Influence of reaction conditions on product distribution in the green oxidation of cyclohexene to adipic acid with hydrogen peroxide

Gas-Phase Characterization of Adipic Acid, 6-Hydroxycaproic Acid, and Their Thermal Decomposition Products by Rotational Spectroscopy

We report the spectroscopic investigation of two bifunctional aliphatic carboxylic acids, namely, adipic acid and 6-hydroxycaproic acid, in the gas phase by combining high-resolution rotational spectroscopy and supersonic expansions. Their pure rotational spectra were successfully identified and characterized. However, due to the low thermal stability of these two chemicals, the measured rotational spectra were significantly congested with transitions corresponding to their decomposition products upon heating. We observed cyclopentanone and adipic anhydride in the spectrum of adipic acid and ε-caprolactone and its monohydrate in the spectrum of 6-hydroxycaproic acid. On the basis of the distinct fingerprints of both carboxylic acids and a series of their decomposition products, the spectra were analyzed in a time-segmented manner. This provides valuable insights into the thermal decomposition mechanisms of these two samples over time, which highlights the robustness of microwave spectroscopy as a potent tool for analyzing complex chemical mixtures in a species-, isomer-, and conformer-selective way.

Heterogeneous H2O2-based selective oxidations over zirconium tungstate α-ZrW2O8

Catalytic properties of a crystalline zirconium tungstate, ZrW2O8, the material known mainly for its isotropic negative coefficient of thermal expansion, have been assessed for the liquid-phase selective oxidation of a range of organic substrates comprising CC, OH, S and other functional groups using aqueous hydrogen peroxide as the green oxidant. Samples of ZrW2O8 were prepared by hydrothermal synthesis and characterised by N2 adsorption, PXRD, SEM, EDX, FTIR and Raman spectroscopic techniques. Studies by IR spectroscopy of adsorbed probe molecules (CO and CDCl3) revealed the presence of Brønsted acidic and basic sites on the surface of ZrW2O8. It was demonstrated that ZrW2O8 is able to activate H2O2 under mild conditions and accomplish the epoxidation of CC bonds in alkenes and unsaturated ketones, oxidation of thioethers to sulfoxides and sulfones, along with the oxidation of alcoholic functions to produce ketones and aldehydes. The oxidation of tetramethylethylene and α-terpinene over ZrW2O8 revealed the formation of peroxidation products, 2,3-dimethyl-3-butene-2-hydroperoxide and endoperoxide ascaridole, respectively, indicating the involvement of singlet oxygen in the oxidation process. The ZrW2O8 catalyst preserves its structure and morphology under the turnover conditions and does not suffer from metal leaching. It can be easily recovered, regenerated by calcination, and reused without the loss of activity and selectivity.

Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers

Access to a wide range of plastic materials has been rationalized by the increased demand from growing populations and the development of high-throughput production systems. Plastic materials at low costs with reliable properties have been utilized in many everyday products. Multibillion-dollar companies are established around these plastic materials, and each polymer takes years to optimize, secure intellectual property, comply with the regulatory bodies such as the Registration, Evaluation, Authorisation and Restriction of Chemicals and the Environmental Protection Agency and develop consumer confidence. Therefore, developing a fully sustainable new plastic material with even a slightly different chemical structure is a costly and long process. Hence, the production of the common plastic materials with exactly the same chemical structures that does not require any new registration processes better reflects the reality of how to address the critical future of sustainable plastics. In this review, we have highlighted the very recent examples on the synthesis of common monomers using chemicals from sustainable feedstocks that can be used as a like-for-like substitute to prepare conventional petrochemical-free thermoplastics.

Liquid-Phase Cyclohexene Oxidation with O2 over Spray-Flame-Synthesized La1-x Srx CoO3 Perovskite Nanoparticles

La_1−xSr_xCoO₃ (x=0, 0.1, 0.2, 0.3, 0.4) nanoparticles were prepared by spray‐flame synthesis and applied in the liquid‐phase oxidation of cyclohexene with molecular O₂ as oxidant under mild conditions. The catalysts were systematically characterized by state‐of‐the‐art techniques. With increasing Sr content, the concentration of surface oxygen vacancy defects increases, which is beneficial for cyclohexene oxidation, but the surface concentration of less active Co²⁺ was also increased. However, Co²⁺ cations have a superior activity towards peroxide decomposition, which also plays an important role in cyclohexene oxidation. A Sr doping of 20 at. % was found to be the optimum in terms of activity and product selectivity. The catalyst also showed excellent reusability over three catalytic runs; this can be attributed to its highly stable particle size and morphology. Kinetic investigations revealed first‐order reaction kinetics for temperatures between 60 and 100 °C and an apparent activation energy of 68 kJ mol⁻¹ for cyclohexene oxidation. Moreover, the reaction was not affected by the applied O₂ pressure in the range from 10 to 20 bar. In situ attenuated total reflection infrared spectroscopy was used to monitor the conversion of cyclohexene and the formation of reaction products including the key intermediate cyclohex‐2‐ene‐1‐hydroperoxide; spin trap electron paramagnetic resonance spectroscopy provided strong evidence for a radical reaction pathway by identifying the cyclohexenyl alkoxyl radical.

