Catalytic ozonation of 4-nitrophenol over an mesoporous α-MnO2 with resistance to leaching

Composite material derived from ZIF-67 and biochar promotes ozonation of 4-nitrophenol

Cobalt 2-methylimidazole (ZIF-67) have abundant nitrogen and cobalt elements, which can be used as an excellent precursor for catalyst synthesis. In this study, a new Co, N co-doped carbon-based catalyst (Co-N-BC) was synthesized from ZIF-67 and biochar, which can significantly improve the degradation of 4-nitrophenol (4-NP) in catalytic ozonation. The mineralization rate of 4-NP achieves 65.8% within 60 min. The catalyst showed high recycling stability in the four cycles of reuse experiment. Different operating parameters, such as solution pH, the concentration of O3 and 4-NP, have been studied in the Co-N-BC catalytic ozonation. O3, O2-· and ·OH are determined as the main reactive species for 4-NP degradation, and ·OH is especially responsibly for 4-NP mineralization. The existence of inorganic ions, such as Cl-, NO2-, CO32- and PO43-, all significantly inhibited the degradation of 4-NP to different extend, respectively. The effect of substituent on a series of organics with similar structure of 4-NP was also investigated in Co-N-BC catalytic ozonation. This study provides a new composite material for heterogeneous catalytic ozonation, which is very promising in 4-NP contained complex wastewater treatment.

MnO2 nanoparticles decorated with Ag/Au nanotags for label-based SERS determination of cellular glutathione

A novel stimulus-responsive surface-enhanced Raman scattering (SERS) nanoprobe has been developed for sensitive glutathione (GSH) detection based on manganese dioxide (MnO₂) core and silver/gold nanoparticles (Ag/Au NPs). The MnO₂ core is not only capable to act as a scaffold to amplify the SERS signal via producing "hot spots", but also can be degraded in the presence of the target and thus greatly enhance the nanoprobe sensitivity for sensing of GSH. This approach enables a wide linear range from 1 to 100 µM with a 2.95 µM (3σ/m) detection limit. Moreover, the developed SERS nanoprobe represents great possibility in both sensitive detection of intracellular GSH and even can monitor the change of intracellular GSH level when the stimulant occurs. This sensing system not merely offers a novel strategy for sensitive sensing of GSH, but also provides a new avenue for other biomolecules detection.

State of Art and Perspectives in Catalytic Ozonation for Removal of Organic Pollutants in Water: Influence of Process and Operational Parameters

The number of organic pollutants detected in water and wastewater is continuously increasing thus causing additional concerns about their impact on public and environmental health. Therefore, catalytic processes have gained interest as they can produce radicals able to degrade recalcitrant micropollutants. Specifically, catalytic ozonation has received considerable attention due to its ability to achieve advanced treatment performances at reduced ozone doses. This study surveys and summarizes the application of catalytic ozonation in water and wastewater treatment, paying attention to both homogeneous and heterogeneous catalysts. This review integrates bibliometric analysis using VOS viewer with systematic paper reviews, to obtain detailed summary tables where process and operational parameters relevant to catalytic ozonation are reported. New insights emerging from heterogeneous and homogenous catalytic ozonation applied to water and wastewater treatment for the removal of organic pollutants in water have emerged and are discussed in this paper. Finally, the activities of a variety of heterogeneous catalysts have been assessed using their chemical–physical parameters such as point of zero charge (PZC), pKa, and pH, which can determine the effect of the catalysts (positive or negative) on catalytic ozonation processes.

