Formation and depression of N2O in selective reduction of NO by NH3 over Fe2O3-promoted V2O5-WO3/TiO2 catalysts: Roles of each constituent and strongly-adsorbed NH3 species

Research progress of vanadium pentoxide photocatalytic materials

Photocatalytic reactions convert solar energy into chemical energy through a clean and green reaction process. Photocatalytic technology based on semiconductor materials provides us with a new idea in energy utilization and environmental governance. It was found that vanadium pentoxide (V₂O₅) has a narrow band gap, wide response range in the visible region, high oxygen density in the V₂O₅ lattice, high oxidation state of V⁵⁺, small energy requirement, and superior catalytic activity in partial oxidation. Therefore, the utilization rate of sunlight and photocatalytic oxidation can be greatly improved using V₂O₅ materials. However, the narrow band gap of V₂O₅ also makes it easier for the photogenerated electrons and holes to recombine in the excited state, and the stored energy is instantly consumed by carrier recombination. Therefore, how to promote the carrier separation of V₂O₅ and improve the photocatalytic efficiency are the key problems to be solved. Herein, several methods to improve the photocatalytic performance of V₂O₅ are reviewed, including metallic ion doping, non-metallic ion doping, semiconductor recombination, and noble metal deposition. Finally, it is suggested that future research directions should focus on a variety of modification methods simultaneously to promote photocatalytic efficiency and lower the cost, which will enable V₂O₅ to have a broad development prospect in the field of photocatalysis.

Vanadium Oxide: Phase Diagrams, Structures, Synthesis, and Applications

Vanadium oxides with multioxidation states and various crystalline structures offer unique electrical, optical, optoelectronic and magnetic properties, which could be manipulated for various applications. For the past 30 years, significant efforts have been made to study the fundamental science and explore the potential for vanadium oxide materials in ion batteries, water splitting, smart windows, supercapacitors, sensors, and so on. This review focuses on the most recent progress in synthesis methods and applications of some thermodynamically stable and metastable vanadium oxides, including but not limited to V₂O₃, V₃O₅, VO₂, V₃O₇, V₂O₅, V₂O₂, V₆O₁₃, and V₄O₉. We begin with a tutorial on the phase diagram of the V-O system. The second part is a detailed review covering the crystal structure, the synthesis protocols, and the applications of each vanadium oxide, especially in batteries, catalysts, smart windows, and supercapacitors. We conclude with a brief perspective on how material and device improvements can address current deficiencies. This comprehensive review could accelerate the development of novel vanadium oxide structures in related applications.

Elucidating the facet-dependent reactivity of CrMn catalyst for selective catalytic reduction of NOx with NH3

The facet-dependent reactivity of CrMn catalysts was still unclear, hindering the further enhancement of their low-temperature SCR performance. Herein, the facet-dependent reactivity of CrMn_1.5O₄ catalyst for NH₃-SCR of NO_x was innovatively illustrated by numerous characterizations and density functional theory (DFT) calculations. Exposed (100) facet of CrMn_1.5O₄ catalyst exhibited best low-temperature SCR activity with ≥90 % NO conversion within 148-296 °C and 2.86 × 10^-3 mol/(g·s) reaction rate within 160-240 °C. The characterizations revealed that (100) facet could induce the increase of BET specific area, electron transfer, concentration of Mn⁴⁺ and O_α, surface acidity, redox ability, NH₃ and NO_x adsorption/activation capacity. Subsequently, DFT calculations demonstrated that (100) facet exhibited the strongest affinity for NH₃ and NO due to its unique 3O_3c-Mn_5c-2O_4c bond and abundant charges transfer near the active adsorption sites, and Brønsted acid and oxygen vacancies were most easily formed on (100) facet. Furthermore, H₂O formation as the rate determining step easily occurred on (100) facet. Eventually, we successfully improved the low-temperature SCR activity of CrMn_1.5O₄ catalyst by further tailoring highly active (100) facet from 0.754 to 0.865. This work provides the deeper understanding of facet-dependent reactivity and a good strategy to improve the catalytic activity of the catalysts.

Waste straw derived Mn-doped carbon/mesoporous silica catalyst for enhanced low-temperature SCR of NO

This work proposed a new strategy for the high value utilization of waste straw, in which a Mn-doped carbon/mesoporous silica composite catalyst was prepared by simultaneous utilization of carbon and silicon source from straw for low-temperature denitration. The results showed that the NO conversion rate reached 93% at 180℃ for the composite catalyst with Si/C mass ratio of 35% (Mn/ACMS (35%)). This was significantly higher than those of the activated carbon catalyst (Mn/AC) and mesoporous silica catalyst (Mn/MS), i.e., 58% and 50%, respectively. The SEM images showed that mesoporous silica nanoparticles were dispersed evenly on the carbon surface to form composite materials. XPS results indicated that Mn/ACMS (35%) catalyst showed higher content of chemically adsorbed oxygen (O_α) and Mn⁴⁺ (54.67% and 46.81%) than Mn/AC catalyst (34.38% and 17.49%) and Mn/MS catalyst (32.71% and 30.18%), which was responsible for the improved catalytic activity. Moreover, NH₃-TPD results revealed that Mn/ACMS (35%) had high surface acidity of 6.47 mmol·g^-1, significantly higher than Mn/AC catalyst of 1.51 mmol·g^-1, which was beneficial for adsorbing NH₃. H₂-TPR results suggested that Mn/ACMS (35%) catalyst had much higher H₂ consumption of 1.32 mmol·g^-1 than Mn/AC and Mn/MS catalyst, suggesting better redox performance. The results demonstrated that the straw derived Mn-doped carbon/mesoporous silica composite catalyst can be a potential material for low-temperature denitration.