Metal-organic framework derived Co3O4/PPy bifunctional electrocatalysts for efficient overall water splitting

Immersion-Driven Structural Evolution of NiFeS Nanosheets for Efficient Water Splitting

The development of low-cost, highly active, and stable electrocatalytic water-splitting catalysts is crucial to solving the current energy crisis and environmental pollution. Herein, a simple two-step conversion strategy is proposed to successfully prepare NiFeS nanosheet structure catalyst through the "immersion-sulfurization" strategy. The self-supported electrode can be prepared in large quantities due to its simple preparation process. As an active substance, NiFeS can grow directly on the NiFe foam substrate, avoiding the use of adhesives or conductive agents, and directly used as electrodes. The as-obtained NiFeS/NFF-300 displays efficient catalytic activity in electrocatalytic water splitting. The overpotential required for OER of the NiFeS/NFF-300 electrode at a current density of 10 mA cm-2 is 230 mV. The electrode underwent a stability test at 10 mA cm-2 for 24 h, and the overpotential remained essentially unchanged, demonstrating excellent stability. Moreover, NiFeS/NFF-300 exhibits considerable HER performances compared with NiFeC2O4/NFF and NiFe foam. The unique nanosheet structure and the presence of Niδ+ and Ni2+ formed by NiFe foam substrate on the NiFeS surface are responsible for its excellent electrocatalytic activity.

OER catalytic performance of a composite catalyst comprising multi-layer thin flake Co3O4 and PPy nanofibers

The oxygen evolution reaction (OER) plays a crucial role in energy conversion and storage processes, highlighting the significance of searching for efficient and stable OER catalysts. In this study, we have developed a composite catalyst, PPy@Co3O4, with outstanding catalytic performance for the OER. The catalyst was constructed by integrating multi-layer thin flake Co3O4 with attached PPy nanofibers, utilizing the rich active sites of Co3O4 and the flexibility and tunability of PPy nanofibers to optimize the catalyst structure. Through comprehensive characterization and performance evaluation, our results demonstrate that the PPy@Co3O4 (0.1 : 1) catalyst exhibits remarkable OER catalytic activity and stability. This research provides new strategies and insights for the development of efficient and stable OER catalysts, holding promising prospects for energy conversion and storage applications in relevant fields.

Turning waste into valuables: In situ deposition of polypyrrole on the obsolete mask for Cr(VI) removal and desalination

The global mask consumption has been exacerbated because of the coronavirus disease 2019 (COVID-19) pandemic. Simultaneously, the traditional mask disposal methods (incineration and landfill) have caused serious environmental pollution and waste of resources. Herein, a simple and green mass-production method has been proposed to recycle carbon protective mask (CPM) into the carbon protective mask/polydopamine/polypyrrole (CPM/PDA/PPy) composite by in situ polymerization of PPy. The CPM/PDA/PPy composite was used for the removal of Cr(VI) and salt ions to produce clean water. The synergistic effect of PPy and the CPM improved the removal capability of Cr(VI). The CPM/PDA/PPy composite provided high adsorption capacity (358.68 mg g^-1) and economic value (811.42 mg $^-1). Consequently, the CPM/PDA/PPy (cathode) was combined with MnO₂ (anode) for desalination in CDI cells, demonstrated excellent desalination capacity (26.65 mg g^-1) and ultrafast salt adsorption rate (6.96 mg g^-1 min^-1), which was higher than conventional CDI cells. Our work proposes a new low-carbon strategy to recycle discarded masks and demonstrates their utilization in Cr(VI) removal and seawater desalination.

Controlled synthesis of Crx-FeCo2P nanoarrays on nickel foam for overall urea splitting

Urea splitting is a highly promising technology for hydrogen production to cope with the fossil energy crisis, which requires the development of catalysts with high electrocatalytic activity. In this article, Cr_x-FeCo₂P/NF catalysts were synthesized by hydrothermal and low-temperature phosphorylation and used in the overall urea splitting process. Cr_0.15-FeCo₂P/NF and Cr_0.1-FeCo₂P/NF exhibited excellent urea oxidation reaction (UOR) activity (potential of 1.355 V at 100 mA cm^-2) and hydrogen evolution reaction (HER) activity (overpotential of 173 mV at 10 mA cm^-2) in 0.5 M urea solution containing 1 M KOH. In the assembled Cr_0.15-FeCo₂P/NF//Cr_0.1-FeCo₂P/NF electrolytic cell, only a small voltage of 1.50 V is needed to reach 10 mA cm^-2. Density functional theory (DFT) calculation results demonstrate that an appropriate amount of Cr doping accelerates the kinetic performance of hydrogen production as well as improving the metallic properties of the electrode.