A pilot lab trial for enhanced oxidative transformation of procymidone fungicide and its aniline metabolite using heterogeneous MnO2 catalysts

In this study, the feasibility of two heterogeneous catalysis (non-Fenton heterogeneous catalysis and catalytic ozonation) was evaluated for the oxidative transformation of the fungicide procymidone and its major metabolite (3,5-dichloroaniline; 3,5-DCA) under a pilot lab experiment. Among the studied treatments, only H₂O₂ or O₃ significantly oxidized procymidone and 3,5-DCA. However, heterogeneous catalysis used with various types of MnO₂ catalysts was found to be an effective rapid strategy for transformation of procymidone and its aniline metabolite. Among the studied catalysts, δ-MnO₂ performed well in the enhanced oxidative transformation of procymidone and 3,5-DCA in MnO₂-mediator system assay. The optimal reaction parameters, such as reaction pH, and initial catalyst concentration were comparatively evaluated. However, heterogeneous catalysis and catalytic ozonation were revealed as the rapid strategy for oxidative transformation of investigated procymidone and 3,5-DCA as compared to single oxidation by peroxide/ozone. Finally, as a novel insight of this investigation, a postulated reaction mechanism underlying the accelerated transformation of aniline metabolites via heterogeneous catalysis was explored. The findings of this study will open new avenues for evaluating heterogeneous catalysis during oxidative transformation of non-phenolic pollutants in both lab trial and field applications. This study can be expanded for use in actual field settings, using environmental samples from contaminated areas exposed to non-phenolic pesticides and their metabolites.

Heterogeneous Catalytic Ozonation: Solution pH and Initial Concentration of Pollutants as Two Important Factors for the Removal of Micropollutants from Water

There are several publications on heterogeneous catalytic ozonation; however, their conclusions and the comparisons between them are not always consistent due to the variety of applied experimental conditions and the different solid materials used as catalysts. This review attempts to limit the major influencing factors in order to reach more vigorous conclusions. Particularly, it highlights two specific factors/parameters as the most important for the evaluation and comparison of heterogeneous catalytic ozonation processes, i.e., (1) the pH value of the solution and (2) the initial concentration of the (micro-)pollutants. Based on these, the role of Point of Zero Charge (PZC), which concerns the respective solid materials/catalysts in the decomposition of ozone towards the production of oxidative radicals, is highlighted. The discussed observations indicate that for the pH range 6–8 and when the initial organic pollutants’ concentrations are around 1 mg/L (or even lower, i.e., micropollutant), then heterogeneous catalytic ozonation follows a radical mechanism, whereas the applied solid materials show their highest catalytic activity under their neutral charge. Furthermore, carbons are considered as a rather controversial group of catalysts for this process due to their possible instability under intense ozone oxidizing conditions.

Degradation of o-, m-, p-cresol isomers using ozone in the presence of V2O5-supported Mn, Fe, and Ni catalysts

Oxidative degradation of o-, m- and p-cresols using ozone in the presence of V2O5-supported metal (Mn, Fe, Ni) catalysts was studied under ambient reaction conditions. Metal (Mn, Fe, Ni) loaded V2O5 catalysts were prepared using a wet-impregnation method, thereafter, characterized, and analyzed by use of the XRD, FT-IR, SEM-EDX, TEM, and ICP-OES. Results show the effect of the amount of a metal that was loaded on the support, particularly, how it affects the resultant catalysts’ (i) crystallite size, (ii) dispersion of an active metal over the surface of a support, and (iii) catalytic activity. Mn-loaded catalysts were found to be relatively more active for the conversion of individual cresol isomers and the activity of this catalyst was significantly enhanced at a lower Mn to V2O5 ratio (2.5 wt%). Mn(2.5 %)/V2O5 catalyst led to conversions of 66.78, 71.01 and 73.68 % with o-, m-, and p-cresols respectively within 24 h of oxidation. Oxidation products were derivatized by ethanol and a few were positively detected using GC-MS. o-Tolyl acetate and 2,5-dihydroxy toluene were detected from o-cresol, m-tolyl acetate, and 2,3-dihydroxy toluene from m-cresol and p-tolyl acetate and 3,4-dihydroxy toluene from p-cresol oxidation. Dimethyl maleate and dimethyl oxalate were detected as common products in all three isomers’ oxidation.

