Preparation and characterization of V-Loaded titania nanotubes for adsorption/photocatalysis of basic dye and environmental hormone contaminated wastewaters

Ultrasmall copper-metal organic framework (Cu-MOF) quantum dots decorated on waste derived biochar for enhanced removal of emerging contaminants: Synergistic effect and mechanistic insight

This study proposes a novel one-pot hydrothermal impregnation strategy for surface decoration of waste derived pisum sativum biochar with zero‒dimensional Cu‒MOF Quantum dots (PBC‒HK), with an average particle size of 5.67 nm, for synergistic removal of an emerging sulfur containing drug pantoprazole (PTZ) and Basic Blue 26 (VB) dye within 80 min and 50 min of visible-light exposure, respectively. The designed Integrated Photocatalytic Adsorbent (IPA) presented an enhanced PTZ removal efficiency of 95.23% with a catalyst loading of 0.24 g/L and initial PTZ conc. 30 mg/L at pH 7, within 80 min via synergistic adsorption and photodegradation under visible-light exposure. While, on the other hand, 96.31% VB removal efficiency was obtained in 50 min with a catalyst dosage of 0.20 g/L, initial VB conc. 60 mg/L at pH 7 under similar irradiation conditions. An in-depth analysis of the synergistic adsorption and photocatalysis mechanism resulting in the shortened time for the removal of contaminants in the synergistic integrated model has been performed by outlining the various advantageous attributes of this strategy. The first-order degradation rate constant for PTZ was found to be 0.04846 min-1 and 0.04370 min-1 for PTZ and VB, respectively. Adsorption of contaminant molecules on the biochar (PS‒BC) surface can facilitate photodegradation by accelerating the kinetics, and photodegradation promotes regeneration of adsorption sites, contributing to an overall reduction in operation time for removal of contaminants. Besides enhancing the adsorption of targeted pollutants, the carbon matrix of IPAs serves as a surface for adsorption of intermediates of degradation, thereby minimizing the risk of secondary pollution. The photogenerated holes present in the VB is responsible for the generation of •OH radicals. While, the photogenerated electrons present in the CB are captured by Cu2+ of the MOF metal center, reducing it to Cu+, which is subsequently oxidized to produce additional •OH species in the aqueous medium. This process leads to effective charge separation of the photogenerated charge carriers and minimizes the probability of charge recombination as evident from photoluminescence (PL) analysis. Meanwhile, PL studies, EPR and radical trapping experiments indicate the predominant role of •OH radicals in the removal mechanism of PTZ and VB. The investigation of the degradation reaction intermediates was confirmed by HR‒LCMS, on the basis of which the plausible degradation pathway was elucidated in detail. Moreover, effects of pH, inorganic salts, other organic compounds and humic acid concentration have been investigated in detail. The environmental impact of the proposed method was comprehensively evaluated by ICP-OES analysis and TOC and COD removal studies. Furthermore, the economic feasibility and the cost-effectiveness of the catalyst was assessed to address the potential for large scale commercialization. Notably, this research not only demonstrates a rational design strategy for the utilization of solid waste into treasure via the fabrication of IPAs based on MOF Quantum dots (QDs) and waste-derived biochar, but also provides a practical solution for real wastewater treatment systems for broader industrial applications.

Adsorptive removal of dyes from wastewater using a metal-organic framework: A review

Water pollution from synthetic dyes is a growing environmental concern because many dyes have carcinogenic effects on humans and aquatic life. Adsorption is a widely used technology for the separation and removal of dyes from wastewater. However, the dye removal process using conventional adsorbents is not sufficiently efficient for industrial wastewater. Metal-organic frameworks (MOFs) addresses these drawbacks. MOF showed excellent dye removal and degradation capacity owing to its multifunctionality, water-stability, large surface area, tunable pore size and recyclability. Magnetic MOFs retained excellent performance up to several consecutive cycles. Modified MOFs performed as Fenton-like catalysis process which generated abundant reactive radicals that degraded complex organic dyes into simple and less toxic forms which were further adsorbed onto the MOF. This review systematically compiles in-depth studies on the adsorptive removal of dyes from wastewater, MOF adsorption mechanisms, major influencing factors, to adsorption efficiency of MOFs. While all MOFs adsorb dyes through electrostatic attraction, the type of MOF, presence of functional groups, ligands, and pH significantly control the adsorption mechanism. Before developing an MOF, optimization and upgradation of factors and interaction between available adsorption site and adsorbate is needed. Finally, the prospects and new frontiers of MOFs in sustainable water treatment is discussed.