A decatungstate-based ionic liquid exhibiting a very low dielectric constant suitable for acting as a solvent and a catalyst for the oxidation of organic substrates

The use of a POM-based ionic liquid both as an efficient solvent and as a catalyst for the oxidation of organic substrates.

Recent Progress in Adipic Acid Synthesis Over Heterogeneous Catalysts

Adipic acid is one of the most important feedstocks for producing resins, nylons, lubricants, plasticizers. Current industrial petrochemical process, producing adipic acid from KA oil, catalyzed by nitric acid, has a serious pollution to the environment, due to the formation of waste nitrous oxide. Hence, developing cleaner methods to produce adipic acid has attracted much attention of both industry and academia. This mini-review article discussed advances on adipic acid synthesis from bio-renewable feedstocks, as well as most recent progress on cleaner technology from fossil fuels over novel catalytic materials. This work on recent advances in green adipic acid production will provide insights and guidance to further study of various other industrial processes for producing nylon precursors.

Selective cyclohexene oxidation with O2, H2O2 and tert-butyl hydroperoxide over spray-flame synthesized LaCo1−xFexO3 nanoparticles

A series of spray-flame made LaCo_1−xFe_xO₃ nanoparticles showed promising activity for liquid-phase cyclohexene oxidation. Various oxidizing agents, i.e., O₂, H₂O₂ and tert-butyl hydroperoxide, led to different product selectivities.

Recent trends in the development of sustainable catalytic systems for the oxidative cleavage of cycloalkenes by hydrogen peroxide

This review proposes a comprehensive, critical, and accessible assessment of reaction conditions for cycloolefin oxidative cleavage regarding green chemistry criteria.

Progress Towards Direct Hydrogen Peroxide Fuel Cells (DHPFCs) as an Energy Storage Concept

This review introduces the concept of direct H2O2 fuel cells and discusses the merits of these systems in comparison with other ‘clean-energy’ fuels. Through electrochemical methods, H2O2 fuel can be generated from environmentally benign energy sources such as wind and solar. It also produces only water and oxygen when it is utilised in a direct H2O2 fuel cell, making it a fully reversible system. The electrochemical methods for H2O2 production are discussed here as well as the recent research aimed at increasing the efficiency and power of direct H2O2 fuel cells.

Boosting one-step conversion of cyclohexane to adipic acid by NO2 and VPO composite catalysts

We demonstrate VPO composites as efficient catalysts for highly selective oxidation of cyclohexane to adipic acid with NO2. In particular, the Ni-Al-VPO composite catalyst exhibits the striking conversion of cyclohexane (60.6%) and exceptionally high selectivity towards adipic acid (85.0%). Moreover, N2O is an environmentally harmful gas, and its yield in the present process is only 0.03 t/t adipic acid, which is far below that obtained using the industrial method (0.3 t/t adipic acid). This work provides a new strategy for the one-step synthesis of dicarboxylic acids from cycloalkanes.

Polymeric ionic liquid nanogel-anchored tungstate anions: a robust catalytic system for oxidation of sulfides to sulfoxides

A new heterogeneous catalytic system was prepared by immobilization of tungstate ions on a cross-linked poly(ionic liquid) nanogel.

Continuous-flow synthesis of adipic acid from cyclohexene using hydrogen peroxide in high-temperature explosive regimes

Safe only in a microreactor! The synthesis of adipic acid from cyclohexene by tungstic acid-catalyzed oxidation using hydrogen peroxide following the classical Noyori protocol can be accomplished in good yields with residence times as short as 20 min at 140 °C using a safe and scalable microreactor environment. Under these intensified conditions the use of a phase-transfer catalyst is not required.

Oxidation-resistant acidic resins prepared by partial carbonization as cocatalysts in synthesis of adipic acid

The oxidation-resistant acidic resins are of great importance for the catalytic oxidation systems. In this paper, the oxidatively stable acidic resins are obtained from the cation ion exchange resins (CIERs) through the thermal treatment in N(2) atmosphere. The structure and properties of the thermally treated CIERs were characterized by chemical analysis, Fourier transform infrared (FT-IR) spectra, acid capacity measurement and scanning electron microscope (SEM). The thermally treated CIERs possess high acid capacity up to 4.09 mmol g(-1). A partial carbonization is observed in the thermal treatment process of CIERs, but the morphology of resin spheres maintains well. The as-prepared CIERs are used as solid acids to assist the hydrogen peroxide oxidation of cyclohexene to adipic acid (ADA) with tungstic acid as the catalyst precursor. The improved yields of ADA in the recycling reaction are obtained in the presence of acidic CIERs. Meanwhile, the unproductive decomposition of H(2)O(2) is effectively suppressed. The high yields of ADA (about 81%) are kept by the thermally treated CIERs even after the fifth cycle. The thermally treated CIERs exhibit excellent acid-catalytic performance and possess remarkable oxidation-resistant capability.