Advances in engineering RuO2 electrocatalysts towards oxygen evolution reaction

Template-Assisted in situ synthesis of superaerophobic bimetallic MOF composites with tunable morphology for boosted oxygen evolution reaction

CoFe bimetallic organic frameworks (CoFe-MOFs) with tunable morphology and electronic structure are synthesized in situ utilizing cobalt hydroxide (Co(OH)2) as a semi-sacrificial template and different anionic iron salts as modifying factors in a non-calcined synthesis method. This work defines the impact of three different anionic metallic iron salts (FeCl3, Fe(NO3)3, and Fe2(SO4)3) on the morphology of MOF materials and their resulting oxygen evolution reaction (OER) catalytic activity. Employing ferric chloride (FeCl3) as the metallic iron source, heterostructured electrocatalysts (BN-CoFe-MOF) with nanoparticles decorated nanoneedle tips are obtained, exhibiting a low overpotential (230 mV at 10 mA cm-2) and a Tafel slope of 105.6 mV dec-1 in 1.0 M KOH. It also demonstrates long time stability for at least 50 h at a current density of 10 mA cm-2. The investigation uncovers that the splendid OER activity and stability of the BN-CoFe-MOF heterojunction can be attributed to its large specific surface area, desirable mesoporous structure, superaerophobic characteristic, and high exposure of active centers. This work not only provides an efficient and cost-effective MOF based OER electrocatalyst but also serves as a valuable reference for future research on morphology control and strategies to enhance the OER activity of MOF catalysts.

Oxyanion Engineering on RuO2 for Efficient Proton Exchange Membrane Water Electrolysis

In acidic proton exchange membrane water electrolysis (PEMWE), the anode oxygen evolution reaction (OER) catalysts rely heavily on the expensive and scarce iridium-based materials. Ruthenium dioxide (RuO2) with lower price and higher OER activity, has been explored for the similar task, but has been restricted by the poor stability. Herein, we developed an anion modification strategy to improve the OER performance of RuO2 in acidic media. The designed multicomponent catalyst based on sulfate anchored on RuO2/MoO3 displays a low overpotential of 190 mV at 10 mA cm-2 and stably operates for 500 hours with a very low degradation rate of 20 μV h-1 in acidic electrolyte. When assembled in a PEMWE cell, this catalyst as an anode shows an excellent stability at 500 mA cm-2 for 150 h. Experimental and theoretical results revealed that MoO3 could stabilize sulfate anion on RuO2 surface to suppress its leaching during OER. Such MoO3-anchored sulfate not only reduces the formation energy of *OOH intermediate on RuO2, but also impedes both the surface Ru and lattice oxygen loss, thereby achieving the high OER activity and exceptional durability.

Theoretical insights into layered IrO2 for the oxygen evolution reaction

Here we present the density functional theory-based exploration of layered IrO2 polymorphs for the oxygen evolution reaction, as well as a data-driven geometric descriptor for catalytic activity. The layer edges are identified as promising active site motifs with not only low theoretical overpotential but also intriguing structural flexibility and to break the universal energetic scaling through torsional distortion.

Scale-Up, Continuous and Low-Temperature Production of Multimetal Based Electrocatalysts toward Water Electrolysis

Electrocatalytic water splitting is a crucial strategy for advancing hydrogen energy and addressing the global energy crisis. Despite its significance, the need for a straightforward and swift method to synthesize electrocatalysts with exceptional performance remains pressing. In this study, we demonstrate a novel approach for the preparation of multimetal-based electrocatalysts in a continuous flow reactor, enabling the quick synthesis of a large number of products through a streamlined process. The resultant NiFe-LDH comprises nanoflakes with a high specific surface area and requires only 255.4 mV overpotential to achieve a current density of 10 mA·cm-2 in 1 M KOH, surpassing samples fabricated by conventional hydrothermal methods. Our method can also be applied to craft a spectrum of other multimetal-based electrocatalysts, including CoFe-LDH, CoAl-LDH, NiMn-LDH, and NiCoFe-LDH. Additionally, the NiFe-LDH electrocatalyst is further applied to anodic methanol electrooxidation coupled with cathodic hydrogen evolution. Moreover, the simplicity and generality of our fabrication method render it applicable for the facile preparation of various multimetal-based electrocatalysts, offering a scalable solution to the quest for high-performance catalysts in advancing sustainable energy technologies.

Recent Advancements on Sustainable Electrochemical Water Splitting Hydrogen Energy Applications Based on Nanoscale Transition Metal Oxide (TMO) Substrates

The development of green hydrogen generation technologies is increasingly crucial to meeting the growing energy demand for sustainable and environmentally acceptable resources. Many obstacles in the advancement of electrodes prevented water electrolysis, long thought to be an eco-friendly method of producing hydrogen gas with no carbon emissions, from coming to fruition. Because of their great electrical conductivity, maximum supporting capacity, ease of modification in valence states, durability in hard environments, and high redox characteristics, transition metal oxides (TMOs) have recently captured a lot of interest as potential cathodes and anodes. Electrochemical water splitting is the subject of this investigation, namely the role of transition metal oxides as both active and supportive sites. It has suggested various approaches for the logical development of electrode materials based on TMOs. These include adjusting the electronic state, altering the surface structure to control its resistance to air and water, improving the flow of energy and matter, and ensuring the stability of the electrocatalyst in challenging conditions. In this comprehensive review, it has been covered the latest findings in electrocatalysis of the Oxygen Evolution Reaction (OER) and Hydrogen Evaluation Reaction (HER), as well as some of the specific difficulties, opportunities, and current research prospects in this field.

