Applications of metal–organic framework composites in CO2 capture and conversion

Dihydroxyl modified UiO-66 as dispersive solid-phase extraction sorbent coupled with ultra-high performance liquid chromatography tandem mass spectrometry for detection of neonicotinoid insecticides

The extensive usage of neonicotinoid insecticides (NIs) has raised many concerns about their potential harm to environment and human health. Thus, it is of great importance to develop an efficient and reliable method to determine NIs in food samples. In this work, three Zr4+-based metal-organic frameworks functionalized with various numbers of hydroxyl groups were fabricated with a facile one-pot solvothermal method. Among them, dihydroxy modified UiO-66 (UiO-66-(OH)2) exhibited best adsorption performance towards five target NIs. Then, a sensitive and efficient method for detection of NIs from vegetable and fruit samples was established based on dispersive solid phase extraction (dSPE) with UiO-66-(OH)2 as adsorbent coupled with ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS). Key parameters affecting the dSPE procedure including amounts of adsorbent, adsorption time, eluent solvents and desorption time were investigated. Under the optimal conditions, rapid adsorption of NIs within five minutes was achieved due to the high affinity of UiO-66-(OH)2 towards NIs. The developed method exhibited high sensitivity with limits of detection (LODs) varied from 0.003 to 0.03 ng/mL and wide linearity range over 3-4 orders of magnitude from 0.01 to 500 ng/mL. Furthermore, the established method was applied for determining trace NIs from complex matrices with recoveries ranging from 74.6 to 99.6 % and 77.0-106.8 % for pear and tomato samples, respectively. The results indicate the potential of UiO-66-(OH)2 for efficient enrichment of trace NIs from complex matrices.

Amino-functionalized nanocellulose aerogels for the superior adsorption of CO2 and separation of CO2/CH4 mixture gas

Nanocellulose-based aerogels have been considered as one of the ideal candidates for CO2 capture in practical applications owing to their lightweight and porous properties. Additionally, various adsorbents with amine groups have been widely used as effective CO2 capture and storage strategies. Herein, amino-functionalized aerogels were prepared by sol-gel and freeze-drying methods using two typical nanocelluloses (cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs)) as substrates. In addition, the reaction parameters for grafting and amino functionalization were optimized. The CNC and CNF aerogels could be easily modified by the hydrothermal growth of the amino group, and they exhibited attractive properties in terms of CO2 adsorption, recyclability, thermal stability, hydrophobicity, and CO2/CH4 mixture separation. The amino-functionalized CNF aerogel exhibited superior performance to the CNC aerogel, which was attributed to the increased cross-linking binding sites for hydrogen bonding in the CNF aerogel. The results of this study indicated that amino-functionalized nanocellulose aerogels can be considered a promising biodegradable, sustainable, and environmentally friendly material for CO2 capture and removal of CO2 from CH4.

Two-Dimensional Porphyrinic Metal-Organic Framework Composites as a Photocatalytic Platform for Chemoselective Hydrogenation

Chemoselective hydrogenation with high efficiency under ambient conditions remains a great challenge. Herein, an efficient photocatalyst, the 2D porphyrin metal-organic framework composite AmPy/Pd-PPF-1(Cu), featuring AmPy (1-aminopyrene) sitting axially on a paddle-wheel unit, has been rationally fabricated. The 2D AmPy/Pd-PPF-1(Cu) composite acts as a photocatalytic platform, promoting the selective hydrogenation of quinolines to tetrahydroquinolines with a yield up to 99%, in which ammonia borane serves as the hydrogen donor. The AmPy molecules coordinated on a 2D MOF not only enhance the light absorption capacity but also adjust the layer spacing without affecting the network structure of 2D Pd-PPF-1(Cu) nanosheets. Through deuterium-labeling experiments, in situ X-ray photoelectron spectroscopy, electron paramagnetic resonance studies, and density functional theory calculations, it is disclosed that Cu paddle-wheel units in 2D AmPy/Pd-PPF-1(Cu) nanosheets behave as the active site for transfer hydrogenation, and metalloporphyrin ligand and axial aminopyrene molecules can enhance the light absorption capacity and excite photogenerated electrons to Cu paddle-wheel units, assisting in photocatalysis.

