A catalysis study of mesoporous MCM-41 supported Schiff base and CuSO4·5H2O in a highly regioselective synthesis of 4-thiazolidinone derivatives from cyclocondensation of mercaptoacetic acid

Application of a novel deep eutectic solvent as a capable and new catalyst for the synthesis of tetrahydropyridines and 1,3-thiazolidin-4-ones

A novel deep eutectic solvent (ETPP-Br/THF-TCA-DES) was prepared by a mixture of ethyl triphenylphosphonium bromide (ETPP-Br) and tetrahydrofuran-2,3,4,5-tetra-carboxylic acid (THF-TCA, mole ratio 7:3), characterized by FT-IR, TGA/DTA, densitometer, eutectic point, and ¹H NMR techniques and used as a capable and new catalyst for the synthesis of two sets of compounds: (1) the four new [a(1-4)] and the eleven [a(5-15)] known alkyl 1,2,6-trisubstituted-4-[(hetero)arylamino]-1,2,5,6-tetrahydropyridine-3-carboxylates and (2) the two new [b(1-2)] and the eight [b(3-10)] known 1,3-thiazolidin-4-ones in DES with short reaction time, high yields, and easy recycling and separation of the DES catalyst. There is a nice consistency between the proposed structure of the DES compound, the integration values of the ¹H NMR peaks and the ratio of ETPP-Br to THF-TCA obtained from the eutectic point phase diagram. Also, the decrease in splitting patterns of the peaks in DES, compared to the two starting materials can be the good evidence of the hydrogen bond formation between the two components.

Synthesis and application of novel urea-benzoic acid functionalized magnetic nanoparticles for the synthesis of 2,3-disubstituted thiazolidin-4-ones and hexahydroquinolines

In this work, we reported the synthesis and application of a new urea-benzoic acid containing ligand [(OEt)3Si(CH2)3-urea-benzoic acid] for the functionalization of silica coated magnetic nanoparticles. The resulting structure, namely Fe3O4@SiO2@(CH2)3-urea-benzoic acid, was characterized through different techniques including FT-IR, SEM, EDX-Mapping, VSM and TGA/DTG analysis. Then, Fe3O4@SiO2@(CH2)3-urea-benzoic acid was applied as a heterogeneous dual acidic and hydrogen bonding catalyst for the synthesis of 2,3-disubstituted thiazolidin-4-ones and hexahydroquinolines under mild and green reaction conditions. More importantly, all of the desired products were obtained with relatively good yields. Also, the catalyst was recovered and reused for four successive runs without significant reduction in yield of the model reaction.

An Efficient One-Pot, Multicomponent Synthesis of 1, 3-Thiazolidin-4- Ones Using L-Proline as Catalyst in Water

:

An efficient methodology for the synthesis of 1,3-thiazolidin-4-ones using L-Proline as catalyst under aqueous conditions has been developed. The one-pot, multicomponent reaction of aromatic/heterocyclic aldehyde, aromatic amine and thioglycolic acid at room temperature give 1,3-thiazolidin-4-ones in moderate to good yields. Further, the current approach is notably greener than traditional methods with E-factor of 3.1 and the eco scale score of 96. The developed protocol offers several features, such as being simple, environmentally benign, energy-efficient, economical, mild conditions, shorter reaction time.

Pd Doped on TCH@SBA-15 Nanocomposites: Fabrication and Application as a New Organometallic Catalyst in the Three-Component Synthesis of N-Benzo-imidazo- or -thiazole-1,3-thiazolidinones

In this study, Pd(II)/TCH@SBA-15 nanocomposites were synthesized by the grafting of 3-chloropropyltriethoxysilane and thiocarbohydrazide on SBA-15 and subsequent deposition of palladium acetates through the ligand-metal coordination method. The structure and morphology of this nanoporous nanocomposite was thoroughly identified by Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, thermogravimetric analysis, atomic absorption spectroscopy, and Brunauer-Emmett-Teller instrumental analyses. Furthermore, the catalytic activity of this nanocomposite was investigated in the three-component synthesis of 3-benzimidazolyl or benzothiazoleyl-1,3-thiazolidin-4-ones via a reaction of 2-aminobenzimidazole or 2-aminobenzothiazole, aromatic aldehydes, and thioglycolic acid in an acetone-H2O mixture under green conditions. The Pd/TCH@SBA-15 nanocatalyst is demonstrated to exhibit a high catalyzing activity in the three-component reaction of the synthesis of N-heterocyclic thiazolidinones with good to excellent yields. One of the advantages of the suggested method is the direct application of the thiocarbohydrazide ligand to stabilize Pd nanoparticles through formation of a stable ring complex without creating an additional Schiff base step. Moreover, this organometallic nanocatalyst can be recycled several times with no notable leaching or loss of performance.

Design of a new multi-functional catalytic system Ni/SO3H@zeolite-Y for three-component synthesis of N-benzo-imidazo- or -thiazole-1,3-thiazolidinones

In this investigation, a nanoporous zeolite-NaY supported sulfonic acid was synthesized and Ni(ii) ions were successfully stabilized on SO₃H@zeolite-Y (Ni/SO₃H@zeolite-Y). This novel type of zeolitic nanocomposite was characterized using various techniques including FT-IR, FE-SEM, TGA, BET and EDX. Ni/SO₃H@zeolite-Y was used as a multi-functional and highly active nanocatalyst for the three-component synthesis of 3-benzimidazolyl-1,3-thiazolidin-4-ones and new 3-benzthiazoleyl-1,3-thiazolidin-4-ones via cyclocondensation of 2-aminobenzimidazole or 2-aminobenzothiazole, aromatic aldehydes and thioglycolic acid in acetone-H₂O at room temperature. This economical chemical procedure has advantages such as excellent yield in short reaction times, convenient manipulation and high purity of products, applicability to a broad range of substrates, and the use of a nontoxic and heterogeneous acid catalyst with good reusability.