Bifunctional Amorphous Transition-Metal Phospho-Boride Electrocatalysts for Selective Alkaline Seawater Splitting at a Current Density of 2A cm-2

Hydrogen production by direct seawater electrolysis is an alternative technology to conventional freshwater electrolysis, mainly owing to the vast abundance of seawater reserves on earth. However, the lack of robust, active, and selective electrocatalysts that can withstand the harsh and corrosive saline conditions of seawater greatly hinders its industrial viability. Herein, a series of amorphous transition-metal phospho-borides, namely Co-P-B, Ni-P-B, and Fe-P-B are prepared by simple chemical reduction method and screened for overall alkaline seawater electrolysis. Co-P-B is found to be the best of the lot, requiring low overpotentials of ≈270 mV for hydrogen evolution reaction (HER), ≈410 mV for oxygen evolution reaction (OER), and an overall voltage of 2.50 V to reach a current density of 2 A cm-2 in highly alkaline natural seawater. Furthermore, the optimized electrocatalyst shows formidable stability after 10,000 cycles and 30 h of chronoamperometric measurements in alkaline natural seawater without any chlorine evolution, even at higher current densities. A detailed understanding of not only HER and OER but also chlorine evolution reaction (ClER) on the Co-P-B surface is obtained by computational analysis, which also sheds light on the selectivity and stability of the catalyst at high current densities.

Self-supported bimetallic array superstructures for high-performance coupling electrosynthesis of formate and adipate

The coupling electrosynthesis involving CO2 upgrade conversion is of great significance for the sustainable development of the environment and energy but is challenging. Herein, we exquisitely constructed the self-supported bimetallic array superstructures from the Cu(OH)2 array architecture precursor, which can enable high-performance coupling electrosynthesis of formate and adipate at the anode and the cathode, respectively. Concretely, the faradaic efficiencies (FEs) of CO2-to-formate and cyclohexanone-to-adipate conversion simultaneously exceed 90% at both electrodes with excellent stabilities. Such high-performance coupling electrosynthesis is highly correlated with the porous nanosheet array superstructure of CuBi alloy as the cathode and the nanosheet-on-nanowire array superstructure of CuNi hydroxide as the anode. Moreover, compared to the conventional electrolysis process, the cell voltage is substantially reduced while maintaining the electrocatalytic performance for coupling electrosynthesis in the two-electrode electrolyzer with the maximal FEformate and FEadipate up to 94.2% and 93.1%, respectively. The experimental results further demonstrate that the bimetal composition modulates the local electronic structures, promoting the reactions toward the target products. Prospectively, our work proposes an instructive strategy for constructing adaptive self-supported superstructures to achieve efficient coupling electrosynthesis.

Hollow Ru/RuO2 nanospheres with nanoparticulate shells for high performance electrocatalytic oxygen evolution reactions

This work shows that hollow Ru/RuO2 nanoparticles having nanoparticulate shells (HN-Ru/RuO2) can be prepared using hollow microporous organic polymers with Ru species (H-MOP-Ru) as precursors. Using silica spheres as templates, H-MOPs were prepared through the Sonogashira-Hagihara coupling of 1,3,5-triethynylbenzene with 2,3-ethoxymethylenedioxy-1,4-diiodobenzene. Acid hydrolysis of cyclic ethyl orthoformate protecting groups generated catechol moieties to form H-MOP-Cat. Then, H-MOP-Ru was obtained by incorporating Ru species into H-MOP-Cat. Heat-treatment of H-MOP-Ru under air induced the formation of HN-Ru/RuO2 with a diameter of 61 nm and shells consisting of 6-7 nm nanoparticles. Due to the hollow structure and nanoparticulate shells, HN-Ru/RuO2 showed a high surface area of 80 m2 g-1 and a pore volume of 0.18 cm3 g-1. The HN-Ru/RuO2 showed enhanced electrocatalytic performance for the oxygen evolution reaction (OER) with an overpotential of 295 mV @ 10 mA cm-2 and a Tafel slope of 46 mV dec-1 in alkaline electrolyte, compared with control RuO2 such as commercial Ru/RuO2 nanoparticles (A-Ru/RuO2) and home-made Ru/RuO2 nanoparticles (N-Ru/RuO2) prepared via the same synthetic procedure as HN-Ru/RuO2. While HN-Ru/RuO2 inevitably contained Pd originated from coupling catalysts, it showed superior performance to Ru/RuO2 nanoparticles with the same Pd content (N1-Ru/RuO2), indicating that the efficient electrocatalytic performance of HN-Ru/RuO2 is attributable to its hollow structure and nanoparticulate shells.

Non-noble metal single-atoms for oxygen electrocatalysis in rechargeable zinc-air batteries: recent developments and future perspectives

Ever-growing demands for zinc-air batteries (ZABs) call for the development of advanced electrocatalysts. Single-atom catalysts (SACs), particularly those for isolating non-noble metals (NBMs), are attracting great interest due to their merits of low cost, high atom utilization efficiency, structural tunability, and extraordinary activity. Rational design of advanced NBM SACs relies heavily on an in-depth understanding of reaction mechanisms. To gain a better understanding of the reaction mechanisms of oxygen electrocatalysis in ZABs and guide the design and optimization of more efficient NBM SACs, we herein organize a comprehensive review by summarizing the fundamental concepts in the field of ZABs and the recent advances in the reported NBM SACs. Moreover, the selection of NBM elements and supports of SACs and some effective strategies for enhancing the electrochemical performance of ZABs are illustrated in detail. Finally, the challenges and future direction in this field of ZABs are also discussed.