Advanced catalytic ozonation for degradation of pharmaceutical pollutants-A review

Various chemical treatment techniques are involved in removing refractory organic compounds from water and wastewater using the oxidation reaction of hydroxyl radicals (^•OH). The use of catalysts in advanced catalytic ozonation is likely to improve the decomposition of molecular ozone to generate highly active free radicals that facilitate the rapid and efficient mineralization and degradation of numerous organics. For the degradation of toxic organic pollutants in wastewater, the advanced catalytic ozonation process has been widely applied in recent years. Low utilization efficiency of ozone and ineffective mineralization of organic contaminants by ozone can be remedied with advanced catalytic ozonation. Advanced catalytic ozonation has gained popularity because of these merits. However, homogeneous catalytic ozonation has the disadvantage of producing secondary contaminants from the addition of metallic ions. Heterogeneous catalytic ozonation can overcome this drawback by utilizing metals, metallic oxides, and carbon materials as a catalyst of efficacy and stability. This review discusses various aspects of catalytic ozonation in wastewater treatment of pharmaceutical pollutants, application of catalytic ozonation process in typical wastewater, and prospects in advancing the techniques in heterogeneous catalytic ozonation.

Facile synthesis of silver nanocatalyst decorated Fe3O4@PDA core–shell nanoparticles with enhanced catalytic properties and selectivity

In this work, we have successfully prepared core–shell nanoparticles (Fe₃O₄@PDA) wrapped with Ag using a simple and green synthesis method. Without an external reducing agent, silver nanoparticles (Ag NPs) with good dispersibility were directly reduced and deposited on a polydopamine (PDA) layer. Fe₃O₄@PDA@Ag showed excellent catalytic activity and recyclability for 4-nitrophenol, and also exhibited good catalytic selectivity for organic dyes (MO and MB). This simple and green synthesis method will provide a platform for other catalytic applications.

In this work, we have successfully prepared core–shell nanoparticles (Fe₃O₄@PDA) wrapped with Ag using a simple and green synthesis method.

Thrombus-targeted nanoparticles for thrombin-triggered thrombolysis and local inflammatory microenvironment regulation

Thrombus related diseases seriously threaten human's health and life. The drawbacks of thrombolytic drugs, such as poor targeting ability and unexpected bleeding complications limit their clinical application. Thus, targeted delivery and controlled release of drugs at local thrombus sites to achieve efficient thrombolysis is an urgent event to be resolved. Herein, we developed an intelligent system MnO₂/uPA@pep-Fuco for precise thrombolysis and thrombus inflammatory microenvironment remodeling. MnO₂/uPA@pep-Fuco exhibited an excellent thrombus targeting ability via the high affinity of fucoidan (Fuco) for P-selectin overexpressed by activated platelets. And then pep-Fuco modified onto the surface of mesopore could be removed to release urokinase (uPA) locally under the high level of thrombin microenvironment in thrombus site. Meanwhile, due to the catalase-like activity of MnO₂ nanoplatform, MnO₂/uPA@pep-Fuco could regulate the inflammatory thrombus microenvironment by eliminating hydrogen peroxide (H₂O₂), so as to achieve a collaborative thrombolysis therapy. In ferric chloride (FeCl₃)-induced carotid thrombus models, MnO₂/uPA@pep-Fuco specifically targeted to the obstructive artery (3.43 times that of the normal artery) and significantly decreased the percentage of thrombus closure (5.99 ± 5.07%), demonstrating the superior thrombolysis ability. In addition, the significantly reduced tail bleeding time suggested MnO₂/uPA@pep-Fuco might possess a low risk of bleeding complications.

