Alumina-grafted SBA-15 as a high performance support for Pd-catalysed cinnamyl alcohol selective oxidation

Synthesis of Nitronyl Nitroxide Radical-Modified Multi-Walled Carbon Nanotubes and Oxidative Desulfurization in Fuel

Novel and highly stable nitronyl nitroxide radical (NIT) derivatives were synthesized and coated on the surface of multi-walled carbon nanotubes (MWCNTs) to improve their desulfurization performance. They were characterized by FTIR, UV-vis, SEM, XRD, Raman spectroscopy and ESR. Thiophene in fuel was desulfurized by molecular O2, and the oxidation activity of these compounds was evaluated. At a normal temperature and pressure, the degradation rates of thiophene by four compounds in 4 h can reach 92.66%, 96.38%, 93.25% and 89.49%, respectively. The MWCNTs/NIT-F have a high special activity for the degradation of thiophene, and their desulfurization activity can be recycled for five times without a significant reduction. The mechanistic studies of MWCNTs/NIT composites show that the ammonium oxide ion is the key active intermediate in catalytic oxidative desulfurization, which provides a new choice for fuel oxidative desulfurization. The results show that NIT significantly improves the photocatalytic performance of MWCNTs.

Heterogenous Iron Oxide Assemblages for Use in Catalytic Ozonation: Reactivity, Kinetics, and Reaction Mechanism

Heterogeneous catalytic ozonation (HCO) has gained increasing attention as an effective process to remove refractory organic pollutants from industrial effluents. However, widespread application of HCO is still limited due to the typically low efficacy of catalysts used and matrix passivation effects. To this end, we prepared an Al2O3-supported Fe catalyst with high reactivity via a facile urea-based heterogeneous precipitation method. Due to the nonsintering nature of the preparation method, a heterogeneous catalytic layer comprised of γ-FeOOH and α-Fe2O3 is formed on the Al2O3 support (termed NS-Fe-Al2O3). On treatment of a real industrial effluent by HCO, the presence of NS-Fe-Al2O3 increased the removal of organics by ∼100% compared to that achieved with a control catalyst (i.e., α-Fe2O3/Al2O3 or γ-FeOOH/Al2O3) that was prepared by a conventional impregnation and calcination method. Furthermore, our results confirmed that the novel NS-Fe-Al2O3 catalyst demonstrated resistance to the inhibitory effect of high concentration of chloride and sulfate ions usually present in industrial effluent. A mathematical kinetic model was developed that adequately describes the mechanism of HCO process in the presence of NS-Fe-Al2O3. Overall, the results presented here provide valuable guidance for the synthesis of effective and robust catalysts that will facilitate the wider industrial application of HCO.

Cu(II) and Mn(II) Anchored on Functionalized Mesoporous Silica with Schiff Bases: Effects of Supports and Metal-Ligand Interactions on Catalytic Activity

New series of Cu(II) and Mn(II) complexes with Schiff base ligands derived from 2-furylmethylketone (Met), 2-furaldehyde (Fur), and 2-hydroxyacetopheneone (Hyd) have been synthesized in situ on SBA-15-NH₂, MCM-48-NH₂, and MCM-41-NH₂ functionalized supports. The hybrid materials were characterized by X-ray diffraction, nitrogen adsorption-desorption, SEM and TEM microscopy, TG analysis, and AAS, FTIR, EPR, and XPS spectroscopies. Catalytic performances were tested in oxidation with the hydrogen peroxide of cyclohexene and of different aromatic and aliphatic alcohols (benzyl alcohol, 2-methylpropan-1-ol, and 1-buten-3-ol). The catalytic activity was correlated with the type of mesoporous silica support, ligand, and metal-ligand interactions. The best catalytic activity of all tested hybrid materials was obtained in the oxidation of cyclohexene on SBA-15-NH₂-MetMn as a heterogeneous catalyst. No leaching was evidenced for Cu and Mn complexes, and the Cu catalysts were more stable due to a more covalent interaction of the metallic ions with the immobilized ligands.