RuO2 Catalysts for Electrocatalytic Oxygen Evolution in Acidic Media: Mechanism, Activity Promotion Strategy and Research Progress

Proton Exchange Membrane Water Electrolysis (PEMWE) under acidic conditions outperforms alkaline water electrolysis in terms of less resistance loss, higher current density, and higher produced hydrogen purity, which make it more economical in long-term applications. However, the efficiency of PEMWE is severely limited by the slow kinetics of anodic oxygen evolution reaction (OER), poor catalyst stability, and high cost. Therefore, researchers in the past decade have made great efforts to explore cheap, efficient, and stable electrode materials. Among them, the RuO2 electrocatalyst has been proved to be a major promising alternative to Ir-based catalysts and the most promising OER catalyst owing to its excellent electrocatalytic activity and high pH adaptability. In this review, we elaborate two reaction mechanisms of OER (lattice oxygen mechanism and adsorbate evolution mechanism), comprehensively summarize and discuss the recently reported RuO2-based OER electrocatalysts under acidic conditions, and propose many advanced modification strategies to further improve the activity and stability of RuO2-based electrocatalytic OER. Finally, we provide suggestions for overcoming the challenges faced by RuO2 electrocatalysts in practical applications and make prospects for future research. This review provides perspectives and guidance for the rational design of highly active and stable acidic OER electrocatalysts based on PEMWE.

Co-doped RuO2 nanoparticles with enhanced catalytic activity and stability for the oxygen evolution reaction

Efficient and durable electrocatalysts for the oxygen evolution reaction (OER) play an important role in the use of hydrogen energy. Rutile RuO2, despite being considered as an advanced electrocatalyst for the OER, performs poorly in stability due to its easy oxidative dissolution at very positive (oxidizing) potentials. Herein, we report a type of Co-doped RuO2 nanoparticle for boosting OER catalytic activity and stability in alkaline solutions. The replacement of Ru by Co atoms with a lower ionic valence and smaller electronegativity can promote the generation of O vacancies and increase the electron density around Ru, thus enhancing the adsorption of oxygen species and inhibiting the peroxidative dissolution of RuO2 during the OER process. It was found that Ru0.95Co0.05Oy exhibited excellent OER performance with overpotentials as low as 217 mV at 10 mA cm-2 and 290 mV at 100 mA cm-2 in 1 M KOH, as well as outstanding stability in continuous testing for 50 h at a current density of 100 mA cm-2, and nearly no significant degradation after the accelerated durability test of 2000 cycles.

Nitrogen-Doped Carbon Dots Modified Fe-Co Sulfide Nanosheets as High-Efficiency Electrocatalysts toward Oxygen Evolution Reaction

Developing high-efficiency and stable oxygen evolution reaction (OER) electrocatalysts is an imperative requirement to produce green and clean hydrogen energy. In this work, the FeCoSy /NCDs composite with nitrogen-doped carbon dots (NCDs) modified Fe-Co sulfide (FeCoSy ) nanosheets is prepared by using a facile and mild one-pot solvothermal method. Benefiting from the low crystallinity and the synergistic effect between FeCoSy and NCDs, the optimal FeCoSy /NCDs-3 composite exhibits an overpotential of only 284 mV at 10 mA cm-2 , a small Tafel value of 52.1 mV dec-1 , and excellent electrochemical durability in alkaline solution. Remarkably, unlike ordinary metal sulfide electrocatalysts, the morphology, components, and structure of the FeCoSy /NCDs composite can be well retained after OER test. The NCDs modified FeCoSy composite with excellent electrocatalytic performance provides an effective approach to boost metal sulfide electrocatalysts for practical application.

Robust PbO2 modified by co-deposition of ZrO2 nanoparticles for efficient degradation of ceftriaxone sodium

In recent years, PbO2 electrodes have received widespread attention due to their high oxygen evolution reaction (OER) activity. However, due to the brittle nature of the plating layer, it is easy to cause the active layer to fall off. Pb2+ will leach out with the electrochemical process causing secondary pollution. The starting point of this study is established to improve the stability and adhesion of the electrode coating. Electrochemical oxidation technology has the characteristics of high treatment efficiency, wide range of applications, and non-polluting environment. In this study, conventional PbO2 electrodes were modified by using co-deposition of ZrO2 nanoparticles. In addition, α-PbO2 was added to increase the stability of the electrodes. At a high current density of 1 A/cm2, the accelerated life of the pure PbO2 electrode is 648 h, the accelerated life of the PbO2-ZrO2 electrode is 1.37 times that of the pure PbO2, and the electrode with an added α-PbO2 layer is 1.69 times that of the pure PbO2 electrode. The amount of dissolved Pb2+ was only 29% of that of pure PbO2. The electrochemical performance of the electrode is evaluated by studying the degradation effect of ceftriaxone sodium (CXM). The addition of ZrO2 nanoparticles alters the particle size and deposition content of PbO2, leading to a unique crystal structure distinct from pure PbO2. Compared to conventional PbO2 electrodes, the PbO2-ZrO2 can remove chemical oxygen demand (COD) and pollutants more efficiently, removing for 59% increased by 38.47%. Therefore, PbO2-ZrO2 is of great value in the field of electrochemical degradation of industrial pollutants.