SO3H-functionalized Zeolite-Y as an Efficient Nanocatalyst for the Synthesis of Nbenzimidazole- 2-aryl-4-thiazolidinones and tri-substituted Imidazoles

BACKGROUND

SO3H-functionalized zeolite-Y was prepared and used as a catalyst for the synthesis of 2-aryl-N-benzimidazole-4-thiazolidinones and tri-substituted imidazoles at ambient conditions.

OBJECTIVE

The goals of this catalytic method include excellent yields and high purity, inexpensive procedure and ease of product isolation, the use of nontoxic and heterogeneous acid catalyst, shorter reaction times and milder conditions.

MATERIALS AND METHODS

NMR spectra were recorded on Brucker spectrophotometer using Me4Si as internal standard. Mass spectra were recorded on an Agilent Technology 5975C VL MSD with tripe-axis detector. FTIR spectra were obtained with KBr disc on a galaxy series FT-IR 5000 spectrometer. The surface morphology of nanostructures was analyzed by FE-SEM (EVO LS 10, Zeiss, Carl Zeiss, Germany). BET analysis were measured at 196 °C by a Japan Belsorb II system after the samples were vacuum dried at 150°C overnight.

RESULTS

The NSZ was characterized by FT-IR, FESEM, EDX, XRF, and BET. The catalytic activity of NSZ was investigated for synthesis of 1,3-tiazolidin-4-ones in H2O/Acetone at room temperature. Moreover, NSZ was used for synthesis of tri-substituted imidazoles at 60 °C via solvent-free condensation. Different kinds of aromatic aldehydes were converted to the corresponding of products with good to excellent yields.

CONCLUSION

Sulfonated zeolite-Y was as an efficient catalyst for the preparation of N-benzimidazole-2-aryl-1,3- thiazolidin-4-ones and 2,4,5-triaryl-1H-imidazoles. High reaction rates, elimination toxic solvent, simple experimental procedure and reusability of the catalyst are the important features of this protocol.

Crystal structure of meso-3,3'-(1,4-phenyl-ene)bis-(2-phenyl-2,3,5,6-tetra-hydro-4H-1,3-thia-zin-4-one)

The crystal structure of the title compound - meso-C26H24N2O2S2 with two stereocenters - has half the mol-ecule in the asymmetric unit with the other half generated by a crystallographic center of inversion. The thia-zine ring is in a conformation that is between half-chair and envelope [θ = 52.51 (17)°]. The phenyl ring on the 2-carbon atom of the thia-zine ring is pseudo-axial. The central phenyl ring of the mol-ecule is close to orthogonal to the phenyl rings on either side with an angle of 76.85 (11)° between those planes. In the crystal, pairwise, weak C-H⋯O hydrogen bonds between the central phenyl ring and the oxygen atoms of neighboring mol-ecules result in continuous strips propagating along the a-axis direction. Hydro-phobic inter-actions of the C-H⋯π type are also observed.

Miniaturized solid-phase extraction of macrolide antibiotics in honey and bovine milk using mesoporous MCM-41 silica as sorbent

A simple and effective method of miniaturized solid-phase extraction (mini-SPE) was developed for the simultaneous purification and enrichment of macrolide antibiotics (MACs) (i.e. azithromycin, clarithromycin, erythromycin, lincomycin and roxithromycin) from honey and skim milk. Mesoporous MCM-41 silica was synthesized and used as sorbent in mini-SPE. Several key parameters affecting the performance of mini-SPE procedure were thoroughly investigated, including sorbent materials, amount of sorbent and elution solvents. Under the optimized condition, satisfactory linearity (r² > 0.99), acceptable precision (RSDs, 0.3-7.1%), high sensitivity (limit of detection in the range of 0.01-0.76 μg/kg), and good recoveries (83.21-105.34%) were obtained. With distinct advantages of simplicity, reliability and minimal sample requirement, the proposed mini-SPE procedure coupled with ultrahigh performance liquid chromatography and quadrupole time-of-flight tandem mass spectrometry could become an alternative tool to analyze the residues of MACs in complex food matrixes.

MCM-41-Accelerated PWA Catalysis of Friedel-Crafts Reaction of Indoles and Isatins

Ordered mesoporous siliceous material has been identified as one of the key elements of the catalysis concept. Here we report an efficient Friedel-Crafts reaction of indoles with isatins catalyzed by PWA/MCM-41, which got the di(indolyl)indolin-2-ones derivatives with high yield. Moreover, the catalysts were characterized by XRD and SEM/EDS, the EDS spectrum indicated that the catalyst used in this reaction also contains tungsten, and the proposed mechanism for the synthesis of 3,3-di(indolyl)indolin-2-ones was also discussed. Finally, the catalyst can be reused repeatedly for several times without obvious loss of activity.

Catalyst-free and environment friendly synthesis of 2-aryl-3-substituted-4-thiazolidinones in water

A simple, efficient, eco-friendly, and cost-effective method has been developed for the three component one pot synthesis of 2-aryl-3-substituted-4-thiazolidinones is described.