A colorimetric and ratiometric fluorescent chemosensor based on furan-pyrene for selective and sensitive sensing Al3+

Chromogenic Chemosensor for Simultaneous Detection of PO4 3- and CO3 2- Anions in Organo-Aqueous Solutions: Application in Arduino Based Electronic Color Sensor Device and Logic Gate

Three new chromogenic receptors have been synthesized with the primary objective of facilitating the selective recognition of PO4 3-and CO3 2- ions in an organo-aqueous medium. R1 and R2 exhibit an extraordinary detection limit aligning with both EPA and WHO guidelines. R1 shows LOD of 0.135 ppm for PO4 3- and 0.175 ppm for CO3 2-, while R2 sets forth a LOD of 0.427 ppm for PO4 3- and 0.729 ppm for CO3 2-. The binding mechanism involves intramolecular charge transfer (ICT) band are substantiated by comprehensive studies that include UV-Vis titration, 1H-NMR titration, DFT studies and electrochemical studies. Chemosensors were employed in the formulation of logic gate, the fabrication of a paper strip test kit and its application in RGB color sensor device.

Recent Advancements and Future Prospects in NBD-Based Fluorescent Chemosensors: Design Strategy, Sensing Mechanism, and Biological Applications

In recent years, the field of Supramolecular Chemistry has witnessed tremendous progress owing to the development of versatile optical sensors for the detection of harmful biological analytes. Nitrobenzoxadiazole (NBD) is one such scaffold that has been exploited as fluorescent probes for selective recognition of harmful analytes and their optical imaging in various cell lines including HeLa, PC3, A549, SMMC-7721, MDA-MB-231, HepG2, MFC-7, etc. The NBD-derived molecular probes are majorly synthesized from the chloro derivative of NBD via nucleophilic aromatic substitution. This general NBD moiety ligation method to nucleophiles has been leveraged to develop various derivatives for sensing analytes. NBD-derived probes are extensively used as optical sensors because of remarkable properties like excellent stability, large Stoke's shift, high efficiency and stability, visible excitation, easy use, low cost, and high quantum yield. This article reviewed NBD-based probes for the years 2017-2023 according to the sensing of analyte(s), including cations, anions, thiols, and small molecules like hydrogen sulfide. The sensing mechanism, designing of the probe, plausible binding mechanism, and biological application of chemosensors are summarized. The real-time application of optical sensors has been discussed by various methods, such as paper strips, molecular logic gates, smartphone detection, development of test kits, etc. This article will update the researchers with the in vivo and in vitro biological applicability of NBD-based molecular probes and challenges the research fraternity to design, propose, and develop better chemosensors in the future possessing commercial utility.

Pyrene Appendant Triazole-based Chemosensors for Sensing Applications

Over the last two decades, the design and development of fluorescent chemosensors for the targeted detection of Heavy Transition-metal (HTM) ions, anions, and biological analytes, have drawn much interest. Since the introduction of click chemistry in 2001, triazole moieties have become an increasingly prominent theme in chemosensors. Triazoles generated via click reactions are crucial for sensing various ions and biological analytes. Recently, the number of studies in the field of pyrene appendant triazole moieties has risen dramatically, with more sophisticated and reliable triazole-containing chemosensors for various analytes of interest described. This tutorial review provides a general overview of pyrene appendant-triazole-based chemosensors that can detect a variety of metal cations, anions, and neutral analytes by using modular click-derived triazoles.

