CO2 capture and MWCNTs synthesis using mesoporous silica and zeolite 13X collectively prepared from bottom ash

Coal fly ash and bottom ash low-cost feedstocks for CO2 reduction using the adsorption and catalysis processes

Combustion of fossil fuels, industry and agriculture sectors are considered as the largest emitters of carbon dioxide. In fact, the emission of CO2 greenhouse gas has been considerably intensified during the last two decades, resulting in global warming and inducing variety of adverse health effects on human and environment. Calling for effective and green feedstocks to remove CO2, low-cost materials such as coal ashes "wastes-to-materials", have been considered among the interesting candidates of CO2 capture technologies. On the other hand, several techniques employing coal ashes as inorganic supports (e.g., catalytic reduction, photocatalysis, gas conversion, ceramic filter, gas scrubbing, adsorption, etc.) have been widely applied to reduce CO2. These processes are among the most efficient solutions utilized by industrialists and scientists to produce clean energy from CO2 and limit its continuous emission into the atmosphere. Herein, we review the recent trends and advancements in the applications of coal ashes including coal fly ash and bottom ash as low-cost wastes to reduce CO2 concentration through adsorption and catalysis processes. The chemical routes of structural modification and characterization of coal ash-based feedstocks are discussed in details. The adsorption and catalytic performance of the coal ashes derivatives towards CO2 selective reduction to CH4 are also described. The main objective of this review is to highlight the excellent capacity of coal fly ash and bottom ash to capture and selective conversion of CO2 to methane, with the aim of minimizing coal ashes disposal and their storage costs. From a practical view of point, the needs of developing new advanced technologies and recycling strategies might be urgent in the near future to efficient make use of coal ashes as new cleaner materials for CO2 remediation purposes, which favourably affects the rate of global warming.

An Upper Bound Visualization of Design Trade-Offs in Adsorbent Materials for Gas Separations: CO2 , N2 , CH4 , H2 , O2 , Xe, Kr, and Ar Adsorbents

The last 20 years have seen many publications investigating porous solids for gas adsorption and separation. The abundance of adsorbent materials (this work identifies 1608 materials for CO₂ /N₂ separation alone) provides a challenge to obtaining a comprehensive view of the field, identifying leading design strategies, and selecting materials for process modeling. In 2021, the empirical bound visualization technique was applied, analogous to the Robeson upper bound from membrane science, to alkane/alkene adsorbents. These bound visualizations reveal that adsorbent materials are limited by design trade-offs between capacity, selectivity, and heat of adsorption. The current work applies the bound visualization to adsorbents for a wider range of gas pairs, including CO₂ , N₂ , CH₄ , H₂ , Xe, O₂ , and Kr. How this visual tool can identify leading materials and place new material discoveries in the context of the wider field is presented. The most promising current strategies for breaking design trade-offs are discussed, along with reproducibility of published adsorption literature, and the limitations of bound visualizations. It is hoped that this work inspires new materials that push the bounds of traditional trade-offs while also considering practical aspects critical to the use of materials on an industrial scale such as cost, stability, and sustainability.

Towards sustainable coal industry: Turning coal bottom ash into wealth

Although the world is gradually moving towards renewable energy resources, the coal industry will continue to be a major energy supply sector in the foreseeable future. However, by-products such as coal fly ash (CFA), coal bottom ash (CBA), and boiler slag are generated during coal combustion, and have become a significant environmental concern. There is an urgent need for transdisciplinary efforts in research, policy, and practice to reduce these by-products substantially. Many studies have focused on the environmental management and comprehensive utilization of CFA. As a comparison, less attention has been paid to CBA. Therefore, this critical review provides a holistic picture of CBA, from the generation, fundamental characteristics, environmental concerns to potential applications, and benefits analysis. Based on the fundamental characteristics, CBA can be considered as a sustainable and renewable resource with great potential to produce value-added materials. High-value applications and current research related to CBA, including construction and ceramic industry, wastewater remediation, soil amelioration, energy catalysis, valuable metals recovery, and material synthesis, are systemically presented and compared. It emphasizes the environmental and economic benefits of the sustainable applications of CBA as well. Particularly, it indicates that CBA is a promising candidate in normal, lightweight, self-compacting, and ultra-high-performance concrete, which shows a reduction in both energy consumption and greenhouse gas emissions during concrete production. This work provides new insights into the greener and sustainable applications of CBA, and it will offer a practical guide for the sustainable development of the coal industry.

