Compared effects of “solid-based” hydrogen peroxide pretreatment on disintegration and properties of waste activated sludge

Enhancing simultaneous nitrogen and phosphorus availability through biochar addition during Chinese medicinal herbal residues composting: Synergism of microbes and humus

The disposal of Chinese medicinal herbal residues (CMHRs) derived from Chinese medicine extraction poses a significant environmental challenge. Aerobic composting presents a sustainable treatment method, yet optimizing nutrient conversion remains a critical concern. This study investigated the effect and mechanism of biochar addition on nitrogen and phosphorus transformation to enhance the efficacy and quality of compost products. The findings reveal that incorporating biochar considerably enhanced the process of nutrient conversion. Specifically, biochar addition promoted the retention of bioavailable organic nitrogen and reduced nitrogen loss by 28.1 %. Meanwhile, adding biochar inhibited the conversion of available phosphorus to non-available phosphorus while enhancing its conversion to moderately available phosphorus, thereby preserving phosphorus availability post-composting. Furthermore, the inclusion of biochar altered microbial community structure and fostered organic matter retention and humus formation, ultimately affecting the modification of nitrogen and phosphorus forms. Structural equation modeling revealed that microbial community had a more pronounced impact on bioavailable organic nitrogen, while humic acid exerted a more significant effect on phosphorus availability. This research provides a viable approach and foundation for regulating the levels of nitrogen and phosphorus nutrients during composting, serving as a valuable reference for the development of sustainable utilization technologies pertaining to CMHRs.

Comprehensive review of microbial production of medium-chain fatty acids from waste activated sludge and enhancement strategy

Microbial production of versatile applicability medium-chain fatty acids (MCFAs) (C6-C10) from waste activated sludge (WAS) provides a pioneering approach for wastewater treatment plants (WWTPs) to achieve carbon recovery. Mounting studies emerged endeavored to promote the MCFAs production from WAS while struggling with limited MCFAs production and selectivity. Herein, this review covers comprehensive introduction of the transformation process from WAS to MCFAs and elaborates the mechanisms for unsatisfactory MCFAs production. The enhancement strategies for biotransformation of WAS to MCFAs was presented. Especially, the robust performance of iron-based materials is highlighted. Furthermore, knowledge gaps are identified to outline future research directions. Recycling MCFAs from WAS presents a promising option for future WAS treatment, with iron-based materials emerging as a key regulatory strategy in advancing the application of WAS-to-MCFAs biotechnology. This review will advance the understanding of MCFAs recovery from WAS and promote sustainable resource management in WWTPs.

Comparison of different sewage sludge pretreatment technologies for improving sludge solubilization and anaerobic digestion efficiency: A comprehensive review

Anaerobic digestion (AD) of sewage sludge reduces organic solids and produces methane, but the complex nature of sludge, especially the difficulty in solubilization, limits AD efficiency. Pretreatments, by destroying sludge structure and promoting disintegration and hydrolysis, are valuable strategies to enhance AD performance. There is a plethora of reviews on sludge pretreatments, however, quantitative comparisons from multiple perspectives across different pretreatments remain scarce. This review categorized various pretreatments into three groups: Physical (ultrasonic, microwave, thermal hydrolysis, electric decomposition, and high pressure homogenization), chemical (acid, alkali, Fenton, calcium peroxide, and ozone), and biological (microaeration, exogenous bacteria, and exogenous hydrolase) pretreatments. The optimal conditions of various pretreatments and their impacts on enhancing AD efficiency were summarized; the effects of different pretreatments on microbial community in the AD system were comprehensively compared. The quantitative comparison based on dissolution degree of COD (DDCOD) indicted that the sludge solubilization performance is in the order of physical, chemical, and biological pretreatments, although with each below 40 % DDCOD. Biological pretreatment, particularly microaeration and exogenous bacteria, excel in AD enhancement. Pretreatments alter microbial ecology, favoring Firmicutes and Methanosaeta (acetotrophic methanogens) over Proteobacteria and Methanobacterium (hydrogenotrophic methanogens). Most pretreatments have unfavorable energy and economic outcomes, with electric decomposition and microaeration being exceptions. On the basis of the overview of the above pretreatments, a full energy and economy assessment for sewage sludge treatment was suggested. Finally, challenges associated with sludge pretreatments and AD were analyzed, and future research directions were proposed. This review may broaden comprehension of sludge pretreatments and AD, and provide an objective basis for the selection of sludge pretreatment technologies.

