Evaluation of analytical methods and workflow performance of the Architect ci8200 integrated serum/plasma analyzer system

Analytical evaluation and Sigma metrics of 6 next generation chemistry assays on the Abbott Architect system

BACKGROUND

We evaluated analytical and Sigma performance for 6 next generation chemistry assays on the Abbott Architect c8000 system.

METHODS

Albumin with bromocresol purple or green, amylase, cholesterol, total protein, and urea nitrogen were analyzed using photometric technology. Analytical performance goals were defined based on Accreditation Canada Diagnostics (ACD) and Clinical Laboratory Improvement Amendments (CLIA). Precision study consisted of testing 2 quality control concentrations and 3 patient serum sample pools, twice a day in quintuplicate over 5 days. Linearity testing consisted of 5-6 concentrations of commercial linearity materials. We tested a minimum of 120 serum/plasma specimens on the new and current Architect methods for comparison. We assessed accuracy with reference materials for 5 assays, and a calibration standard for cholesterol. Bias from the reference standard target value was used for Sigma metric analysis.

RESULTS

Observed total imprecision of the assays ranged from 0.5 to 4%, meeting pre-defined goals. Linearity was acceptable over the tested range. Measurements on the new and current Architect methods were comparable. Accuracy ranged from 0 to 2.0% absolute mean difference from target value. All 6 next generation clinical chemistry assays demonstrated Six Sigma quality, using CLIA standards.

CONCLUSION

Applying ACD recommendations, 5 assays showed Six Sigma, while cholesterol showed Five Sigma performance.

Malaysian Propolis and Metformin Synergistically Mitigate Kidney Oxidative Stress and Inflammation in Streptozotocin-Induced Diabetic Rats

Diabetic nephropathy is reported to occur as a result of the interactions between several pathophysiological disturbances, as well as renal oxidative stress and inflammation. We examined the effect of Malaysian propolis (MP), which has anti-hyperglycemic, antioxidant and anti-inflammatory properties, on diabetes-induced nephropathy. Diabetic rats were either treated with distilled water (diabetic control (DC) group), MP (300 mg/kg b.w./day), metformin (300 mg/kg b.w./day) or MP + metformin for four weeks. We found significant increases in serum creatinine, urea and uric acid levels, decreases in serum sodium and chloride levels, and increase in kidney lactate dehydrogenase activity in DC group. Furthermore, malondialdehyde level increased significantly, while kidney antioxidant enzymes activities, glutathione level and total antioxidant capacity decreased significantly in DC group. Similarly, kidney immunoexpression of nuclear factor kappa B, tumor necrosis factor-α, interleukin (IL)-1β and caspase-3 increased significantly, while IL-10 immunoexpression decreased significantly in DC group relative to normal control group. Histopathological observations for DC group corroborated the biochemical data. Intervention with MP, metformin or both significantly mitigated these effects and improved renal function, with the best outcome following the combined therapy. MP attenuates diabetic nephropathy and exhibits combined beneficial effect with metformin.

Optimization on reagent-loading manner for modular clinical chemistry analyzer series: simulations and verifications

Objectives

The pre- and post-analytical processes have been discussed both in total laboratory system (TLA) and modular automation (MA). The analytical process, especially reagent-related factors influences on the integrated clinical chemistry analyzer, demonstrates a significant effect on clinical chemistry analyzer. Modular analyzer reagent-loading mode influences two mainly factors, testing turnaround time (tTAT) and the cost. Furthermore, how to definite the different reagent loading manners and verify the best reagent loading manner is big challenge.

Methods

We focus on tTAT, and study how the reagent-related factors effect TAT by simulations and verifications. Parameters were simulated by cobas 8000 workflow simulator for reagent-loading manner with at least three positions (Pattern 1), the module-parallel reagent-loading manner (Pattern 2) and the single-position loading mode (Pattern 3).

Results

tTAT, reagent on-line time, quality control (QC) cost and performance verification times all declined by 43%. Tuesday effect solved the repetitive problem for verification. Pattern 2 shows optimal performance in Tuesday effect-based verification.

