Potential active sites of Mo single atoms for electrocatalytic reduction of N2

Crystal-Phase and Surface-Structure Engineering of Bi2O3 for Enhanced Electrochemical N2 Fixation to NH3

The nitrogen reduction reaction (NRR) for ammonia synthesis is hindered by weak N2 adsorption/activation abilities and the hydrogen evolution reaction (HER). In this study, αBi2O3 (monoclinic) and βBi2O3 (tetragonal) were first synthesized by calcination at different temperatures. Experiments and calculations revealed the effects of Bi2O3 with different crystal phases on N2 adsorption/activation abilities and HER. Then, αBi2O3-x and βBi2O3-x series catalysts with surface oxygen vacancies (OVs) and Bi0 active sites were synthesized through the partial in situ reduction method. The results demonstrate the following: (I) Tetragonal βBi2O3 can better adsorb N2 and cleave the N≡N bond, thereby obtaining a lower NRR rate-limiting energy barrier (*N≡N → *N≡N-H, 0.51 eV). Meanwhile, βBi2O3 can effectively suppress HER by limiting proton adsorption (H+ + e- → *H, 0.54 eV). Therefore, βBi2O3-x series catalysts exhibit higher NH3 yield and FE than αBi2O3-x. Meanwhile, in situ FTIR further confirms that βBi2O3 could better adsorb/activate N2, and the NRR distal mechanism occurs on the Bi2O3 surface. (II) The introduction of NaBH4 promotes the conversion of part of Bi3+ on the Bi2O3 surface into Bi0 and releases OVs. The additional active sites (OVs and Bi0) enhance the overall catalyst's adsorption/activation capacity for N2, further increasing the NH3 yield and FE. Meanwhile, semimetal Bi0 can effectively limit electron accessibility, thereby inhibiting the combination of charges and adsorbed protons, reducing the HER reaction and improving the FE of NRR. Therefore, the introduction of NaBH4 effectively improved the NH3 yield and FE of the αBi2O3-x and βBi2O3-x series catalysts. After optimization, the βBi2O3-0.6 catalyst has the best NRR performance (NH3 yield: 51.36 μg h-1 mg-1cat.; FE: 38.67%), which is superior to the majority of bismuth-based NRR catalysts. This work not only studies the effects of Bi2O3 with different crystal phases on N2 and HER reaction but also effectively regulates the active components of Bi2O3 surface, thereby realizing efficient NRR to NH3 reaction, which provide valuable insights for the rational design of Bi-based NRR electrocatalysts.

Advancements in Electrocatalytic Nitrogen Reduction: A Comprehensive Review of Single-Atom Catalysts for Sustainable Ammonia Synthesis

Electrocatalytic nitrogen reduction technology seamlessly aligns with the principles of environmentally friendly chemical production. In this paper, a comprehensive review of recent advancements in electrocatalytic NH3 synthesis utilizing single-atom catalysts (SACs) is offered. Into the research and applications of three categories of SACs: noble metals (Ru, Au, Rh, Ag), transition metals (Fe, Mo, Cr, Co, Sn, Y, Nb), and nonmetallic catalysts (B) in the context of electrocatalytic ammonia synthesis is delved. In-depth insights into the material preparation methods, single-atom coordination patterns, and the characteristics of the nitrogen reduction reaction (NRR) are provided. The systematic comparison of the nitrogen reduction capabilities of various SAC types offers a comprehensive research framework for their integration into electrocatalytic NRR. Additionally, the challenges, potential solutions, and future prospects of incorporating SACs into electrocatalytic nitrogen reduction endeavors are discussed.

Nitrogen-vacancy-modulated efficient ammonia desorption over 3d TM-anchored BC3N2 monolayer

Nitrogen fixation using electrochemical methods on the surface of single-atom catalysts (SACs) provides a highly feasible strategy for green and low-energy-consumption ammonia (NH3) production. Herein, using density functional theory (DFT) calculations, we explored in detail the potential of monolayer BC3N2 SACs supported with 3d transition metal (TM) atoms (TM@BC3N2) to facilitate nitrogen reduction. The results revealed that the TM@BC3N2 systems exhibited remarkable catalytic activity in the nitrogen-reduction reaction (NRR). The fine NRR activity was related to the just-right bonding/antibonding orbital interactions between the 2π* of N2 and the d orbitals of the TM ions. The nitrogen-adsorption configurations were found to have different activation mechanisms. In addition, the effects of convectively formed convex nitrogen defects (VN) on the interaction between N2 and VN-TM@BC3N2 and the NRR process of VN-TM@BC3N2 were studied, and it was found that VN could fine-tune the reaction efficiency of the eNRR because after N atom dissociation to form VN, the interaction of TM-C3 was enhanced, and the activation of nitrogen and adsorption of NH3 by the TM-active centers were weakened. The present study can be used as a motivation for further experimental and theoretical research of 2D monolayers as NRR electrocatalysts.