Thiazolo[5,4-d]thiazole-Based Metal-Organic Framework for Catalytic CO2 Cycloaddition and Photocatalytic Benzylamine Coupling Reactions

Metal-organic frameworks (MOFs) with permanent porosity and multifunctional catalytic sites constructed by two or more organic ligands are regarded as effective heterogeneous catalysts to improve certain organic catalytic reactions. In this work, a pillared-layer Zn-MOF (MOF-LS10) was constructed by 2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine (H4TCPP) and 2,5-di(pyridin-4-yl)thiazolo[5,4-d]thiazole (DPTZTZ). After activation, MOF-LS10 has a permanent porosity and moderate CO2 adsorption capacity. The introduction of thiazolo[5,4-d]thiazole (TZTZ), a photoactive unit, into the framework endows MOF-LS10 with excellent photocatalytic performance. MOF-LS10 can not only efficiently catalyze the formation of cyclic carbonates from CO2 and epoxide substrates under mild conditions but also can photocatalyze benzylamine coupling at room temperature. In addition, we used another two ligands 1,2,4,5-tetrakis(4-carboxyphenyl)benzene (H4BTEB) and 1,4-di(pyridin-4-yl)benzene (DPB) to synthesize MOF-LS11 (constructed by BTEB4- and DPTZTZ) and MOF-LS12 (constructed by TCPP4- and DPB) in order to explore whether the pyrazine structural unit and the TZTZ structural unit synergistically catalyze the reaction. The electron paramagnetic resonance spectrum demonstrates that the superoxide radical (·O2-), generated by electron transfer from the MOF excited by light to the oxidant, is the main active substance of oxidation. The design and synthesis of MOF-LS10 provide an effective synthetic strategy for the development of versatile heterogeneous catalysts for various organic reactions and a wide range of substrates.

Improved structure of Zr-BTC metal organic framework using NH2 to enhance CO2 adsorption performance

Modified mesoporous NH2-Zr-BTC mixed ligand MOF nanocomposites were synthesized via the hydrothermal method as a novel adsorbent for CO2 capture. The newly modified MOF-808 with NH2 demonstrated a similar mesoporous morphology as MOF-808, whereas the specific surface area, pore volume, and average particle size, respectively, increased by 15%, 6%, and 46% compared to those of MOF-808. The characterization analyses exhibited the formation of more active groups on the adsorbent surface after modification. In addition, a laboratory adsorption setup was used to evaluate the effect of temperature, pressure, and NH2 content on the CO2 adsorption capacity in the range of 25-65 °C, 1-9 bar, and 0-20 wt%, respectively. An increase in pressure and a decrease in temperature enhanced the adsorption capacity. The highest equilibrium adsorption capacity of 369.11 mg/g was achieved at 25 °C, 9 bar, and 20 wt% NH2. By adding 20 wt% NH2, the maximum adsorption capacity calculated by the Langmuir model increased by about 4% compared to that of pure MOF-808. Moreover, Ritchie second-order and Sips models were the best-fitted models to predict the kinetics and isotherm data of CO2 adsorption capacity with the high correlation coefficient (R2 > 0.99) and AARE% of less than 0.1. The ΔH°, ΔS°, and ΔG° values were - 17.360 kJ/mol, - 0.028 kJ/mol K, and - 8.975 kJ/mol, respectively, demonstrating a spontaneous, exothermic, and physical adsorption process. Furthermore, the capacity of MH-20% sample decreased from 279.05 to 257.56 mg/g after 15 cycles, verifying excellent stability of the prepared mix-ligand MOF sorbent.