Catalytic ozonation of hard COD in coking wastewater with Fe2O3/Al2O3-SiC: From catalyst design to industrial application

Development of robust, reactive, and inexpensive catalyst for pollutants abatement with catalytic ozonation is of great significance. Herein, the effect of a robust and easy-recovery catalyst, Fe₂O₃/Al₂O₃-SiC, for the catalytic ozonation of hardly biodegradable COD (hard COD) in coking wastewater had been explored. Al-O-Si bond formed on modified SiC through the substitution of hydrogen in surficial Si-OH groups by Al³⁺. The Lewis acid sites improved the adsorption of ozone and facilitated the formation of ·OH and O₂·^-. For coking wastewater treatment, the removal ratio of hard COD and the generation speed of hydroxyl radical (R_ct) in the catalytic ozonation process were 71% and 253% higher than those in the ozonation group, respectively. Ozone utilization increased from 0.44 g COD removed/g O₃ in the ozonation group to 1.42 g COD removed/g O₃ in the Fe₂O₃/Al₂O₃-SiC catalytic ozonation group. In a full-scale application, Fe₂O₃/Al₂O₃-SiC catalytic ozonation decreased the consumption of O₃ to 60 mg L^-1 and decreased the operation cost by 50%. These results provided an approachable way for sharing the extraordinary capacity of ozone for contaminants remediation in industrial applications.

Synthesis of Well-Ordered Mesoporous Aluminosilicates with High Aluminum Contents: The Challenge and the Promise

SBA-15 has recently emerged as a potential material for the catalytic conversion of large molecules. Usually, SBA-15 has a low content of aluminum due to the conventional acidic synthesis medium. Although a few approaches have been adopted to prepare Al-SBA-15 with a high alumina content, it is still challenging to prepare well-ordered Al-SBA-15 with a high alumina content. Here, we demonstrate a facile synthesis process in neutral mediums for the grafting of Al into the framework of SBA-15. This approach relies mainly on the dissociation of Si-O-Si bonds and the polymerization of Si-O-Si/Al bonds promoted by sodium persulfate (SPS) in neutral mediums. In this way, well-ordered Al-SBA-15 with a high aluminum content and enhanced acidity was obtained. Results of X-ray fluorescence spectroscopy (XRF) showed an n(SiO₂)/n(Al₂O₃) ratio of 13.7, much lower than that of the conventional sample (21.7) obtained in acidic medium. The characterization results indicated the presence of a well-ordered Al-containing mesophase with high hydrothermal stability. Notably, the Al content and the acidity of Al-SBA-15 can be tuned by changing the SPS amount.

Direct synthesis of dimethyl ether from CO2 hydrogenation over a highly active, selective and stable catalyst containing Cu–ZnO–Al2O3/Al–Zr(1 : 1)-SBA-15

A green and sustainable method to valorize CO2 into dimethyl ether on a very active and stable CZA/Al–Zr(1 : 1)-SBA-15 trifunctional catalyst.

Recent Advances in the Applications of Mesoporous Silica in Heterogenous Catalysis

Mesoporous silica is a class of silica material with a large specific surface area, high specific pore volume and meso-sized pores. These properties make mesoporous silica a good choice of...

Palladium-doped hierarchical ZSM-5 for catalytic selective oxidation of allylic and benzylic alcohols

Hierarchical zeolites have the potential to provide a breakthrough in transport limitation, which hinders pristine microporous zeolites and thus may broaden their range of applications. We have explored the use of Pd-doped hierarchical ZSM-5 zeolites for aerobic selective oxidation (selox) of cinnamyl alcohol and benzyl alcohol to their corresponding aldehydes. Hierarchical ZSM-5 with differing acidity (H-form and Na-form) were employed and compared with two microporous ZSM-5 equivalents. Characterization of the four catalysts by X-ray diffraction, nitrogen porosimetry, NH₃ temperature-programmed desorption, CO chemisorption, high-resolution scanning transmission electron microscopy, X-ray photoelectron spectroscopy and X-ray absorption spectroscopy allowed investigation of their porosity, acidity, as well as Pd active sites. The incorporation of complementary mesoporosity, within the hierarchical zeolites, enhances both active site dispersion and PdO active site generation. Likewise, alcohol conversion was also improved with the presence of secondary mesoporosity, while strong Brønsted acidity, present solely within the H-form systems, negatively impacted overall selectivity through undesirable self-etherification. Therefore, tuning support porosity and acidity alongside active site dispersion is paramount for optimal aldehyde production.

Short-channel mesoporous SBA-15 silica modified by aluminum grafting as a support for CoRu Fischer–Tropsch synthesis catalysts

Highly ordered short-channel mesoporous silica SBA-15 with large pores (11.2 nm) was synthesized from tetramethyl orthosilicate, using the block copolymer Pluronic PE-10400 as structure-directing agent, and triisopropylbenzene as a swelling agent.

