Cu2-xS loaded diatom nanocomposites as novel photocatalysts for efficient photocatalytic degradation of organic pollutants

Transforming Natural Eggshell and Diatomite into Bioactive Calcium Silicate Material for Bone Regeneration

Calcium silicate (CS), a new and important bioceramic bone graft material, is prepared by using eggshells, which have a porous structure and are rich in calcium ions. Furthermore, the preparation of new CS materials using eggshells and diatomaceous earth minimizes their negative impact on the environment. In this study, we prepared CS materials using a high-temperature calcination method. The composition of the material was demonstrated by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analysis. Scanning electron microscopy (SEM) analysis confirmed the porous structure of the CS material. We also introduced ZnO to prepare ZnO-CS with antibacterial properties and showed that ZnO-CS exhibits excellent antibacterial effects through in vitro antibacterial experiments. Subsequent in vitro mineralization experiments demonstrated that ZnO-CS promoted the formation of a hydroxyapatite layer. Furthermore, in vitro cytotoxicity experiments demonstrated that ZnO-CS had very good biosafety and promoted cell proliferation. These findings were confirmed through subsequent cell proliferation experiments. Our results indicate that the novel ZnO-CS is a promising candidate for bone tissue engineering.

The Art of Exploring Diatom Biosilica Biomaterials: From Biofabrication Perspective

Diatom is a common single-cell microalgae with large species and huge biomass. Diatom biosilica (DB), the shell of diatom, is a natural inorganic material with a micro-nanoporous structure. Its unique hierarchical porous structure gives it great application potential in drug delivery, hemostat materials, and biosensors, etc. However, the structural diversity of DB determines its different biological functions. Screening hundreds of thousands of diatom species for structural features of DB that meet application requirements is like looking for a needle in a seaway. And the chemical modification methods lack effective means to control the micro-nanoporous structure of DB. The formation of DB is a typical biomineralization process, and its structural characteristics are affected by external environmental conditions, genes, and other factors. This allows to manipulate the micro-nanostructure of DB through biological regulation method, thereby transforming the screening mode of the structure function of DB from a needle in a seaway to biofabrication mode. This review focuses on the formation, biological modification, functional activity of DB structure, and its application in biomaterials field, providing regulatory strategies and research idea of DB from the perspective of biofabrication. It will also maximize the possibility of using DB as biological materials.

Ag3VO4/g-C3N4/diatomite ternary compound reduces Cr(vi) ion in aqueous solution effectively under visible light

In recent years, the conversion of Cr(vi) to Cr(iii) ions by semiconductor photocatalysis technology has been considered to be an effective method to solve this problem. In this paper, a kind of ternary composite, Ag3VO4/g-C3N4/diatomite (AVO/CN/DT), was synthesized by a two-step method (annealing-precipitation). Through a series of characterization analyses, the crystal morphology, microstructure, optical properties and photoelectrochemical properties of the material were characterized and analyzed. The band edge of g-C3N4 was red-shifted due to the addition of Ag3VO4 and diatomite. Consequently, the visible light response of the composites was intensified. Taking Cr(vi) in aqueous solution as a target pollutant, the degradation efficiency using 4AVO/CN/0.06DT reached 70% within 60 min under visible light irradiation, far exceeding the degradation efficiency using the pure substances. The cyclic degradation performance of the composite material was tested, and it still had a stable degradation effect after three cycles. The degradation efficiency in solution at different pH values was investigated. When the pH value of the solution gradually increased, the degradation efficiency gradually decreased, which was mainly caused by the different forms of Cr(vi) under different pH values. A corresponding degradation mechanism was proposed. Diatomite provided a reaction site for Ag3VO4 and g-C3N4, which promoted the photoreduction of Cr(vi). This work provides some reference significance for deepening the application field of diatomite and treating heavy metal ion wastewater.