Towards a comparison between the hybrid ozonation-coagulation (HOC) process using Al- and Fe-based coagulants: Performance and mechanism

In this study, the removal performance of a hybrid ozonation-coagulation (HOC) process using AlCl₃6H₂O (Al-HOC) and FeCl₃6H₂O (Fe-HOC) as coagulants for the treatment of wastewater treatment plant (WWTP) effluent and ibuprofen (IBP) was investigated. Compared with the conventional coagulation process and pre-ozonation-coagulation process, much better organic matter removal performance can be achieved for both the Al-HOC and Fe-HOC processes. The Fe-HOC process showed an obviously higher dissolved organic carbon (DOC) removal efficiency than that of the Al-HOC process. Surface hydroxyl groups were determined to be the active sites in generating OH in the HOC process, and the hydrolysed Fe species possessed a higher content of surface hydroxyl groups than the hydrolysed Al species according to fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectra (XPS) analyses. In addition, the hydrolysed Fe species contained a higher portion of tetrahedral sites that were more likely to be stronger Lewis acid sites to react with ozone to generate OH. Furthermore, peroxone reactions in the HOC process were other possible way to enhance the OH generation, and higher H₂O₂ generation was observed in the Fe-HOC process due to higher O₂^- generation. Therefore, better removal performance of the Fe-HOC process can be obtained due to the increased OH generation in the Fe-HOC process.

Scale-Up of Cluster Beam Deposition to the Gram Scale with the Matrix Assembly Cluster Source for Heterogeneous Catalysis (Catalytic Ozonation of Nitrophenol in Aqueous Solution)

The deposition of precisely controlled clusters from the beam onto suitable supports represents a novel method to prepare advanced cluster-based catalysts. In principle, cluster size, composition, and morphology can be tuned or selected prior to deposition. The newly invented matrix assembly cluster source (MACS) offers one solution to the long-standing problem of low cluster deposition rate. Demonstrations of the cluster activities under realistic reaction conditions are now needed. We deposited elemental silver (Ag) and gold (Au) clusters onto gram-scale powders of commercial titanium dioxide (TiO₂) to investigate the catalytic oxidation of nitrophenol (a representative pollutant in water) by ozone in aqueous solution, as relevant to the removal of waste drugs from the water supply. A range of techniques, including scanning transmission electron microscopy (STEM), Brunauer-Emmett-Teller (BET) surface area test, and X-ray photoelectron spectroscopy (XPS), were employed to reveal the catalyst size, morphology, surface area, and oxidation state. Both the Ag and Au cluster catalysts proved active for the nitrophenol ozonation. The cluster catalysts showed activities at least comparable to those of catalysts made by traditional chemical methods in the literature, demonstrating the potential applications of the cluster beam deposition method for practical heterogeneous catalysis in solution.

Reactive Oxygen Species and Catalytic Active Sites in Heterogeneous Catalytic Ozonation for Water Purification

Heterogeneous catalytic ozonation (HCO) processes have been widely studied for water purification. The reaction mechanisms of these processes are very complicated because of the simultaneous involvement of gas, solid, and liquid phases. Although typical reaction mechanisms have been established for HCO, some of them are only appropriate for specific systems. The divergence and deficiency in mechanisms hinders the development of novel active catalysts. This critical review compares the various existing mechanisms and categorizes the catalytic oxidation of HCO into radical-based oxidation and nonradical oxidation processes with an in-depth discussion. The catalytic active sites and adsorption behaviors of O₃ molecules on the catalyst surface are regarded as the key clues for further elucidating the O₃ activation processes, evolution of reactive oxygen species (ROS) or organic oxidation pathways. Moreover, the detection methods of the ROS produced in both types of oxidations and their roles in the destruction of organics are reviewed with discussion of some specific problems among them, including the scavengers selection, experiment results analysis as well as some questionable conclusions. Finally, alternative strategies for the systematic investigation of the HCO mechanism and the prospects for future studies are envisaged.

