Photocatalytic toluene degradation over Bi-decorated TiO2: Promoted O2 supply to catalyst’s surface by metallic Bi

The selection of a nitrogen precursor for the construction of N-doped titanium dioxide with enhanced photocatalytic activity for the removal of gaseous toluene

The preparation of nitrogen-doped TiO2 (i.e., N-TiO2) catalysts is a highly effective option to improve the photocatalytic activity of TiO2. Nonetheless, relatively little is known about the effects of dopant precursors selected for their preparation with regard to the photocatalytic efficacy. In this study, three types of dopants are selected and used as N sources (urea (U), melamine (M), and aqueous ammonia (A)) for N-TiO2 samples with the name codes of NTU, NTM, and NTA, respectively. The photocatalytic efficacy of these N-TiO2 samples is examined against toluene in a packed bed flow reactor. Under optimal conditions (e.g., relative humidity (RH) = 20% and gas hourly space velocity (GHSV) = 1698 h-1), the superiority of NTA is evident over others with a quantum efficiency (QE) of 7.03 × 10-4 molecules photon-1, a space time yield (STY) of 1.38 × 10-4 molecules photon-1 mg-1, and a specific clean air delivery rate (SCADR) of 1148.8 L g-1 h-1. The analysis based on in-situ diffuse reflectance infrared Fourier transform spectroscopy and gas chromatography-mass spectrometry confirms the formation of several intermediates such as benzyl alcohol, benzaldehyde, benzoic acid, and alkane species through ring opening reactions. In addition, the prepared NTA photocatalyst exhibits the highest toluene photocatalytic degradation efficiency among all TiO2-based catalysts surveyed to date. Overall, this study offers as a valuable guideline for the development of advanced TiO2 catalytic systems (such as N-TiO2) for the treatment of aromatic hydrocarbons in indoor air.

Clarifying the Direct Generation of •OH Radicals in Photocatalytic O2 Reduction: Theoretical Prediction Combined with Experimental Validation

This work systematically studied thermocatalytic and photocatalytic pathways of formaldehyde degradation and H-assisted O2 reduction over a Pt13/anatase-TiO2(101) composite via DFT calculations together with constrained molecular dynamics (MD) simulations. We show that photocatalytic O2 reduction on Pt/TiO2 can directly generate •OH radicals (*O2 → *OOH → •OH) via two hydrogenation steps with small barriers, and the product selectivity (*H2O2 or •OH) is decided by the relative position between catalyst Fermi level and •OH/*H2O2 redox potential (theoretical determination of 0.07 V referencing to the SHE). Such a novel reaction channel was furthermore validated at the liquid-solid interface via constrained MD simulations and experimental electron paramagnetic resonance detections, and a wide range of H resources, e.g., *HCHO, *HCO, *H (H+ + e-), can always drive the direct •OH generation. The additional portion of e--triggered •OH radicals are prone to diffuse into solution or the TiO2 surface and furthermore cooperate with the conventional h+-driven photooxidations.

Dual-Plasmon Resonance Coupling Promoting Directional Photosynthesis of Nitrate from Air

Photocatalysis, particularly plasmon-mediated photocatalysis, offers a green and sustainable approach for direct nitrogen oxidation into nitrate under ambient conditions. However, the unsatisfactory photocatalytic efficiency caused by the limited localized electromagnetic field enhancement and short hot carrier lifetime of traditional plasmonic catalysts is a stumbling block to the large-scale application of plasmon photocatalytic technology. Herein, we design and demonstrate the dual-plasmonic heterojunction (Bi/Csx WO3 ) achieves efficient and selective photocatalytic N2 oxidation. The yield of NO3 - over Bi/Csx WO3 (694.32 μg g-1  h-1 ) are 2.4 times that over Csx WO3 (292.12 μg g-1  h-1 ) under full-spectrum irradiation. The surface dual-plasmon resonance coupling effect generates a surge of localized electromagnetic field intensity to boost the formation efficiency and delay the self-thermalization of energetic hot carriers. Ultimately, electrons participate in the formation of ⋅O2 - , while holes involve in the generation of ⋅OH and the activation of N2 . The synergistic effect of multiple reactive oxygen species drives the direct photosynthesis of NO3 - , which achieves the overall-utilization of photoexcited electrons and holes in photocatalytic reaction. The concept that the dual-plasmon resonance coupling effect facilitates the directional overall-utilization of photoexcited carriers will pave a new way for the rational design of efficient photocatalytic systems.