A DFT Investigation of B-Doped C3 N as Single Atom Electrocatalysts for N2 -to-NH3 Conversion

The NH3 synthesis from N2 plays an important role in the ecological cycle and industrial production. Different from industrial NH3 synthesis with high pollution and energy consumption, electrocatalytic NH3 synthesis is favored because of its environmental protection, energy saving, ambient reaction conditions and other characteristics. However, due to the low efficiency and poor reaction selectivity of the existing electrocatalysts, which can not be used actually, the development of new electrocatalysts for nitrogen reduction reaction (NRR) is particularly urgent. Herein, we designed a series of transition metal atoms anchored B-doped defective C3 N surface (TM@B2 C3 N) as single-atom catalysts. Through the screening process of N2 adsorption activation, N2 H formation and NH3 desorption, finally the excellent electrocatalysts with strong stability and high activity (Cr@B2 C3 N and Mn@B2 C3 N) were obtained. After simulating the entire pathway, it was found that the NRR process on Cr@B2 C3 N and Mn@B2 C3 N via consecutive and distal pathways with the lowest limiting potential of -0.42 and -0.52 V, which have the good ability to inhibit hydrogen evolution reaction. Finally, the electronic properties were analyzed, and the reason for their high catalytic activity was summarized. This work provides a new idea for the rational design of NRR electrocatalysts and promotes the practical application of electrocatalysts.

Yttrium-modified drinking water treatment residue for efficient phosphorus removal: efficacy, mechanism, and reproducibility

The excessive presence of phosphate can cause eutrophication in water bodies. Yttrium has an extremely high affinity for phosphorus and is capable of forming stable complexes at low concentrations. Moreover, limitations in the resourcefulness of drinking water treatment residues were observed. In this study, a highly efficient phosphorus removal adsorbent (RJDWTR@Y) was prepared by calcination-alkali leaching-yttrium-loaded composite modification employing domestic drinking water treatment residue as raw material. And the effects of multiple factors on phosphate adsorption by RJDWTR@Y were examined. The results illustrated that the maximum adsorption capacity of the RJDWTR@Y for phosphate was 319.76 mg/g, with the chemical reaction of the multilayer as the predominant adsorption process. The adsorption mechanism is electrostatic gravitational force and the inner sphere complexation effect. RJDWTR@Y was effective against interference even at high concentrations of the coexisting anion. After five cycles, the desorption efficiency of phosphate was 75.11%. Filling the fixed bed with the material can efficiently remove phosphorus from the flowing liquid. The synthesis of RJDWTR@Y and the results of the study indicated that it has good application prospects. In addition to efficiently removing phosphorus, it can also recycle waste and achieve sustainability.

Designing a Built-In Electric Field for Efficient Energy Electrocatalysis

To utilize intermittent renewable energy as well as achieve the goals of peak carbon dioxide emissions and carbon neutrality, various electrocatalytic devices have been developed. However, the electrocatalytic reactions, e.g., hydrogen evolution reaction/oxygen evolution reaction in overall water splitting, polysulfide conversion in lithium-sulfur batteries, formation/decomposition of lithium peroxide in lithium-oxygen batteries, and nitrate reduction reaction to degrade sewage, suffer from sluggish kinetics caused by multielectron transfer processes. Owing to the merits of accelerated charge transport, optimized adsorption/desorption of intermediates, raised conductivity, regulation of the reaction microenvironment, as well as ease to combine with geometric characteristics, the built-in electric field (BIEF) is expected to overcome the above problems. Here, we give a Review about the very recent progress of BIEF for efficient energy electrocatalysis. First, the construction strategies and the characterization methods (qualitative and quantitative analysis) of BIEF are summarized. Then, the up-to-date overviews of BIEF engineering in electrocatalysis, with attention on the electron structure optimization and reaction microenvironment modulation, are analyzed and discussed in detail. In the end, the challenges and perspectives of BIEF engineering are proposed. This Review gives a deep understanding on the design of electrocatalysts with BIEF for next-generation energy storage and electrocatalytic devices.

