Factors affecting the efficiency of Nafion-based catalytic membranes in the selective oxidation of light paraffins mediated by the Fenton system

Potential of Pervaporation and Vapor Separation with Water Selective Membranes for an Optimized Production of Biofuels—A Review

The development of processes based on the integration of new technologies is of growing interest to industrial catalysis. Recently, significant efforts have been focused on the design of catalytic membrane reactors to improve process performance. In particular, the use of membranes, that allow a selective permeation of water from the reaction mixture, positively affects the reaction evolution by improving conversion for all reactions thermodynamically or kinetically limited by the presence of water. In this paper, how pervaporation (PV) and vapor permeation (VP) technologies can improve the catalytic performance of reactions of industrial interest is considered. Specifically, technological approaches proposed in the literature are discussed with the aim of highlighting advantages and problems encountered in order to address research towards the optimization of membrane reactor configurations for liquid biofuel production in large scale.

Degradation of organic pollutants by an integrated photo-Fenton-like catalysis/immersed membrane separation system

To resolve the continuously reuse problem of fine catalysts, a new reactor was investigated by coupling the heterogeneous photo-Fenton-like oxidation with membrane separation. The reactor consisted of a Xe lamp, a submerged membrane module and FeVO(4) as catalyst with high activity. Results showed that the catalyst was successfully left in the reactor. It was proved by the kinetics study of membrane fouling that the avoidless membrane fouling was brought mainly by surface cake, at catalyst concentration of 4 g/L, it accounted for more than 90% of the total resistance. The kinetics study of catalytic degradation of AO II under sub-critical flux showed the optimal concentration of catalyst was 0.5 g/L and under this concentration the membrane fouling was negligible. For a residence time of 60 min, the degradation efficiency of AO II reached more than 99% and the chemical oxygen demand (COD) removal efficiency was as high as 91%. The model of continuous stirred tank reactor could predict well for the degradation which was consistent with hydrodynamics study. Moreover, the PFM reactor shows a long-term behavior with both membrane and catalyst in it and merits consideration for scaled-up trials.