One-Dimensional La0.2Sr0.8Cu0.4Co0.6O3-δ Nanostructures for Efficient Oxygen Evolution Reaction

Producing oxygen and hydrogen via the electrolysis of water has the advantages of a simple operation, high efficiency, and environmental friendliness, making it the most promising hydrogen production method. In this study, La0.2Sr0.8Cu0.4Co0.6O3-δ (LSCC) nanofibers were prepared by electrospinning to utilize non-noble perovskite oxides instead of noble metal catalysts for the oxygen evolution reaction, and the performance and electrochemical properties of LSCC nanofibers synthesized at different firing temperatures were evaluated. In an alkaline environment (pH = 14, 6 M KOH), the nanofibers calcined at 650 °C showed an overpotential of 209 mV at a current density of 10 mA cm-2 as well as good long-term stability. Therefore, the prepared LSCC-650 NF catalyst shows excellent potential for electrocatalytic oxygen evolution.

Stabilizing ruthenium dioxide with cation-anchored sulfate for durable oxygen evolution in proton-exchange membrane water electrolyzers

Ruthenium dioxide is the most promising alternative to the prevailing but expensive iridium-based catalysts for the oxygen evolution reaction in proton-exchange membrane water electrolyzers. However, the under-coordinated lattice oxygen of ruthenium dioxide is prone to over-oxidation, and oxygen vacancies are formed at high oxidation potentials under acidic corrosive conditions. Consequently, ruthenium atoms adjacent to oxygen vacancies are oxidized into soluble high-valence derivatives, causing the collapse of the ruthenium dioxide crystal structure and leading to its poor stability. Here, we report an oxyanion protection strategy to prevent the formation of oxygen vacancies on the ruthenium dioxide surface by forming coordination-saturated lattice oxygen. Combining density functional theory calculations, electrochemical measurements, and a suite of operando spectroscopies, we showcase that barium-anchored sulfate can greatly impede ruthenium loss and extend the lifetime of ruthenium-based catalysts during acidic oxygen evolution, while maintaining the activity. This work paves a new way for designing stable and active anode catalysts toward acidic water splitting.

Activating Commercial Nickel Foam to a Highly Efficient Electrocatalyst for Oxygen Evolution Reaction through a Three-Step Surface Reconstruction

It is highly desired to directly use commercial nickel foam (CNF) as an electrocatalyst for the oxygen evolution reaction (OER) via simple surface reconstruction. In our research, a simple three-step preactivation process was proposed to reconstruct CNF as an efficient OER catalyst, including calcination, high-voltage treatment, and immersing in electrolyte. The optimal CNF after three-step activation reaches an excellent OER performance of 228 and 267 mV at η10 and η100 in alkaline media and can tolerate long-term tests under a large current density of 500 mA·cm-2. The promotion of each step was explored. The calcination step leads to a reconstructive surficial morphology with an enlarged active surface, providing a prerequisite for the following construction steps. The high-voltage treatment changes the valence of surface Ni species, generating phases with higher catalytic activity, and the immersing process introduces Fe heteroatoms into the surface of CNF, boosting the catalytic performance of CNF through Ni-Fe interactions. This research provides a simple method of making high-performance catalysts with accessible nickel foam, a potential for large-scale application in practical industry, and new thinking for the manipulation of Ni-based catalysts.

Ir-Doped Bilayer Heterojunction Hollow Nanoboxes for Electrocatalytic Oxygen Evolution

The fabrication of hollow nanoelectrocatalysts with multilayered heterogeneous interfaces, derived from metal-organic framework (MOF) materials, represents a highly efficient strategy that promotes the oxygen evolution reaction (OER). Within this research, we successfully synthesized a hollow nanobox of Ir-doped ZIF-67@CoFe PBA with bilayer heterointerfaces. The distinctive structure of Ir-ZIF-67@CoFe PBA provides a substantial number of active sites for reaction intermediates, resulting in improved utilization of precious metals. Furthermore, experimental results indicate the outstanding electrocatalytic performance of the optimized Ir-ZIF-67@CoFe PBA, as indicated by a mere 269 mV overpotential at 10 mA·cm-2, accompanied by a small Tafel slope of 80.1 mV·dec-1. Moreover, the Schottky junction formed between the heterojunction and Ir within Ir-ZIF-67@CoFe PBA accelerates the electron-transfer rate, contributing to its exceptional catalytic performance compared to that of a catalyst derived solely from ZIF-67. This distinctive feature of the catalyst holds tremendous application value.

Room-Temperature Synthesis of Carbon-Nanotube-Interconnected Amorphous NiFe-Layered Double Hydroxides for Boosting Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is a key half-reaction in electrocatalytic water splitting. Large-scale water electrolysis is hampered by commercial noble-metal-based OER electrocatalysts owing to their high cost. To address these issues, we present a facile, one-pot, room-temperature co-precipitation approach to quickly synthesize carbon-nanotube-interconnected amorphous NiFe-layered double hydroxides (NiFe-LDH@CNT) as cost-effective, efficient, and stable OER electrocatalysts. The hybrid catalyst NiFe-LDH@CNT delivered outstanding OER activity with a low onset overpotential of 255 mV and a small Tafel slope of 51.36 mV dec-1, as well as outstanding long-term stability. The high catalytic capability of NiFe-LDH@CNT is associated with the synergistic effects of its room-temperature synthesized amorphous structure, bi-metallic modulation, and conductive CNT skeleton. The room-temperature synthesis can not only offer economic feasibility, but can also allow amorphous NiFe-LDH to be obtained without crystalline boundaries, facilitating long-term stability during the OER process. The bi-metallic nature of NiFe-LDH guarantees a modified electronic structure, providing additional catalytic sites. Simultaneously, the highly conductive CNT network fosters a nanoporous structure, facilitating electron transfer and O2 release and enriching catalytic sites. This study introduces an innovative approach to purposefully design nanoarchitecture and easily synthesize amorphous transition-metal-based OER catalysts, ensuring their cost effectiveness, production efficiency, and long-term stability.