Progress in Mo/W-based electrocatalysts for nitrogen reduction to ammonia under ambient conditions

Ammonia (NH₃), possessing high hydrogen content and energy density, has been widely employed for fertilizers and value-added chemicals in green energy carriers and fuels. However, the current NH₃ synthesis largely depends on the traditional Haber-Bosch process, which needs tremendous energy consumption and generates greenhouse gas, resulting in severe energy and environmental issues. The electrochemical strategy of converting N₂ to NH₃ under mild conditions is a potentially promising route to realize an environmentally friendly concept. Among various catalysts, molybdenum/tungsten-based electrocatalysts have been widely used in electrochemical catalytic and energy conversion. This review describes the latest progress of molybdenum/tungsten-based electrocatalysts for the electrochemical nitrogen reduction reaction. The fundamental roles of morphology, doping, defects, heterojunction, and coupling regulation in improving electrocatalytic performance are mainly discussed. Besides, some tailoring strategies for enhancing the conversion efficiency of N₂ to NH₃ over Mo/W-based electrocatalysts are also summarized. Finally, the existing challenges and limitations of N₂ fixation are proposed, as well as possible future perspectives, which will provide a platform for further development of advanced Mo/W-based N₂ reduction systems.

Design strategies of two-dimensional metal-organic frameworks toward efficient electrocatalysts for N2 reduction: cooperativity of transition metals and organic linkers

Two-dimensional (2D) metal-organic frameworks (MOFs) serve as emerging electrocatalysts due to their high conductivity, chemical tunability, and accessibility of active sites. We herein proposed a series of 2D MOFs with different metal atoms and organic linkers with the formula M₃C₁₂X₁₂ (M = Cr, Mo, and W; X = NH, O, S, and Se) to design efficient nitrogen reduction reaction (NRR) electrocatalysts. Our theoretical calculations showed that metal atoms in M₃C₁₂X₁₂ can efficiently capture and activate N₂ molecules. Among these candidates, W₃C₁₂X₁₂ (X = O, S, and Se) show the best NRR performance due to their high activity and selectivity as well as low limiting potential (-0.59 V, -0.14 V, and -0.01 V, respectively). Moreover, we proposed a d-band center descriptor strategy to screen out the high activity and selectivity of M₃C₁₂X₁₂ for the NRR. Therefore, our work not only demonstrates a class of promising electrocatalysts for the NRR but also provides a strategy for further predicting the catalytic activity of 2D MOFs.

Single Atom Catalysts for Fuel Cells and Rechargeable Batteries: Principles, Advances, and Opportunities

Owing to the energy crisis and environmental pollution, developing efficient and robust electrochemical energy storage (or conversion) systems is urgently needed but still very challenging. Next-generation electrochemical energy storage and conversion devices, mainly including fuel cells, metal-air batteries, metal-sulfur batteries, and metal-ion batteries, have been viewed as promising candidates for future large-scale energy applications. All these systems are operated through one type of chemical conversion mechanism, which is currently limited by poor reaction kinetics. Single atom catalysts (SACs) perform maximum atom efficiency and well-defined active sites. They have been employed as electrode components to enhance the redox kinetics and adjust the interactions at the reaction interface, boosting device performance. In this Review, we briefly summarize the related background knowledge, motivation and working principle toward next-generation electrochemical energy storage (or conversion) devices, including fuel cells, Zn-air batteries, Al-air batteries, Li-air batteries, Li-CO₂ batteries, Li-S batteries, and Na-S batteries. While pointing out the remaining challenges in each system, we clarify the importance of SACs to solve these development bottlenecks. Then, we further explore the working principle and current progress of SACs in various device systems. Finally, future opportunities and perspectives of SACs in next-generation electrochemical energy storage and conversion devices are discussed.

Design of Binary Cu-Fe Sites Coordinated with Nitrogen Dispersed in the Porous Carbon for Synergistic CO2 Electroreduction

To relieve the green gas emission and involve the carbon neutral cycle, electrochemical reduction of CO₂ attracts more and more attention. Herein, a biatomic site catalyst of Cu-Fe coordinated with the nitrogen, which is doped in the carbon matrix (denoted as Cu-Fe-N₆ -C), is designed. The as-obtained Cu-Fe-N₆ -C exhibits higher performance than that of Cu-N-C and Fe-N-C, owing to bimetallic sites, proving synergistic functions based on different molecules and their interfaces. Cu-Fe-N₆ -C shows high selectivity toward CO, with high Faradaic efficiency (98% at -0.7 V), and maintaining 98% of its initial selectivity after 10 h electrolysis. The experimental results and theoretical calculations reveal that the synergistic catalysis of different metallic sites enlarges the adsorption enthalpy of CO₂ , reducing the activation energy result in generating high selectivity, activity, stability, and low impedance.

Catalytic separators with Co–N–C nanoreactors for high-performance lithium–sulfur batteries

An atomically dispersed supported metal catalyst with a Co–N₄ structure on active carbon (Co–N–C/AC) is prepared and introduced to modify the separators of Li–S batteries.