Schiff Base Compounds as Fluorescent Probes for the Highly Sensitive and Selective Detection of Al3+ Ions

Two new Schiff base fluorescent probes (L and S) were designed for selectively detecting Al3+ ions in aqueous medium. Structural characterization of the purely synthesized compounds was acquired by IR, 1H NMR and 13C NMR. Moreover, their photochromic and fluorescent behaviors have been investigated systematically by UV–Vis absorption and fluorescence spectra. The two probes have both high selectivity and sensitivity toward Al3+ ions in aqueous medium. The 2:1 stoichiometry between the Al3+ and probes was verified by Job’s plot. Moreover, the limits of detection (LOD) for Al3+ by L and S were 1.98 × 10−8 and 4.79 × 10−8 mol/L, respectively, which was much lower than most previously reported probes. The possible recognition mechanism was that the metal ions would complex with Schiff base probes because of the prevalence of the species optimal for complex formation, inhibiting the structural isomerization of conjugated double bonds (-C=N-), inhibiting the proton transfer process in the excited state of the molecules and resulting in changes of its color and fluorescence behavior. Furthermore, the probes will have potential applications for selectively, detecting Al3+ ions in the environmental system with high accuracy and providing a new strategy for the design and synthesis of multi-functional sensors.

Synthesis and Characterization of a Carbazole-Based Schiff Base Capable of Detection of Al3+ in Organic/Aqueous Media

A new fluorescence probe (L) selectively detecting Al³⁺ ions was synthesized via the condensation reaction, and characterized using UV-Vis, FT-IR, ¹H-NMR and ¹³C-NMR spectroscopic techniques. The limit of detection for Al³⁺ ions of this synthesized probe was found to be 9.29 × 10^-7 M, while the Ka constant value was determined to be 1.64 × 10⁴ M^-1. The stoichiometric binding ratio of L-Al³⁺ was found to be 2:1 using the Job's plot method, and this ratio was also confirmed by ¹H-NMR titration and mass spectrometry. The recyclability of the chemosensor was found by the fluorescence method through the addition of EDTA to the L-Al³⁺ solution. The obtained data showed that the carbazole-based Schiff base acted as an ideal chemosensor for Al³⁺. Carbazole-based Schiff base as a fluorescent sensor for detection of Al³⁺ was synthesized and characterized. The association constant (K_a) was calculated to be 1.64 × 10⁴ M^-1 and the limit of detection (LOD) value was determined to be 9.29 × 10^-7 M. It was determined that th Schiff base was bound to Al³⁺ ions in 2:1 stoichiometric ratio. In the presence of other competitive metal cations, the selectivity of sensor L to Al³⁺ was not significantly affected.

Selective sensing of PPi by fluorogenic Al(III)-probe complex in aqueous medium

A newly designed Schiff base probe JN has been synthesized. It is highly selective and sensitive towards Al³⁺ in nearly 100% aqueous medium by exhibiting a dramatic "turn-on" fluorescence response at 495 nm (λ_ex = 450 nm). The sensing mechanism of JN towards Al³⁺ ions was proposed as the combination of PET, ICT, ESIPT, and CHEF processes according to spectra studies and theory calculations. The in situ generated mononuclear Al(III) complex JN-Al³⁺ could sequentially detect PPi ions by turn-off fluorescence response. The selectivity and sensitivity of the JN-Al³⁺ complex towards PPi ions are based on demetalization process. Interestingly, the fact that Al³⁺ can bind with 1, 2, or 3 PPi has been revealed by HRMS study. The probes JN and JN-Al³⁺ complexes were able to capture Al³⁺ and PPi ions, respectively, as demonstrated by fluorescence imaging of the adult zebrafish and onion inner epidermal cells samples.

Carbon Dots Fluorescence-Based Colorimetric Sensor for Sensitive Detection of Aluminum Ions with a Smartphone

In this work, blue emission carbon dots (CDs) are synthesized in the one-pot solvothermal method using naringin as precursor. The CDs are used to develop a ratiometric fluorescence sensor for the sensitive analysis of Al3+ with a detection limit of 113.8 nM. A fluorescence emission peak at 500 nm gradually appears, whereas the original fluorescence peak at 420 nm gradually decreases upon the increase in the Al3+ concentration. More importantly, the obvious color change of the CDs probe from blue to green under a 360 nm UV lamp can be identified by a smartphone and combined with the RGB (red/green/blue) analysis. This results in a visual and sensitive analysis of Al3+ with a detection limit of 5.55 μM. Moreover, the high recovery is in the 92.46–104.10% range, which demonstrates the high accuracy of this method for actual samples’ analysis. The use of a smartphone and the RGB analysis greatly simplifies the operation process, saves equipment cost, shortens the detection time, and provides a novel method for the instant, on-site, visual detection of Al3+ in actual samples.