Ruthenium-nickel oxide derived from Ru-coupled Ni metal-organic framework for effective oxygen evolution reaction

Developing Ru-based catalysts with both high activity and stability for the oxygen evolution reaction (OER) is very significant in the water electrolysis technique. Here, a bimetallic metal oxide catalyst (RuO2-NiO) derived from Ru-coupled Ni metal-organic framework (Ni-MOF) by using terephthalic acid as the ligand was successfully synthesized through a facile ultrasonic treatment and subsequent thermal annealing approach; and the effective role of the coupled effect between RuO2 and NiO in stabilizing Ru was found significant in OER catalysis. A relatively small d-band center due to the electronic structure regulation and synergistic effect of the heterostructure was found to cause weakened adsorption of surface oxygen species. Theoretical calculations demonstrated that the electronic modulation between RuO2 and NiO can significantly accelerate the dissociation of water and modulate the chemical adsorption of oxygen intermediates on the catalyst, thereby enhancing the OER activity of the catalyst. The optimized catalyst of RuO2-NiO afforded a current density of 10 mA cm-2 at low overpotentials of 210 mV toward OER, and good catalytic stability, kinetics and efficiency were also discussed. This remarkable catalytic performance can be attributed to the unique sheet-like structure and porous morphology of the catalyst with increased exposure of active sites and the coupling effect between RuO2 and NiO for moderate binding strength to the intermediates. This study showed an effective approach for bimetallic oxide catalyst fabrication and their applications in energy conversion reactions.

Electrostatic Self-Assembly of MXene on Ruthenium Dioxide-Modified Carbon Cloth for Electrochemical Detection of Kaempferol

A superior composite material consisting of MXene and ruthenium dioxide-modified carbon cloth is synthesized by pulsed laser deposition and electrostatic self-assembly, which is further utilized to construct a class of novel electrochemical (EC) sensors for kaempferol (KA) detection. The carbon-cloth-based electrodes modified by ruthenium dioxide and then MXene are characterized by X-ray diffraction, scanning electron microscope, and X-ray photoemission spectroscopy. The EC process on the modified electrodes is analyzed by cyclic voltammetry, EC impedance spectroscopy, and differential pulse voltammetry. It is found that positively charged RuO2 not only possesses the remarkable electrical conductivity and electrocatalysis activity but also hampers the restacking of MXene, which accordingly enhances the exposure of the active surface area and greatly boosts the electrocatalysis activity of the entire composite. Consequently, this newly developed composite-based EC sensor exhibits a high sensitivity, selectivity, and remarkable stability to detect KA with two linear ranges of 0.06-1 and 1-15 µM. The inferred limit of detection is 0.039 µM via differential pulse voltammetry. More importantly, this novel EC sensor is found to be applicable for detecting KA in practical traditional Chinese medicines.

Phytochemical-assisted green synthesis of CuFeOx nano-rose electrocatalysts for oxygen evolution reaction in alkaline media

This study represents a green synthesis method for fabricating an oxygen evolution reaction (OER) electrode by depositing two-dimensional CuFeO_x on nickel foam (NF). Two-dimensional CuFeO_x was deposited on NF using in situ hydrothermal synthesis in the presence of Aloe vera extract. This phytochemical-assisted synthesis of CuFeO_x resulted in a unique nano-rose-like morphology (petal diameter 30-70 nm), which significantly improved the electrochemical surface area of the electrode. The synthesized electrode was analyzed for its OER electrocatalytic activity and it was observed that using 75% Aloe vera extract in the phytochemical-assisted synthesis of CuFeO_x resulted in improved OER electrocatalytic performance by attaining an overpotential of 310 mV for 50 mA cm^-2 and 410 mV for 100 mA cm^-2. The electrode also sustained robust stability throughout the 50 h of chronopotentiometry studies under alkaline electrolyte conditions, demonstrating its potential as an efficient OER electrode material. This study highlights the promising use of Aloe vera extract as a green and cost-effective way to synthesize efficient OER electrode materials.

Heterostructure of NiFe@NiCr-LDH for Active and Durable Oxygen Evolution Reactions in Alkaline Media

Developing cost-effective, efficient, and durable catalysts for oxygen evolution reactions (OER) is the key for promoting large-scale H₂ production through electrochemical water splitting. Herein, we report a facile method for fabricating an NiFe@NiCr-LDH catalyst toward alkaline OER. The electronic microscopy technique revealed that it has a well-defined heterostructure at the interface between the NiFe and NiCr phases. In 1.0 M KOH, the as-prepared NiFe@NiCr-LDH catalyst shows excellent catalytic performance, evidenced by an overpotential of 266 mV at the current density of 10 mA cm^-2 and a small Tafel slope of 63 mV dec^-1; both are comparable with the RuO₂ benchmark catalyst. It also exhibits robust durability in long-term operation, manifested by a 10% current decay in 20 h, which is superior to that of the RuO₂ catalyst. Such excellent performance is attributed to the interfacial electron transfer that occurs at the interfaces of the heterostructure, and the Fe(III) species facilitate the formation of Ni(III) species as active sites in NiFe@NiCr-LDH. This study offers a feasible strategy for preparing a transition metal-based LDH catalyst for OER toward H₂ production and other electrochemical energy technologies.