Photocatalytic Oxidation for Volatile Organic Compounds Elimination: From Fundamental Research to Practical Applications

Photocatalysis is regarded as one of the most promising technologies for indoor volatile organic compounds (VOCs) elimination due to its low cost, safe operation, energy efficiency, and high mineralization efficiency under ambient conditions. However, the practical applications of this technology are limited, despite considerable research efforts in recent decades. Until now, most of the works were carried out in the laboratory and focused on exploring new catalytic materials. Only a few works involved the immobilization of catalysts and the design of reactors for practical applications. Therefore, this review systematically summarizes the research and development on photocatalytic oxidation (PCO) of VOCs, with emphasis on recent catalyst's immobilization and reactor designs in detail. First, different types of photocatalytic materials and the mechanisms for PCO of VOCs are briefly discussed. Then, both the catalyst's immobilization techniques and reactor designs are reviewed in detail. Finally, the existing challenges and future perspectives for PCO of VOCs are proposed. This work aims to provide updated information and research inspirations for the commercialization of this technology in the future.

Efficient photocatalytic toluene degradation over heterojunction of GQDs@BiOCl ultrathin nanosheets with selective benzoic acid activation

Photocatalytic toluene degradation has attracted tremendous attention because of the growing environmental problem. However, conventional photocatalytic materials used for toluene degradation usually suffer from low carrier separation efficiency and poor stability which will degrade the catalytic performance. Herein, we report the synthesis of a novel heterostructure of GQDs@BiOCl ultrathin nanosheets where the GQDs can rapidly capture and transport photogenerated electrons for effective charge separation, promoting the generation of more reactive oxygen species (·O₂^- and ·OH radicals) for toluene degradation. In situ DRIFTS measurement and theoretical calculation are performed to unveil the reaction intermediates and the underlying toluene oxidation mechanism. The GQDs@BiOCl heterojunction could facilitate the adsorption and conversion of toluene and the reaction intermediates. Especially, the heterojunction greatly enhances the activation and conversion of benzoic acid and thus expedites the complete toluene degradation. This work presents a new insight on the design of high-performance photocatalysts for efficient degradation of typical air pollutants.

Rare-earth single atoms decorated 2D-TiO2 nanosheets for the photodegradation of gaseous O-xylene

In this work, rare-earth single atoms (La, Er) were decorated on the surface of 2D-TiO₂ nanosheets by an impregnation-calcination strategy. The formation of rare-earth single atoms was certified by AC HAADF-STEM and XAS. TiO₂ decorated with rare-earth single atoms (La₁-TiO₂ and Er₁-TiO₂) exhibited outstanding photocatalytic activity than pure 2D-TiO₂ nanosheets (2D-TiO₂) towards gas-phase degradation of O-xylene. Compared with 2D-TiO₂, the rare-earth single atoms greatly improved the adsorption capacity of O-xylene without increasing their specific surface area. This is because rare-earth single atoms provide additional adsorption sites and reduce the adsorption energy of O-xylene. In addition, the hybrid orbital formed by the combination of rare-earth single atom and oxygen atom is beneficial to the rapid transmission and separation of photo-induced electrons, thereby improving the performance of photocatalytic degradation. In addition, in-situ DRIFTS and GC-MS were used to reveal the photocatalytic oxidation mechanism. Interestingly, the results showed that the La₁-TiO₂ and Er₁-TiO₂ samples can reduce the types of intermediates and simplify the reaction route, implying that the single atoms play an important role in the modulation and thorough mineralization of intermediate products. This work shows that the rare-earth single atom decorated 2D-TiO₂ nanosheets have great potential in photocatalytic air pollution control.

Constructing a Z-Scheme Heterojunction Photocatalyst of GaPO4/α-MoC/Ga2O3 without Mingling Type-II Heterojunction for CO2 Reduction to CO

Constructing Z-scheme heterojunction photocatalysts is a prevalent strategy to prolong the lifetime of photoinduced charge carriers without reducing their redox potentials. Nevertheless, these photocatalysts were usually mingled with type-II heterojunction, leading to a decrease in the redox potentials of photoinduced charge carriers. Herein, based on the absolute electronegativity of semiconductors, a Z-scheme heterojunction photocatalyst of GaPO₄/α-MoC/Ga₂O₃ was designed and successfully constructed, in which the formation of type-II heterojunction was prevented between GaPO₄ and Ga₂O₃. In the GaPO₄/α-MoC/Ga₂O₃ photocatalyst, the conduction band (CB) and valance band (VB) potentials and the Fermi level of Ga₂O₃ are higher than those of GaPO₄, respectively. Under irradiation, photoinduced electrons on the CB of GaPO₄ migrate to the electron mediator α-MoC and subsequently recombine with the photoinduced holes of Ga₂O₃, thereby retaining the photoinduced charge carriers with higher redox potentials. As a result, GaPO₄/α-MoC/Ga₂O₃ exhibits a 4-fold enhancement of activity for CO₂ photoreduction, compared to Ga₂O₃. Photocatalytic mechanism studies indicate that superoxide radicals might be an important intermediate for CO₂ reduction to CO. The present work supplies a paradigm to construct a Z-scheme heterostructure without mingling type-II heterojunction via energy band engineering.