Biogenic Synthesis, Characterization and Antibacterial Potential Evaluation of Copper Oxide Nanoparticles Against Escherichia coli

The development of resistance against antibiotics used to treat bacterial infections along with the prevalence of medication residues presents significant public health problems globally. Antibiotic-resistant germs result in infections that are difficult or impossible to treat. Decreasing antibiotic effectiveness calls for rapid development of alternative antimicrobials. In this respect, nanoparticles (NPs) of copper oxide (CuO) manifest a latent and flexible inorganic nanostructure with noteworthy antimicrobial impact. Green synthesis of CuO NPs was performed in the current study, which was then doped with varying amounts of ginger (Zingiber officinale, ZO) and garlic (Allium sativum, AS) extracts. In low and high doses, the synthesized compound was used to measure the antimicrobial effectiveness against pathogenic Escherichia coli. The present research successfully demonstrated a renewable, eco-friendly synthesis technique with natural materials that is equally applicable to other green metal oxide NPs.

Enhanced Photocatalytic Degradation of Ternary Dyes by Copper Sulfide Nanoparticles

We report the effect of thermolysis time on the morphological and optical properties of CuS nanoparticles prepared from Cu(II) dithiocarbamate single-source precursor. The as-prepared copper sulfide nanoparticles were used as photocatalysts for the degradation of crystal violet (CV), methylene blue (MB), rhodamine B (RhB), and a ternary mixture of the three dyes (CV/MB/RhB). Powder XRD patterns confirmed the hexagonal covellite phase for the CuS nanoparticles. At the same time, HRTEM images revealed mixed shapes with a particle size of 31.47 nm for CuS1 prepared at 30 min while CuS2 prepared at 1 h consists of mixtures of hexagonal and nanorods shaped particles with an average size of 21.59 nm. Mixed hexagonal and spherically shaped particles with a size of 17.77 nm were obtained for CuS3 prepared at 2 h. The optical bandgaps of the nanoparticles are 3.00 eV for CuS1, 3.26 eV for CuS2 and 3.13 eV for CuS3. The photocatalytic degradation efficiency showed that CuS3 with the smallest particle size is the most efficient photocatalyst and degraded 85% of CV, 100% of MB, and 81% of RhB. The as-prepared CuS showed good stability and recyclability and also degraded ternary dyes mixture (CV/MB/RhB) effectively. The byproducts of the dye degradation were evaluated using ESI-mass spectrometry.

In-situ synthesis of CuS@carbon nanocomposites and application in enhanced photo-fenton degradation of 2,4-DCP

Novel CuS nanoparticles embedded into carbon nanosheets (CuS@CNs) were prepared in situ by applying wheat straw cellulose/feather protein hydrogel beads as templates and were used to photocatalytically activate H₂O₂ to degrade 2,4-dichlorphenol (2,4-DCP). The photo-Fenton catalytic properties of the nanocomposite catalysts obtained under different synthetic conditions, including different Cu²⁺ concentrations, S^2- concentrations and calcination temperatures, were evaluated. The results showed that CuS@CNs with 0.1 M Cu²⁺, 0.1 M S^2- at 800 °C presented excellent photo-Fenton degradation performance for 2,4-DCP (25 mg/L) in the presence of H₂O₂ and could remove 90% of 2,4-DCP in 2.5 h. The water quality parameters (pH, Cl^-, HCO₃^-, H₂PO₄^- and SO₄^2-) exhibited different effects on the photocatalytic degradation process. The catalytic activity of the CuS@CNs used in the cycle could be recovered after thermal regeneration. Radical quenching and electron paramagnetic resonance (EPR) experiments confirmed that ·OH species were main active radicals contributing to the degradation of 2,4-DCP. The photocatalytic mechanism of CuS@CNs was also explored by photoelectrochemical (PEC) measurements and UV-vis diffuse reflectance spectroscopy (DRS). Incorporation of carbon nanosheets could significantly improve the separation of photogenerated charge carriers to stimulate pollutant degradation by CuS. Based on the detected intermediates, the degradation pathway of 2,4-DCP in the CuS@CNs/H₂O₂ reaction system was also proposed.