Conclusions

The optimization of reagent-loading manner saved much workforce, and reduced the QC cost.

Performance and comparability of laboratory methods for measuring ferritin concentrations in human serum or plasma: A systematic review and meta-analysis

BACKGROUND

Different laboratory methods are used to quantify ferritin concentrations as a marker of iron status. A systematic review was undertaken to assess the accuracy and comparability of the most used methods for ferritin detection.

METHODS AND FINDINGS

National and regional databases were searched for prospective, retrospective, sectional, longitudinal and case-control studies containing the characteristics and performance of at least one method for serum/plasma ferritin determinations in humans published to date. The analysis included the comparison between at least 2 methods detailing: sensitivity, precision, accuracy, predictive values, inter-methods adjustment, and use of international reference materials. Pooled method performance was analyzed for each method and across methods.

OUTCOMES

Search strategy identified 11893 records. After de-duplication and screening 252 studies were assessed, including 187 studies in the qualitative analysis and 148 in the meta-analysis. The most used methods included radiometric, nonradiometric and agglutination assays. The overall within-run imprecision for the most reported ferritin methods was 6.2±3.4% (CI 5.69-6.70%; n = 171), between-run imprecision 8.9±8.7% (CI 7.44-10.35%; n = 136), and recovery rate 95.6% (CI 91.5-99.7%; n = 94). The pooled regression coefficient was 0.985 among all methods analyzed, and 0.984 when comparing nonradiometric and radiometric methods, without statistical differences in ferritin concentration ranging from 2.3 to 1454 μμg/L.

CONCLUSION

The laboratory methods most used to determine ferritin concentrations have comparable accuracy and performance. Registered in PROSPERO CRD42016036222.

Predictors of radiation-induced gastrointestinal morbidity: A prospective, longitudinal study following radiotherapy for carcinoma of the prostate

Background Chronic gastrointestinal (GI) morbidity occurs in ≥50% of patients after external beam radiotherapy (EBRT) for carcinoma of prostate (CaP). This prospective, longitudinal study examines which baseline measurements of: 1) homocysteine and micronutrients in plasma; 2) chromosome damage/misrepair biomarkers; and 3) anal and rectal dose volume metrics predict GI morbidity after EBRT. Patients and methods In total, 106 patients with CaP had evaluations of GI symptoms (modified LENT-SOMA questionnaires) before EBRT and at one month, one, two and three years after its completion. Other variables measured before EBRT were: 1) plasma concentrations of homocysteine and micronutrients including caroteinoids and selenium; 2) chromosome damage/DNA misrepair (micronuclei/nucleoplasmic bridge) indices; and 3) mean anal and rectal wall doses and volumes of anal and rectal walls receiving ≥40 Gy and ≥60 Gy. Univariate and multivariate analyzes examined the relationships among: 1) plasma levels of homocysteine and micronutrients; 2) indices of chromosome damage/DNA misrepair; and 3) mean anal and rectal wall doses and volumes of anal and rectal walls receiving ≥40 Gy and ≥60 Gy and total GI symptom scores from one month to three years after EBRT. Results Increased frequency and urgency of defecation, rectal mucous discharge and bleeding after EBRT resulted in sustained rises in total GI symptom scores above baseline at three years. On univariate analysis, total GI symptom scores were significantly associated with: 1) plasma selenium and α tocopherol; 2) micronuclei indices of DNA damage; 3) mean anal and rectal wall doses; and 4) volumes of anal and rectal wall receiving ≥40 Gy and ≥60 Gy (p = 0.08-<0.001). On multivariate analysis, only volume of anal wall receiving ≥40 Gy was significant for increased GI symptoms after EBRT (p < 0.001). Conclusion The volume of anal wall receiving ≥40 Gy predicts chronic GI morbidity after EBRT for CaP.

Higher serum carcinoembryonic antigen levels associate with more frequent development of incident fractures in Korean women: a longitudinal study using the national health insurance claim data

BACKGROUND

Pro-inflammatory cytokines play important roles in bone metabolism and several studies have shown that carcinoembryonic antigen (CEA) may promote inflammation. We investigated the association of serum CEA levels with the risk of osteoporosis and incident fracture.

