Ir nanoclusters confined within hollow MIL-101(Fe) for selective hydrogenation of α,β-unsaturated aldehyde

Interfacial Electronic Interactions Between Ultrathin NiFe-MOF Nanosheets and Ir Nanoparticles Heterojunctions Leading to Efficient Overall Water Splitting

Creating specific noble metal/metal-organic framework (MOF) heterojunction nanostructures represents an effective strategy to promote water electrolysis but remains rather challenging. Herein, a heterojunction electrocatalyst is developed by growing Ir nanoparticles on ultrathin NiFe-MOF nanosheets supported by nickel foam (NF) via a readily accessible solvothermal approach and subsequent redox strategy. Because of the electronic interactions between Ir nanoparticles and NiFe-MOF nanosheets, the optimized Ir@NiFe-MOF/NF catalyst exhibits exceptional bifunctional performance for the hydrogen evolution reaction (HER) (η10 = 15 mV, η denotes the overpotential) and oxygen evolution reaction (OER) (η10 = 213 mV) in 1.0 m KOH solution, superior to commercial and recently reported electrocatalysts. Density functional theory calculations are used to further investigate the electronic interactions between Ir nanoparticles and NiFe-MOF nanosheets, shedding light on the mechanisms behind the enhanced HER and OER performance. This work details a promising approach for the design and development of efficient electrocatalysts for overall water splitting.

Construction of Phosphorothiolated 2-Pyrrolidinones via Photoredox/Copper-Catalyzed Cascade Radical Cyclization/Phosphorothiolation

A photoredox/copper-catalyzed cascade radical cyclization/phosphorothiolation reaction of N-allylbromoacetamides and P(O)SH compounds has been established. A broad range of novel nonfluorine- or difluoro-substituted 2-pyrrolidinones bearing the C(sp3)-SP(O)(OR)2 moiety can be conveniently constructed in moderate to good yields under mild conditions. Importantly, most of the tested phosphorothiolated 2-pyrrolidinones showed potent inhibitory effects toward both AChE and BChE.

Ir-CoO Active Centers Supported on Porous Al2 O3 Nanosheets as Efficient and Durable Photo-Thermal Catalysts for CO2 Conversion

Photo-thermal catalytic CO₂ hydrogenation is currently extensively studied as one of the most promising approaches for the conversion of CO₂ into value-added chemicals under mild conditions; however, achieving desirable conversion efficiency and target product selectivity remains challenging. Herein, the fabrication of Ir-CoO/Al₂ O₃ catalysts derived from Ir/CoAl LDH composites is reported for photo-thermal CO₂ methanation, which consist of Ir-CoO ensembles as active centers that are evenly anchored on amorphous Al₂ O₃ nanosheets. A CH₄ production rate of 128.9 mmol g_cat⁻ ¹ h⁻¹  is achieved at 250 °C under ambient pressure and visible light irradiation, outperforming most reported metal-based catalysts. Mechanism studies based on density functional theory (DFT) calculations and numerical simulations reveal that the CoO nanoparticles function as photocatalysts to donate electrons for Ir nanoparticles and meanwhile act as "nanoheaters" to effectively elevate the local temperature around Ir active sites, thus promoting the adsorption, activation, and conversion of reactant molecules. In situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) demonstrates that illumination also efficiently boosts the conversion of formate intermediates. The mechanism of dual functions of photothermal semiconductors as photocatalysts for electron donation and as nano-heaters for local temperature enhancement provides new insight in the exploration for efficient photo-thermal catalysts.

A dispersive solid-phase extraction method for the determination of Aristolochic acids in Houttuynia cordata based on MIL-101(Fe): An analytes-oriented adsorbent selection design

In view of the molecular structure of Aristolochic acid I (AA-I) and Aristolochic acid II (AA-II), MIL-101(Fe) was selected as the sorbent to develop a dispersive solid-phase extraction (d-SPE) method for capturing the two analytes from Houttuynia cordata. The interactions between the sorbent and analytes were investigated by FT-IR, XPS and UV-Vis DRS spectra. The optimized method demonstrated good linearity with R² > 0.9999. The limit of detections (LODs) were 0.007 mg/L and 0.014 mg/L for AA-I and AA-II, respectively, lower than the limit stipulated by Chinese Pharmacopoeia (0.001 %, w/w). The recoveries for AA-I and AA-II were within the range of 73.3-106.4 %. The precisions of intra-day and inter-day were 0.9-5.8 % and 2.1-5.8 %, respectively. Thus, the established method demonstrated to be efficient and reliable to determine AA-I and AA-II in Houttuynia cordata.

Highly Efficient Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol over CoRe/TiO2 Catalyst

Allylic alcohols typically produced through selective hydrogenation of α,β-unsaturated aldehydes are important intermediates in fine chemical industry, but it is still a challenge to achieve its high selectivity transformation. Herein, we report a series of TiO₂-supported CoRe bimetallic catalysts for the selective hydrogenation of cinnamaldehyde (CAL) to cinnamyl alcohol (COL) using formic acid (FA) as a hydrogen donor. The resultant catalyst with the optimized Co/Re ratio of 1:1 can achieve an exceptional COL selectivity of 89% with a CAL conversion of 99% under mild conditions of 140 °C for 4 h, and the catalyst can be reused four times without loss of activity. Meanwhile, the Co₁Re₁/TiO₂/FA system was efficient for the selective hydrogenation of various α,β-unsaturated aldehydes to the corresponding α,β-unsaturated alcohols. The presence of ReO_x on the Co₁Re₁/TiO₂ catalyst surface was advantageous to the adsorption of C=O, and the ultrafine Co nanoparticles provided abundant hydrogenation active sites for the selective hydrogenation. Moreover, FA as a hydrogen donor improved the selectivity to α,β-unsaturated alcohols.

Inert metal induces the modulation of unsaturated aldehyde absorption mode for enhanced selective hydrogenation

Selective hydrogenation of α,β-unsaturated aldehydes to obtain a high yield of unsaturated alcohols is important in industrial production. This is still a great challenge because it is thermally more favorable for the hydrogenation of CC than for the CO bond. Various strategies have been developed to optimize the catalysts for improving selectivity but are usually accompanied by the sacrifice of catalytic activity. Herein, we adopt the inert metal inducement strategy to synthesize a series of Ir-M alloy nanoparticle catalysts. The optimal catalyst IrCd₅ exhibits impressive catalytic performance in the selective hydrogenation of cinnamaldehyde, achieving 96.7% conversion with 94.3% selectivity for cinnamal alcohol, which is far superior to that of the Ir counterpart. Furthermore, the H₂ temperature-programmed desorption (H₂-TPD) test, styrene-TPD test, surface valence band test and density functional theory calculations demonstrate that the adsorption mode of cinnamaldehyde shifted from parallel to vertical configurations after introducing an inert metal. Compared to Ir, the weaker adsorption of alkene and stronger adsorption of the substrate for IrCd₅ lead to the prior adsorption and hydrogenation of the CO bond, thus elevating the selectivity of the cinnamal alcohol. This strategy disperses precious metal nanoparticles effectively, maximizes atomic utilization, and improves the selectivity, which provides a new avenue to design bimetal alloy catalysts for the selective hydrogenation of α,β-unsaturated aldehydes.