Structured photocatalytic systems: photocatalytic coatings on low-cost structures for treatment of water contaminated with micropollutants-a short review

The persistence of many micropollutants in water and wastewater is of great concern to the contemporary scientific community. Several types of advanced techniques such as heterogeneous photocatalysis are being used for the degradation of micropollutants in waters from domestic, industrial, and agricultural activities. Thus, structured photocatalytic systems are a great alternative in the development of photocatalytic reactors and continuous water treatment systems, as they present good autonomy during the treatment process. Many aspects such as type and geometry of the catalytic structure to be developed must be carefully chosen for the proper functioning of the system, as well as the best routes by which the photocatalysts will be immobilized. In this sense, this work brings the main photocatalytic coating techniques in low-cost structures for the treatment of water and wastewater contaminated with micropollutants. The methodologies and synthesis parameters that can influence the final result of the coating were highlighted, as well as the ability to reuse photocatalysts and methods for pretreating the structural surface. The dip-coating technique was the most reported among the current works due to its simplicity and, predominantly, the pretreatment techniques of the structure are still cleaning the surface with water, soap, and also some alcohols.

Advanced Synthesis and Characterization of Vanadia/Titania Catalysts through a Molecular Approach

Vanadia/titania catalysts were synthesized by the equilibrium deposition filtration (EDF) method, which is a synthesis route that follows a molecular-level approach. The type of interfacial deposition as well as the interfacial speciation of the deposited oxo-V(V) species were determined by means of a model that takes into account experimental “proton-ion” curves and “adsorption edges”. It is shown that at pH ≥ 9.5, the deposition proceeds exclusively through the formation of mono-substituted inner sphere monomeric species in an “umbrella”-like Ti–OV(OH)2O configuration, whilst with lowering of the pH, a second species, namely the disubstituted inner sphere quadrameric species in a (Ti-O)2V4O10 configuration possessing two mono-oxo V=O and two di-oxo V(=O)2 terminations gradually prevails, which is in co-existence with the monomeric species. Raman spectroscopy is used for verifying the solution speciation, which is different compared to the interfacial speciation of the deposited oxo-V(V) species. Furthermore, in situ Raman spectroscopy was used to verify the model-predicted interfacial speciation of the deposited oxo-V(V) species and to monitor the temperature-dependent evolution up to 430 °C. Hence, a controlled formation of a specific vanadia species on a titania surface is enabled, which, depending on the synthesis conditions, can result in specific catalyst characteristics and thus possibly different catalytic behavior for a specific reaction.

Nano-engineered Adsorbent for the Removal of Dyes from Water: A Review

Background:

The huge quantity of wastewater, containing poisonous and hazardous dyes, is released by various industries which pollute water in direct and indirect ways. Most of the dyes are a dangerous class of water contaminants which have affected the environment drastically. Some dyes such as congo red, rhodamine B, methylene blue, methyl violet, and crystal violet are a serious threat to human beings.

Remediation Method:

Numerous methods are available for the removal of dyes from water. Adsorption, being a superior and eco-friendly technique, has advantage of eliminating organic dyes because of the availability of materials as adsorbents. The inexpensive nanomaterials are a more attractive choice for remediation of various dyes due to their unique properties and offer an adequate pathway to adsorb any organic dye from water to overcome its hazardous effects on human health.

Results:

In this review, we have discussed the latest literature related to various types of synthesis, characterization and uses as adsorbent for highly adsorptive removal capacity of nanoparticles for organic dyes.

Conclusion:

Adsorption technology provides an attractive pathway for further research and improvement in more efficient nanoparticles, with higher adsorption capacity, for numerous dyes to eliminate the dyes discharged from various industries and thus reduce the contamination of water. Therefore, nanocomposites may contribute to future prospective water treatment process.