containing catalysts, emphasizing the versatility of niobium compounds for the conversion of different types of biomass.

Levulinic Acid Production from Waste Corncob Biomass Using an Environmentally Benign WO3-Grafted ZnCo2O4@CeO2 Bifunctional Heterogeneous Catalyst

Herein, a novel and environmentally benign solid catalyst was fabricated by grafting WO₃ active species onto the ZnCo₂O₄@CeO₂ support for efficient levulinic acid production from corncob waste biomass. The morphological, compositional, and textural properties of the designed catalyst were investigated using different characterization techniques to identify suitable catalyst formulation with enhanced catalytic activity and stability. The results demonstrated that WO₃ active species were successfully loaded with uniform distribution onto the support to develop a robust catalyst with both acidic and basic sites. The experimental investigation showed that among the catalysts, WO₃(10 wt %)/ZnCo₂O₄@CeO₂ exhibited the best catalytic activity, providing a maximum levulinic acid yield of 78.49% at the optimal conditions of 6 wt % catalyst dosage, reaction temperature of 180 °C, and reaction time of 200 min. The presence of an optimum number of both acid and base active sites on the catalyst surface could lead to the highest catalytic activity of the synthesized catalyst. Finally, the reusability investigation indicated that the synthesized catalyst possessed sufficient recyclability of up to four times for the levulinic acid production from the selected biomass with negligible drop in the catalytic activity.

Nanocrystalline rhenium-doped TiO2: an efficient catalyst in the one-pot conversion of carbohydrates into levulinic acid. The synergistic effect between Brønsted and Lewis acid sites

A new approach of inserting rhenium into a TiO2 structure generates Brønsted acid sites which are essential for conversion of carbohydrates into levulinic acid.

Mini-Review on the Synthesis of Furfural and Levulinic Acid from Lignocellulosic Biomass

Efficient conversion of renewable biomass into value-added chemicals and biofuels is regarded as an alternative route to reduce our high dependence on fossil resources and the associated environmental issues. In this context, biomass-based furfural and levulinic acid (LA) platform chemicals are frequently utilized to synthesize various valuable chemicals and biofuels. In this review, the reaction mechanism and catalytic system developed for the generation of furfural and levulinic acid are summarized and compared. Special efforts are focused on the different catalytic systems for the synthesis of furfural and levulinic acid. The corresponding challenges and outlooks are also observed.

Recent advances in the synthesis and applications of mordenite zeolite - review

Among the many industrially important zeolites, mordenite is found to be interesting because of its unique and exceptional physical and chemical properties. Mordenite (high silica zeolite) is generally prepared by the hydrothermal method using TEA+ cations. TEA+ cations are the best templating agent, though they can create a number of issues, for instance, generating poison and high manufacturing cost, wastewater contamination, and environmental pollution. Hence, it is necessary to find a mordenite synthesis method without using an organic template or low-cost template. In this review, a number of unique sources were used in the preparation of mordenite zeolite, for instance, silica sources (rice husk ash, silica gel, silica fumes), alumina sources (metakaolin, faujasite zeolite) and sources containing both silica and alumina (waste coal fly ash). These synthesis approaches are also based on the absence of a template or low-cost mixed organic templates (for instance, glycerol (GL), ethylene glycol (EG), and polyethylene glycol 200 (PEG)) or pyrrolidine-based mesoporogen (N-cetyl-N-methylpyrrolidinium) modifying the mordenite framework which can create unique properties. The framework properties and optical properties (indium-exchanged mordenite zeolite) have been discussed. Mordenite is generally used in alkylation, dewaxing, reforming, hydrocracking, catalysis, separation, and purification reactions because of its large pore size, strong acidity, and high thermal and chemical stability, although the applications are not limited for mordenite zeolite. Recently, several applications such as electrochemical detection, isomerization, carbonylation, hydrodeoxygenation, adsorption, biomass conversion, biological applications (antibacterial activity), photocatalysis, fuel cells and polymerization reactions using mordenite zeolite were explored which have been described in detail in this review.

Catalytic Upgrading of Biomass-Derived Sugars with Acidic Nanoporous Materials: Structural Role in Carbon-Chain Length Variation

Shifting from petroleum-based resources to inedible biomass for the production of valuable chemicals and fuels is one of the significant aspects in sustainable chemistry for realizing the sustainable development of our society. Various renowned biobased platform molecules, such as 5-hydroxymethylfurfural, furfural, levulinic acid, and lactic acid, are successfully accessible from the transformation of biobased sugars. To achieve the specific reaction routes, heterogeneous nanoporous acidic materials have served as promising catalysts for the conversion of bio-sugars in the past decade. This Review summarizes advances in various nanoporous acidic materials for bio-sugar conversion, in which the number of carbon atoms is variable and controllable with the assistance of the switchable structure of nanoporous materials. The major focus of this Review is on possible reaction pathways/mechanisms and the relationships between catalyst structure and catalytic performance. Moreover, representative examples of catalytic upgrading of biobased platform molecules to biochemicals and fuels through selective C-C cleavage and coupling strategies over nanoporous acidic materials are also discussed.