Solid-Waste-Derived Carbon Dioxide-Capturing Materials

Solid sorbents are considered to be promising materials for carbon dioxide capture. In recent years, many studies have focused on the use of solid waste as carbon dioxide sorbents. The use of waste resources as carbon dioxide sorbents not only leads to the development of relatively low-cost materials, but also eliminates waste simultaneously. Different types of waste materials from biomass, industrial waste, household waste, and so forth were used as carbon dioxide sorbents with sufficient carbon dioxide capture capacities. Herein, progress on the development of carbon dioxide sorbents produced from waste materials is reviewed and covers key factors, such as the type of waste, preparation method, further modification method, carbon dioxide sorption performance, and kinetics studies. In addition, a new research direction for further study is proposed. It is hoped that this critical review will not merely sum up the major research directions in this field, but also provide significant suggestions for future work.

Adsorptive removal of methylene blue from aqueous solution using coal fly ash-derived mesoporous silica material

In the present work, coal fly ash-derived mesoporous silica material (CFA-MS) has been successfully fabricated without employing any extra silica source. The obtained CFA-MS was characterized by Fourier transform infrared spectroscopy, nitrogen adsorption–desorption measurement, powder X-ray diffraction and transmission electron microscopy. Nitrogen adsorption–desorption measurement disclosed that CFA-MS possesses Brunauer–Emmett–Teller-specific surface area of 497 m2·g−1 and pore volume of 0.49 cm3·g−1, respectively. Furthermore, CFA-MS was evaluated for the adsorptive removal of methylene blue from aqueous solution. Several influence parameters on the removal of methylene blue including contact time, pH, initial concentration and temperature were studied in detail. Moreover, Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models were employed for interpretation of the adsorption process, while the pseudo-first-order and pseudo-second-order kinetics equations were applied to investigate the adsorption kinetics. Results in the current work demonstrate that CFA-MS can be used as an efficient adsorbent for methylene blue removal.

Production of thermal insulation blocks from bottom ash of fluidized bed combustion system

The issues of disposal and environmental problems are increased by the generation of bottom ash from the thermal power plants day by day; hence, its recycling is required. The present study aimed to make thermal insulation blocks using as raw material bottom ash and iron ore slime as a binder and to characterize their engineering properties. Two different fineness values of bottom ash were considered with varying amounts of iron ore slime (0-10%) to make the blocks. Blocks were dried followed by firing at 1000, 1100 and 1200°C, respectively. Cold crushing strength, density and thermal conductivity of these fired blocks showed increasing behaviour with firing temperature, fineness of bottom ash and iron ore slime content. In contrast, a reverse trend was observed in the case of porosity. With increasing firing temperature, the formation of lower melting phases like iron silicate followed by iron aluminium silicate was observed, which imparts the strength inside the blocks. The coarser particles of bottom ash increase the interparticle spaces, which enhances the apparent porosity, resulting in higher thermal insulation property in the blocks. Blocks having better thermal insulation property could be possible to make effectively from coarse bottom ash by adding iron ore slime as a binder.

Mathematical modeling of gas desorption from a metal–organic supercontainer cavity filled with stored N2gas at critical limits

Gas escape rates from within the cavity of a MOSC were predicted by molecular dynamics and analytical equations.

Pretreated multiwalled carbon nanotube adsorbents with amine-grafting for removal of carbon dioxide in confined spaces

Three different methods, including thermal treatment, treatment with HNO₃ and O₂ oxidation, were used to pretreat multiwalled carbon nanotubes (MWCNTs) before grafting with N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AEAPS).

Synthesis of zeolite from multilayer food packing and sugar cane bagasse ash for CO2 adsorption

The X/A zeolite crystal mixtures were synthesized using sugar cane bagasse ash (SCBA) as a silicon source and multilayer food packing (MFP) as an aluminum source under hydrothermal conditions at 80 °C for 79–296 hours.