Application of calcium peroxide in promoting resource recovery from municipal sludge: A review

The harmless disposal, resource recovery, and synergistic efficiency reduction of municipal sludge have been the research focuses for the last few years. Calcium peroxide (CaO2) is a multifunctional and safe peroxide that produces an alkaline oxidation environment to promote the fermentation of municipal sludge to produce hydrogen (H2) and volatile fatty acids (VFAs), thus realizing sludge resource recovery. This review outlines the research achievements of CaO2 in sludge resource recovery, improvement of sludge dewaterability, and removal of pollutants from sludge in recent years. Meanwhile, the mechanism of CaO2 and its influencing factors have also been comprehensively summarized. Finally, the future development direction of the application of CaO2 in municipal sludge is prospected. This review would provide theoretical reference for the potential engineering applications of CaO2 in improving sludge treatment in the future.

Bioremediation of hazardous heavy metals by marine microorganisms: a recent review

Heavy metals (HMs) like Zn, Cu, Pb, Ni, Cd, and Hg, among others, play a role in several environmental problems. The marine environment is polluted by several contaminants, such as HMs. A variety of physico-chemical methods usually available for sanitation HMs remediation suffer from either limitation. Bioremediation is a promising way of dealing with HMs pollution. Microbes have the ability with various potencies to resist HMs tension. The current review discusses the main sources and influences of HMs, the role of marine microorganisms in HMs bioremediation, as well as the microbial mechanisms for HMs detoxification and transformation. This review paper aims to provide an overview of the bioremediation technologies that are currently available for the removal of HMs ions from industrial and urban effluent by aquatic organisms such as bacteria, fungi, and microalgae, particularly those that are isolated from marine areas. The primary goals are to outline various studies and offer helpful information about the most important aspects of the bioelimination techniques. The biotreatment practices have been primarily divided into three techniques based on this topic. They are biosorption, bioaccumulation, bioleaching, and biotransformation. This article gives the brief view on the research studies about bioremediation of HMs using marine microorganisms. The current review also deals with the critical issues and recent studies based on the HMs biodetoxification using aquatic microorganisms.

Enhanced humus synthesis from Chinese medicine residues composting by lignocellulose-degrading bacteria stimulation: Upregulation of key enzyme activity and neglected indirect effects on humus formation

Chinese medicine residues (CMHRs) resource is attracting widespread attention, as it is expected to be produced into Humus-rich fertilizer for soil application. This study aimed to promote effective humus (HS) production through lignocellulose-degrading bacteria (LDB) addition and explore the biological regulation mechanism of LDB affecting lignocellulose-to-humus conversion. The results showed higher HS production was achieved, with 109.73 and 111.44 g·kg-1, and HA/FA was raised by 12.70-16.02 % in compost products by LDB addition stimulation. Significant upregulation of β-glucanase and xylanase activities catalyzed higher decomposition of lignocellulose toward more HS potential precursors supply. Furthermore, exogenous LDB intervention induced microbial community restructure and microbial network establishment via enriching synergism functional bacteria, i.e., Thermobifida, Paenibacillus, Nonomuraea, etc. Mantel test results showed that it was variation of cellulose, hemicellulose and HS that affected microbial community succession (p < 0.01, r > 0.6), which represented the positive action of LDB addition stimulation on HS synthesis upregulation. Further exploration suggested LDB had an indirect effect on HS formation by enhanced lignin and hemicellulose conversion based on the Random Forest model and Partial least-squares path modeling results. This research provides new insights into the trigger effects of LDB introduction on upregulating HS synthesis and is expected to propose new perspectives for HS efficient production in CMHRs composting.

