Metal-organic frameworks-derived hierarchical ZnO structures as efficient sensing materials for formaldehyde detection

Hierarchically porous ZnO derived from zeolitic imidazolate frameworks for high-sensitive MEMS NO2 sensor

Three-dimensional (3D) porous metal oxide nanomaterials with controllable morphology and well-defined pore size have attracted extensive attention in the field of gas sensing. Herein, hierarchically porous ZnO-450 was obtained simply by annealing Zeolitic Imidazolate Frameworks (ZIF-90) microcrystals at an optimal temperature of 450 °C, and the effect of annealing temperature on the formation of porous nanostructure was discussed. Then the as-obtained ZnO-450 was employed as sensing materials to construct a Micro-Electro-Mechanical System (MEMS) gas sensor for detecting NO2. The MEMS sensor based on ZnO-450 displays the excellent gas-sensing performances at a lower working temperature (190 °C), such as high response value (242.18% @ 10 ppm), fast response/recovery time (9/26 s) and ultralow limit of detection (35 ppb). The ZnO-450 sensor shows better sensing performance for NO2 detection than ZnO-based composites materials or commercial ZnO nanoparticles (NPs), which are attributed to its unique hierarchically structures with high porosity and larger surface area. This ZIFs driven strategy can be expected to pave a new pathway for the design of high-performance NO2 sensors.

In Situ-Derived N-Doped ZnO from ZIF-8 for Enhanced Ethanol Sensing in ZnO/MEMS Devices

Microelectromechanical systems (MEMS) gas sensors have numerous advantages such as compact size, low power consumption, ease of integration, etc., while encountering challenges in sensitivity and high resistance because of their low sintering temperature. This work utilizes the in situ growth of Zeolitic Imidazolate Framework-8 (ZIF-8) followed by its conversion to N-doped ZnO. The results obtained from scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicate that the in situ derivation of ZIF-8 facilitates the adhesion of ZnO particles, forming an island-like structure and significantly reducing the interfaces between these particles. Furthermore, powder X-ray diffraction (XRD) analysis, elemental mapping, and X-ray photoelectron spectroscopy (XPS) analysis confirm the conversion of ZIF-8 to ZnO, the successful incorporation of N atoms into the ZnO lattice, and the creation of more oxygen vacancies. The ZIF-8-derived N-doped ZnO/MEMS sensor (ZIF (3)-ZnO/MEMS) exhibits remarkable gas sensitivity for ethanol detection. At an operating temperature of 290 °C, it delivers a substantial response value of 80 towards 25 ppm ethanol, a 13-fold enhancement compared with pristine ZnO/MEMS sensors. The sensor also exhibits an ultra-low theoretical detection limit of 11.5 ppb to ethanol, showcasing its excellent selectivity. The enhanced performance is attributed to the incorporation of N-doped ZnO, which generates abundant oxygen vacancies on the sensor's surface, leading to enhanced interaction with ethanol molecules. Additionally, a substantial two-order-of-magnitude decrease in the resistance of the gas-sensitive film is observed. Overall, this study provides valuable insights into the design and fabrication strategies applicable to high-performance MEMS gas sensors in a broader range of gas sensing.

Towards an E-nose: Metal-organic frameworks based quartz crystal microbalance array for fruit ripeness indexing

Ethylene is a hormone for fruit ripening control, and for the purpose of maintaining plant quality, ethylene monitoring is crucial. Due to the simple structure and limited functionality, the technical realization of ethylene detection by an artificial sensor remains a challenge. In this paper, we present a metal-organic frameworks (MOFs) array based electronic nose (e-nose) for rapid and accurate determination of ethylene. Six zirconium-based MOFs with systematically modified pore sizes and π-π binding sites have been prepared and fabricated into a sensor array using quartz crystal microbalance (QCM) technology. By virtue of the synergistic features of six MOF sensors, selectivity detection of ethylene has been achieved. The detection limit reaches to 0.27 ± 0.02 ppm, and high selectivity and stability (98.29 % ± 0.88 %) could also be confirmed. By submitting data to machine learning algorithm, an e-nose system could be established for discriminating ethylene from mixtures with a qualitative accuracy of 90.30 % and quantitative accuracy of 98.89 %. Practical evaluation suggests that the e-nose could index the fruit quality based on the accurate detection of ethylene released during fruit ripeness. This work demonstrates the promising potential of fabricating MOFs based e-nose systems for practical monitoring applications by selectively detecting challengeable target molecules.