Insights into the Mechanism of the Bi/BiVO4 Composites for Improved Photocatalytic Activity

The increasing concentration of residual ciprofloxacin (CIP) can cause potential harm to the environment. Photocatalysis has been regarded as an effective method for the degradation of CIP. Bi/BiVO4 with excellent photocatalytic performance was synthesized partial reduction with NaBH4. The structure, morphology, composition, and optical performance of BiVO4 and Bi/BiVO4 were characterized by a variety of techniques. The results showed that the Bi/BiVO4 exhibits high photocatalytic activity in the degradation of CIP. Comparison of BiVO4 and Bi/BiVO4 has lower photoluminescence intensity and higher photocurrent responses intensity. The introduction of Bi made Bi/BiVO4 have a higher charge separation efficiency and generate more active free radicals. In addition, the radical trapping experiments revealed that superoxide free radicals and holes were the main active free radicals during the degradation of CIP. The pathway of CIP degradation was investigated through high performance liquid chromatography-mass spectrometry, and a possible degradation mechanism was proposed.

The Influence of Calcination Temperature on Photocatalytic Activity of TiO2-Acetylacetone Charge Transfer Complex towards Degradation of NOx under Visible Light

The improvement of photocatalytic activity of TiO2-based nanomaterials is widely investigated due to the tentative of their industrialization as environmental photocatalysts and their inherently low solar spectrum sensitivity and rapid recombination of charge carriers. Coupling of oxygen-based bidentate diketone to nanocrystalline TiO2 represents a potential alternative for improving the holdbacks. Formation of TiO2-acetylacetone charge transfer complex (CTC) by sol-gel route results in a hybrid semiconductor material with photodegradation activity against toxic NOx gas. In this research, the influence of the chelating agent acetylacetone (ACAC) content on the CTC photocatalytic efficiency under visible light was evaluated. A high content of ACAC in the CTC is not a decisive factor for efficiency of photocatalytic reactions. In fact, the highest efficiency for NOx degradation (close to 100%, during 1 h of visible light exposure) was reported for the material calcined in air at 300 °C with the content of strongly bonded acetylacetone not higher than 3 wt.%. Higher calcination temperature (400 °C) left TiO2 almost completely depleted in ACAC, while at the highest applied temperature (550 °C) a portion of anatase was transformed into rutile and the sample is free of ACAC. The analyses pointed out that superoxide anion radical (O2−) plays an active role in photo-oxidation of NOx. Our findings indicate that this CTC has both high visible light spectral sensitivity and photocatalytic efficiency.

Impact of Titanium Dioxide (TiO2) Modification on Its Application to Pollution Treatment—A Review

A high-efficiency method to deal with pollutants must be found because environmental problems are becoming more serious. Photocatalytic oxidation technology as the environmentally-friendly treatment method can completely oxidate organic pollutants into pollution-free small-molecule inorganic substances without causing secondary pollution. As a widely used photocatalyst, titanium dioxide (TiO2) can greatly improve the degradation efficiency of pollutants, but several problems are noted in its practical application. TiO2 modified by different materials has received extensive attention in the field of photocatalysis because of its excellent physical and chemical properties compared with pure TiO2. In this review, we discuss the use of different materials for TiO2 modification, highlighting recent developments in the synthesis and application of TiO2 composites using different materials. Materials discussed in the article can be divided into nonmetallic and metallic. Mechanisms of how to improve catalytic performance of TiO2 after modification are discussed, and the future development of modified TiO2 is prospected.

Revealing adsorption and the photodegradation mechanism of gas phase o-xylene on carbon quantum dots modified TiO2 nanoparticles

Here, we report the photocatalytic oxidation (PCO) of o-xylene on carbon quantum dots (CQDs) modified TiO₂ nanoparticles. The results demonstrated that with 1 wt% CQDs loading, 87 % of o-xylene (50 ppm) can be photodegraded, which is 55.3 % higher than pure TiO₂ (56 %) under UV/visible light. This improved photocatalytic activity is associated with the important role of CQDs on TiO₂ surface, which increased the o-xylene adsorption and facilitated the photogenerated hole-electron separation process. Also, the 1 wt%CQDs/TiO₂ nanocomposite showed photocatalytic activity in the visible region (λ > 400 nm) compared to pure TiO₂ (inactive). The DFT study revealed that o-xylene strongly adsorb on TiO₂ (001) surface than (101) through π electrons of the aromatic ring. The in situ DRIFTS study showed that free OH groups on the photocatalyst surface could act as effective Lewis sides for the o-xylene adsorption. The interaction of π electrons of the aromatic ring and isolated OH groups was also observed. The FTIR peaks for CO₂ increased in the case of CQDs/TiO₂ nanocomposite contrasted to pure TiO₂, which suggested that the presence of CQDs improved the mineralization potency of TiO₂. These findings should affect the quest for a better photocatalyst to photodegrade VOCs.