Cooperative Catalytic Alkyne Hydrosilylation by a Porphyrinic Metal-Organic Framework Composite

Vinylsilanes are valuable building blocks and important structural units in organic chemistry. Herein, catalytic alkyne hydrosilylation was reported to be promoted by a porphyrin metal-organic framework with the incorporation of Pd nanoparticles (Pd@Ir-PCN-222). Catalytic results showed that Pd@Ir-PCN-222 displayed high catalytic efficiency, giving rise to the E isomer vinylsilane with an excellent turnover frequency (TOF) of 2564 h-1. The mechanism studies revealed that the enhancement of the catalytic activity originated from the cooperation between iridium porphyrin and the Pd nanoparticle in confined spaces. The iridium porphyrin was prone to absorb and condense the hydrosilane and alkyne in the inner cavities of Ir-PCN-222, not only accelerating the reaction but also promoting the Pd nanoparticle to activate the Si-H and C≡C bonds of hydrosilane and alkyne, respectively.

Boron-Assisted Cobalt-Catalyzed C-H Methylation Using CO2 and H2

C-H methylation of heteroarenes (e.g., indoles, pyrroles, etc.) is frequently applied in the synthesis of drug/biorelated compounds. We herein report the use of CO2/H2 as a methylation reagent for selective C-H methylation of indoles and pyrroles in the presence of cobalt/B(C6F5)3 cocatalysts. The Lewis acidic additive B(C6F5)3 is essential to achieving good reactivity for a broad scope of substituted indoles and pyrroles (20 examples, up to 92% yields). The C-H methylation is accomplished via the CO2 reduction/C-C bond formation/reduction sequence. Water is the only byproduct. This system based on the use of non-noble metal catalysts features an environmentally benign alternative for C-H methylation.

A Hydrophilic Mixed Lanthanide Metal-Organic Framework Monitoring H2O in D2O

Lanthanide metal-organic framework (Ln-MOF) luminescent sensors monitoring the H₂O content in D₂O are still rare. We designed and built a hydrophilic mixed Ln-MOF (Eu_0.4Tb_0.6-MOF) monitoring the H₂O content in D₂O. By designing a ligand and controlling the synthesis method, we achieved a balance between the structural stability and sensing capacity. When the H₂O content ranges from 0 to 100%, the photoluminescence color of Eu_0.4Tb_0.6-MOF can change from yellow to green, which can be observed by the naked eye. The mechanism is that the photoluminescence intensity of Eu³⁺ decreases faster than that of Tb³⁺ when the H₂O content increases. The sensing mechanism was studied further by transient fluorescence spectrometry.

Turning C1-gases to isobutanol towards great environmental and economic sustainability via innovative biological routes: two birds with one stone

BACKGROUND

The dramatic increase in greenhouse gas (GHG) emissions, which causes serious global environmental issues and severe climate changes, has become a global problem of concern in recent decades. Currently, native and/or non-native C1-utilizing microbes have been modified to be able to effectively convert C1-gases (biogas, natural gas, and CO₂) into isobutanol via biological routes. Even though the current experimental results are satisfactory in lab-scale research, the techno-economic feasibility of C1 gas-derived isobutanol production at the industrial scale still needs to be analyzed and evaluated, which will be essential for the future industrialization of C1-gas bioconversion. Therefore, techno-economic analyses were conducted in this study with comparisons of capital cost (CAPEX), operating cost (OPEX), and minimum isobutanol selling price (MISP) derived from biogas (scenario #1), natural gas (scenario #2), and CO₂ (scenario #3) with systematic economic assessment.

RESULTS

By calculating capital investments and necessary expenses, the highest CAPEX ($317 MM) and OPEX ($67 MM) were projected in scenario #1 and scenario #2, respectively. Because of the lower CAPEX and OPEX from scenario #3, the results revealed that bioconversion of CO₂ into isobutanol temporally exhibited the best economic performance with an MISP of $1.38/kg isobutanol. Furthermore, a single sensitivity analysis with nine different parameters was carried out for the production of CO₂-derived isobutanol. The annual plant capacity, gas utilization rate, and substrate cost are the three most important economic-driving forces on the MISP of CO₂-derived isobutanol. Finally, a multiple-point sensitivity analysis considering all five parameters simultaneously was performed using ideal targets, which presented the lowest MISP of $0.99/kg in a long-term case study.