METHODS

We performed a small cross-sectional study with 302 Korean women and a large, longitudinal study with 7192 Korean women in an average 3-year follow-up period. For the cross-sectional study, bone mineral density (BMD) and bone turnover markers (BTMs) were measured. For the longitudinal study, incident fractures in the follow-up period were identified by using the selected International Classification of Diseases, 10th revision (ICD-10) codes and the nationwide claims database of the Health Insurance Review and Assessment Service of Korea.

RESULTS

In the cross-sectional study, serum CEA levels correlated negatively with BMD at the lumbar spine (γ=-0.023; P=0.029) and positively with BTMs (γ=0.122 to 0.138, P=0.002 to P<0.001) after adjustment for confounding variables. In the longitudinal study, 254 (3.5%) women developed incident fractures in the follow-up period (2.8±1.3 years). After adjustment for potential confounders, the hazard ratio (HR) per 1 ng/mL increment of the baseline CEA level for the development of incident fracture was 1.22 [95% confidence interval (CI): 1.05-1.42]. The HR was markedly higher in subjects in the highest CEA quartile category compared with those in the lowest CEA quartile category (HR=1.54, 95% CI: 1.04-2.28).

CONCLUSION

Therefore, serum CEA may be a biomarker of the risk of incident fracture in postmenopausal Korean women.

Urinary metabonomics study on biochemical changes in an experimental model of chronic renal failure by adenine based on UPLC Q-TOF/MS

BACKGROUND

Chronic renal failure (CRF) is a serious clinical symptom, occurring as the end result of all kinds of chronic kidney disease and its pathophysiological mechanism is not yet well understood. We investigated the metabolic profiling of urine samples from CRF model rats to find potential disease biomarkers and research pathology of CRF.

METHODS

An animal model of CRF was produced by adenine. Metabolic profiling of the urine was performed by using ultra performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC Q-TOF/MS). Acquired data were subjected to principal component analysis (PCA) for differentiating the CRF and the normal control groups. Potential biomarkers were screened by using S-plot and were identified by the accurate mass, isotopic pattern and MS(E) fragments information obtained from UPLC Q-TOF/MS analysis.

RESULTS

12 metabolites in urine were identified as potential biomarkers. Adenine-induced CRF rats were characterized by the increase of phytosphingosine, adrenosterone, tryptophan, 2,8-dihydroxyadenine, creatinine, and dihydrosphingosine together with the decrease of N-acetylleucine, 3-O-methyldopa, ethyl-N2-acetyl-L-argininate, dopamine, phenylalanine and kynurenic acid in urine. The altered metabolites demonstrated perturbations of amino acids metabolism, phospholipids metabolism and creatinine metabolism in CRF rats.

CONCLUSION

This work shows that metabonomics method is a valuable tool in CRF mechanism study and assists in clinical diagnosis of CRF.

Ergosta-4,6,8(14),22-tetraen-3-one isolated from Polyporus umbellatus prevents early renal injury in aristolochic acid-induced nephropathy rats

Objectives

Aristolochic acid (AA) nephropathy, first reported as Chinese herbs nephropathy, is a rapidly progressive tubulointerstitial nephropathy that results in severe anemia, interstitial fibrosis and end-stage renal disease. Tubulointerstitial injury was studied in a rat model of AA nephropathy to determine whether ergosta-4,6,8(14),22-tetraen-3-one (ergone) treatment prevents early renal injury in rats with aristolochic acid I-induced nephropathy.

Methods

Early renal injury via renal interstitial fibrosis was induced in rats by administration of aristolochic acid I (AAI) solution intragastrically for 8 weeks. Ninety-six rats were randomly divided into four groups (n = 24/group): (1) control (2) AAI (3) AAI + ergone (10 mg/kg) and (4) AAI + ergone (20 mg/kg). Blood and urine samples were collected and rat were sacrificed for histological assessment of the kidneys on at the end of weeks 2, 4, 6 and 8.