Treatment of aqueous solutions of 1,4-dioxane by ozonation and catalytic ozonation with copper oxide (CuO)

In this study, treatment for the removal of 1,4-dioxane by ozone and by catalytic ozonation using CuO as the catalyst was investigated. While the removal of 1,4-dioxane was small (20%) and mineralization negligible after 6 h of ozonation treatment, the removals of 1,4-dioxane and total organic carbon increased by factors of 10.35 and 81.25, respectively, after catalytic ozonation in the presence of CuO. The mineralization during catalytic ozonation was favoured at pH 10 (94.91 min^-1), although it proceeded even at pH 3 (54.41 min^-1). The CuO catalyst decreased the equilibrium concentration of soluble ozone and favoured its decomposition to reactive oxidative species. Radical scavenging experiments demonstrated that superoxide radicals were the main species responsible for the degradation of 1,4-dioxane. Further scavenging experiments with phosphate confirmed the presence of Lewis active sites on the surface of CuO, which were responsible for the adsorption and decomposition of ozone. The reaction mechanism proceeded through the formation of ethylene glycol diformate, which quickly hydrolyzed to ethylene glycol and formic acid as intermediate products. The stability of CuO indicated weak copper leaching and high catalytic activity for five recycling cycles. The toxicity of the water, assessed by Vibrio fischeri bioluminescence assays, remained the same (low toxicity) after catalytic ozonation while it increased after treatment with ozonation alone.

Catalytic ozonation for water and wastewater treatment: Recent advances and perspective

Ozonation process has been widely applied in water and wastewater treatment, such as for disinfection, for degradation of toxic organic pollutants. However, the utilization efficiency of ozone is low and the mineralization of organic pollutants by ozone oxidation is ineffective, and some toxic disinfection byproducts (DBPs) may be formed during ozonation process. Catalytic ozonation process can overcome these problems to some extent, which has received increasing attention in recent years. During catalytic ozonation, catalysts can promote O₃ decomposition and generate active free radicals, which can enhance the degradation and mineralization of organic pollutants. In this paper, the history of ozonation application in water treatment was briefly reviewed. The properties of the ozone molecule, the ozonation types and several ozone-based water treatment processes were briefly introduced. Various catalysts for catalytic ozonation, including homogeneous and heterogeneous catalysts, such as metal ions, metal oxidizes, carbon-based materials and their possible catalytic mechanisms were analyzed and summarized in detail. Furthermore, some inconsistent results of previous research on catalytic ozonation were analyzed and discussed. The application of catalytic oxidation for the degradation of toxic organic pollutants, including phenols, pesticides, dyes, pharmaceuticals and others, was summarized. Finally, several key aspects of catalytic ozonation, such as pH effect, the catalyst performance, the catalytic mechanism were proposed, to which more attention should be paid in future study.

Adsorption driven formate reforming into hydride and tandem hydrogenation of nitrophenol to amine over PdOx catalysts

Due to their high toxicity and non-biodegradability, efficient reduction of nitroarenes to amines is of great practical importance, yet it still remains a significant challenge.

Aptamer/photosensitizer hybridized mesoporous MnO2 based tumor cell activated ROS regulator for precise photodynamic therapy of breast cancer

Herein, we report a turn-on strategy for selectively killing the tumor cell via combining the singlet-oxygen quenching MnO₂ and tumor cell-targeting aptamer. The photosensitizers were in the quenching state when loaded in the mesoporous MnO₂ (mMnO₂) nanoparticles and sealed by the aptamer on the particle surface. The aptamer can selectively recognize the specific membrane protein on the tumor cell and release the photosensitizers, activating the photosensitizer and killing the tumor cells. The specific binding-induced "off-on" switching of singlet oxygen generation reduced the damage to the nearby healthy cells to a large extent. The high loading ability for photosensitizer and the GSH consumption property of mMnO₂ endow the system with high local concentration of singlet-oxygen for killing the target tumor cell. The high selectivity and efficiency of the constructed singlet oxygen regulating system will pave a new way for utilizing PDT in cancer precise treatment.