CONCLUSIONS

This study provides a comprehensive assessment of the bioconversion of C1-gases into isobutanol in terms of the bioprocess design, mass/energy calculation, capital investment, operating expense, sensitivity analysis, and minimum selling price. Compared with isobutanol derived from biogas and natural gas, the CO₂-based isobutanol showed better economic feasibility. A market competitive isobutanol derived from CO₂ is predicable with lower CO₂ cost, better isobutanol titer, and higher annual capacity. This study will help researchers and decision-makers explore innovative and effective approaches to neutralizing GHGs and focus on key economic-driving forces to improve techno-economic performance.

Construction of Bimetallic Metal-Organic Frameworks with the Nanosheet-Assembled Hierarchical Hollow Structure for CO2 Fixation

Incorporating secondary metal nodes with functionality into organic ligand nodes to form a bimetallic metal-organic frameworks (MOFs) would facilitate an enhancement in properties and broaden applied areas of MOFs. Hierarchical tubular Cu/Zn-MOF-74 assembled by nanosheet arrays is synthesized at ambient temperature and pressure by phase transformation of Cu-based precursor MOF in immersion solution with Zn²⁺. The content of Zn in Cu/Zn-MOF-74 can be controlled by adjusting the concentration of Zn²⁺ in immersion solution, and it can reach a maximum of 36.4%. Moreover, the catalytic activity toward cycloaddition of CO₂ with styrene oxide of Cu/Zn-MOF-74 is improved significantly compared with that of monometallic Cu-MOF-74. Meanwhile, the advanced hierarchical tubular structure contributing to enhancement in catalytic activity enables Cu/Zn-MOF-74 to present higher conversion toward this cycloaddition of CO₂ than traditional rod-like Cu/Zn-MOF-74. This templated synthesis would provide an opportunity for designing various bimetallic MOFs or MOF-based compounds with improved performances in multiple applications.

Supported Bimetallic Trimers Fe2M@NG: Triple-Atom Catalysts for CO2 Electroreduction

Excessive accumulation of carbon dioxide in the atmosphere has become a serious environmental problem due to the increasing consumption of fossil fuels in modern society. Reasonably reducing CO₂ in the atmosphere has become a new research hotspot. Electrocatalytic CO₂ reduction reaction (CO₂RR) offers an appealing strategy to reduce the atmospheric CO₂ concentration and to produce value-added chemicals simultaneously. In this paper, two-dimensional (2D) N-decorated graphene (NG)-supported bimetallic trimers (Fe₂M@NG) were designed as triple-atom catalysts (TACs). Theoretical calculations showed that Fe₂M@NG can effectively activate CO₂, and among the 23 TACs examined, Fe₂Ir@NG not only has a good catalytic activity for CO₂RR (limiting potential is 0.49 V for CH₄ formation) but also limits the competing side reaction of the hydrogen evolution reaction (HER). Our theoretical study not only further extends the triple-atom catalysts, but also opens a new door to boost the sustainable CO₂ conversion.

Metal-organic frameworks and their composites for fuel and chemical production via CO2 conversion and water splitting

Increase in the global energy demand has been leading to major energy crises in recent years. The use of excess fossil fuels for energy production is causing severe global warming, as well as energy shortage. To overcome the global energy crisis, the design of various chemical structures as efficient models for the generation of renewable energy fuels is very much crucial, and will limit the use of fossil fuels. Current challenges involve the design of Metal-Organic Framework (MOF) materials for this purpose to diminish the energy shortage. The large surface area, tunable pore environment, unique structural property and semiconducting nature of the highly porous MOF materials enhance their potential applications towards the production of enhanced energy fuels. This review is focused on the architecture of MOFs and their composites for fuels and essential chemicals production like hydrogen, methane, ethanol, methanol, acetic acid, and carbon monoxide, which can be used as renewable fuel energy sources to limit the use of fossil fuels, thereby reducing global warming.

Multi-functional metal-organic frameworks for detection and removal of water pollutions

Water pollutions have caused serious threats to the aquatic environment and human health, it is of great significance to monitor and control their contents in water. Compared with the traditional...

Highly connected framework materials from flexible tetra-isophthalate ligands

High connectivity octacarboxylate ligands containing non-coordinating diamine cores lead to a wide variety of new MOFs, many containing cage-like pores.