Conversion of Y into SSZ-13 zeolite in the presence of tetraethylammonium hydroxide and ethylene-to-propylene reactions over SSZ-13 zeolites

Chabazite Synthesis and Its Exchange with Ti, Zn, Cu, Ag and Au for Efficient Photocatalytic Degradation of Methylene Blue Dye

A chabazite-type zeolite was prepared by the hydrothermal method. Before ion exchange, the chabazite was activated with ammonium chloride (NH₄Cl). The ion exchange process was carried out at a controlled temperature and constant stirring to obtain ion-exchanged chabazites of Ti⁴⁺ chabazite (TiCHA), Zn²⁺ chabazite (ZnCHA), Cu²⁺ chabazite (CuCHA), Ag⁺ chabazite (AgCHA) and Au³⁺ chabazite (AuCHA). Modified chabazite samples were characterized by X-ray diffraction (XRD), scanning electron microscope equipped with energy-dispersive spectroscopy (SEM-EDS), transmission electron microscopy (TEM), Fourier transform infrared (FTIR), N₂ adsorption methods and UV–visible diffuse reflectance spectroscopy (DRS). XRD results revealed that the chabazite structure did not undergo any modification during the exchange treatments. The photocatalytic activity of chabazite samples was evaluated by the degradation of methylene blue (MB) in the presence of H₂O₂ under ultraviolet (UV) light illumination. The photodegradation results showed a higher degradation efficiency of modified chabazites, compared to the synthesized chabazite. CuCHA showed an efficiency of 98.92% in MB degradation, with a constant of k = 0.0266 min⁻¹ following a first-order kinetic mechanism. Then, it was demonstrated that the modified chabazites could be used for the photodegradation of dyes.

Tungsten Oxide-Modified SSZ-13 Zeolite as an Efficient Catalyst for Ethylene-To-Propylene Reaction

Among the zeolitic catalysts for the ethylene-to-propylene (ETP) reaction, the SSZ-13 zeolite shows the highest catalytic activity based on both its suitable pore architecture and tunable acidity. In this study, in order to improve the propylene selectivity further, the surface of the SSZ-13 zeolite was modified with various amounts of tungsten oxide ranging from 1 wt% to 15 wt% via a simple incipient wetness impregnation method. The prepared catalysts were characterized with several analysis techniques, specifically, powder X-ray diffraction (PXRD), Raman spectroscopy, temperature-programmed reduction of hydrogen (H2-TPR), temperature-programmed desorption of ammonia (NH3-TPD), inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and N2 sorption, and their catalytic activities were investigated in a fixed-bed reactor system. The tungsten oxide-modified SSZ-13 catalysts demonstrated significantly improved propylene selectivity and yield compared to the parent H-SSZ-13 catalyst. For the tungsten oxide loading, 10 wt% loading showed the highest propylene yield of 64.9 wt%, which was 6.5 wt% higher than the pristine H-SSZ-13 catalyst. This can be related to not only the milder and decreased strong acid sites but also the diffusion restriction of bulky byproducts, as supported by scanning transmission electron microscopy-energy dispersive X-ray spectroscopy (STEM-EDS) observation.

Fabrication of AEI-type aluminosilicate catalyst with sheet-like morphology for direct conversion of propene to butenes

A new class of AEI-type aluminosilicates with sheet-like morphology was synthesized by the CGI-assisted method, which showed a higher iso-butene yield than the cubic particle during the PTB reaction.

CHA-Type Zeolite Prepared by Interzeolite Conversion Method Using FAU and LTL-Type Zeolite: Effect of the Raw Materials on the Crystallization Mechanism, and Physicochemical and Catalytic Properties

The effect of the raw materials including parent zeolite as aluminosilicate sources and organic structure-directing agents (OSDAs) on the crystallization mechanism, and physicochemical and catalytic properties of the CHA-type aluminosilicate zeolite was investigated. For this purpose, the FAU-type and the LTL-type zeolites were used as raw material, and trymethyladamantyl ammonium hydroxide and tetraethyl ammonium hydroxide were used as OSDAs. We firstly found that the CHA-type aluminosilicate zeolite was crystallized from the combination of the LTL-type zeolite and tetraethyl ammonium hydroxide as raw materials. The crystallization behaviors were also monitored in detail. The crystallization was delayed by using the LTL-type zeolite as the starting material regardless of the type of OSDA because of the low solubility of the LTL-type zeolite compared to the FAU-type zeolite. We have found that the Al distribution in the CHA framework was dependent on the raw materials. Thus, the prepared CHA-type aluminosilicate zeolite from the LTL-type zeolite exhibited a high thermal stability and catalytic performance in the methanol to olefins reaction.

Rapid and facile synthesis of hierarchical nanocrystalline SSZ-13 via the interzeolite transformation of ZSM-5

Hierarchical SSZ-13 was successfully synthesized via the interzeolite conversion of ZSM-5 with high framework density (FD = 18.4 T/1000 ų) in the presence of N,N,N-trimethyl-1-adamantanamine hydroxide (TMAdaOH) under hydrothermal conditions.

Synthesis of zeolite SSZ-13 from coal gangue via ultrasonic pretreatment combined with hydrothermal growth method

SSZ-13 zeolite has been widely used in catalysis and adsorption because of good hydrothermal stability and pore structure. However, long crystallization time is the main challenge limiting its industry application. As increased emissions and ineffective treatment, coal gangue not only occupies land, but also pollutes the waterbody and farmland. Using coal gangue as raw material to synthetize zeolite has been considered as an environmentally friendly and effective alternative to solve the issues of accumulation and pollution, which also improves the added value of coal gangue. The ultrasonic assistance has been proven to be one of the potential pretreatment methods to promote the dissolution of crystalline silicon aluminum and reduce the crystallization time of molecular sieve. In this work, SSZ-13 was synthesized by coal gangue via ultrasonic pretreatment combined with hydrothermal growth method. The ultrasonic frequency and power were 20 kHz and 120 W, respectively. The synthesized samples were characterized by XRD, SEM, EDS, BET. The results showed that the crystallization time was shorten to 18 h, which was about 12 h lower than the same conditions of conventional chemicals synthesis. Furthermore, the specific surface area of the synthesized sample was more than 620 m²/g, which also indicated over 95% NO_x conversion across a broad range from 180 to 400 °C and over 94% NO_x conversion at 200-400 °C after hydrothermal treatment 6 h. This study provides a reference for the environmentally friendly utilization of coal gangue and the low-cost rapid synthesis and application of SSZ-13.