Agarose-gel-based self-limiting synthesis of a bimetal (Fe and Co)-doped composite as a bifunctional catalyst for a zinc-air battery

Exploring efficient noble-metal-free electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial for the development of rechargeable Zn-air batteries. Herein, a self-limiting method using an agarose gel was proposed to prepare bimetallic (iron and cobalt) nitrogen-doped carbon composites (FeCo-NC). The resulting FeCo-NC catalyst has a high surface area and a hierarchical porous structure. The optimized FeCo-NC electrocatalyst exhibits a small potential difference (ΔE) = 0.72 V between the ORR half-wave potential and the OER potential at a current density of 10 mA cm^-2 in alkaline media. Impressively, the FeCo-NC Zn-air battery exhibits a high open-circuit voltage, large power density, and outstanding charge-discharge cycling stability. This study provides an effective means of designing electrocatalysts and energy conversion systems.

Dynamic Reconstructed RuO2 /NiFeOOH with Coherent Interface for Efficient Seawater Oxidation

Developing efficient oxygen evolution reaction (OER) electrocatalysts for seawater electrolysis is still a big challenge. Herein, a facile one-pot approach is reported to synthesize RuO₂ -incorporated NiFe-metal organic framework (RuO₂ /NiFe-MOF) with unique nanobrick-nanosheet heterostructure as precatalyst. Driven by electric field, the RuO₂ /NiFe-MOF dynamically reconstructs into RuO₂ nanoparticles-anchored NiFe oxy/hydroxide nanosheets (RuO₂ /NiFeOOH) with coherent interface, during which the dissolution and redeposition of RuO₂ are witnessed. Owing to the synergistic interaction between RuO₂ and NiFeOOH, the as-reconstructed RuO₂ /NiFeOOH exhibits outstanding alkaline OER activity with an ultralow overpotential of 187.6 mV at 10 mA cm^-2 and a small Tafel slope of 31.9 mV dec^-1 and excellent durability at high current densities of 840 and 1040 mA cm^-2 in 1 m potassium hydroxide (KOH). When evaluated for seawater oxidation, the RuO₂ /NiFeOOH only needs a low overpotential of 326.2 mV to achieve 500 mA cm^-2 and can continuously catalyze OER at 500 mA cm^-2 for 100 h with negligible activity degradation. Density function theory calculations reveal that the presence of strong interaction and enhanced charge transfer along the coherent interface between RuO₂ and NiFeOOH ensures improved OER activity and stability.

Mass Production of Sulfur-Tuned Single-Atom Catalysts for Zn-Air Batteries

Single-atom catalysts (SACs) show great potential for rechargeable Zn-air batteries (ZABs); however, scalable production of SACs from sustainable resources is difficult owing to poor control of the local coordination environment. Herein, lignosulfonate, a by-product of the papermaking industry, is utilized as a multifunctional bioligand for the mass production of SACs with highly active MN₄ S sites (M represents Fe, Cu, and Co) via strong metalnitrogen/sulfur coordination. This effectively adjusts the charge distribution and promotes the catalytic performance, leading to highly durable and excellent performance in oxygen reduction and evolution reactions for ZABs. This study paves the way for the industrial production of cost-effective SACs in a sustainable manner.

Ultrathin PdCu Nanosheet as Bifunctional Electrocatalysts for Formate Oxidation Reaction and Oxygen Reduction Reaction

The development of robust nonplatinum electrocatalysts to enhance the performance of formate oxidation reaction (FOR) and oxygen reduction reaction (ORR) is one of the key issues for the commercialization of direct formate fuel cells (DFFCs), but still challenging. Herein, a structurally controlled 3D flower-like PdCu nanosheet (NS) catalyst is synthesized by a method of oil bath reduction under mild conditions as a bifunctional electrocatalyst for DFFCs. Under the dual tuning on the composition and intermetallic phase, the PdCu nanosheet catalyst exhibits 8.67 times higher mass activity for anodic formate oxidation reaction than the commercial Pd/C. For the cathodic ORR, a positive shift half-wave potential is obtained for PdCu nanosheets exceeding Pt/C. Moreover, after a long-term stability test, the current density of the PdCu nanosheet catalyst for FOR and ORR can be well maintained with the least activity decay. When the PdCu NSs are used as optimized anode and cathode electrodes for DFFCs enable a peak power density as high as 53 mW cm^-2 at room temperature, which is about 1.3 times higher than that of the commercial Pd/C and Pt/C as anode and cathode electrodes. This work provides a potential strategy to improve the catalytic performance of non-Pt-based nanocatalysts.

Selectively Enhanced Electrocatalytic Oxygen Evolution within Nanoscopic Channels Fitting a Specific Reaction Intermediate for Seawater Splitting

Abundant availability of seawater grants economic and resource-rich benefits to water electrolysis technology requiring high-purity water if undesired reactions such as chlorine evolution reaction (CER) competitive to oxygen evolution reaction (OER) are suppressed. Inspired by a conceptual computational work suggesting that OER is kinetically improved via a double activation within 7 Å-gap nanochannels, RuO₂ catalysts are realized to have nanoscopic channels at 7, 11, and 14 Å gap in average (d_gap ), and preferential activity improvement of OER over CER in seawater by using nanochanneled RuO₂ is demonstrated. When the channels are developed to have 7 Å gap, the OER current is maximized with the overpotential required for triggering OER minimized. The gap value guaranteeing the highest OER activity is identical to the value expected from the computational work. The improved OER activity significantly increases the selectivity of OER over CER in seawater since the double activation by the 7 Å-nanoconfined environments to allow an OER intermediate (*OOH) to be doubly anchored to Ru and O active sites does not work on the CER intermediate (*Cl). Successful operation of direct seawater electrolysis with improved hydrogen production is demonstrated by employing the 7 Å-nanochanneled RuO₂ as the OER electrocatalyst.