Key findings

AAI caused progressive elevation of blood urea nitrogen, creatinine, potassium, sodium, chlorine, proteinuria and urinary N-acetyl-β-D-glucosaminidase (NAG). Ergone suppressed elevation of blood urea, nitrogen, creatinine, proteinuria and urinary NAG to some degree, but the AAI–ergone-treated group did not differ from AAI-treated group for body weight, serum potassium, sodium and chlorine. The progress of the lesions in the kidney after AAI administration was also observed by histopathological examinations, but kidneys from rats of AAI–ergone-treated group displayed fewer lesions.

Conclusions

Ergone treatment conferred protection against early renal injury in a rat model of AA nephropathy. Early administration of ergone may prevent the progression of renal injury and the subsequent renal fibrosis in AA nephropathy.

Indicators and methods for folate, vitamin B-12, and vitamin B-6 status assessment in humans

PURPOSE OF REVIEW

Nutritional status assessment is a critical tool for the identification of nutrient deficiencies or excesses in individual healthcare and epidemiologic screening. Because low but 'normal' status of folate, vitamin B-12, and vitamin B-6 have been associated with an increased risk of chronic diseases, research has focused on defining sensitive indicators of B-vitamin status and on the development and validation of analytical methods for their quantification.

RECENT FINDINGS

With the increasing availability and more user-friendly configuration of liquid chromatograph-tandem mass spectrometers (LC-MS/MS), numerous analytical methods for determination of B-vitamin indicators by LC-MS/MS have been developed over the last years. These methods include folate assays for simultaneous determination of numerous folate forms at their specific reduction level. The functional indicators for vitamin B-12 status are plasma methylmalonic acid and total homocysteine and can be measured, either individually or in combination, by high-throughput analysis using LC-MS/MS. Methods for vitamin B-6 status assessment are multianalyte platforms that determine vitamin B-6 forms and functional indicators by the same assay.

SUMMARY

The high sensitivity, selectivity, and specificity of isotope-dilution LC-MS/MS [and gas chromatography-mass spectrometry (GC-MS)] techniques have allowed the development of reference methods and the creation of multianalyte platforms. The additional convenience of automated sample preparation enables high sample throughput and makes those sensitive methods prospective analytical candidates for larger settings including clinical laboratories.

Plasma TIMP-1 and CEA in detection of primary colorectal cancer: a prospective, population based study of 4509 high-risk individuals

OBJECTIVE

The combination of plasma tissue inhibitor of metalloproteinases-1 (TIMP-1) and carcinoembryonic antigen (CEA) may be valuable biomarkers for early detection of colorectal cancer (CRC). A prospective, population based study was performed to validate this hypothesis.

MATERIAL AND METHODS

Individuals (n = 4509) referred for large bowel endoscopy due to symptoms of CRC were prospectively included. Baseline data and concurrent diseases were recorded. The primary endpoint was detection of CRC and findings at examinations were recorded using International Classification of Diseases-10 codes. Plasma was obtained before endoscopy and TIMP-1 and CEA levels were determined after the inclusion of all individuals.

RESULTS

Findings were based on sigmoidoscopy in 1766 and colonoscopy in 2743 individuals. Colon cancer (CC) was detected in 184 and rectal cancer in 110 individuals. Ten individuals with other cancers, 856 with adenomas and 1176 with non-neoplastic findings were also detected. The biomarker levels were increased in a variety of diseases including CRC compared to individuals without any findings at endoscopy. A multivariable analysis demonstrated that both markers were significant and independent detectors of CRC. Combining both biomarkers, independent contributions from each (TIMP-1, odds ratio (OR) = 1.8 (95% confidence interval (CI): 1.4-2.2), p < 0.0001; CEA < 5 ng/ml, OR = 1.6, 1.3-1.9, or ≥ 5 ng/ml, OR = 2.3, 95% CI: 1.9-2.7 (p < 0.0001)) were obtained. Subgroup analysis of individuals examined by colonoscopy with CC as the endpoint showed that combining both biomarkers, independent contributions from each (TIMP-1, OR = 2.5, 95% CI: 1.8-3.4, p < 0.0001; CEA < 5 ng/ml, OR = 1.4, 95% CI: 1.1-1.8, and CEA ≥ 5 ng/ml, OR = 2.3, 95% CI: 1.8-3.0 (p < 0.0001)) were obtained.