Near-Infrared-Responsive Photocatalysts

Broadening the absorption of light to the near-infrared (NIR) region is important in photocatalysis to achieve efficient solar-to-fuel conversion. NIR-responsive photocatalysts that can utilize diffusive solar energy are attractive for alleviating the energy crisis and environmental pollution. Over the past few years, considerable progress on the component and structural design of NIR-responsive photocatalysts have been reported. This study aims to systematically summarize recent progress toward the material design and mechanism optimization of NIR-responsive photocatalysts in this area. Depending on the main strategies for harvesting NIR photons, NIR-responsive photocatalysts can be categorized as direct NIR-light photocatalysts, indirect NIR-light photocatalysts, and photothermal photocatalysts. Furthermore, the construction and application of different NIR-responsive photocatalytic systems are summarized. Conclusions and perspectives are presented to further explore the potential of NIR-responsive photocatalysts in this field.

Bio Framework-Derived Facile MoO3-NiO-PdO-Pd Nanomaterial for Detoxification of Organic Pollutants

INTRODUCTION

The catalytic behavior of metal oxide nanomaterials for removal of organic pollutants under dark ambient conditions, without any additional stimulant, is of great interest among the scientific community.

METHODS

In this account, a nanomaterial of ternary metal oxides (MoO3-NiO-PdO-Pd) was synthesized via greener approach and was explored for degradation of methyl orange in water environment in dark ambient conditions in comparison with light conditions. The biochemical species of Abies pindrow were treated with aqueous solution of precursor's salt following sol gel synthesis strategy. We further attuned morphology and chemistry of MoO3-NiO-PdO-Pd by incorporating bioactive compounds of A. pindrow.

RESULT AND DISCUSSION

The bio-fabricated MoO3-NiO-PdO-Pd revealed outstanding catalytic behavior with 92% degradation of methyl orange within 15 min in the dark at ambient temperature and pressure. Whereas, in the presence of visible light irritation, the catalyst degraded 97% of methyl orange in 15 min. According to the reaction kinetics of degradation, the catalysts illustrated good stability in light (R2=0.93) as well as in dark conditions (R2=0.98). Furthermore, the outstanding reusability and recyclability of the synthesized nanomaterial was observed for four runs of the experiment under dark and light conditions.

CONCLUSION

Therefore, A. pindrow-synthesized MoO3-NiO-PdO-Pd nanocatalyst demonstrated significant potential for detoxification of organic pollutants for water remediation.

Preparation, characterization and photocatalytic performance of heterostructured CuO-ZnO-loaded composite nanofiber membranes

Inorganic semiconductor oxides loaded on composite nanofibers (CNFs) have been widely applied in environmental monitoring, industry, aviation, and transportation. In this paper, heterostructured CuO-ZnO-loaded CNF membranes (CNFMs) were prepared successfully by a combination of electrospinning, heat treatment, and hydrothermal synthesis. The influence of the synthesis parameters on morphology, structure, and properties of the CNFMs was investigated, and the optimal process parameters were determined. Then, the CNFMs obtained with optimal process parameters were applied for the photocatalytic degradation of methyl orange. It was found that the CNFMs could be reused to degrade methyl orange at least three times, and the degradation rate remained above 90%.

Dual functional oyster shell-derived Ag/ZnO/CaCO3 nanocomposites with enhanced catalytic and antibacterial activities for water purification

Transforming biological waste into high value-added materials has attracted extensive current research interest in the wastewater treatment field. In this study, oyster shell-derived CaCO₃ was used as a solid support to construct efficient Ag/ZnO/CaCO₃via Cacumen platycladi extract. As compared to binary Ag/CaCO₃ and ZnO/CaCO₃, the as-obtained Ag/ZnO/CaCO₃ exhibits excellent performance for the reduction of 4-nitrophenol (4-NP) with a reduction rate of 97.6% within 8 minutes. Furthermore, Ag/ZnO/CaCO₃ exhibited superior antibacterial activity in inhibiting the growth of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) with minimum inhibition concentrations (MICs) of 60 μg mL⁻¹ and 30 μg mL⁻¹, respectively. The observation of the superior activity for the reduction of 4-NP and antibacterial test of Ag/ZnO/CaCO₃ can be attributed to the synergistic effect of Ag, ZnO and the oyster shell-derived CaCO₃. This study provides a strategy in developing highly efficient catalysts for the reduction of 4-NP and antibacterial agents based on the oyster shell-derived CaCO₃.

Oyster shell was used as an efficient template for synthesis Ag/ZnO/CaCO₃ nanocomposites, which showed the enhanced catalytic and antibacterial activities.