Recent Advances and Future Perspectives of Metal-Based Electrocatalysts for Overall Electrochemical Water Splitting

Recently, the growing demand for a renewable and sustainable fuel alternative is contingent on fuel cell technologies. Even though it is regarded as an environmentally sustainable method of generating fuel for immediate concerns, it must be enhanced to make it extraordinarily affordable, and environmentally sustainable. Hydrogen (H₂ ) synthesis by electrochemical water splitting (ECWS) is considered one of the foremost potential prospective methods for renewable energy output and H₂ society implementation. Existing massive H₂ output is mostly reliant on the steaming reformation of carbon fuels that yield CO₂ together with H₂ and is a finite resource. ECWS is a viable, efficient, and contamination-free method for H₂ evolution. Consequently, developing reliable and cost-effective technology for ECWS was a top priority for scientists around the globe. Utilizing renewable technologies to decrease total fuel utilization is crucial for H₂ evolution. Capturing and transforming the fuel from the ambient through various renewable solutions for water splitting (WS) could effectively reduce the need for additional electricity. ECWS is among the foremost potential prospective methods for renewable energy output and the achievement of a H₂ -based economy. For the overall water splitting (OWS), several transition-metal-based polyfunctional metal catalysts for both cathode and anode have been synthesized. Furthermore, the essential to the widespread adoption of such technology is the development of reduced-price, super functional electrocatalysts to substitute those, depending on metals. Many metal-premised electrocatalysts for both the anode and cathode have been designed for the WS process. The attributes of H₂ and oxygen (O₂ ) dynamics interactions on the electrodes of water electrolysis cells and the fundamental techniques for evaluating the achievement of electrocatalysts are outlined in this paper. Special emphasis is paid to their fabrication, electrocatalytic performance, durability, and measures for enhancing their efficiency. In addition, prospective ideas on metal-based WS electrocatalysts based on existing problems are presented. It is anticipated that this review will offer a straight direction toward the engineering and construction of novel polyfunctional electrocatalysts encompassing superior efficiency in a suitable WS technique.

Electronic modulation of Co2P nanoneedle arrays by the doping of transition metal Cr atoms for a urea oxidation reaction

Urea electrolysis is of great interest for energy-related applications, but it is limited by a complex six-electron transfer process with slow kinetics. Herein, the in situ growth of Cr-doped Co₂P homogeneous nanoneedle arrays on nickel foam substrates (Cr-Co₂P/NF) was reported for the first time by a typical hydrothermal and low-temperature phosphorization process. The appropriate amount of Cr doping was found to promote the electronic modulation of active centers and the expansion of the specific active surface area, resulting in the superior performance of the urea oxidation reaction (UOR). It is noteworthy that Cr_0.4-Co₂P/NF exhibited a superior performance of the UOR at an onset potential of 1.290 V and a cell voltage of 1.333 V at 50 mA cm^-2 in 1 M KOH containing 0.5 M urea, which is one of the best catalytic activities reported so far. The experimental results demonstrate that the enhanced catalytic activity can be attributed to favorable electronic regulation, an improved charge transfer rate and increased exposure to active sites. Density functional theory (DFT) calculation indicates that the appropriate doping of Cr effectively regulates and controls the adsorption energy of urea and the conductivity of the Co₂P material itself. This work provides new ideas for the development of robust catalysts for the electrolysis of urea through doping strategies.