Enhanced Oxidation of Organic Compounds by the Ferrihydrite-Ferrate System: The Role of Intramolecular Electron Transfer and Intermediate Iron Species

Previous studies mostly held that the oxidation capacity of ferrate depends on the involvement of intermediate iron species (i.e., FeIV/FeV), however, the potential role of the metastable complex was disregarded in ferrate-based heterogeneous catalytic oxidation processes. Herein, we reported a complexation-mediated electron transfer mechanism in the ferrihydrite-ferrate system toward sulfamethoxazole (SMX) degradation. A synergy between intermediate FeIV/FeV oxidation and the intramolecular electron transfer step was proposed. Specifically, the conversion of phenyl methyl sulfoxide (PMSO) to methyl phenyl sulfone (PMSO2) suggested that FeIV/FeV was involved in the oxidation of SMX. Moreover, based on the in situ Raman test and chronopotentiometry analysis, the formation of the metastable complex of ferrihydrite/ferrate was found, which possesses higher oxidation potential than free ferrate and could achieve the preliminary oxidation of organics via the electron transfer step. In addition, the amino group of SMX could complex with ferrate, and the resulting metastable complex of ferrihydrite/ferrate would combine further with SMX molecules, leading to intramolecular electron transfer and SMX degradation. The ferrate loss experiments suggested that ferrihydrite could accelerate the decomposition of ferrate. Finally, the effects of pH value, anions, humic acid, and actual water on the degradation of SMX by ferrihydrite-ferrate were also revealed. Overall, ferrihydrite demonstrated high catalytic capacity, good reusability, and nontoxic performance for ferrate activation. The ferrihydrite-ferrate process may be a green and promising method for organic removal in wastewater treatment.

Attenuation effects of ZVI/PDS pretreatment on propagation of antibiotic resistance genes in bioreactors: Driven by antibiotic residues and sulfate assimilation

Sulfate radical-based advanced oxidation processes (AOPs) combined biological system was a promising technology for treating antibiotic wastewater. However, how pretreatment influence antibiotic resistance genes (ARGs) propagation remains largely elusive, especially the produced by-products (antibiotic residues and sulfate) are often ignored. Herein, we investigated the effects of zero valent iron/persulfate pretreatment on ARGs in bioreactors treating sulfadiazine wastewater. Results showed absolute and relative abundance of ARGs reduced by 59.8%- 81.9% and 9.1%- 52.9% after pretreatments. The effect of 90-min pretreatment was better than that of the 30-min. The ARGs reduction was due to decreased antibiotic residues and stimulated sulfate assimilation. Reduced antibiotic residues was a major factor in ARGs attenuation, which could suppress oxidative stress, inhibit mobile genetic elements emergence and resistant strains proliferation. The presence of sulfate in influent supplemented microbial sulfur sources and facilitated the in-situ synthesis of antioxidant cysteine through sulfate assimilation, which drove ARGs attenuation by alleviating oxidative stress. This is the first detailed analysis about the regulatory mechanism of how sulfate radical-based AOPs mediate in ARGs attenuation, which is expected to provide theoretical basis for solving concerns about by-products and developing practical methods to hinder ARGs propagation.

Insight into Chinese medicine residue biochar combined with ultrasound for persulfate activation in atrazine degradation: Acanthopanax senticosus precursors, synergistic effects and toxicity assessment

The synergistic activation of persulfate by multiple factors could degrade pollutants more efficiently. However, the co-activation method based on metal ions has the risk of leakage. The non-metallic coupling method could achieve the same efficiency as the metal activation and meanwhile release environmental stress. In this study, the original biochar (BC) was prepared through using Chinese medicinal residue of Acanthopanax senticosus as the precursor. Compared with other biochar, the pore size structure was higher and toxicity risk was lower. The ultrasonic (US)/Acanthopanax senticosus biochar (ASBC)/persulfate oxidation system was established for Atrazine (ATZ). Results showed that 45KHz in middle and low frequency band cooperated with ASBC600 to degrade nearly 70 % of ATZ within 50 min, and US promoted the formation of SO₄^- and OH. Meanwhile, the synergy index of US and ASBC was calculated to be 1.18, which showed positive synergistic effect. Finally, the potential toxicity was examined by using Toxicity Characteristic Leaching Procedure (TCLP) and luminescent bacteria. This study provides a promising way for the activation of persulfate, which is expected to bring a new idea for the win-win situation of pollutant degradation and solid waste resource utilization.

