Activation of peracetic acid by metal-organic frameworks (ZIF-67) for efficient degradation of sulfachloropyridazine

Efficient activation of peracetic acid by cobalt modified nitrogen-doped carbon nanotubes for drugs degradation: Performance and mechanism insight

Peracetic acid (PAA) has garnered significant attention as a novel disinfectant owing to its remarkable oxidative capacity and minimal potential to generate byproducts. In this study, we prepared a novel catalyst, denoted as cobalt modified nitrogen-doped carbon nanotubes (Co@N-CNTs), and evaluated it for PAA activation. Modification with cobalt nanoparticles (∼4.8 nm) changed the morphology and structure of the carbon nanotubes, and greatly improved their ability to activate PAA. Co@N-CNTs/PAA catalytic system shows outstanding catalytic degradation ability of antiviral drugs. Under neutral conditions, with a dosage of 0.05 g/L Co@N-CNT-9.8 and 0.25 mM PAA, the removal efficiency of acyclovir (ACV) reached 98.3% within a mere 10 min. The primary reactive species responsible for effective pollutant degradation were identified as acetylperoxyl radicals (CH3C(O)OO•) and acetyloxyl radicals (CH3C(O)O•). In addition, density functional theory (DFT) proved that Co nanoparticles, as the main catalytic sites, were more likely to adsorb PAA and transfer more electrons than N-doped graphene. This study explored the feasibility of PAA degradation of antiviral drugs in sewage, and provided new insights for the application of heterogeneous catalytic PAA in environmental remediation.

Hierarchical Porous Bimetallic FeMn Metal-Organic Framework Gel for Efficient Activation of Peracetic Acid in Antibiotic Degradation

Effective techniques for eliminating antibiotics from water environments are in high demand. The peracetic acid (PAA)-based advanced oxidation process has recently drawn increasing attention for its effective antibiotic degrading capability. However, current applications of PAA-based techniques are limited and tend to have unsatisfactory performance. An additional catalyst for PAA activation could provide a promising solution to improve the performance of PAA. Bulky metal-organic framework gels (MOGs) stand out as ideal catalysts for PAA activation owing to their multiple advantages, including large surface areas, high porosity, and hierarchical pore systems. Herein, a bimetallic hierarchical porous structure, i.e., FeMn13BTC, was synthesized through a facile one-pot synthesis method and employed for PAA activation in ofloxacin (OFX) degradation. The optimized FeMn MOG/PAA system exhibited efficient catalytic performance, characterized by 81.85% OFX degradation achieved within 1 h owing to the specific hierarchical structure and synergistic effect between Fe and Mn ions, which greatly exceeded the performance of the only PAA-catalyzed system. Furthermore, the FeMn MOG/PAA system maintained >80% OFX degradation in natural water. Quenching experiments, electron spin resonance spectra, and model molecular degradation revealed that the primary reactive oxygen species responsible for the catalytic effect was R-O•, especially CH3C(=O)OO•, with minor contributions of •OH and 1O2. Overall, introduction of the MOG catalyst strategy for PAA activation achieved high antibiotic degradation performance, establishing a paradigm for the design of heterogeneous hierarchical systems to broaden the scope of catalyzed water treatment applications.

Accelerated removal of naproxen in the iron-based peracetic acid activation system by chloride ions: Enhancement of reactive oxidative species via the formation of iron-chloride complexes

Iron-based PAA activation process is a promising advanced oxidation process for water decontamination which depends on Fe(II) as the main reactive site for PAA activation, resulting in various reactive oxidative species (ROSs) generation. For practical application, the impact of water matrix chloride ion (Cl-) on ROSs production and contaminants removal should be carefully considered. In this study, it's found that the introduction of Cl- (0.1-10 mM) could significantly enhance the reaction rate of the rapid stage (kobs1) up to 2.15 times at the initial pH of 4.25 in the Fe(II)/PAA system. Further studies demonstrated that the improved removal capacity of NAP resulted from Cl- induced R-O• generation as indicated by the exposure dose of R-O• increasing from 7.74 × 10-11 M•s to 1.44 × 10-10 M•s, rather than chlorine-containing radicals' generation. DFT calculation results suggested that the formed Fe(II)-Cl- complexes could easily activate PAA to generate more ROSs for NAP removal. Moreover, Fe(II)/PAA treatment can alleviate the biological toxicity of pollutants via both the Escherichia coli test and toxicity assessment. The obtained new knowledge manifested that Cl- can boost ROSs generation and conversion in iron-based PAA systems, providing guidance for the efficient decontamination of chlorine-containing sewage with PAA-based AOPs.