Directional editing of self-supported nanoarray electrode for adaptive paired-electrolysis

Anodic oxidation assisted hydrogen production under mild conditions powered by renewable electricity represents a sustainable approach to energy conversion systems. Here, we fabricated a versatile and universal self-supported nanoarray platform that can be intelligently edited to achieve adaptive electrocatalysis for alcohol oxidation reactions and hydrogen evolution reaction (HER). The obtained self-supported nanoarray electrocatalysts exhibit excellent catalytic activity due to the integration of multiple merits of rich nanointerface-reconstruction and self-supported hierarchical structures. Particularly, the membrane-free pair-electrolysis system coupling HER and ethylene glycol oxidation reaction (EGOR) required an applied voltage of only 1.25 V to drive the current density of 10 mA cm^-2, which is about 510 mV lower than that of the overall water splitting, showing the capability to simultaneously produce H₂ and formate with high Faradic efficiency and stability. This work demonstrates a catalytic self-supported nanoarray platform for energy-efficient production of high-purity H₂ and value-added chemicals.

Ce-Modified Flowerlike NiFe-MOF Nanostructure Based on Ion Competitive Coordination for Enhancing the Oxygen Evolution Reaction

Metal-organic framework (MOF) has become a popular electrocatalyst for the oxygen evolution reaction (OER) because of its large specific surface area and adjustable porosity. Nevertheless, the electrochemical performance of MOFs has been greatly limited by poor intrinsic conductivity and catalytic activity. Herein, we report a Ce-doped nanoflower-like MOF material Ce@NiFe-MOF-5 via a facile ion competitive coordination effect and doping method. Benefiting from the nanoflower structure formed by the stacking of nanosheets, a large number of active sites can be exposed, which favors electron/mass transfer during water oxidation. The coordination substitution of Ce ions not only promoted an increase in the number of active sites on the surface of the nanosheets but also optimized the electronic structure of pristine NiFe-MOF. The well-designed Ce@NiFe-MOF-5 catalysts exhibited superior OER performance under basic conditions, which only required an overpotential of 258 mV at a current density of 10 mA cm^-2 and a Tafel slope of 54.44 mV dec^-1. Moreover, when Ce@NiFe-MOF-5 served as an anode and Pt/C as a cathode, the two-electrode system only needed 1.56 V to drive overall water splitting at 10 mA cm^-2.

Strategies for Promoting Catalytic Performance of Ru-based Electrocatalysts towards Oxygen/Hydrogen Evolution Reaction

Ru-based materials hold great promise for substituting Pt as potential electrocatalysts toward water electrolysis. Significant progress is made in the fabrication of advanced Ru-based electrocatalysts, but an in-depth understanding of the engineering methods and induced effects is still in their early stage. Herein, we organize a review that focusing on the engineering strategies toward the substantial improvement in electrocatalytic OER and HER performance of Ru-based catalysts, including geometric structure, interface, phase, electronic structure, size, and multicomponent engineering. Subsequently, the induced enhancement in catalytic performance by these engineering strategies are also elucidated. Furthermore, some representative Ru-based electrocatalysts for the electrocatalytic HER and OER applications are also well presented. Finally, the challenges and prospects are also elaborated for the future synthesis of more effective Ru-based catalysts and boost their future application.

Dimension Engineering in Noble-Metal-Based Electrocatalysts for Water Splitting

Dimension engineering plays a critical role in determining the electrocatalytic performance of catalysts towards water electrolysis since it is highly sensitive to the surface and interface properties. Bearing these considerations into mind, intensive efforts have been devoted to the rational dimension design and engineering, and many advanced nanocatalysts with multidimensions have been successfully fabricated. Aiming to provide more guidance for the fabrication of highly efficient noble-metal-based electrocatalysts, this review has focused on the recent progress in dimension engineering of noble-metal-based electrocatalysts towards water splitting, including the advanced engineering strategies, the application of noble-metal-based electrocatalysts with distinctive geometric structure from 0D to 1D, 2D, 3D, and multidimensions. In addition, the perspective insights and challenges of the dimension engineering in the noble-metal-based electrocatalysts is also systematically discussed.

Self-Reconstruction of Fe-Doped Co-Metal-Organic Frameworks Boosted Electrocatalytic Performance for Oxygen Evolution Reaction

Rational design of facile and low-cost efficient electrocatalysts for oxygen evolution reaction (OER) is crucial to solve the energy crisis. Benefiting from in situ self-reconstruction from metal-organic frameworks (MOFs) to (oxy)hydroxides in alkaline electrolytes, MOFs have become alternative OER catalysts. Thus, Fe-doped Co-MOF nanosheets (Co-MOF/Fe) were prepared and utilized straightforwardly as OER electrocatalysts. CoFe-layered bimetallic hydroxides (CoFe-LDHs) with abundant active sites are obtained from in situ conversion of Co-MOF/Fe after etching by the KOH electrolyte, which are generally actual active species. Meanwhile, the introduction of Fe ions will also produce a synergistic effect that greatly improves the electrocatalytic OER performance. The optimized catalyst (Co-MOF/Fe₁₀) shows exceptional OER activity (η₁₀ = 260 mV) and excellent durability over 50 h. The outstanding OER performance of Co-MOF/Fe₁₀ can also be reflected in the two-electrode hydrolyzer (1.57 V at 10 mA cm^-2). This study offers a pathway to probe the catalytic mechanism of MOFs and the rational construction of efficient MOF-derived catalysts.