CONCLUSIONS

This prospective validation study supports the use of the combination of plasma TIMP-1 and CEA protein measurements as a potential aid in early detection of CRC and specifically of CC.

“Turnaround time”: a new parameter for the characterization of the overall efficacy of laboratory diagnostic processes

Bevezetés:A szerzők a laboratóriumi diagnosztikai tevékenység hatékonyságát jellemző paraméter, az ún. „turnaround time” meghatározására alkalmas számítógépes programot dolgoztak ki laboratóriumukban. A turnaround time a minta laboratóriumba való beérkezése és az orvosi validálást követő eredménykiadás között eltelt idő, mely jól jellemzi az eredménykiadás hatékonyságát, és ezért a laboratóriumok működésének fontos minőségügyi paramétere.Módszer:Analízisük során a sürgős, rutin- és speciális vizsgálatokat külön kezelve 6 hónap adatait dolgozták fel, és a turnaround time medián, 5- és 95-percentil értékeit adták meg. Meghatározták emellett a maximálisnak definiált turnaround time értéket (sürgős 1 óra, rutin 4 óra, speciális 2–14 nap) meghaladó turnaround time értékű vizsgálatok („kiesők”) arányát is az összes vizsgálati számra vonatkoztatva.Eredmények:A sürgős vizsgálatok esetében a medián turnaround time 9–70 perc, a rutinvizsgálatoknál pedig 33–190 perc között volt. A speciális vizsgálatok jóval heterogénebb képet mutattak, és általában megállapítható volt, hogy a kis mintaszámú, nem automatizált, immunkémiai és hemosztázis-tesztek esetében magas a turnaround time értéke és a kiesők aránya. A rutinvizsgálatok longitudinális analízise egyértelműen mutatta, hogy 2006 első félévében javultak a vizsgálatok turnaround time értékei a laboratórium valamennyi részlegén. A turnaround time hosszát befolyásoló egyik lényeges paraméter az orvosi validálás ideje, ami jelentősen csökkenthető egy autovalidáló program segítségével. A szerzők adatai alapján az autovalidálás bevezetése akár 1–2 órával is csökkentette a rutinvizsgálatok medián turnaround time értékeit. Az alkalmazott számítógépes program alkalmas akár a mintaszállítás effektivitásának jellemzésére is, amit a szerzők két különböző mintaszállítási infrastruktúrával rendelkező sürgősségi részlegük összevetésével mutattak be.Következtetések:Az itt ismertetett turnaround time analízis az általános rutin része a világ fejlettebb országaiban tevékenykedő diagnosztikai laboratóriumokban, ugyanakkor az első ilyen próbálkozást jelenti Magyarországon.

Analytical evaluation of HgbA1c, microalbumin, CRP, and RF on Architect ci8200 integrated system and workflow performance evaluation using computer simulation

BACKGROUND

Recently, hemoglobin A1c (HgbA1c), microalbumin (MA), C-reactive protein (CRP) and rheumatoid factor (RF) have been introduced on high throughput general chemistry system. We evaluated analytical performance of these assays on an integrated clinical chemistry and immunoassay analyzer and studied the impact of testing these assays on these systems on the overall efficiency of the analyzer, via computer simulation.

METHODS

The analytical performance was measured by determining precision, linearity and correlation of patient sample results with in-house testing methodology. MedModel simulation software is used to develop simulation model and process efficiency is determined by measuring turnaround times and resource utilization.

RESULTS

Between-days CVs ranged from 8.59% for MA to 3.22% for HgbA1c level 1 controls. Less than 2% carryover for all 4 methods was observed on the integrated analyzer. For HgbA1c on HPLC analyzer, the minimum and maximum TAT for a batch of 50 samples was 3.78 and 160 min, respectively, while for the integrated system it was 28.2 and 35.1 min, respectively. Labor utilization for the 2 processes ranged from 3.21% to 3.75%.

CONCLUSION

Chemistry module on an integrated system can be used to determine the HgbA1c and other serum proteins.