FRET based ratiometric switch for selective sensing of Al3+ with bio-imaging in human peripheral blood mononuclear cells

FRET based ratiometric switch for selective sensing of Al³⁺ with bio-imaging in human peripheral blood mononuclear cells (PBMCs).

A Highly Selective Turn-on and Reversible Fluorescent Chemosensor for Al3+ Detection Based on Novel Salicylidene Schiff Base-Terminated PEG in Pure Aqueous Solution

The development of highly selective and sensitive chemosensors for Al³⁺ detection in pure aqueous solution is still a significant challenge. In this work, a novel water-soluble polymer PEGBAB based on salicylidene Schiff base has been designed and synthesized as a turn-on fluorescent chemosensor for the detection of Al³⁺ in 100% aqueous solution. PEGBAB exhibited high sensitivity and selectivity to Al³⁺ over other competitive metal ions with the detection limit as low as 4.05 × 10⁻⁹ M. PEGBAB displayed high selectivity to Al³⁺ in the pH range of 5–10. The fluorescence response of PEGBAB to Al³⁺ was reversible in the presence of ethylenediaminetetraacetic acid (EDTA). Based on the fluorescence response, an INHIBIT logic gate was constructed with Al³⁺ and EDTA as two inputs. Moreover, test strips based on PEGBAB were fabricated facilely for convenient on-site detection of Al³⁺.

A highly sensitive and selective fluorescent probe for quantitative detection of Al3+ in food, water, and living cells

Three novel β-pinene-based fluorescent probes 2a–2c were designed and synthesized for the selective detection of Al³⁺. Probe 2a showed higher fluorescence intensity toward Al³⁺ than the other two compounds. Probe 2a determined the concentration of Al³⁺ with a rapid response time (45 s), wide pH range (pH = 1–9), excellent sensitivity (LOD = 8.1 × 10⁻⁸ M) and good selectivity. The recognition mechanism of probe 2a toward Al³⁺ was confirmed by ¹H NMR, HRMS and DFT analysis. Probe 2a was successfully used as a signal tool to quantitatively detect Al³⁺ in food samples and environmental water samples. Furthermore, probe 2a was successfully utilized to label intracellular Al³⁺, indicating its promising applications in living cells.

Probe 2a exhibiting high sensitivity, good selectivity, wide pH range, lower detection limit, and rapid detection for Al³⁺, probe 2a was applied for the successful detection of Al³⁺ in water samples, food samples and HeLa cells.

Fabrication of Sb3+sensor based on 1,1′-(-(naphthalene-2,3-diylbis(azanylylidene))bis(methanylylidene))bis(naphthalen-2-ol)/nafion/glassy carbon electrode assembly by electrochemical approach

A new Schiff base named 1,1′-(-(naphthalene-2,3-diylbis(azanylylidene))bis(methanylylidene))bis(naphthalen-2-ol) (NDNA) was synthesized by condensation reaction and then characterized by spectroscopic techniques for structure elucidation.

Fluorescence “off” and “on” signalling of esculetin in the presence of copper and thiol: a possible implication in cellular thiol sensing

The fluorescence intensity of esculetin was drastically reduced in the presence of a copper ion, which was regenerated in the presence of GSH. The copper–esculetin system was able to detect GSH in a cellular model.

Sensitive ratiometric detection of Al(iii) ions in a 100% aqueous buffered solution using a fluorescent probe based on a peptide receptor

The peptidyl bioprobe detected Al(iii) ions sensitively in a 100% aqueous buffered solution through ratiometric response.

FRET based selective and ratiometric detection of Al(iii) with live-cell imaging

A cell permeable FRET based platform for dual mode ‘naked-eye’in vitroandin vivodetection of Al³⁺over other common ions (including trivalent ions).