Synthesis of Petal-Like MnO2 Nanosheets on Hollow Fe3O4 Nanospheres for Heterogeneous Photocatalysis of Biotreated Papermaking Effluent

Owing to the implementation of increasingly stringent water conservation policies and regulations, the pulp and paper mill industry must make increased efforts to meet the limits for pollutant emissions. The primary pretreatment and secondary biochemical treatment methods used currently generally fail to meet the country-specific environmental regulations, and the wastewater must be processed further even after being subjected to secondary biochemical treatments. In this work, we synthesized Fe₃O₄/MnO₂ nanocomposites (FMNs) with a flower-like structure for use in the heterogeneous photocatalytic treatment of biotreated papermaking wastewater. FMNs1.25, which were formed using a KMnO₄/Fe₃O₄ molar ratio of 1.25, could be separated readily using an external magnetic field and exhibited higher photocatalytic activity than those of the other samples as well as MnO₂ and Fe₃O₄. The effects of various experimental parameters on the photocatalytic activity of FMNs1.25, including the initial pH of the wastewater and the catalyst dosage, were determined. The common chemical oxygen demand (COD_Cr) reduction rate in the case of this sample reached 56.58% within 120 min at a pH of 3, the COD_Cr of effluent after treatment was 52.10 mg/L. Further, even under neutral conditions, the COD_Cr of the treated effluent was below the current limit for discharge in China. Moreover, the nanocomposites exhibited good recyclability, and their catalytic activity did not decrease significantly even after five usage cycles. This study should serve as a platform for the fabrication of effective photocatalysts for the advanced treatment of biotreated papermaking effluent and refractory organic wastewater.

Application of Heterogeneous Catalytic Ozonation for Refractory Organics in Wastewater

Catalytic ozonation is believed to belong to advanced oxidation processes (AOPs). Over the past decades, heterogeneous catalytic ozonation has received remarkable attention as an effective process for the degradation of refractory organics in wastewater, which can overcome some disadvantages of ozonation alone. Metal oxides, metals, and metal oxides supported on oxides, minerals modified with metals, and carbon materials are widely used as catalysts in heterogeneous catalytic ozonation processes due to their excellent catalytic ability. An understanding of the application can provide theoretical support for selecting suitable catalysts aimed at different kinds of wastewater to obtain higher pollutant removal efficiency. Therefore, the main objective of this review article is to provide a summary of the accomplishments concerning catalytic ozonation to point to the major directions for choosing the catalysts in catalytic ozonation in the future.

The role of ozone and influence of band structure in WO3 photocatalysis and ozone integrated process for pharmaceutical wastewater treatment

Photocatalytic ozonation has great potential in wastewater treatment. However, the role of ozone and the contribution of photogenerated hole in this process have not been fully understood. Here three WO₃ materials are synthesized and used as model catalysts in visible-light photocatalytic ozonation for the mineralization of pharmaceutical pollutants. A dual role of ozone in this process has been confirmed: (i) direct oxidation of the pollutant till formation of refractory intermediates, (ii) efficient trapping of photoelectron that cannot be captured by O₂. The latter is crucial because it not only induces the O₃^--mediated pathway for hydroxyl radical (OH) formation but also separates the hole which has proven to be capable of oxidizing water into OH. Evidenced by photoluminescence results, the intrinsic charge separation ability of WO₃ in photocatalytic ozonation is no more as important as that in photocatalysis with O₂. Finally, this process is more applicable under acidic condition. This work contributes to a better understanding of the significance of ozone in WO₃ photocatalytic ozonation and provides us an insight into the mechanism of photocatalytic ozonation.

Synthesis of petal-like δ-MnO2 and its catalytic ozonation performance

Petal-like δ-MnO₂ microspheres were successfully synthesized by a very simple hydrothermal method with potassium permanganate (KMnO₄) as the only raw material.