Effect of exogenous CaO addition on H2S production from waste activated sludge and its influence mechanism

Hydrogen sulfide (H₂S) production from waste activated sludge (WAS) is the main reason for odor emission during anaerobic fermentation system. CaO has been reported to effectively improve the resources recovery of WAS, but its potential effect on H₂S production in anaerobic fermentation process remains unrecognized. In present study, it was found that the addition of 60 mg/g VSS CaO greatly inhibited H₂S production and the maximum yield of H₂S was 60.1 ± 1.8% lower than the control. Mechanism investigation demonstrated that CaO destroyed sludge structure and increased the release of intracellular organic matter with hydrogen bonding networks destroying, but had a mild effect on the transformation of sulfur containing organic matters and inorganic sulfate reduction. Additionally, the enhancement in H⁺ and S^2- consumption by alkaline condition and metal ions release was another reason for the inhibition of H₂S production in CaO addition reactors. Furthermore, microbial analysis showed that CaO addition importantly reduced the hydrolysis microorganism, particularly denitrification hydrolytic bacterias (e.g., unclassified_f_Chitinophagaceae and Dechloromonas), sulfate reducing bacterias (SRBs) (e.g., unclassified_c_Deltaproteobacteria and Desulfosarcina) and genes (e.g., PepD, cysN/D, CysH/C and Sir) involved in organic sulfur hydrolysis and sulfate reduction. Results from this study provides theoretical insights into the practical applications of CaO.

A rapid and simplified method for evaluating the performance of fungi-algae pellets: A hierarchical analysis model

Microbial pellets technology has undergone extensive research recently and has increasingly matured, showing significant promise. However, the performance of microbial pellets cannot be predicted quickly by the current evaluating methods because they are complicated to operate, take a long time, and pose a risk to the environment. In this study, a representative microbial pellet, fungi-algae pellet, was selected as the research object. Eight evaluation parameters and four evaluation indices were chosen to construct the performance evaluation system of the fungal-algal pellets using the analytic hierarchy process (AHP) and weighting method. Combining the correlation analysis and expert opinion, we found that among the eight parameters selected, the adsorption saturation rate of mycelial pellets on algae had the most significant influence weight on the performance of fungi-algae pellet, followed by algal culture time and fungal incubation time. This research proposes and validates the Performance Evaluation Value (PEV) of fungi-algae pellet and its calculation method. We also discuss the effectiveness of this new evaluation system in saving time, cost, and emission reductions. The results of this paper enable the rapid evaluation of fungi-algae pellets and promote the better development of fungi-algae pellets technology and even other multi-microbial symbiotic pellet technologies.

Dissecting the roles of conductive materials in attenuating antibiotic resistance genes: Evolution of physiological features and bacterial community

Supplying conductive materials (CMs) into anaerobic bioreactors is considered as a promising technology for antibiotic wastewater treatment. However, whether and how CMs influence antibiotic resistance genes (ARGs) spread remains poorly known. Here, we investigated the effects of three CMs, i.e., magnetite, activated carbon (AC), and zero valent iron (ZVI), on ARGs dissemination during treating sulfamethoxazole wastewater, by dissecting the shifts of physiological features and microbial community. With the addition of magnetite, AC, and ZVI, the SMX removal was improved from 49.05 to 71.56-92.27 %, while the absolute abundance of ARGs reducing by 26.48 %, 61.95 %, 48.45 %, respectively. The reduced mobile genetic elements and antibiotic resistant bacteria suggested the inhibition of horizontal and vertical transfer of ARGs. The physiological features, including oxidative stress response, quorum sensing, and secretion system may regulate horizontal transfer of ARGs. The addition of all CMs relieved oxidative stress compared with no CMs, but ZVI may cause additional free radicals that needs to be concerned. Further, ZVI and AC also interfered with cell communication and secretion system. This research deepens the insights about the underlying mechanisms of CMs in regulating ARGs, and is expected to propose practical ways for mitigating ARGs proliferation.