Metal-organic frameworks-derived In2O3/ZnO porous hollow nanocages for highly sensitive H2S gas sensor

The detection of hydrogen sulfide (H₂S) is critical because of its potential harm and widespread presence in the oil and gas sectors. The zeolitic imidazolate framework-8 (ZIF-8) derived ZnO nanostructures manufactured as gas sensors have exceptional sensitivity and selectivity for H₂S gas. In/Zn-ZIF-8 template material was synthesized by a simple one-step co-precipitation method followed by thermal annealing in air. The heat treatment resulted in In₂O₃/ZnO nanostructures with mixed heterostructures. The crystal structure (XRD), morphology (SEM/TEM), chemical state (XPS), surface area (BET), etc were investigated to ascertain the nature of the as-prepared material. SEM imagery revealed that the as-prepared In₂O₃/ZnO sensitive material had a microstructure of porous hollow nanocages with an average particle size of about 200 nm, which is beneficial to the diffusion and adsorption of gas molecules. The gas sensing performance test results of the In₂O₃/ZnO hollow nanocages show that their response to H₂S gas is significantly improved 67.5 @50 ppm H₂S (about 11 times that of pure ZnO nanocages) at an optimal temperature of 200 °C, better selectivity, lower theoretical detection limit and good linearity between gas concentration and response values. The enhanced gas sensing feat to H₂S gas is mainly attributed to the formation of n-n heterojunction and the wide surface area of the newly formed In₂O₃/ZnO porous hollow nanocages.

Metal–Organic Frameworks Meet Metallic Oxide on Carbon Fiber: Synergistic Effect for Enhanced Photodegradation of Antibiotic Pollutant

Photodegradation shows a potential strategy for alleviating the excessive antibiotics crisis. The synergistic effect of various metal compounds immobilized on conductive substrates has been considered for wastewater treatment. However, developing a facile and universal approach for rational design and enhancing photocatalytic properties has endured extreme challenges. Herein, we develop a strategy to facilitate the photocatalytic reactions by designing a composite architecture of ZIF–8 ligand binding to the in–situ synthesis ZnO seed layer on carbon fiber. In this architecture, the dissolution and release of the seed layer in the excessive 2–Methylimidazole methanol solution were used as the binder to enhance the interplay between organic ligand and substrate. As an evaluated system for antibiotic contaminants, the photodegradation of tetracycline hydrochloride was performed with a removal efficiency of 88.47% (TC = 50 mg/L, pH = 4, 0.08 g of photocatalyst, illumination within 100 min). Moreover, the photocatalyst exhibited a steady photocatalytic activity (75.0%) after five cycles. The present work demonstrated a strategy for enhancing the photocatalytic performances of carbon fiber and accordingly provided useful perception into the design of the synergistic structure.

MOF-Derived Porous Hollow Co3O4@ZnO Cages for High-Performance MEMS Trimethylamine Sensors

Trimethylamine (TMA) sensors based on metal oxide semiconductors (MOS) have drawn great attention for real-time seafood quality evaluation. However, poor selectivity and baseline drift limit the practical applications of MOS TMA sensors. Engineering core@shell heterojunction structures with accumulation and depletion layers formed at the interface is regarded as an appealing way for enhanced gas sensing performances. Herein, we design porous hollow Co₃O₄@ZnO cages via a facile ZIF-67@ZIF-8-derived approach for TMA sensors. These sensors demonstrate great TMA resistive sensing performance (linear response at moderate TMA concentrations (<33 ppm)), and a high sensitivity of ∼41 is observed when exposed to 33 ppm TMA, with a response/recovery time of only 3/2 s. This superior performance benefits from the Co₃O₄@ZnO porous hollow structure with maximum heterojunctions and high surface area. Furthermore, great capacitive TMA sensing with linear sensitivity over the full testing concentration range (0.33-66 ppm) and better baseline stability were investigated. A possible capacitive sensing mechanism of TMA polarization was proposed. For practical usage, a portable sensing prototype based on the Co₃O₄@ZnO sensor was fabricated, and its satisfactory sensing behavior further confirms the potential for real-time TMA detection.

Ethanol Sensing Properties and First Principles Study of Au Supported on Mesoporous ZnO Derived from Metal Organic Framework ZIF-8

It is of great significance to develop ethanol sensors with high sensitivity and low detection temperature. Hence, we prepared Au-supported material on mesoporous ZnO composites derived from a metal-organic framework ZIF-8 for the detection of ethanol gas. The obtained Au/ZnO materials were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (SEM), field emission transmission electron microscopy (TEM) and nitrogen adsorption and desorption isotherms. The results showed that the Au/ZnO-1.0 sample maintains a three-dimensional (3D) dodecahedron structure with a larger specific surface area (22.79 m² g⁻¹) and has more oxygen vacancies. Because of the unique ZIF structure, abundant surface defects and the formation of Au-ZnO Schottky junctions, an Au/ZnO-1.0 sensor has a response factor of 37.74 for 100 ppm ethanol at 250 °C, which is about 6 times that of pure ZnO material. In addition, the Au/ZnO-1.0 sensor has good selectivity for ethanol. According to density functional theory (DFT) calculations, the adsorption energy of Au/ZnO for ethanol (−1.813 eV) is significantly greater than that of pure ZnO (−0.217 eV). Furthermore, the adsorption energy for ethanol is greater than that of other gases.