Synergistic Effects of Gold-Palladium Nanoalloys and Reducible Supports on the Catalytic Reduction of 4-Nitrophenol

Herein we report on the catalytic activity of mesoporous nickel, iron, cerium, cobalt, and manganese oxides prepared using KIT-6 as a hard template via evaporation-assisted precipitation. The mesoporous metal oxides (MMOs) were characterized and used as heterogeneous catalysts in the reduction of 4-nitrophenol (4-Nip) by sodium borohydride (BH₄^-). Furthermore, polyamidoamide (PAMAM) dendrimers were used to synthesize gold-palladium nanoalloy particles. The size of AuPd/PAMAM was found to be 3.5 ± 0.8 nm in diameter before being immobilized on the aforementioned mesoporous metal oxides and used as catalysts in the reduction of 4-Nip. Prior to catalytic evaluation, the reduction profiles of the mesoporous metal oxides were investigated by hydrogen-temperature-programmed reduction (H₂-TPR) and showed that mesoporous metal oxides can be easily reduced at lower temperatures and that the immobilization of gold-palladium nanoalloy particles lowers their reduction temperatures. Mesoporous cobalt and manganese oxides showed catalytic activity toward 4-Nip reduction, and the activity was enhanced after immobilization of the gold-palladium nanoalloys. Isolation of nanoparticles activity was achieved by immobilization of the gold-palladium nanoalloys on the inert silica support. From this we postulated an electron relay mechanism for the reduction of 4-nitrophenol. With the use of power rate law we showed that 4-Nip reduction follows pseudo-first-order kinetics.

Selection of active phase of MnO2 for catalytic ozonation of 4-nitrophenol

Catalytic ozonation is a highly effective method in wastewater treatment, and MnO₂ materials are widely recognized as active heterogeneous catalysts in this process. Many works reported the progress in active MnO₂ synthesis, but the active phase is rarely systematically studied. In this paper, all six phases of MnO₂ (α-, β-, δ-, γ-, λ- and ε-) were synthesized by facile methods. Their catalytic activities in ozonation of 4-nitrophenol (4-NP) were evaluated and correlated with the physicochemical properties obtained from X-ray Diffraction (XRD), transmission electron microscopy (TEM), physical adsorption and cyclic voltammetry (CV) analysis. α- MnO₂ was found to be the most active catalyst in 4-NP degradation at neutral pH. MnO₂ with low average oxidation state (AOS) showed stronger oxidation/reduction peaks in CV characterization, which benefited catalytic decomposition of ozone to generate active species. Superoxide radical was confirmed as the main oxidizing species, along with singlet oxygen and ozone molecule oxidation in bulk solution and little contribution of oxidation on the MnO₂ surface. Mn²⁺ leaching happened during catalytic ozonation, but its catalytic role is negligible. This result may give rise to the preparation of new active MnO₂ catalysts.

Synthesis of manganese incorporated hierarchical mesoporous silica nanosphere with fibrous morphology by facile one-pot approach for efficient catalytic ozonation

Manganese incorporated fibrous silica nanosphere (MnOx-0.013/KCC-1) was synthesized by one step hydrothermal method for the first time and its catalytic activity for ozonation of oxalic acid was studied. For comparison, manganese loaded MCM-41 (MnOx-0.013/MCM-41) was prepared by impregnation method. Various characterizations showed that the morphological, structural and textural properties of MnOx-0.013/KCC-1 were well preserved. Ozonation and catalytic ozonation by MnOx-0.013/KCC-1 and MnOx-0.013/MCM-41 led to 4, 85 and 60% reduction in TOC respectively. Furthermore, 0.05 and 1.2mgL(-1) leaching of Mn was detected from MnOx-0.013/KCC-1 and MnOx-0.013/MCM-41, which are approximately 2.0 and 42.0% of the total Mn present in MnOx-0.013/KCC-1 and MnOx-0.013/MCM-41 respectively. The high catalytic activity was attributed to the generation of hydroxyl radical. Surface hydroxyl groups investigated by using phosphates and ATR-FTIR were believed to be the active sites. Our proposed method of synthesis can be generalized for the synthesis of other metal oxides incorporated fibrous silica for environmental catalysis and other catalytic reactions.

Insights into the mechanism of phenolic mixture degradation by catalytic ozonation with a mesoporous Fe3O4/MnO2 composite

Mesoporous Fe₃O₄/MnO₂ is more active than Fe₃O₄ and MnO₂ in catalytic ozonation of phenols mixtures, and it is easily magnetically separated and very stable in recycling at pH 9.