Composite material derived from ZIF-67 and biochar promotes ozonation of 4-nitrophenol

Cobalt 2-methylimidazole (ZIF-67) have abundant nitrogen and cobalt elements, which can be used as an excellent precursor for catalyst synthesis. In this study, a new Co, N co-doped carbon-based catalyst (Co-N-BC) was synthesized from ZIF-67 and biochar, which can significantly improve the degradation of 4-nitrophenol (4-NP) in catalytic ozonation. The mineralization rate of 4-NP achieves 65.8% within 60 min. The catalyst showed high recycling stability in the four cycles of reuse experiment. Different operating parameters, such as solution pH, the concentration of O3 and 4-NP, have been studied in the Co-N-BC catalytic ozonation. O3, O2-· and ·OH are determined as the main reactive species for 4-NP degradation, and ·OH is especially responsibly for 4-NP mineralization. The existence of inorganic ions, such as Cl-, NO2-, CO32- and PO43-, all significantly inhibited the degradation of 4-NP to different extend, respectively. The effect of substituent on a series of organics with similar structure of 4-NP was also investigated in Co-N-BC catalytic ozonation. This study provides a new composite material for heterogeneous catalytic ozonation, which is very promising in 4-NP contained complex wastewater treatment.

Adsorption of hexavalent chromium, Rhodamine B and Congo red simultaneously in aquatic by zeolitic imidazolate framework coupling carbon nanotubes

Zeolitic imidazolate framework/carbon nanotube (ZIF-67/CNTs) was prepared by precipitation method. ZIF-67/CNTs maintained the characteristics of large specific surface area and high porosity of ZIFs, showing stable cubic structure. The adsorption capacities of ZIF-67/CNTs for Cong red (CR), Rhodamine B (RhB) and Cr(VI) were 36.82 mg/g, 1421.29 mg/g and 716.67 mg/g under the conditions of 2:1, 3:1 and 1:3 masses of ZIF-67 and CNTs, respectively. The optimum adsorption temperature of CR, RhB and Cr(VI) were 30 °C, and the removal rates at the adsorption equilibrium were 81.22%, 72.87% and 48.35%. The adsorption kinetic model of the three adsorbents on ZIF-67/CNTs was consistent with the quasi-second order reaction model, and the adsorption isotherms were more consistent with adsorption law of Langmuir. The adsorption mechanism for Cr(VI) was mainly electrostatic interaction, and the adsorption mechanism for azo dyes was the combination of physical and chemical adsorption. This study would provide theoretical basis for further developing metal organic framework (MOF) materials for environmental applications.

Transformation of dissolved organic matter during UV/peracetic acid treatment

Peracetic acid combined ultraviolet (UV/PAA) process has garnered growing attention as a promising advanced oxidation process (AOP) for wastewater treatment, but the corresponding transformation of ubiquitous dissolved organic matter (DOM) under this AOP remains unknown. This study systematically investigated the changes in characteristics and composition of DOM under UV/PAA, as well as the underlying mechanisms by multiple spectroscopic analyses and Fourier transform ion cyclotron resonance mass spectrometry. UV/PAA treatment dramatically decreased aromaticity, apparent molecular weight, and fluorescent abundance of DOM with the production of more oxidized and saturated compounds. The reactive species (i.e., ^·OH and CH₃C(O)O^·/CH₃C(O)OO^·) in UV/PAA contributed primarily to DOM changes but showed different reaction selectivity and mechanisms. ^·OH reacts with DOM components and mainly yields oxygenation products via a radical addition pathway. Comparatively, the electron transfer route is more likely to occur in CH₃C(O)O^·/CH₃C(O)OO^·-induced DOM transformation. Aside from oxygenation products, electron transfer could exclusively generate decarboxylation products and distinguishes CH₃C(O)O^·/CH₃C(O)OO^·-based AOPs from ^·OH-based AOPs. These findings significantly improve knowledge of DOM alterations under UV/PAA AOP at both the bulk and molecular levels.

Modulating the electron structure of Co-3d in Co3O4-x/WO2.72 for boosting peroxymonosulfate activation and degradation of sulfamerazine: Roles of high-valence W and rich oxygen vacancies

Sulfate radical (SO₄^•-)-based heterogonous advanced oxidation processes (AOPs) show promising potential to degrade emerging contaminants, however, regulating the electron structure of a catalyst to promote its catalytic activity is challenging. Herein, a hybrid that consists of Co₃O_4-x nanocrystals decorated on urchin-like WO_2.72 (Co₃O_4-x/WO_2.72) with high-valence W and rich oxygen vacancies (OVs) used to modulate the electronic structure of Co-3d was prepared. The Co₃O_4-x/WO_2.72 that developed exhibited high catalytic activity, activating peroxymonosulfate (PMS), and degrading sulfamerazine (SMR). With the use of Co₃O_4-x/WO_2.72, 100 % degradation of SMR was achieved within 2 min, at a pH of 7, with the reaction rate constant k₁ = 3.09 min^-1. Both characterizations and density functional theory (DFT) calculations confirmed the formation of OVs and the promotion of catalytic activity. The introduction of WO_2.72 greatly regulated the electronic structure of Co₃O_4-x. Specifically, the introduction of high-valence W enabled the Co-3d band centre to be closer to the Fermi level and enhanced electrons (e^-) transfer ability, while the introduction of OVs-Co in Co₃O_4-x promoted the activity of electrons in the Co-3d orbital and the subsequent catalytic reaction. The reactive oxygen species (ROS) were identified as •OH, SO₄^•-, and singlet oxygen (¹O₂) by quenching experiments and electron spin resonance (EPR) analysis. The DFT calculation using the Fukui index indicated the reactive sites in SMR were available for an electrophilic attack, and three degradation pathways were proposed.