Recent Advances in Anode Electrocatalysts for Direct Formic Acid Fuel Cell-II-Platinum-Based Catalysts

Platinum-based catalysts have a long history of application in formic acid oxidation (FAO). The single metal Pt is active in FAO but expensive, scarce, and rapidly deactivates. Understanding the mechanism of FAO over Pt important for the rational design of catalysts. Pt nanomaterials rapidly deactivate because of the CO poisoning of Pt active sites via the dehydration pathway. Alloying with another transition metal improves the performance of Pt-based catalysts through bifunctional, ensemble, and steric effects. Supporting Pt catalysts on a high-surface-area support material is another technique to improve their overall catalytic activity. This review summarizes recent findings on the mechanism of FAO over Pt and Pt-based alloy catalysts. It also summarizes and analyzes binary and ternary Pt-based catalysts to understand their catalytic activity and structure relationship.

CoFeNiMnZnB as a High-Entropy Metal Boride to Boost the Oxygen Evolution Reaction

High-entropy materials offer numerous advantages as catalysts, including a flexible composition to tune the catalytic activity and selectivity and a large variety of adsorption/reaction sites for multistep or multiple reactions. Herein, we report on the synthesis, properties, and electrocatalytic performance of an amorphous high-entropy boride based on abundant transition metals, CoFeNiMnZnB. This metal boride provides excellent performance toward the oxygen evolution reaction (OER), including a low overpotential of 261 mV at 10 mA cm^-2, a reduced Tafel slope of 56.8 mV dec^-1, and very high stability. The outstanding OER performance of CoFeNiMnZnB is attributed to the synergistic interactions between the different metals, the leaching of Zn ions, the generation of oxygen vacancies, and the in situ formation of an amorphous oxyhydroxide at the CoFeNiMnZnB surface during the OER.

Hydrogen evolution reaction catalysis on RuM (M = Ni, Co) porous nanorods by cation etching

The development of efficient and stable nanomaterial electrocatalysts for the hydrogen evolution reaction (HER) is of great significance for renewable energy conversion via water electrolysis. Herein, we have developed a novel class of bimetallic RuM (M = Ni, Co) hollow nanorods (HNRs) through a facile Fe³⁺ etching strategy, as electrocatalysts for enhancing the HER. Morphological physical characterization and electrochemical tests demonstrated that RuM (M = Ni, Co) HNRs with hollow structures can effectively enhance electrocatalytic activity due to their high specific surface areas. Impressively, the RuNi HNRs exhibited superior HER performance with an overpotential of merely 25.6 mV in 1 M KOH solution at 10 mA cm^-2, which is significantly lower than that of commercial Pt/C (44.7 mV). Moreover, the as prepared RuNi HNRs showed excellent stability and could continuously work at a current density of 10 mA cm^-2 for 40 h with a negligible increase in potential. The Ru-based HNRs also showed high HER activity in an acidic solution. This study paves a new way for the universal fabrication of bimetallic hollow structured nanomaterials as efficient electrocatalysts for boosting the HER.

Defect and Interface Engineering of Three-Dimensional Open Nanonetcage Electrocatalysts for Advanced Electrocatalytic Oxygen Evolution Reaction

Defect engineering and interface engineering are two efficient approaches to promote the electrocatalytic performance of transition metal oxides (TMOs) by modulating the local electronic structure and inducing a synergistic effect but usually require costly and complicated processes. Herein, a facile electrochemical etching method is proposed for the controllable tailoring of the defects in a three-dimensional (3D) open nanonetcage CoZnRuO_x heterostructure via the in situ electrochemical etching to remove partial ZnO. The highly open 3D nanostructures, numerous defects, and multicomponent heterointerfaces endow the CoZnRuO_x nanonetcages with more accessible active sites, moderated local electronic structure, and strong synergistic effect, thereby enabling them to not only deliver an ultralow overpotential (244 mV @ 10 mA cm^-2) for oxygen evolution reaction (OER) but also high-performance overall water electrolysis by coupling with commercial Pt/C, with a potential of 1.52 V at 10 mA cm^-2. Moreover, experiments and characterizations also reveal that the remaining Zn²⁺ can facilitate OH^- adsorption and charge transfer, which also further improves the electrocatalytic OER performance. This work proposes a promising strategy for creating surface defects in heterostructured TMOs and provides insights to understand the defect- and interface-induced enhancement of OER electrocatalysis.

Ru doping boosts electrocatalytic water splitting

Heteroatom doping plays a crucial role in improving the electrocatalytic performance of catalysts towards water splitting. Owing to the existence of Ru-O moieties, Ru is thus emerging as an ideal dopant for promoting the electrocatalytic performance for water splitting by modifying the electronic structure, introducing extra active sites, improving electronic conductivity, and inducing a strong synergistic effect. Benefitting from these advantages, Ru-doped nanomaterials have been widely investigated and employed as advanced electrocatalysts for water splitting, and many excellent Ru-doped electrocatalysts have been successfully developed. In an effort to obtain a better understanding of the influence of Ru doping on the electrocatalytic water splitting performance of nanocatalysts, we herein summarize the recent progress of Ru-doped electrocatalysts by focusing on the synthesis strategies and advantageous merits. Applications of these new materials in water electrolysis technology are also discussed with emphasis on future directions in this active field of research.