Direct conversion of cellulose to ethyl levulinate catalysed by modified fibrous mesoporous silica nanospheres in a co-solvent system

A KCC-1/Al–SO₃H catalyst with Si/Al = 5 was prepared to directly catalyse the synthesis of ethyl levulinate from cellulose in an ethanol/toluene co-solvent system. A reaction yield of 28.8 mol% was achieved after 6 h at 200 °C.

Metal-Acid Synergy: Hydrodeoxygenation of Anisole over Pt/Al-SBA-15

Hydrodeoxygenation (HDO) is a promising technology to upgrade fast pyrolysis bio-oils but it requires active and selective catalysts. Here we explore the synergy between the metal and acid sites in the HDO of anisole, a model pyrolysis bio-oil compound, over mono- and bi-functional Pt/(Al)-SBA-15 catalysts. Ring hydrogenation of anisole to methoxycyclohexane occurs over metal sites and is structure sensitive; it is favored over small (4 nm) Pt nanoparticles, which confer a turnover frequency (TOF) of approximately 2000 h^-1 and a methoxycyclohexane selectivity of approximately 90 % at 200 °C and 20 bar H₂ ; in contrast, the formation of benzene and the desired cyclohexane product appears to be structure insensitive. The introduction of acidity to the SBA-15 support promotes the demethyoxylation of the methoxycyclohexane intermediate, which increases the selectivity to cyclohexane from 15 to 92 % and the cyclohexane productivity by two orders of magnitude (from 15 to 6500 mmol g_Pt ^-1  h^-1 ). Optimization of the metal-acid synergy confers an 865-fold increase in the cyclohexane production per gram of Pt and a 28-fold reduction in precious metal loading. These findings demonstrate that tuning the metal-acid synergy provides a strategy to direct complex catalytic reaction networks and minimize precious metal use in the production of bio-fuels.

Towards Mechanistic Understanding of Liquid-Phase Cinnamyl Alcohol Oxidation with tert-Butyl Hydroperoxide over Noble-Metal-Free LaCo1-x Fex O3 Perovskites

Noble-metal-free perovskite oxides are promising and well-known catalysts for high-temperature gas-phase oxidation reactions, but their application in selective oxidation reactions in the liquid phase has rarely been studied. We report the liquid-phase oxidation of cinnamyl alcohol over spray-flame synthesized LaCo_1-x Fe_x O₃ perovskite nanoparticles with tert-butyl hydroperoxide (TBHP) as the oxidizing agent under mild reaction conditions. The catalysts were characterized by XRD, BET, EDS and elemental analysis. LaCo_0.8 Fe_0.2 O₃ showed the best catalytic properties indicating a synergistic effect between cobalt and iron. The catalysts were found to be stable against metal leaching as proven by hot filtration, and the observed slight deactivation is presumably due to segregation as determined by EDS. Kinetic studies revealed an apparent activation energy of 63.6 kJ mol^-1 . Combining kinetic findings with TBHP decomposition as well as control experiments revealed a complex reaction network.

Alumina grafted SBA-15 sustainable bifunctional catalysts for direct cross-coupling of benzylic alcohols to diarylmethanes

AlSBA-15 catalysts possessing Brønsted acid and Lewis acid–base bifunctionalities catalyze the direct arylation of benzyl alcohols to diarylmethanes with an 85% product yield through C–O bond activation.

Shining light on the solid–liquid interface: in situ/operando monitoring of surface catalysis

Many industrially important chemical transformations occur at the interface between a solid catalyst and liquid reactants. In situ and operando spectroscopies offer unique insight into the reactivity of such catalytically active solid–liquid interfaces.

Solvent-Free Catalytic Oxidation of Benzyl Alcohol over Au-Pd Bimetal Deposited on TiO2: Comparison of Rutile, Brookite, and Anatase