Co3O4@NiMoO4 composite electrode materials for flexible hybrid capacitors

Co₃O₄ nanomaterials as electrodes have been studied widely in the past decade due to their unique structural characteristics. However, their performance does not yet reach the level required for practical applications. It is, nevertheless, an effective strategy to synthesize hybrid electrode materials with high energy density. Herein we prepare Co₃O₄@NiMoO₄ nanowires by a two-step hydrothermal method. The as-obtained sample can be directly used as cathode material of supercapacitors; with specific capacitance of 600 C/g at 1 A/g. An assembled capacitor delivers an energy density of 36.1 Wh/kg at 2700 W/kg, and retains 98.2% of the initial capacity after 8000 cycles.

Co doped MoS2 nanosheet: a stable and pH-universal electrocatalyst for efficient hydrogen evolution reaction

Generally, the hydrogen generation of non-noble metal based electrocatalysts is limited by the high overpotential and acid-base environment of electrolyte. Therefore, it is essential to develop hydrogen evolution reaction (HER)...

Photocatalytic Hydrogen Evolution Based on Cobalt-Organic Framework with High Water Vapor Adsorption

Photocatalytic hydrogen evolution is desired to effectively alleviate the serious crisis of energy and the environment, and the utilization of low-cost photocatalysts, especially cobalt-based MOF catalysts, is meaningful, but rarely investigated. Herein, through a self-assembly strategy, we synthesized a Co clusters-based MOF (Co₃-XL) by the ligand N,N'-bicyclo[2.2.2]oct-7-ene-2,3,5,6-tetracarboxdiimide bi(1,2,4-triazole), containing abundant carbonyl O atoms in the channels of the 3D skeleton, and a large porosity of 50.7%. The as-synthesized MOF can be stable in the pH range of 3-10 and shows a narrow band gap of 1.82 eV. Furthermore, its maximum amount of water absorption can reach 192 cm³/g. Under irradiation of simulated solar light, the rate of hydrogen evolution is 23.05 μmol·h^-1·g^-1 among 12 h with the presence of co-catalyst Pt and photosensitizer RhB. The reaction mechanism has been probed by the transient photocurrent response and steady-state photoluminescence spectra. Therefore, as a narrow band gap photocatalyst, the cobalt clusters-based MOF (Co₃-XL) has potential applications for hydrogen evolution from water.

Rational construction of free-standing P-doped Fe2O3 nanowire arrays as highly effective electrocatalyst for overall water splitting

Designing electrode structures with high activity is very significant for energy conversion systems. However, single electrode materials often exhibit poor electronic transportation. To address this issue, we prepared P-Fe2O3 nanowire arrays through a convenient hydrothermal and phosphation method. The as-obtained electrode materials exhibited excellent electrocatalytic performance, which could be attributed to the P element decoration improving the reaction active sites. The as-obtained P-Fe2O3-0.45 nanowire arrays exhibited excellent OER activity with a low overpotential of 270 mV at 10 mA cm-2 (72.1 mV dec-1), excellent HER performance with a low overpotential of 126.4 mV at -10 mA cm-2, a small Tafel slope of 72.5 mV dec-1 and long durability. At the same time, the P-Fe2O3-0.45 nanowire arrays possessed a low cell voltage of 1.56 V at 10 mA cm-2.

Polypyrrole Hollow Microspheres with Boosted Hydrophilic Properties for Enhanced Hydrogen Evolution Water Dissociation Kinetics

The water dissociation step (H₂O + M + e^- → M - H_ads + OH^-) is a crucial one toward achieving high-performance hydrogen evolution reaction (HER). The application of electronic conducting polymers (ECPs), such as polypyrrole (PPy), as the electrocatalyst for HER is rarely reported because of their poor adsorption energy per water molecule, which hinders the Volmer step. Herein, we strongly enrich PPy hollow microspheres (PPy-HMS) with attractive HER activity by enhancing their hydrophilic properties through hybridization with good water affinity SiO₂. The as-prepared PPy-coated SiO₂ (PPy@SiO₂-HMS) achieves a current density of 10 mA cm^-2 at -123 mV, which is lower than that of pristine PPy-HMS (-192 mV). Raman and X-ray photospectroscopy analyses reveal that the enhanced HER catalytic capability can be attributed to the strong electronic couplings between PPy and SiO₂, and this improves the adsorption energy per water molecule and in turn accelerates the water dissociation kinetics on PPy. This work highlights the potential application of low-cost ECPs as promising electrocatalysts for water electrolysis.