TiO₂ (P25)-supported Au-Pd bimetal nanoparticles displayed excellent performance in the solvent-free benzyl alcohol catalytic oxidation. However, little research attention has been paid to investigate the effects of TiO₂ form on the catalytic activity of Au-Pd/TiO₂. In the present research, rutile, brookite, and anatase TiO₂ were successfully synthesized and subsequently applied as the carrier to load Au-Pd nanoparticles by the deposition-precipitation method. The experimental results indicated that the benzyl alcohol conversion employing the rutile TiO₂-supported Au-Pd catalyst is higher than the conversion of anatase and brookite TiO₂-loaded Au-Pd catalysts. However, the Au-Pd/TiO₂-rutile displayed the lowest and highest selectivity toward benzaldehyde and toluene, respectively. ICP-AES, XRD, XPS, and TEM were conducted to characterize these catalysts. The corresponding experimental results revealed that the excellent performance of Au-Pd/TiO₂-rutile catalyst was attributed to both the smaller Au-Pd nanoparticle size distribution and the higher concentrations of O_α and Pd²⁺ species on the catalyst surface. In the recycle experiments, the Au-Pd/TiO₂-rutile catalyst displayed lower reaction stability compared with the Au-Pd/TiO₂-anatase and Au-Pd/TiO₂-brookite, which might be due to the coverage of larger amount of aldehyde products on the surface.

The Effect of Carbon Nanofibers Surface Properties in Hydrogenation and Dehydrogenation Reactions

In this study, carbon nanofiber-supported Pd nanoparticles were used in the hydrogenation of cinnamaldehyde and in the dehydrogenation of cinnamyl alcohol. The different graphitisation of the surface of the nanofibers and the amount of oxygen functionalisation significantly affected both activity and selectivity to the various reaction products. In particular, a decrease in nanoparticle dimensions and oxygen content resulted in an increase in overall activity for both of the studied reactions. Moreover, the selectivity to hydrocinnamaldehyde enhanced with increasing surface oxygen content in the cinnamaldehyde hydrogenation, while the selectivity to cinnamaldehyde was higher with low-functionalised nanofibers in the cinnamyl alcohol dehydrogenation. Finally, the most active catalyst proved also to be stable in consecutive runs.

Heterogeneous Catalyzed Thermochemical Conversion of Lignin Model Compounds: An Overview

Thermochemical lignin conversion processes can be described as complex reaction networks involving not only de-polymerization and re-polymerization reactions, but also chemical transformations of the depolymerized mono-, di-, and oligomeric compounds. They typically result in a product mixture consisting of a gaseous, liquid (i.e., mono-, di-, and oligomeric products), and solid phase. Consequently, researchers have developed a common strategy to simplify this issue by replacing lignin with simpler, but still representative, lignin model compounds. This strategy is typically applied to the elucidation of reaction mechanisms and the exploration of novel lignin conversion approaches. In this review, we present a general overview of the latest advances in the principal thermochemical processes applied for the conversion of lignin model compounds using heterogeneous catalysts. This review focuses on the most representative lignin conversion methods, i.e., reductive, oxidative, pyrolytic, and hydrolytic processes. An additional subchapter on the reforming of pyrolysis oil model compounds has also been included. Special attention will be given to those research papers using "green" reactants (i.e., H₂ or renewable hydrogen donor molecules in reductive processes or air/O₂ in oxidative processes) and solvents, although less environmentally friendly chemicals will be also considered. Moreover, the scope of the review is limited to those most representative lignin model compounds and to those reaction products that are typically targeted in lignin valorization.

Slowing the Kinetics of Alumina Sol-Gel Chemistry for Controlled Catalyst Overcoating and Improved Catalyst Stability and Selectivity

Catalyst overcoating is an emerging approach to engineer surface functionalities on supported metal catalyst and improve catalyst selectivity and durability. Alumina deposition on high surface area material by sol-gel chemistry is traditionally difficult to control due to the fast hydrolysis kinetics of aluminum-alkoxide precursors. Here, sol-gel chemistry methods are adapted to slow down these kinetics and deposit nanometer-scale alumina overcoats. The alumina overcoats are comparable in conformality and thickness control to overcoats prepared by atomic layer deposition even on high surface area substrates. The strategy relies on regulating the hydrolysis/condensation kinetics of Al(^s BuO)₃ by either adding a chelating agent or using nonhydrolytic sol-gel chemistry. These two approaches produce overcoats with similar chemical properties but distinct physical textures. With chelation chemistry, a mild method compatible with supported base metal catalysts, a conformal yet porous overcoat leads to a highly sintering-resistant Cu catalyst for liquid-phase furfural hydrogenation. With the nonhydrolytic sol-gel route, a denser Al₂ O₃ overcoat can be deposited to create a high density of Lewis acid-metal interface sites over Pt on mesoporous silica. The resulting material has a substantially increased hydrodeoxygenation activity for the conversion of lignin-derived 4-propylguaiacol into propylcyclohexane with up to 87% selectivity.

Tunable Silver-Functionalized Porous Frameworks for Antibacterial Applications

Healthcare-associated infections and the rise of drug-resistant bacteria pose significant challenges to existing antibiotic therapies. Silver nanocomposites are a promising solution to the current crisis, however their therapeutic application requires improved understanding of underpinning structure-function relationships. A family of chemically and structurally modified mesoporous SBA-15 silicas were synthesized as porous host matrices to tune the physicochemical properties of silver nanoparticles. Physicochemical characterization by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray absorption near-edge spectroscopy (XANES) and porosimetry demonstrate that functionalization by a titania monolayer and the incorporation of macroporosity both increase silver nanoparticle dispersion throughout the silica matrix, thereby promoting Ag₂CO₃ formation and the release of ionic silver in simulated tissue fluid. The Ag₂CO₃ concentration within functionalized porous architectures is a strong predictor for antibacterial efficacy against a broad spectrum of pathogens, including C. difficile and methicillin-resistant Staphylococcus aureus (MRSA).

Catalysis in flow: O2 effect on the catalytic activity of Ru(OH)x/γ-Al2O3 during the aerobic oxidation of an alcohol

Different roles of O₂ in the Ru-catalysed aerobic oxidation of alcohols have been delineated.

Hierarchical mesoporous Pd/ZSM-5 for the selective catalytic hydrodeoxygenation of m-cresol to methylcyclohexane

Mesopore incorporation into ZSM-5 enhances the dispersion of Pd nanoparticles significantly accelerating m-cresol conversion relative to a conventional microporous ZSM-5, and dramatically increasing selectivity towards the desired methylcyclohexane deoxygenated product.

Oxidation of cinnamyl alcohol using bimetallic Au–Pd/TiO2 catalysts: a deactivation study in a continuous flow packed bed microreactor

Deactivation of Au–Pd/TiO₂ catalyst during oxidation in flow is attributed to Pd leaching and a complex effect of oxygen.

Mechanism of catalytic ozonation in Fe ₂O₃/Al ₂O₃@SBA-15 aqueous suspension for destruction of ibuprofen

Fe2O3 and/or Al2O3 were supported on mesoporous SBA-15 by wet impregnation and calcinations with AlCl3 and FeCl3 as the metal precursor and were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectra (FTIR) of adsorbed pyridine. Fe2O3/Al2O3@SBA-15 was found to be highly effective for the mineralization of ibuprofen aqueous solution with ozone. The characterization studies showed that Al-O-Si was formed by the substitution of Al(3+) for the hydrogen of surface Si-OH groups, not only resulting in high dispersion of Al2O3 and Fe2O3 on SBA-15, but also inducing the greatest amount of surface Lewis acid sites. By studies of in situ attenuated total reflection FTIR (ATR-FTIR), in situ Raman, and electron spin resonance (ESR) spectra, the chemisorbed ozone was decomposed into surface atomic oxygen species at the Lewis acid sites of Al(3+) while it was converted into surface adsorbed (•)OHads and O2(•-) radicals at the Lewis acid sites of Fe(3+). The combination of both Lewis acid sites of iron and aluminum onto Fe2O3/Al2O3@SBA-15 enhanced the formation of (•)OHads and O2(•-) radicals, leading to highest reactivity. Mechanisms of catalytic ozonation were proposed for the tested catalysts on the basis of all the experimental information.

Selective Palladium-Catalysed Aerobic Oxidation of Alcohols

Palladium has a significant track record as a catalyst for a range of oxidation reactions and it has been explored for the selective oxidation of alcohols for many years. This chapter focuses on the two main types of aerobic Pd catalysts: heterogeneous and ligand-modulated systems. In the case of heterogeneous systems, the mechanistic understanding of these systems and the use of in situ and operando techniques to obtain this knowledge are discussed. The current state-of-the-art is also summarized in terms of catalytic performance and substrate scope for heterogeneous Pd-based catalysts. In terms of ligand-modulated systems, leading examples of molecular Pd(ii) catalysts which undergo direct O2 coupled turnover are highlighted. The catalyst performance for such catalysts is exemplified and mechanistic understanding for these molecular systems is discussed.

Heterogeneous Pd catalysts supported on silica matrices

Features, advantages and limitations associated with palladium catalysts deposited over various siliceous supports in different types of practically useful organic transformations are reviewed.